Excel 2007 :: Screen Gets Distorted And Data Disappears

Aug 12, 2014

Excel 2007. Basically, I'll be working in excel and all of a sudden, my screen sort of blurs; gets scramble like below. This only happens when using Excel.

Myscreen.PNG

View 4 Replies


ADVERTISEMENT

Excel 2007 :: Chart Disappears When Copy Tab Or Move To Another Workbook?

Apr 15, 2011

In versions prior to Excel 2007, I was always able to copy a chart when I copied a tab. However, when I copy a tab in 2007, the data copies fine, but the chart does not. Something similar happens when I try to move a tab with a chart on it to another workbook.

View 5 Replies View Related

Excel 2007 :: Sheet Tabs At The Bottom Of Screen No Longer There

Apr 26, 2012

I am using Excel 2007. When I pulled up a workbook today with 3 sheets in it, all that comes up is the first sheet and the sheet tabs at the bottom of the screen are no longer there. I must have accidentlly pushed some button, but I can't get to the other sheets. I really need the information on the other sheets. How do I restore the view that shows the sheet numbers at the bottom?

View 2 Replies View Related

Excel Dashboard - How To Get Data From Other Pages Onto First Screen

Feb 24, 2014

I want to get into dashboards, I've looked at video on YouTube etc. I now know how to design them but what do I need to know is what search phrase etc I need to use cos I'm a bit confused. How do I get data from other pages onto first screen where dashboard is.

View 3 Replies View Related

Excel 2013 :: Formula Disappears Once It Calculates?

Jul 17, 2013

using Office Professional Plus (2013). Within my spreadsheet, I have a series of progressive dates to be used in as a timeline. Ultimately, what I need to accomplish is that when I change one date, all the proceeding entries update according to my timeline criteria (in this case 3 weeks or 21 days). I created a SUM formula that worked but only calculated one time. Once the calculation completes, the cell drops the formula. I need this to be constant as the dates often change. How do I get the formula to maintain? Further more, is there a better method to accomplish the task at hand other than the SUM option?

View 7 Replies View Related

Data Validation List Default Value Disappears?

Dec 3, 2012

I have a large spreadsheet with many cells that have a drop down list using data validation. The list is a named range with no blanks. Most of the cells show the default I have set. However, sometimes when changes occur in cells next to one with a drop down list, the default value mysteriously disappears and the cell appears blank. The functioning of the drop down lists is intact, it's just that the cell appears blank.

View 5 Replies View Related

Data Validation Disappears When Re-opening Spreadsheet?

Aug 23, 2013

I add data validation into 4 columns and when i re-open the spread sheet after saving it, it clears all validation.

Although it clears the validation, the place where it gets the data from is still there. i have also unfroze panes and is still clearing data validation

Attached is the spread sheet. The data validation is in columns A, G, H and I on the 'unsourced' page and is getting the data frfom the 'Sheet1' Page.

View 2 Replies View Related

Maximum Full-screen Mode In 2007

Dec 29, 2009

how do i achieve maximum full-screen mode in excel 2007....
i would like if only main menu tabs are visible (File|Insert|Page Layout...etc)...
Also is it possible to hide the numerics and alphabets numbers of Rows and Columns??

View 9 Replies View Related

Excel 2007 :: Moving Data From One Worksheet To Another Keeping Data And Formatting?

May 5, 2014

I am working on a project that has 5 worksheets. I have been able to figure out everything else I need to do but this has me stumped. I have data in Sheet1 A6, that i want to place in Sheet2 A6, Sheet3 A6, Sheet4 A6 and Sheet5 A6 and keep data and formatting(BOLD AND UNDERLINE). So I change Sheet1 A6 and the other 4 sheets change also. I'm using Microsoft Excel 2007.

View 1 Replies View Related

Excel 2007 :: Import Data From Worksheet Into Another And Group Data Into Sections

Mar 2, 2012

I want to be able to run a macro that will export some of the data from a worksheet called Generated Report into another worksheet called Matrix. The data will be taken Generated REport and grouped into sections of the worksheet. These sections will be defined by the BRID value.

The Data that i want to export will be from the first 5 columns within the Generated Report(note there are other columns which data is not required from).

The following columns will be exported from Generated Report -

BRID,Requirement, Bug Description, Bug ID and Alt Bug ID.

BRIDRequirement Bug DescriptionBUG ID Alt Bug ID
PQ115 PQ115-Login Bug Description text xihllloloj43712 123
PQ116PQ116-Landing Bug Description text ghghghgoot 43713 126

For Matrix

The data will be imported into Matrix worksheet into the following columns as part of the row headings

- Requirement, Description, Bug ID and VF Bug ID.There will also be other columns (outlined below) which i will use to manually enter data

The data will be grouped and imported into the relevant section by its BRID eg PQ115, PQ116 etc.

I want each section (marked by BRID number)to be separated by row headings.

These row headings are to be generated after populating all data within each BRID number.

When the data has been populated in each row there is a column called 'Status' which contains drop down list boxes which can be assigned.

The default status will be set to 'To Do'. The complete row headings are displayed with Output from Generated Report underneath

BRID Priority Requirment Description BugID Alt Bug ID PC UpdateNotes Actual Result Type of DEfect Test Status Tested by
PQ115 PQ115-Login Bug Description text xihllloloj43712 123 To Do

BRID Priority Requirment Description BugID Alt Bug ID QC UpdateNotes Actual Result Type of DEfect Test Status Tested by
PQ116 PQ116-Landing Bug Description text ghghghgoot43713 126 To Do

So far the macro that i have been using allows me to locate the data for each specific BRID in Generated Report and copy into the corresponding BRID section within the Matrix. I have to repeat this step for each new BRID and i want to be able to whole automate this process.

View 5 Replies View Related

Excel 2007 :: Copying Data And Graphs De-linking Source Data?

Dec 27, 2012

I have a simple reporting sheet where the data for orders place is in one sheet and on the other sheet is an imput box for 'date' and it filters through and presents a table of data and two graphs for the date chosen.

I give a daily report (contents of this sheet) but I also need to leave this sheet available for anyone to open and change to another date.

I want to copy the repor sheet into a new one and email but I want the graphs to remain, not go blank when anyone changes the original sheet.

Excel 2007 / Windows 7.

View 3 Replies View Related

Excel 2007 :: Using Formula On Filtered Data - How To Select Only Visible Data

Jun 1, 2011

I have a 5000 line table I am filtering by a few columns, and I'd like to calculate an exponential trendline value.

=INDEX(LINEST(LN(R1059:R1167),W1059:W1167),1)

But I actually don't want all the values from R1059 to R1167 - I want to select only the displayed values (R1059, R1068, R1077, etc). Is there a way to select only display values to use in a formula? The problem is it would be a lot of manual work to select them all - there are 50 or so instances I would have to select 13 manual values.

I am using Excel 2007 on XP.

View 8 Replies View Related

Excel 2007 :: How To Combine Data Elements Into Single Data Object

Sep 23, 2011

I am building a rather good size userform. It is getting really lengthy code-wise because I want certain things to be enabled and disabled on the form as they click on certain options.

I know I can hard code the lines but so I am trying to come up with some coding elements where I will not have to add 20+ lines of code for everytime I want to add a new feature.

Here is one of the functions that I have, There is going to be several of these:

Private Sub chkMore2_Click()
If chkMore2 = True Then
cboProtocol2.BackStyle = fmBackStyleOpaque
cboApplication2.BackStyle = fmBackStyleOpaque
txtLowPort2.BackStyle = fmBackStyleOpaque
[Code] .......

So If I click chkMore2 ... all of the 2nd elements will be editable. If I click chkMore3 ... then all of the 3rd elements will be editable, etc. etc.

So I tried to play with this code example:

Private Sub CheckBox1_Click()
If CheckBox1 = True Then
Call Changeit(1, "yes")
Else
Call Changeit(1, "no")

[Code] ........

Excel 2007 does not like the .concatenate element.

View 1 Replies View Related

Excel 2007 :: Conditional VBA - Extract Data From Each Tab Into Master Tab Based On Data

Feb 28, 2014

I am looking for VBA code to extract data from each tab into master tab based on data.

I have 3 tabs (inputs)

Tab1 (Dept A-NAME) (RANGE B4:I7)

SL NO
ID
Date
Customer
Start Time
End Time
Trucks
Supervisor

1
A
2/25/2014
Customer 1
10
1
3
ABC

[Code] .....

Tab 2 (Dept B-NAME) (RANGE B4:I11)

SL NO
ID
Date
Customer
Start Time
End Time
Trucks
Supervisor

1
B
2/25/2014
Customer 3
10
1
3
RTY

[Code] .......

Tab 3 (Dept C-NAME) (RANGE B4:I7)

Is it possible to run vba code to get below result in new tab

SL NO
ID
Date
Customer
Start Time
End Time
Trucks
Supervisor
Result

1
A
2/25/2014
Customer 1
10
1
3
ABC
Dept A

[Code] ......

Condition here is date 2/25/2014, is possible when running code message box pops up to ask date, when we give conditional date it extracts those dates.

Excel -2007 & Windows 7

View 7 Replies View Related

Excel 2007 :: Using VBA To Assign Row Of Data - Code Based On Data In That Row

Feb 17, 2012

I have a workbook (excel07) that I use to import data onto our purpose built database. I have some macros to sort the data and send it to the correct columns however the one stage I still have to do manually is assign each row its own unique sorting Code (in a bespoke column "B2:B999").

These are objectives and the code should contain three seperate parts (part 1a and b do not need to be seperated);

1a. The characters "PO" should be the first in the code (for sorting purposes)

1b. The persons initials (first letter of the first name and last name) found in column J2:J999. [They are sorted by name so It would also be good to add a number after the initials seperated by a space incase of multiple objectives however I could defintly live with typing these in manually]

e.g. "Joe Blogs" second objective = JB02

2. The numerical part of the stategic objective they have selected found in column H2:H999. [incase you need this these range from 1.1-1.4, 2.1-2.5,3.1-3.6 and 4.1-4.5 all with a short text strings after which shouldnt be included in the code]

e.g. "1.1 We are Committed to being nice" = 1.1

3. The year they are applicable for which will all be "12/13" however I will need to change this next March.

Therefore the final code should appear as "POJB02 3.1 12/13"

There is a 16 Character limit on these codes but all of that information is needed for sorting, filtering and report generation, the spaces could be replaced by "_" if that makes things easier.

View 5 Replies View Related

Excel 2007 :: Alphanumeric Data Charts

Mar 2, 2014

I'm currently working on a spreadsheet for my husbands work in a school environment. All was going well until I hit a wall with the alphanumeric data of the current uk stats system. Is there any way of getting my 4c...4b...4a...etc. to chart?

View 1 Replies View Related

Excel 2007 :: Extract Data From File

Feb 12, 2014

Extracting data from an excel file, the data needed in lies in one column.

in this line

<GPSPosition pntRef="GPS_Auto_0080" wgsLatitude="33.334329659885" wgsLongitude="44.405736558207" wgsHeight="27.615921">

i need to get a table with three columns shows

wgsLatitude, wgs Longitude , wgsHeight
33.334329659885 ,44.405736558207 , 27.615921
etc

and get rid of all other information

this is an example of the how the file look like

---------Column N -------------------
</Feature>
</GPSPosition>
</GPSSetup>
<GPSSetup id="GPSSetupID_18" GPSReceiverDetailsID="GPS_1" antennaHeight="1.660000" stationName="GPS_Auto_0080">
<GPSPosition pntRef="GPS_Auto_0080" wgsLatitude="33.334329659885" wgsLongitude="44.405736558207" wgsHeight="27.615921">

[code].....

seems from above that there are too many data not needed the only thing need to be exracting is one lies of GPSPosition Line.

View 2 Replies View Related

Excel 2007 :: Find All Names According To Data

Nov 21, 2012

I have a table with names of employees in Column A, the data for each employee is written in columns B, C and D.

I'd like to be able to type in this data in cells E12-E14 and have Excel bring up all of the names in the table that are associated with this data, and preferably separate them with commas.

I'm working with Excel 2007, without VBA/Marcros.

Please see the example file: find_name_example.xlsx

View 7 Replies View Related

Excel 2007 :: How To Combine 2 Sheets Into 1 With Different Data

Jun 13, 2013

Here is basically the problem, I have 2 sheets and want to copy/ paste them like this:

Sheet 1
Name of a product
Data 1
Data 2
Data 3

[Code]....

Can this be done in Excell 2007?

View 5 Replies View Related

Excel 2007 :: Organize Data Into Lists?

Nov 1, 2013

I work as an alternative health practitioner and am making reference lists to use for working with various conditions. So far I've been using MS word and manually typing out everything into lists, but since that document is becoming hugely ungainly to work with (60+ double columned pages) I thought maybe there is an easier way to do this?

So my question is, can I use excel (or another program?) to do these things? And how would I go about doing them?

"Tag" various procedures with symptoms to alleviate. For example, can I tag Scalene trigger points (technique) with the symptoms brachial neuritis, extremity numbness, neck pain, elbow pain, wrist pain, shoulder pain, upper back pain, etc (some techniques will need 25+ symptom tags). Because of the large amount of "tags" I'll need to add, being able to quickly add them (for example, maybe typing them all in one cell separated by commas) is crucial Sort the data by symptom i.e "neck pain" and have all techniques tagged with "neck pain" show up in list form. Transfer all the data I already have sorted into the excel spreadsheet - for example I have a list of 100+ techniques for "neck pain", so I would need to be able to paste that list into excel and tag it with "neck pain" so it would show up along with anything added in excel. Be able to copy/paste the compiled list of techniques for each symptom into a document that I can print out and use as a reference at work. So for instance, be able to search "neck pain" copy the list of techniques for neck pain without including any extraneous data (such as all the tags) and paste it into ms word as text, not a table.

Edit: I have Excel 2007

View 2 Replies View Related

Excel 2007 :: Import Data Through Button

Nov 26, 2011

I want to import data from 1 excel sheet to another sheet in excel 2007 by clicking the button which i was created through.

Developer>insert>forum control>button

View 9 Replies View Related

Excel 2007 :: Splitting Out Data Within Same Cell?

Feb 14, 2012

I have a table in Excel 2007, one set of data in a column contains cells with data such as = AA701 DIS34 5283000, Z00IS0750 Now these AA codes DIS codes 5283 codes and Z00 codes can all be different!! and they are all within the same cell.

What I need to be able to do is find out which AA code which DIS code which 5283 code and which Z00 code is reported within each cell on each row?

So could I split them out into different cells via VBA? or can I do some kind of lookup that picks up a AA code (for example) ?

The constraints I have is this is downloading from a web query, I do not have the ability to alter the way the original data is coming across, I can only alter it once I have received it - refresh and then alter it again.

View 9 Replies View Related

Excel 2007 :: Data Sorting According To Column

Jul 26, 2012

I have some data in a Excel 2007 workbook in the range a1:d100 and I want to sort the data according to "A" column, which is the first column of the range and when I am giving data sort it is prompting to select the column, where as in 2003 it will prompt to select the column but by default it will take the first column of the range, so if we want the first column the we can hit enter key otherwise need to change the column name which will save time.

My question is that whether there is any setting I can make at the time of sorting data and by default it will take the first column of the range.

View 1 Replies View Related

Excel 2007 :: Find Alphanumeric Data?

Sep 26, 2012

I'm running Excel 2007 on Windows 7.

I've got a crude code which searches for multiple alphanumeric data. The code is below:-

Code:
Cells.Find(what:="1kp", _
LookIn:=xlFormulas, _
lookat:=xlWhole, _

[Code]...

I want to make this code more efficient by searching for either 1kp, 2kp or 3kp in one process & 'doing the same thing' at one time. How do I achieve this?

Explained slightly differently, the code should look something like this:- Find 1kp or 2kp or 3kp. Then do something with the found results.

View 1 Replies View Related

Excel 2007 :: Aligning Data In A Table

Sep 27, 2013

I have data below that is misaligned. I would like to know if there is a simple way to automate it's alignment like below

Table:

PC HW
PC
Operating Income

PC MN HW
PC MN
PC
Operating Income

[code].....

View 1 Replies View Related

Excel 2007 :: Merging Data Within Two Columns Into One

Dec 5, 2013

I have two columns

Req | Expiry Date
yes 11/12/2010
yes 08/06/2012
yes 02/07/2017

how do i merge both columns into one.. not losing any data hence

Req Expiry Date
yes 11/12/2010
yes 08/06/2017

I am using excel 2007 ITS FOR WORK!

View 9 Replies View Related

Excel 2007 :: Copy Data From Another Workbook?

Dec 14, 2013

I have two Workbooks

1. Main (where I have a button and I intent to write code and paste the data)

2. Data (where I have data to be copied)

My code so far

Code:
Sub copy()
Dim wbData As Workbook
Dim wbMain As Workbook
Set wbData = Workbooks.Open("path")
Set wbMain = Workbooks.Open("path")
wbData.Sheets(1).Range("A1:A5").copy
wbMain.Sheets(1).Range("A1:A5").PasteSpecial
wbData.Close
End Sub

In the above code the problem is that the file wbMain is already open and when I try to re-open it gives an error and program crashes and if I do not open the file then it gives me the error and says sub or function not defined as wbMain variable is not set.

Second problem:When an error is thrown or I close my files, I lose all the VBA code and module? strange ! how to save modules permanently? using Excel 2007

View 9 Replies View Related

Excel 2007 :: Pop Up Message When Data Is Entered

Dec 19, 2013

2007 Excel spreadsheet. My company currently shares ONE spreadsheet to generate new project numbers (Shown below). My issue is once a new number is assigned, it is supposed to be entered into our accounting software but that doesn't appear to be happening in some cases.

Is there a way that a pop up message can appear when column G is populated (Entered by)? Something like, "please be sure to enter this XYZ".

View 9 Replies View Related

Excel 2007 :: Data Validation With 24:00 Times?

Jan 29, 2014

I have a spreadsheet which monitors the hours employees work - one of the rules is that an employee must have 12 hours rest between shifts...

I am using the below Data Validation formula in column I to highlight when an employee has less than 12 hours rest and an alert to appear

=OR(AND(I4-B4=0.5),AND(I4-B4>=0,I4-B4>=0.5))

Now this works perfectly with the exception of when an employee finishes at say, 18:00hrs on a Friday, and starts at 22:00hrs on a Saturday - Excel Calculates the Rest hours as 04:00, when it should be 28:00

I've had a suggestion to use the following:

=I4+I2-B4-A2>=0.5

(I2 being the saturday date, A2 being the Friday date) - this does work but only for Cell I4, If I copy the Data Validation down the column all cell references change - is there a way to keep the I2 and A2 in the formula without having to retype in every row?

View 1 Replies View Related

Excel 2007 :: Populating Data Based On Two Criteria?

Mar 28, 2014

I'm trying to populate a table based on two different criteria in a another table. On is based on a date and the other the number of a unit. I'm trying to get the data in sheets Week 1 and Week 2 into the format in sheet Example. Is there a way to create a series of functions, filters, etc that I could use to create a macro to do multiple sheets or at least a whole sheet at once? I've been trying to think through it with my limited knowledge of filters and functions

Here is the file with an example and I'm using Excel 2007: Example.xls

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved