I have two lists that I need to compare and remove duplicates but the two list are not identical, ie. one list has four columns and the other one only has two columns.(Using Excel 2007)
View 3 RepliesHow would I remove duplicates using this formula in excel 2007 ?
=CONCATENATE(Q70,",",R70,",",S70,",",T70,",",U70,",",V70,",")
I'm using Excel 2007.
Is there a way to write a formula for the below?
Basically i want Excel to remove the duplicates in column D and show the results in column E (so my formula will start in cell E4)
Excel 2007DE3DATARESULT4BRAND1BRAND15BRAND2BRAND26BRAND1BRAND37BRAND38BRAND39BRAND210BRAND111BRAND3Sheet3
I am using the follwoing code which works as it is supposed to except that it does not remove the duplicate entries, almost as though the code skips that step. How can I fix this?
View 7 Replies View RelatedI need to remove the duplicates under column B for each item under column A and I can't seem to figure out how to do it.
I'm using Excel 2007; I would prefer a VBA solution, as I have to do this on a monthly basis. However, if a formula is the best way to go, then that's just fine. Either way, I'm preparing the data for a pivot table. I am unable to post the actual document in the interest of data protection.
Essentially, I'd like to turn this-
_ A B
1 Paris Bill
2 Paris Bill
3 Paris Mike
4 Paris Derek
5 Paris Derek
6 London Mike
7 London Bill
8 London Mike
9 London Bill
10 London Derek
11 Tokyo Derek
12 Tokyo Derek
13 Tokyo Derek
into this-
_ A B
1 Paris Bill
2 Paris Mike
3 Paris Derek
4 London Mike
5 London Bill
6 London Derek
7 Tokyo Derek
In other words, each city should have only one instance of any name that accompanies it; not all names will accompany each city.
searching between 2 columns (A:B) and finding duplicate emails using some type of formatting that will highlight duplicate emails?
For example?
A B
me@yahoo.comsmelly@yahoo.comegg@msn.comspazz@guno.comdupada@hotmail.comhope@aol.comokay@gmail.comhelp@popp.comhope@aol.comfunky@chicken.com
check@team.com hope@aol.com
I am using MS Excel 2007 and not very experienced, but this is for a marketing golf tournament my company is hosting.
Write a multidimensional array.
I was able to write a OBject dictionary in a loop that removes dupes. During this build I did not take into account that I needed to restart the loop whenever the cell in column L is not the same as the next cell down.
Here is an example of my input Data:
Column L Column P
Row 1 9 10,500
Row 2 9 10,500
[Code]....
I have following sheet:
Data from A1: BU1644
I need to check, if in A1:BU1 are any duplicate words.
All the formulas I found deal with finding duplicates downward (like A1:A1000).
Have not seen any formula which works across (from left to right)
Is there an easy way in Excel 2010 either to tag/ and -or remove the duplicate which I could apply and then just copy downward? The formula must work from left to right, because many words repeat downward.
I have a data in sheet1 as below :
Excel 2012ABCDE1Sr. No.PriceSr. No.Price
21234535123453531234623123462341234712123471251234818123911861
234919135011971235023412350234812371251235125912352261235226101
2353271235327111235428123982812123552912355291312382301235630141
[Code] .........
And now looking for output in sheet2 as below :
Excel 2012ABCD1Sr. No.Price1Price2Total
21234535357031234623234641234712122451234818#N/A1861234919#N/A
1971235023423446881237125#N/A259123522626521012353272754111235428#N/A
[Code] ........
The sr.no. codes and price will keep changing in sheet1, it should automatically update in sheet2. Is it possible with either vba or formula?
I've been left with a macro built in 2010--but I need it to run in 2003.
I've identified a Remove Duplicates function as the cause of a bug, how to translate this to a 2003-friendly macro? This will be an action in a much longer macro. What I am trying to do is check for duplicates in a particular column (Column C), and remove any duplicate row (it doesn't matter which duplicate is removed).
VB:
'Remove duplicates
Sheets("Input sheet").Select
ActiveSheet.Range("$B$4:$H$2005").RemoveDuplicates Columns:=3, Header:= _
xlYes
Can someone look at the sheet sample? I am trying to turn duplicates into a zero like Ive done in record 1 so that the same tax bill is not counted twice. The records are in rows and if I do a transpose and try to do it by hand it will take forever cause I have hundreds of records.
Excel 2007
BQBRBSBTBUBVBWBXBYBZCACBCCCDCE1txt_nme_taxpayertxt_nme_streetcity state txt_addr_1txt_parcel
Year 10Year 9Year 8Year 7Year 6Year 5Year 4Year 3Year 2Year 12QUINCY'S REALTY INC % RASH & A19900
HOLIDAY LNCHARLOTTE, NCPO BOX 16003192170500.55516.22712.71768.860000780.713FERGUSON, BENJAMIN10733
MONTECARLO DRCHARLOTTE, NC3508 SARGEANT DR151840720.4423.5180.381.988.2387.689.1789.1789.1789.174HARVEY,
[Code] ........
I have used this template for a Vlookup and have been having troubles that I simply cannot pin down. Some duplicated numbers in Columns A and C will NOT appear in Column B. I am also trying to work it out where when the results are displayed that Excel will tell me in a pivot how many loans are on both lists and how many loans are on each specific list.
View 7 Replies View RelatedI'm running Microsoft Office 2007.
I have 2 separate tables.. both a list of contacts of sorts.
In one table I have a list of all my clients (table A), in the other I have a list of "preferred" clients (table B).
The contact details etc that are stored in table A are more comprehensive to those in table B.
Effectively, I want to search for all of my preferred contacts from table B and filter for them in table A.
Then ideally I will sort alphabetically and just cut and paste the details into my preferred client spreadsheet.
I had a look online and there was something about creating a "relationship" but I don't think excel 2007 allowed me to do it. I certainly hadn't heard of powerview or powerpivot that they were using!
I use excel 2007 and need a formula to identify cells that have duplicate values within the same cell. For example, some of my city fields have the city twice, like baltimorebaltimore.
View 6 Replies View RelatedI use excel 2007 and got this ques:
I got 2 columns (A and B) with random numbers and i want that in column C
I will get these numbers in ascending order with no duplicates
for instance:
a b
7 2
6 3
2 11
9 1
c
1
2
3
6
7
9
11
Using Excel 2007 and conditional formatting, how would I find duplicates across all fields in the table, similar to the "remove duplicates" tool that in default mode selects all the fields or offers the option to select fields of choice. I need to look at all the fields.
I've tried concatenation, but only with a limited number of fields; larger amounts slow the process to a crawl. If my table is 10,000 records with 15 fields, what process would I use to highlight the duplicates. How about something in VBA?
I am using Excel 2007 on Windows 7. I would like to remove duplicates as follows: If column A = column A, column B = column B, and the two rows are within one hour of each other, then remove all duplicates, leaving one instance of the row. As you can see, sometimes the duplicates are right next to each other, and sometimes have rows between them. (Rows 1 & 2, Rows 30 & 32). Even though this sample doesn't show it, sometimes there can be tens of duplicates within an hour, not just two.
Excel 2007
ABCD1EruptionI Can't Stand The Rain (78)3/7/20129:12:55
AM2EruptionI Can't Stand The Rain (78)3/7/20129:10:02
AM3ChicagoJust You 'N' Me (73)3/7/20129:05:59
[Code] .........
I got two sheets of database and I need to fill the gaps in one of then, taking the information for the other one, I been told that I can do it with vlookup or if function?
View 1 Replies View RelatedWe were looking at a list of about 100 FedEx tracking numbers, each 30 characters in length, in an otherwise blank Excel spreadsheet. All tracking numbers in column A.
I used the Conditional Formatting - Highlight Duplicates feature to find any duplicate tracking numbers. It highlighted numerous. We sorted the column smallest to largest to look at two duplicates back to back, but found that there were actually no duplicates. Excel was highlighting values that had the *first 25* characters the same, but it didn't matter what the remaining characters were. For example:
1234567890123456789012345XXXXX and
1234567890123456789012345YYYYY
were highlighted as duplicates of each other.
Excel only looks at the first 25 characters when analyzing duplicates (at least in this specific function). That in and of itself blows my mind. Tracking numbers seem like an abundantly common type of data, and to think that Excel would fail to analyze them in such a simple manner seems impossible to me.
It gets slightly more confusing though. If you back a character off the end of the values, it NO LONGER sees them as duplicates. So...
1234567890123456789012345XXXX and
1234567890123456789012345YYYYY
are NOT highlighted as duplicates while
1234567890123456789012345XXXXX and
1234567890123456789012345YYYYY
ARE highlighted as duplicates. So there's some funny business going on about values of the same character length. Maybe Excel first looks at character length before analyzing specific characters. If length doesn't match, it doesn't even bother to analyze specific character values. That seems like a very strange programming choice though.
I have a excel 2007 workbook that has 5 sheets "MASTER" , "RED" , "WHITE", "GOLD" & "BLUE". There are 7 columns in each sheet and the master has about 8,000 rows . In column D of each sheet there is a unique number (approx. 8 - 10 digits ) that I would like to at the press of a command button search through sheets "RED" "WHITE" "GOLD" & "BLUE" against the unique numbers in the "MASTER" sheet and if there any duplicates numbers delete the entire row but leave all the data in the master sheet.
View 2 Replies View RelatedI have many spreadsheets in Excel 2007 that are password protected to open. How can I remove this function???
View 5 Replies View RelatedI have a pivot in excel 2007 but I have the following problem; I want to exclude values from one variable that have a value lower than zero or blanks:
Month #AVG Employees
Jan 200
Feb 171
But the problem is, if i filter on the variable by placing it in the Report filter (select multiple items to remove blanks and -999), when i refresh the pivot next time for the new month it won't add the new values for the next month. How to have the filter so it applies the criteria but allowing new values in for the next month.
I know that there is a way to remove or add subtotal for different fields, how to add subtotal only for the fields that have more than 1 value? I don't want to to subtotal for anything that has only 1 value.
View 2 Replies View RelatedI have a lot of record that contain number like shown below:
0000082181
0000005465
0000028997
I want to remove all 0 in front of this number in excel.. I use excel 2007..
I already try using formula
Code:
=IF( LEFT(A1) = "0" , RIGHT(A1, LEN(A1)-5), A1)
but it only remove 5 character in front what about the number that have 6 '0'......
What I'm tying to achive is to compare data on two worksheets called "Old" and "New" and to populate the difference on another worksheet called "Diff" see attached file where I have manually added the differences onto the "Diff" tab.
Is it possible via VBA or Vlookups to achive this
N.B. Excel version 2007
it's possible to set up conditional formatting to compare values between two identically-formatted (i.e. same row and column) pivot tables?
I have two pivots from two different sources and I want to be able to visually identify discrepancies between the two. Both have dates as the row labels (same date range) and categories as column labels (some categories may not necessarily be present on both pivots but the format of the labels - i.e., the names of the categories - is consistent where there is overlap)
I've tried doing this with 'traditional' CF but whenever I manipulate the pivots (i.e. by selecting / deselecting an item in a report filter), the movement of the columns trashes the formatting and I have to set it all up again.
Figured, given the structure of the tables is essentially the same, there might be a smarter way of doing it (by referencing the pivot fields in some way)
When I open a spreadsheet I get the following message
Excel found unreadable content in Book_Name. Do you want to recover the contents of this workbook.
All the information I find says:
This issue occurs if the following conditions are true:
The workbook contains a PivotTable that uses key performance indicators (KPIs).
The KPIs are created in the Analysis Services Business Intelligence Development Studio.
One or more of the KPIs have an expression in the Current Time Member property.
and the fix is : To resolve this issue, remove the expressions from all Current Time Member properties.
My issue is - the spreadsheet with Pivot tables is supplied to me. I am using Excel 2007 - how to remove the expressions?
When I do this on another machine same version of excel I have no issue.
I need a formula to use on MS Excel 2007 to remove the English letters from a cell A1 and return only the numbers(if any) & Chinese characters to B1.
Please refer to the able below.
Example:
A
B
1
so l首先欢迎大家收听我们的科学与烹饪系列
首先欢迎大家收听我们的科学与烹饪系列
2
讲座的最后一次报告 有点难过这是最后一次了
讲座的最后一次报告 有点难过这是最后一次了
[Code]...
I am comparing sheets of informaton and looking for email address duplication. Comparing sheet 1 to sheet 2 using MATCH and Using "NEW" or "DUPLICATED" as the results.What I would like to use is sheet 3 and extract the "DUPLICATED" data together with all the information in the same line of the duplicate data. In effect changing "DUPLICATED" to a line of information including the duplicate data.
View 7 Replies View RelatedI have an excel document that looks like this: Capture.JPG
I need it to look like this: Capture2.JPG
As you can see, the batch #, document #, amount, debit and credit all duplicate based on the number of debits that appear for each document #.