Excel 2007 :: Generate Multiple Workbooks With Worksheet Data Source

Jan 17, 2012

I am looking for macro where it can generate multiple workbooks with a single worksheet data source. I have this worksheet with data which is look like this:


This data will be places in 1 workbook for each of line with given file name as page number above those workbooks generated will have same information for each line but at different cell position such as: take this example at line 3


Microsoft Excel 2007
Window 7Pro 64bit

This line could be up to 50 lines of data. I try google search but found most about consolidate multiple workbooks to single worksheet. I do have VBA reference that I refer to from [URL] ......

How to put the information from the worksheet into specific position in the workbooks.

View 1 Replies


Excel 2007 :: Data Connection Between Two Workbooks Locks Source Workbook When Refreshed

Feb 10, 2012


I have 4 workbooks, all of them contain data that is managed by other teams at my company. I need to take all of this data, organize, and concatenate it into one sheet for myself, that I will then reference in other workbooks to various OTHER departments in our company that need the data for certain projects. I have the organization laid out in a lot of very complex formulas so that most of this is automated, and not manual.

I need a solution that can pull data from the 4 workbooks without locking them for use, to allow me to keep my document open all the time, and they can update theirs at their leisure. Everything works fine, until I hit the refresh button. Once this is hit, all of the linked documents are locked and cannot be opened, even in "Read Only" mode. Once I close the master document, the files are free to be opened. I know a workaround for now is that i can not "refresh" the document, but rather close and re open it for changes.

Some steps I have already tried :

1. Create an intermediary file that no one uses, and can be locked all day without a problem. This doesn't work for me since the intermediary file needs to be open to refresh, which locks the original source doc, leaving me in the same place as before.

2.Modify the connection string to display "Mode=Read;" instead of "Mode=Share Deny Read"

3.Create a new connection with "Read" only selected in the Advanced Tab

View 1 Replies View Related

Excel 2007 :: VBA For Print Header For Multiple Sheets From One Source Sheet (but Not All)

Apr 18, 2013

I am working on a "3 worksheet" excel workbook. The first worksheet does not require any header.

I'd like to enter data into the second sheet (say cells A1 and B1), and use VBA to pull from those cells to generate the same custom header for both the second and third worksheets.

For example, I'd like the header to pull "# 123456" from cell A1, and "789" from B1 in sheet two, putting them in a centered header for both sheets two and three (same reference cells from sheet two for both, not new values of A1 and B1 from sheet 3 for sheet 3 header). I'd like to format in a way that looks something like this:



I'm currently running Excel 07, and was able to pull from a cell on one worksheet into that sheet's header but couldn't get it to span multiple sheets.

View 3 Replies View Related

Excel 2007 :: Copying Data And Graphs De-linking Source Data?

Dec 27, 2012

I have a simple reporting sheet where the data for orders place is in one sheet and on the other sheet is an imput box for 'date' and it filters through and presents a table of data and two graphs for the date chosen.

I give a daily report (contents of this sheet) but I also need to leave this sheet available for anyone to open and change to another date.

I want to copy the repor sheet into a new one and email but I want the graphs to remain, not go blank when anyone changes the original sheet.

Excel 2007 / Windows 7.

View 3 Replies View Related

Excel 2007 :: Date Format While Copying Data From Another Source?

Jul 14, 2013

I have some data coming in from another source system which has the date format as "DD-MM-YYYY" but while pasting it to Excel (2007) sheet some date fields has just DD-MM-YY format which disrupts my macro. I did changing the language settings to "English(UK)" ,which i wanted, and changed the same in Excel options as well. But unfortunately it doesn't work.

View 3 Replies View Related

Excel 2007 :: Generate Microsoft Word Document From Data Encoded In Spreadsheet?

Jun 18, 2012

I need to generate a microsoft word document from the data encoded in my excel spreadsheet. I am currently using MS office 2007.

in the Excel Spreadsheet from columns C to F "a) b) c) d)" was not typed but in the word document it automatically appears before the choices encoded in excel. Another thing is that some of the choices typed in the excel spreadsheet are in bold font and I want it to be generated in word document with the bold font as well.

By the way I am planning to use this technique to create a 100 item multiple choice exam for my students as I find using EXCEL to generate the document a lot easier than creating the test manually in WORD.

View 1 Replies View Related

Excel 2007 :: Variable References To Multiple Workbooks?

Jan 10, 2012

i make a lot of "trending" files at work where i link a cell to a seperate workbook where all workbooks are in the same folder.

these workbooks all have the same name with the date at the end

workbook 06-01-2011
workbook 06-02-2011
all the way to
workbook 12-31-2011

usually i use find replace to change the date one at a time, but doing that 365 (x how many cells i have referencing) times is redundant

i have seein INDIRECT of the cell changes but nothing for the workbook name chaning

here is what i am trying to do:
='C:File Path[WorkbookX.xls]Sheet1'!A1
where the X WorkbookX is variable (the date at end of file name)

i have a list of all workbook names or just the dates and would like to do something like:

where D1 is the full path name
='C:File Path[Workbook"D1".xls]Sheet1'!A1
where D1 is the date name

using excel 07 i prefer not to use a macro for how i am doing this but if a macro is the only way then i cannot have it actually open the files to pull the data. i prefer no macro since i set it up for future dates so when the new file is created it automatically updates the reference.

my end result i usually have something like A1=referenced cell from first workbook, A2= cell from 2nd book, etc. sometimes B1 would = a different cell from first workbook and so on if i am trending multiple cells from the workbooks

View 1 Replies View Related

Excel 2007 :: Crashes When Trying To Update Data Source In Pivot Table

Sep 17, 2010

Excel 2007 crashing when trying to up date a data source within a pivot table?

View 3 Replies View Related

Excel 2007 :: Find Source Data Range Of Pivot Table?

Feb 4, 2013

how to find the source data range of a pivot table (that already exists) in Excel 2007?

View 1 Replies View Related

Excel 2007 :: Split Sheet Into Workbooks Using Workbook Template Based On Data In Column A

Oct 5, 2011

I have a workbook that has a sheet called CustInvData, this sheet contains 4,421 rows of invoice transaction data for 178 customers starting on row 2 (headers on row 1). I need to split the transaction data for each customer out into a workbook template based on the customer name in column A. I need each workbook named by the customer name along with a month and year (example: Bellsouth-0911.xls), this should create 178 unique workbooks. And since we sometimes have to go back and rerun invoices for previous months, I'll need to control the month and year manually in the code.

The parsed data needs to be copied to a pre-formatted invoice template. This template has 2 sheets, Sheet1 is called 'Product Summary', this is a table that uses VLOOKUP functions to read the data in Sheet2 called 'Product Details', this is the sheet the parsed data needs to be copied to for each customer invoice. The 'Product Details' sheet has formatted rows 1 thru 11, row 11 being the header row for the data from CustInvData to be copied. So the parsed data needs to start at row 12.

Last, once the data has been copied into the 'Product Details' sheet, I need the data to be SubTotaled at each change in column J (Product) and use the 'Sum' function to add a Subtotal in column L (Retail Price) for each unique product category.

Example data below, I've simplified it (the actual data array spans from columns A to Y)

Customer NameProduct Retail Price


I'm a bit of a novice with macros, but I know Excel pretty well.

Using Excel 2007 running on Windows Vista

View 2 Replies View Related

Extract Data From Multiple Workbooks Into One Worksheet

Apr 15, 2008

I have a folder with an unlimited number of Excel Workbooks. Data within workbooks are in same format - 3 columns of data. I would like to extract the Data in the range (B55:B70) for every workbook, transpose the data and append by rows into one worksheet.

To be clear - I want to take data range B55:B70 from first workbook,transpose and put on first row - take data range from second workbook, transpose and put on second row, repeating for unlimited number of times...

View 8 Replies View Related

Excel 2007 :: Use Macro To Generate A Form

Mar 11, 2012

I have a sheet with 500 rows and 20 columns. I want to put an input box and a button on a different sheet. What I would like to happen is that when you put the criteria in the input box and click the button it opens the form for the row corresponding to the criteria and allows you to edit the 20 columns. Excel 2007.

View 6 Replies View Related

Excel 2007 :: Generate Possible Combination Of 3 Series

Nov 5, 2012

I've 3 series that are

1- From 0-9
2- From 0-3, and
3- From 0-27

I want to generate possible combination of these 3 series in Excel 2007.

I think total combinations would be (10*4*28=1,120)

View 1 Replies View Related

Merging Data From Multiple Non-standardized Workbooks Into One Summary Worksheet

Jun 11, 2014

I am attempting to write code for a macro that can cycle through about 30 excel workbooks and merge the data. getting the raw data on one sheet is not a problem, but I also need to sort similar data into corresponding columns while merging such that all data from the workbooks with a certain column heading will be in a single column with a single heading on the summary sheet. The problem is that the column headings on the source workbooks are not always standardized, i.e. "F high", "high F". Each sheet has several columns that look like the one below, with a header at the top and a series of numbers. (please ignore the dashes, I just used them to line up the columns in this post, in excel each value is in a different cell)

F Low---F High---V Low

My vba skills are very basic, so I have been approaching this problem with a mountain of if..else and InStr commands, which doesn't seem like the best method and isn't working.

View 3 Replies View Related

Excel 2010 :: VLookup Between 2 Workbooks Taking Into Account Duplicates On Source?

Mar 28, 2013

I've got 3 columns of formulas that end up doing what I need, but I'm thinking it could probably be done easier with VBA.

I have 1 book with a sheet I'll call Log & another book with a sheet I'll call Source. On the Log, column E has the first 9 characters of vendor names & /vendor number (ex: EDMUND FI/00250), along with other data out through column P. On Source, the vendor names are in C & a short code for their name is in A.

I need to compare the first 9 characters in Log col E with the first 9 characters in Source col C. When a match is found, I need to return the short code from Source col A. BUT - if there's a duplicate in either Source col C or A, instead I need to return the word VERIFY, preferably with the cell highlighted in red.

Right now, I have, on Source col L:

and in source M:

This gives me the first 9 characters of the vendor name in L & the short code OR VERIFY in M

Then, in Log col R, I have an array formula:

=VLOOKUP(MID(E4,1,9),'[PRETICKET P ADDRESSES working.xls]Paddress'!$L:$M,2,FALSE)

This gives me either the short code or VERIFY from Source M. Also, sometimes it doesn't find a match & it returns #N/A. Then I have to do Conditional Formatting to make the VERIFY cells red & I thought I'd make the error cells be yellow (although I haven't figured out the CF for that yet)

Is there a better way to do this with VBA? I'm working with Excel 2010; just got it & still figuring it out.

View 2 Replies View Related

Excel 2007 :: Automatically Generate Email When Button Is Pushed

Oct 25, 2012

I am using the following piece of VBA code in Excel 2007 to automatically generate an email when a button is pushed:

Sub SendEMail()
Dim Email As String, Subj As String
Dim Msg As String, URL As String
Dim r As Integer, x As Double
r = ActiveCell.Row
'Get the email address
Email = Cells(r, 3)

[Code] .....

The button to launch this code sits in cell AK7. What I would like to do is have the macro copy the email address present in cell E7 into the email address section of my created email. In addition I would like the reference provided in cell AJ7 to appear in the Message Subject part of the generated email in the format " RCS Reference contents of cell AJ7".

View 3 Replies View Related

Excel 2007 :: Ignores Paper Source Selection

Nov 28, 2012

Pretty straightforward: randomly and infrequently, Excel ignores my selection of the rear tray paper source on my MX870 Canon. Able to correct issue only by closing out and re-opening Excel.

View 1 Replies View Related

Excel 2007 :: Moving Data From One Worksheet To Another Keeping Data And Formatting?

May 5, 2014

I am working on a project that has 5 worksheets. I have been able to figure out everything else I need to do but this has me stumped. I have data in Sheet1 A6, that i want to place in Sheet2 A6, Sheet3 A6, Sheet4 A6 and Sheet5 A6 and keep data and formatting(BOLD AND UNDERLINE). So I change Sheet1 A6 and the other 4 sheets change also. I'm using Microsoft Excel 2007.

View 1 Replies View Related

Excel 2007 :: Import Data From Worksheet Into Another And Group Data Into Sections

Mar 2, 2012

I want to be able to run a macro that will export some of the data from a worksheet called Generated Report into another worksheet called Matrix. The data will be taken Generated REport and grouped into sections of the worksheet. These sections will be defined by the BRID value.

The Data that i want to export will be from the first 5 columns within the Generated Report(note there are other columns which data is not required from).

The following columns will be exported from Generated Report -

BRID,Requirement, Bug Description, Bug ID and Alt Bug ID.

BRIDRequirement Bug DescriptionBUG ID Alt Bug ID
PQ115 PQ115-Login Bug Description text xihllloloj43712 123
PQ116PQ116-Landing Bug Description text ghghghgoot 43713 126

For Matrix

The data will be imported into Matrix worksheet into the following columns as part of the row headings

- Requirement, Description, Bug ID and VF Bug ID.There will also be other columns (outlined below) which i will use to manually enter data

The data will be grouped and imported into the relevant section by its BRID eg PQ115, PQ116 etc.

I want each section (marked by BRID number)to be separated by row headings.

These row headings are to be generated after populating all data within each BRID number.

When the data has been populated in each row there is a column called 'Status' which contains drop down list boxes which can be assigned.

The default status will be set to 'To Do'. The complete row headings are displayed with Output from Generated Report underneath

BRID Priority Requirment Description BugID Alt Bug ID PC UpdateNotes Actual Result Type of DEfect Test Status Tested by
PQ115 PQ115-Login Bug Description text xihllloloj43712 123 To Do

BRID Priority Requirment Description BugID Alt Bug ID QC UpdateNotes Actual Result Type of DEfect Test Status Tested by
PQ116 PQ116-Landing Bug Description text ghghghgoot43713 126 To Do

So far the macro that i have been using allows me to locate the data for each specific BRID in Generated Report and copy into the corresponding BRID section within the Matrix. I have to repeat this step for each new BRID and i want to be able to whole automate this process.

View 5 Replies View Related

Excel 2007 :: Generate Single Sheet Workbook And Save To Sharepoint Site

Jan 4, 2012

Automating Excel from Access, I'm attempting to generate a single sheet workbook and save to a Sharepoint site. This process works fine on my machine (XL2007, XP), but on a coworkers computer (XL2003, XP), the code throws a 1004 error on the save as line. However, the really odd thing is that stepping through the code doesn't throw an error on the coworkers machine.

Here's the sub being ran; the line it errors out on is the first branch in the .saveas block.

Private Const csSharePointSaveAs = "\sharepoint-us.mycompany.comsitesfinance adminlah blahlah-blahCustomer Publication Tracking.xls"

Private Sub PublishXLtoMOSS()
Dim objXL As Excel.Application 'Object
Dim wb As Excel.workbook 'Object
Dim ws As Excel.Worksheet 'Object
Dim rs As DAO.Recordset
Dim i As Long

'Set objXL = CreateObject("Excel.Application")

[Code] ...........

View 1 Replies View Related

Excel 2010 :: Data From Multiple Workbooks Into Master Workbook

Jul 9, 2012

I got a master format in xl2010 to collect data, which is being circulated between my team. members fill in their respective data n mail back the file with their name attached to file name. i want to creat a macro which can copy the data from every members file to master file.

View 1 Replies View Related

Excel 2007 :: Workbook Use One Data Connection With Different SQL Query For Each Worksheet?

Oct 13, 2013

I'm trying to build a workbook (2007) with multiple worksheets where each worksheet corresponds to a different query/dataset pulling data from the one database.

I would have expected that you could define the one data connection object and then specify the SQL that each worksheet table will invoke. The apparent structure of having the query coupled to the connection object is confounding me. I'm therefore trying to set up a separate connection for each of the worksheets and Excel is getting tied up in knots.

View 2 Replies View Related

Excel 2007 :: Viewing SQL Statements Without Being Connected External Date Source

Jun 3, 2012

I now have XL 2007 but no longer work at the same place so do not have access to the external data source. I would like to view the SQL statements that I wrote back then but keep getting error that I am not connected to external data source and so cannot see my sql statements. I have MS Query 2007.

View 1 Replies View Related

Excel 2007 :: Textbox Control Source Linked To Cell In Spreadsheet?

Oct 10, 2013

I have a userform with a textbox and would like the user to type inside the textbox which in turn send the text typed to a cell on my spread sheet say sheet 1 cell ref A1. I am writing the following into the control source Sheet1!A1 but the control source does not except this. I am using excel 2007 .

View 2 Replies View Related

Generate Multiple Worksheets From One Worksheet

May 17, 2006

I have a single worksheet containing information related to cellular charges for our company. One of the columns is titled GL Dept, and I need to separate the spreadsheet out into multiple sheets. Each sheet needs to have only the rows for each unique department so they can be distributed to each department head.

View 6 Replies View Related

Excel 2007 :: Pull Data Into A Cell From Another Worksheet That Has Conditional Formatting?

Jul 20, 2012

I have a Workbook (Test 1) with several columns A-S. I'd like to be able to continue to add data into Test 1, and have some of the data pulled into a new Workbook (Test 2). Basically pulling data from Test 1, cols. D, L, J, E, I, C, K, Q and S - into the new workbook Test 2.

Some of the columns in Test 1 have conditional formatting and data validations, but I need the data in these columns to be replicated into Test 2 - without having to copy/paste between the 2 workbooks.

I figured how to do this in Excel 2010, but my office is still using 2007 and I can't seem to get it to work....

View 1 Replies View Related

Excel 2007 :: Source Date Sorting Into Format Used For Pivot Table / Chart?

Sep 24, 2011

I am stuck trying to sort data that looks like the following, into a format that I can use as source data for pivot tables/charts.

DateArticleContentLapseCurrentCurrentCurrentLapseLapseCurrentCurrent612-SepRelieving 40 years - Oct 15, 1972
Thick Haze continues to blanket MalaysiaHistory42712-SepRelieving 40 years - May 5, 1972
All Sharifah wants is a pair of legsHistory1222812-SepA man and his agonyHistory3223912-SepA lesson on Sept 16History22Sheet2

I will need to group Data multiple ways. However, I cant work out a good way to sort it. Can I have a suggestion on layout that I will be able to arrange data appropriately.

View 2 Replies View Related

VBA Code Error - Extract Data From Multiple Workbooks To Single Excel Spreadsheet

Mar 28, 2014

I have a folder with multiples excel sheets

Destination : C: Project CustomerExcel

I would like to extract and compile the information contained in these cells:
a5,c5,a6,c6,c7,a14,g14,e16,g16,e18,i18,a20,g20,h22,j22,h24,l24 all the sheets.

New sheet would contain the information of each sheet eg. Column A2= file name

And Row B2 to R2 or whatever will be the corresponding cells mentioned above for each cell. The code I have only brings back the file name but only a5 from the range but not the rest.

Sub MergeAllWorkbooks()
Dim SummarySheet As Worksheet
Dim FolderPath As String
Dim NRow As Long
Dim FileName As String
Dim WorkBk As Workbook
Dim SourceRange As Range

[Code] .....

View 5 Replies View Related

Excel 2010 :: Merging Data From Multiple Workbooks To Single Master Book?

Feb 16, 2012

We have a master worksheet, and I cant let staff see it, but I want them to update 'their bits' themselves, rather than email the admin staff and let them update the master sheet..

every job is on its own row and contains a unique ID.

is there a way i can merge their data in to the correct row and column(s) on the master sheet?

i've been playing with datasources etc

Excel 2010

View 2 Replies View Related

Excel 2007 :: Combobox List Filling And Export Selected Data To Another Worksheet?

Mar 20, 2014

I have a combo-box in a Multipage control. Now I want to get the combo-box populated with list in 2 columns from 2 different consecutive columns from the same worksheet (Product List). Now, Once the list gets populated, user will be selecting his choice from the list, which is then needs to get copied to another worksheet (Order Placed). Both worksheets exist in the same or one spreadsheet.

I am trying to make it work with the following code. I am able to see 2 columns but with no data getting populated. I am working in MS Excel 2007.

[Code] .....

View 3 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved