Excel 2007 :: Import Data From Worksheet Into Another And Group Data Into Sections
Mar 2, 2012
I want to be able to run a macro that will export some of the data from a worksheet called Generated Report into another worksheet called Matrix. The data will be taken Generated REport and grouped into sections of the worksheet. These sections will be defined by the BRID value.
The Data that i want to export will be from the first 5 columns within the Generated Report(note there are other columns which data is not required from).
The following columns will be exported from Generated Report -
BRID,Requirement, Bug Description, Bug ID and Alt Bug ID.
BRIDRequirement Bug DescriptionBUG ID Alt Bug ID
PQ115 PQ115-Login Bug Description text xihllloloj43712 123
PQ116PQ116-Landing Bug Description text ghghghgoot 43713 126
The data will be imported into Matrix worksheet into the following columns as part of the row headings
- Requirement, Description, Bug ID and VF Bug ID.There will also be other columns (outlined below) which i will use to manually enter data
The data will be grouped and imported into the relevant section by its BRID eg PQ115, PQ116 etc.
I want each section (marked by BRID number)to be separated by row headings.
These row headings are to be generated after populating all data within each BRID number.
When the data has been populated in each row there is a column called 'Status' which contains drop down list boxes which can be assigned.
The default status will be set to 'To Do'. The complete row headings are displayed with Output from Generated Report underneath
BRID Priority Requirment Description BugID Alt Bug ID PC UpdateNotes Actual Result Type of DEfect Test Status Tested by
PQ115 PQ115-Login Bug Description text xihllloloj43712 123 To Do
BRID Priority Requirment Description BugID Alt Bug ID QC UpdateNotes Actual Result Type of DEfect Test Status Tested by
PQ116 PQ116-Landing Bug Description text ghghghgoot43713 126 To Do
So far the macro that i have been using allows me to locate the data for each specific BRID in Generated Report and copy into the corresponding BRID section within the Matrix. I have to repeat this step for each new BRID and i want to be able to whole automate this process.
I am importing data into an Excel 2007 worksheet from an online form. They are answers to 30 questions for up to 250 respondents. I was expecting to import one row of data for each respondent however the data is importing in a step like manner as below
Q1Q2Q3 AF169856 Y AF169856N AF169856N AF145723 N AF145723Y AF145723N
Any formula/solution to bring all of these responses into one line for each respondent ?
I'm using excel 2007 and I'm trying to import data from a .txt file into excel and analyze the data. One of the columns in the .txt file contains descriptions for each row and its in multiple rows. Is there a way to import the .txt file so that it will show a description for each row in one cell?
I imported the data into excel but the issue is the description.
I am working on a project that has 5 worksheets. I have been able to figure out everything else I need to do but this has me stumped. I have data in Sheet1 A6, that i want to place in Sheet2 A6, Sheet3 A6, Sheet4 A6 and Sheet5 A6 and keep data and formatting(BOLD AND UNDERLINE). So I change Sheet1 A6 and the other 4 sheets change also. I'm using Microsoft Excel 2007.
I currently have a userform, and on commandbutton_click, it performs the following code that adds a column in a access table to a combobox(cbList)
Private Sub CmdName_Click() Dim rstName As ADODB.Recordset Dim strClientDatabase As String, strConnectionString As String strClientDatabase = ActiveWorkbook.Path & "9001.mdb"......
After its listed on the combo box, upon commandbutton_click on another button, i wish to extract a particular record, based on the selection made on the combobox(cbList). This is where im having problems caused i have no idea how to do so. I just want it to extract the particular record row, based on cbList, and insert it into range A100:D100 in a particular worksheet. It is then updated and added to a listbox which ive already done the coding for, and with another button click it would add the details in the listbox into the appropriate location i wish to.. The only place im stuck is with extracting the data from access into a A100:D100 range in any worksheet. what ive come up with, but is incomplete is :
Private Sub CmdImport_Click() Dim adoRS As ADODB.Recordset Dim strSQL As String Dim strClientDatabase As String, strConnectionString As String strClientDatabase = ActiveWorkbook.Path & "9001mdb" .........
I have a workbook which, amongst several worksheets, also includes 12 blank worksheets (one for each month of the year).
Is it possible to have a macro that will (a) first prompt the user to select an excel file to import (the excel files to import are provided each month and only have one tab); then (b) select which worksheet to import the data (values only) from the selected file into.
I am using Excel 2010 64-bit (with SP2 and all other updates installed).
I have a worksheet where some cells have a yellow background, based on conditional formatting of what is in column A. (Note that data in column A changes, so the row can sometimes be yellow and sometimes be white.)
I need to sort this worksheet as follows:
1. By background color, so yellow is on top, white is on bottom. 2. Then, within the yellow rows, data in column J. 3. Then, within the white rows, data in column A.
Currently, I do this manually by sorting the entire worksheet by column A, then selecting only those rows that are yellow and sorting by column J.
Is there a way to combine these steps, perhaps with a macro?
I initially thought to make each "background color" its own table, but since column A can change and thus the background color of a row can change, I need to be able to have rows move from yellow section to white section. I don't think having two separate tables allows that.
I'm trying to build a workbook (2007) with multiple worksheets where each worksheet corresponds to a different query/dataset pulling data from the one database.
I would have expected that you could define the one data connection object and then specify the SQL that each worksheet table will invoke. The apparent structure of having the query coupled to the connection object is confounding me. I'm therefore trying to set up a separate connection for each of the worksheets and Excel is getting tied up in knots.
I am looking for macro where it can generate multiple workbooks with a single worksheet data source. I have this worksheet with data which is look like this:
This data will be places in 1 workbook for each of line with given file name as page number above those workbooks generated will have same information for each line but at different cell position such as: take this example at line 3
Microsoft Excel 2007 Window 7Pro 64bit
This line could be up to 50 lines of data. I try google search but found most about consolidate multiple workbooks to single worksheet. I do have VBA reference that I refer to from [URL] ......
How to put the information from the worksheet into specific position in the workbooks.
I have a Workbook (Test 1) with several columns A-S. I'd like to be able to continue to add data into Test 1, and have some of the data pulled into a new Workbook (Test 2). Basically pulling data from Test 1, cols. D, L, J, E, I, C, K, Q and S - into the new workbook Test 2.
Some of the columns in Test 1 have conditional formatting and data validations, but I need the data in these columns to be replicated into Test 2 - without having to copy/paste between the 2 workbooks.
I figured how to do this in Excel 2010, but my office is still using 2007 and I can't seem to get it to work....
I have a combo-box in a Multipage control. Now I want to get the combo-box populated with list in 2 columns from 2 different consecutive columns from the same worksheet (Product List). Now, Once the list gets populated, user will be selecting his choice from the list, which is then needs to get copied to another worksheet (Order Placed). Both worksheets exist in the same or one spreadsheet.
I am trying to make it work with the following code. I am able to see 2 columns but with no data getting populated. I am working in MS Excel 2007.
I have a tedious task of copy/paste from our website. have a look at below sample data. I have around 1500 rows of data like this.
Sheet1 A B
Column A has input data which i need to copy and paste in a web form. Column B will have results scrapped form webpage[ URL]. This webpage will need login details
If a code can be written which take value form column A of spreadsheet and paste in webpage like shown in above image and hit search button. Next webpage will be loaded with number of results like shown in below. Take the number of results and paste in column B of spreadsheet.
I have a workbook that contains an 'AllData' sheet. That sheet has 6 columns titled "category, keyword, bid, advertisers, search vol, online". Each category has its own worksheet and i want to put the data for each category onto the corresponding worksheet. I am having a difficult time describing this so I have attached a brief example. I have to do this for 145 categories so I would much prefer to do it automatically rather than manually.
I've created an Auto_Run macro that imports a CSV file into a specified worksheet. That worksheet is referenced by VlookUp in another worksheet within the workbook. Everything works perfectly EXCEPT, in the midst of running the macro, the user is prompted to (RE)choose the csv file already specified in the macro. Neither the folder nor the filename ever changes, so I'm not sure why I have to keep indicating the file every time the macro runs.
In my spreadsheet (27,000 + rows), there are sections (multiple rows) that are duplicates of other sections. A section is a header row followed by other rows of data.
The number of rows in each in section can vary from 5-20 – therefore, you cannot use the number of rows as a criteria.
However, each section has a header row that contains a four digit number. The following is an example of two such sections:
Basic -- Zero Line ==> Zero Line ID=7076 (submitted by Calvin Campbell)
one half Square Thru
As you will notice the header row contains an ID number. Every header contains “ID=” followed by the four digit ID number.
I need a macro that will identify the duplicate IDs and their sections and delete the duplicate rows of data.
I mention the following – which may or may not be useful. - Not only are the header rows duplicates but the content of the entire section is duplicate - There are no blank rows in the spreadsheet - Entire rows may be deleted (not just specific cells) - The data will be in Column A - There’s only one duplicate of any given ID
There are a total of 2716 sections. It has been determined that 201 of them are duplicates. I can provide the 201 duplicate ID’s if needed.
I have a simple reporting sheet where the data for orders place is in one sheet and on the other sheet is an imput box for 'date' and it filters through and presents a table of data and two graphs for the date chosen.
I give a daily report (contents of this sheet) but I also need to leave this sheet available for anyone to open and change to another date.
I want to copy the repor sheet into a new one and email but I want the graphs to remain, not go blank when anyone changes the original sheet.
I have a 5000 line table I am filtering by a few columns, and I'd like to calculate an exponential trendline value.
But I actually don't want all the values from R1059 to R1167 - I want to select only the displayed values (R1059, R1068, R1077, etc). Is there a way to select only display values to use in a formula? The problem is it would be a lot of manual work to select them all - there are 50 or so instances I would have to select 13 manual values.
I have a workbook (excel07) that I use to import data onto our purpose built database. I have some macros to sort the data and send it to the correct columns however the one stage I still have to do manually is assign each row its own unique sorting Code (in a bespoke column "B2:B999").
These are objectives and the code should contain three seperate parts (part 1a and b do not need to be seperated);
1a. The characters "PO" should be the first in the code (for sorting purposes)
1b. The persons initials (first letter of the first name and last name) found in column J2:J999. [They are sorted by name so It would also be good to add a number after the initials seperated by a space incase of multiple objectives however I could defintly live with typing these in manually]
e.g. "Joe Blogs" second objective = JB02
2. The numerical part of the stategic objective they have selected found in column H2:H999. [incase you need this these range from 1.1-1.4, 2.1-2.5,3.1-3.6 and 4.1-4.5 all with a short text strings after which shouldnt be included in the code]
e.g. "1.1 We are Committed to being nice" = 1.1
3. The year they are applicable for which will all be "12/13" however I will need to change this next March.
Therefore the final code should appear as "POJB02 3.1 12/13"
There is a 16 Character limit on these codes but all of that information is needed for sorting, filtering and report generation, the spaces could be replaced by "_" if that makes things easier.
I would like to extract some text from a word file and transfert it into an excel spreadsheet. My text is always presented in the same way. First there is a line with some data (see exemple bellow). I have no problem to extract them using the macro bellow even it's not perfect.
My problem is on the main text. I weed to keep the format or at least the different paragraphes as when you copy text in word and past it in the formula bar (or press F2).
Here is an exemple of my word file
Code : XXX1- Abrege : DGS45 - Type : D - ADICAP : PHXT5847
Ii have a UserForm with a ComboBox in it. the selections in the box are
0 5 10 15 20 25 30
I have 7 shapes in Worksheets("Interface") and renamed each shape caution1 through caution7
What i need is when i click on continue in my userform each shape will change according to the selection.
if 5 is selected all caution shapes will read, Caution flag is out 5 minute break if 10 is selected all caution shapes will read, Caution flag is out 10 minute break if 15 is selected all caution shapes will read, Caution flag is out 15 minute break and so on
I have a stripped down data source for debugging purposes. I only have 4 rows of data for test purposes. The dates are formatted as dates.
When I create the pivot table the dates become my column values. When I select the first date in the pivot table the Group By Field menu option is grayed out. I tried setting a tabular format but didn't work.
I am using Excel 2007 with a WIN XP OS…. My objective is to color code each cell in Column F within each sub-group based on the following instructions:
1) Column F contains a percentage…. Each sub-group in Column F totals 100%.... Each sub-group is separated as shown on the enclosed sample. 2) Starting with the highest percentage, followed by the next highest, (etc.), I want to sum each subsequent cell until reaching a target threshold (total sum) of 62%.... All cells in this grouping to be highlighted “yellow”. 3) Once the 62% target threshold is reached, the very next highest subsequent cell percentage is highlighted “light olive”…. If there is a tie, the lower number shown in Column E serves as the tie-breaker. 4) All remaining cells within the sub-group are highlighted “light brown” including those denoted by 0%. 5) Finally, if the cell is blank and absent of a % call out, then no highlight is required.
I process a daily spreadsheet having typically in excess of 1000 rows and in turn, I’m looking for a method to automate the color coding….
I found a good piece of code to import data from text files into excel. they are delimited
I keep getting an overflow error, and then I get the error that the file is already open?
Sub OpenTextFiles() Dim strFiles() As String Dim strFName As String Dim strFPath As String Dim IntFile As Integer Dim sep As String 'define the directory strFPath = "C:UsersXXXXXDesktopHOLDINGTEXT into Excel"