Excel 2007 :: Write Selections From Listbox To Cell?
Oct 9, 2011
When I attempt to extrapolate and modify the code I get nothing but error messages. I've also looked through my two Excel 2007 books (each of them 1,000+ pages long) and there is no mention of this subject anywhere.
I am running Excel 2007. I have a multiselect listbox in a worksheet (not a user form). I want a user to be to be able to select multiple items from that listbox and when the the user moves out of the listbox (i.e., when the focus is no longer on the listbox), I want the selections to be copied into a cell on the same worksheet with each of the selections separated by a comma.
So for example, if the listbox (named "ListBox1") contained the following items...
North
East
South
West
...and the user selected both "North" and "West" from the listbox, the following text would get automatically written into cell A2 in the same worksheet after the user move outside of the listbox...
North, West
I know enough VBA to be dangerous (usually just tweaking code written by the macro recorder), but this one is eluding me. My two questions are:
1. What is the VBA code required to give me the result I'm looking for?
2. How would that code be called/where does it reside in the workbook? For example would I put the code in a macro and associate that macro to the listbox object??
View 6 Replies
ADVERTISEMENT
Aug 9, 2013
how do I save multiple items selected from a userform listbox to a single cell on a worksheets? How do I have those values display in a listbox on a userform for editing data sets?
View 2 Replies
View Related
Aug 17, 2013
I have created a worksheet with Excel 2007, which includes a pull down list. Within this list are 2000 unique numbers in a separate worksheet this data is pulled from. Is there a way to dim or change the color of numbers previously used so that when the list is used again, it is easier to see where I left off?
View 1 Replies
View Related
Feb 26, 2014
How to Write a Macro for set a expiry date for Excel 2007 File.
View 3 Replies
View Related
Apr 19, 2006
I have a userform with multiple buttons and a listbox. When any button is clicked on, a listbox is created. The user selects various items on the listbox. Then the user clicks another button and selects other items based on a new list. If user goes back to click the original button, the original list shows up, but the selected items are not highlighted. Is there any way to keep those original selections highlighted (selected)?
View 9 Replies
View Related
May 2, 2006
On a multiselect listbox, is there any way the user can select a "block" of selections, instead of having to select them one by one? The list box I have has about 100 choices and it would be possible to select blocks of choices at a time. This is similiar to MS Outlook email where you can push the shift key to isolate a block of emails to move to a different folder.
View 2 Replies
View Related
Jul 31, 2006
I have a workbook with 3 listboxes: Listbox1, Listbox2 and Listbox3. Selecting an item in Listbox1 will query a database which populates a hidden worksheet. Listbox2 then populates itself by drawing on entries in the hidden worksheet. Selecting an item in Listbox2 populates Listbox3 in the same way.
At the moment I have the spreadsheet so that nothing is cleared when I close or open the workbook, allowing the listboxes to remember what they were populated with when I closed the workbook. However, the listboxes will not remember what was selected when I closed it. Is this something which I can easily fix with a listbox property? If not, what is the easiest way for each listbox to remember what was selected when I closed it?
View 6 Replies
View Related
Oct 9, 2006
I'm trying to see if it's possible to create a list box where I can select multiple values. For example, if a create a list box with the alues, "ant", "dog", and "cat". Is it possible for me to give the user the option to choose, "ant" and "cat"?
View 2 Replies
View Related
Dec 13, 2006
I have a form with 3 checkboxes. When any of the 3 checkboxes are checked, a set number of items are selected from a listbox. If a checkbox is checked, and then a new checkbox is checked, the listbox selection is cleared and selected with the new values from the new checkbox.
Problem: How can I code this so that if I check a checkbox and then deselect that same checkbox, my selected listbox items are cleared? Only when I select a different checkbox are they then cleared and repopulated.
Private Sub CheckBox1_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Dim lngitem As Long
For lngitem = 0 To ListBox1.ListCount - 1
ListBox1.Selected(lngitem) = False
Next
CheckBox1.Value = False
End Sub..............................
View 2 Replies
View Related
Jun 21, 2007
Here is what I'm trying to create: I've put a command button on my worksheet that pops up a user form with a list box, an "insert" command button, and a "close" command button. I want to allow a user to make multiple selections in the list box, click the "insert" button, and have the selections inserted into the worksheet at a specific cell and fill down. I'd also like for it to allow the user to re-open the user form and add to the list after closing it.
I've hap-hazardly set up the list box for multi-select, but I'd like to see how it's "supposed" to be done! Also, as it stands, my list box selections will populate any cell that happens to be active at the time the initial command button is clicked. I've searched this forum and found that folks have posted similar questions. Those who replied posted a link, which I tried to follow but the page that followed could not find the file.
View 5 Replies
View Related
Jul 23, 2009
I have a MultiSelect Listbox with two columns of data and I want to enter the listbox row data into different cells of a sheet. For example, the selected listbox first column data to be entered to Sheet1, activecell and rows below (for other multiple selections), and the selected listbox second column data to be entered to Sheet1, activecell(0, 2) and rows below (for multiple selections).
View 2 Replies
View Related
Nov 30, 2006
I am writing a macro that allows a user to select which fields they would like to copy from over 100 workbooks. I am using a multiselect ListBox on a userform that I populate using the "additem" approach. There are around 20 fields for the user to choose and each represents a column in the worksheet (all 100 worksheet are in the same format).
I need to use the user selection to identify which columns to pull from all worksheets.
How can I identify the selection the user made and incorrporate that in a copy range type of code. I planned to "Unload" the form after the user hit the "Run" (command) button (not sure if this will matter).
View 9 Replies
View Related
Aug 31, 2006
I've got multiselect option 2 enabled: fmMultiSelectExtended and I want to be able to count up the total number of rows the user has selected.
View 9 Replies
View Related
Mar 17, 2007
I have been using VBA for 2 weeks and have run into a problem I can't find an answer to from searching various sites. I have a listbox with two columns (one name, one numbers). I have two buttons, one that puts the selections onto a sheet and then calculates the associated numbers and then updates a label with the sum of the selections. If they accept the selections, they can then press submit to record the data in the sheet. My problem is that after they press the calculate sum button the selections on the list dissapear, I need them to remain as they may need to change them based on the sum amount. How can I get the listbox to get the sum as necessary (and display within the userform), but not lose the selections in the process.
View 7 Replies
View Related
Jan 7, 2013
Iam trying to auto filter a data range based on criteria passed from a list box selections.I want the auto filter to be filtering column 2 of the data range based on ALL the items SELECTED from a multi-select list box (named listbox2) at the click of a button. Here is what i currently have:
VB:
Sub Cmd1_Click()
Application.ScreenUpdating = False
For i = 0 To ListBox2.ListCount - 1
If Me.ListBox2.Selected(i) Then
Range("A3:C600").AutoFilter Field:=2, Criteria1:=ListBox2.List(i), Operator:=xlFilterValues
[Code]...
It works, only that it filters the data by ONLY the last selected value of the list(i.e only one value item in the list). I want it to loop through ALL the selections, applying filter on column 2 based on EACH of the selections on the list box.
View 9 Replies
View Related
Feb 11, 2014
I am currently setting up a userform where one of the options is for an error code (chosen from a listbox) but the user has to be able to select multiple codes. I have the below working if it is NOT multi select, works a dream and goes in the right column.
VB:
If ListBox2.Text = "A1" Then
LastRow.Offset(1, 20).Value = "x"
ElseIf ListBox2.Text = "A2" Then
LastRow.Offset(1, 21).Value = "x"
But as soon as I set it to mutliselect and choose say A1 and A2 neither one writes, I imagine because Listbox2.text is now A1,A2 and not just one or the other.
View 9 Replies
View Related
Aug 26, 2006
Trying to load an array from user selected items in a listbox
My code returns Type Mismatch error
I don't know why as a I did not declare type for the array I thought treated as variant so should accept any values?
Debug:
arrSelected(intI) = .Selected(intI)
Private Sub btnOK_Click()
Dim arrSelected
Dim intI As Integer
With Me.lstAccounts
For intI = 0 To .ListCount - 1
If .Selected(intI) Then
arrSelected(intI) = .Selected(intI)
End If
Next intI
End With
View 3 Replies
View Related
Apr 1, 2014
I have a multi selection listbox that has 6 columns located on the "Form" worksheet. Trying to extract the data from the selected lines (and all columns for the selected line) and copy to another worksheet (ExtractedData). My code so far only works to extract the multiple selections for the first column. Not sure how to have it include all columns. Ideally would like to have the six columns to be extracted and placed in separate cells on the ExtractedData worksheet. Here is what I have so far:
Sheets("Form").Select
SelCnt = 0
With Worksheets("Form").ListBox3
For i = 0 To .ListCount - 1
If .Selected(i) Then
SelCnt = SelCnt + 1
[Code] .......
View 3 Replies
View Related
Sep 26, 2006
Ive made a worksheet with a userform and ListBox. The listbox is filled with names. If you click on the last button a msgbox with your selected names is displayed. If you select the button without a selection from the listbox a message pop ups to warn that no selection is made. If you select any name afterwards and click on the button the message still pops up unless you select the first entry from the list ("natalie") then the code is right executed. I'm struggeling with the code for several days. I wonder if by any change somebody wants to correct the code. (I've uploaded my sheet)
View 2 Replies
View Related
Sep 28, 2006
I have a multiselect listbox in a worksheet that the user can select from. When the file is saved, closed and reopened, the user selections disappear. Is there a way of reloading the previous selections when the file is reopened? I have used the listbox from the control toolbox and have Excel 2003. My VB experience is very limited!!
View 8 Replies
View Related
Apr 15, 2014
I have a workbook that has 2 worksheets (Sheet1 and Sheet2). Each sheet has 2 checkboxes and a listbox that has 6 columns. Everything works great until I save and close the workbook. When I reopen, all the selections for the listboxes are gone, however the checkboxes are checked as expected. Why aren't the listbox selections being saved? How do I get them to save? I found something similar in a previous post but it referred to a userform which I am not using.
View 6 Replies
View Related
Mar 14, 2009
I have a worksheet (attached) that lists various clients in columan C. Column E lists whether each of the clients listed in Column C are 'Existing Business' or 'New Business'. I require a user form that has three radio buttons (one to select 'New Business', another for 'Existing Business' & one for 'All').
When Selecting a radio button, (e.g. 'Existing Business'), I need all clients listed in Column C of the worksheet that also have 'Existing Business' in Column E to be listed in a ListBox on the UserForm (with the second radio button allowing the text box to list 'New Business' and the third to list both Existing and New).
View 3 Replies
View Related
Apr 22, 2013
I have a listbox with a state and below it several cities. For example:
New York
New York - New York City
New York - Nassau County
New York - Westchester
New Jersey
New Jersey - Newark
New Jersey - Monroe County
New Jersey - Passaic
I would like to select the state and have it auto select all of the related cities including the state. So if I select New York,
It would look like this, where all are highlighted (as if selected). I coudln't find the highlighter on the thread tool bar:
New York
New York - New York City
New York - Nassau County
New York - Westchester
View 9 Replies
View Related
Sep 28, 2011
how to write a formula that will leave a cell blank if nothing is entered. I do not want it to show a 0 unless the cell entered is a 0.
In cell G16 - I am adding U46 and U58 together.
I do not have a problem when it is 1 cell - my formula works fine. When I have 2 cells added together, the formula does not work.
View 7 Replies
View Related
Feb 22, 2014
Using excel 2011 for mac and would like to learn how to write and record a macro to link to a button to "go to a layout and cell"
View 4 Replies
View Related
Jul 7, 2013
I am trying to take two random Mouse click selections and swap a set of ranges associated with the cells that are selected. For example if the user clicks on A1 it will resize(3,22) and store the selection as a variable to be swapped with another selection. Here is what I have so far but I keep getting a object required error on rngEmp1.
VB:
Sub SwapGroup()
If Selection.Cells.Count < 8 Then
MsgBox "Please Select two Groups to swap. Press and hold 'Ctrl' in between your selections", , "Swap Groups"
[Code] .....
View 4 Replies
View Related
Jul 28, 2012
In the toolbar there's a section titled "Number" which allows you to change cell formats with selections named General, Number, Accounting, Date, Time, etc. I want to permanently change some of their default formats.
For instance, currently when I select Number the default is -4000.00. I want to PERMANENTLY change its default to (4,000.00). How do I do this?
View 3 Replies
View Related
Oct 17, 2008
I hope I can explain what I am trying to accomplish properly. Many years ago (5+), I had this exact workbook setup, but am having a lot of difficulty remembering VB & Excel and making this again from scratch.
I am looking to create an Excel Workbook. The workbook will contain numerous tabs, each tab will essentially be a template, and contain basic formulas.
On tab 1(Sheet1), I would like to have a listbox. The individual items in the listbox, should have the same name of, and be linked to all tabs in the workbook.
There will also be three buttons.
Button1 - Generates the names in the listbox based on existing tabs within the workbook
Button2 - Opens a new workbook, and copies over the selected tabs (AKA - creates a working copy of the workbook)
Button3 - Clears the selection and resets the listbox.
The number of tabs, and contents of tabs, within the workbook will be changing. So the listbox should know to look for all tabs, be it 5, or 50.
The end result would allow someone, who knows nothing of Excel, to open this workbook, as a read-only file. Generate a list of available tabs, select the tabs they need, generate a new workbook containing these tabs, that they can then edit to suit their needs.
In my line of work (and I am sure everyones) there is a huge problem with consistancy. This leads to a snowball effect of problems carrying over, and being copied from one project to the next. As I mentioned earler, I once already had this workbook setup, and it solved all our consistancy problems. I am hoping to do the same.
View 8 Replies
View Related
Dec 19, 2012
I work for a UK charity and have a list of funders in an Excel 2007 spreadsheet.
One of the columns refers to the date on which a new application for funding can be made to that particular funder.
In many cases new applications for funding can't be made for 1 or more years since the last application - sometimes as many as 5 years later. How to get a cell to refer to the date that it contains.
For example, say I have in cell A1 "The Acme Funding Organisation" and in cell B1 (i.e. the "Reapply when?" column) a date of 01/04/2013 (British date format, i.e. 1 April 2013) then what I want Excel to do is to look at the date in cell B1 and if that date has been reached to highlight the cell red. That way I'll know that the reapply date has been reached & that a new application can be made.
View 2 Replies
View Related
Jun 15, 2014
Assume I have a cell M24 with a formula like
=M10 + $H24 - $I24*0.35
As you can see B10 is a fix reference (due to omitted $) which should NOT be auto-adjusted but be kept.
Now I want to copy the formular to lots of cells below cell M24. therefore I mark cell M24 and click copy in context menu.
Then I drag/expand the blinking cell border to lets say the 20 cells below. As I result I expect e.g. in cell M25 a formula like
=M10 + $H25 - $I25*0.35
Unfortunately I got
=M11 + $H25 - $I25*0.35
So the fix reference is adjusted as well.
How can I tell Excel 2007 to NOT auto-adjust fix references in formulas?
View 2 Replies
View Related
