I am comparing sheets of informaton and looking for email address duplication. Comparing sheet 1 to sheet 2 using MATCH and Using "NEW" or "DUPLICATED" as the results.What I would like to use is sheet 3 and extract the "DUPLICATED" data together with all the information in the same line of the duplicate data. In effect changing "DUPLICATED" to a line of information including the duplicate data.
View 7 RepliesI have a sheet which contains more than 8000 names (in 1 column), & another sheet which contains around 600 names (in 1 column), is there any way wherein i can compare both the columns & find out duplicates if any?
Sheet which contains 8000 names contains duplicate cells as well, but dat doesn't matter, i jst need to compare & confirm the sheet which has 600 names should be unique (Not included in 8000 data)
I have two columns of data. Each row cell is 27 characters long. I want to
find any duplicate matches between the two columns on just the 1st 9
characters of each cell. Is there a function that can do this?
I receive a daily spreadsheet which contains (amongst other information) a column of postcodes. I'd like to run a macro which compares these postcodes with a list of other postcodes, and then to colour highlight each instance of that post code in the daily spreadhseet.
I have been able to find and modify a macro but that searches for one post code at a time and then adds a comments box to the cell.
Instead of copying that piece of code and editing it for the several hundred post codes I need to "look up" against, I'd like to know how to create a list of post codes in the macro, so that the macro searches the first post code in the lookup list, finds and highlights each cell instance, then moves onto the next post code in the lookup list, until the end of the lookup list. I would like this as the editing of the lookup list would be much easier than editing paragraphs of code.
I have column A that is 1,500 records.
I have column B with 40,000 records.
Among the 40,000 records in column B, duplicates of ALL 1,500 records from column A exist.
My question is: How do I find WHERE the 1,500 dupes are and how can I delete JUST those records?
I have two lists that I need to compare and remove duplicates but the two list are not identical, ie. one list has four columns and the other one only has two columns.(Using Excel 2007)
View 3 Replies View RelatedSo here I have two columns Column 1 with repetitive values of some 10000 records Column 2 with unique values of 100 records I want to compare Column 1 and Column 2, identify the values in Column 1 that match with Column 2 and highlight them. Conditional formatting for duplicate values doesnt work because Column 1 has repetitive values.
View 6 Replies View RelatedColumns A, B, and C have data (first name, last name, state) - 125k rows. Columns F, G, and H have data (first name, last name, state) - 5k rows. Some of these individuals are bound to appear on both lists, and I need to know which ones are indeed on both lists. So in other words, let's say I've got "John" "Doe" "TX" in cells F1, G1, and H1, respectively. I want to search through columns A, B, and C to find out if there are any instances in those columns of "John" "Doe" "TX" in the same row.
I'm thinking there will be multiple VLOOKUP formulas involved, but I could be way off.
The Master list:
Sheet1, Column C has unique numbers, i.e, 0608-211-1093-2.
(can have thousands of entries)
The Comparison list:
Sheet2, Column C will have duplicates of some of Sheet1, Column C numbers.
(Sheet2, Column C will have the numbers but other columns will have different
data than Sheet1 and may have a few hundred entries or less)
I need a macro that will that will compare the two sheets for duplicates based on
Column C and then write the entire row of Sheet1 with the duplicate number to a new Sheet3.
Need to find a column of numbers from one worksheet and delete them from another.
Example
To be deleted is below:
83221
83223
83232
83233
83236
to be deleted from is below:
83221
83223
83226
83227
83228
83229
83230
83232
83233
83234
83235
83236
Another issues is that the worksheet that needs to have the numbers deleted from has 3 columns total so the whole row would need deleting, or if its easier I could replace the numbers with 0 and then sort and delete.
searching between 2 columns (A:B) and finding duplicate emails using some type of formatting that will highlight duplicate emails?
For example?
A B
me@yahoo.comsmelly@yahoo.comegg@msn.comspazz@guno.comdupada@hotmail.comhope@aol.comokay@gmail.comhelp@popp.comhope@aol.comfunky@chicken.com
check@team.com hope@aol.com
I am using MS Excel 2007 and not very experienced, but this is for a marketing golf tournament my company is hosting.
I need a macro to compare the values in column b across 2 sheets and output the rows that do not have duplicate values in column b to a third sheet?
View 3 Replies View RelatedI want to compare cell a to range c and extract comparing cell b to cell D. I might have explained it back words but see attached.
View 2 Replies View RelatedIs it possible to compare two sheets and extract out the differences?
View 2 Replies View RelatedI have 2 worksheets in 2 spreadsheets 1 & 2. I would like to compare columns A & G in 2 to 1. If columns A & G in worksheet 2 matched worksheet 1, then it will fill in columns B, C, D, and AL automatically.
View 1 Replies View RelatedI have a Workbook containing four different Worksheets, each of which contains a different number of columns:
"Set A" = 18 Columns
"Set B" = 47 Columns
"Set C" = 47 Columns
"Set D" = 11 Columns
Each Worksheet contains a different number of rows, approx 4,000.
Column A for each of the above Worksheets is, however, the same and contains an alphanumeric string called "Accession ID".
I have been tasked with extracting the entire row of data for each "Accession ID" which appears on at least 2 Worksheets, and then compile them in a new "Summary" Worksheet.
So, for example, if one of the Accession IDs was "ABC123" and it appeared on all four of the Worksheets; the Summary Worksheet would contain the 18 Columns from the row on which "ABC123" appeared in "Set A", the 47 Columns from the row on which "ABC123" appeared in "Set B", the 47 Columns from "Set C" and the 11 from "Set D" all on different rows.
I tried toying with VLOOKUPs etc, but given there are four Worksheets, and in order to qualify the Accession ID must only appear on a minimum of two Worksheets - it quickly become a mess.
Is there any way of being able to do this as a macro perhaps?
I have 2 workbooks containg about 600 names and the serial number of the computer they are using. One I keep so I know who has what machine. The other is created automatically by a service we subscribe to.
This workbook is loaded with errors. Machine costs being charged to the wrong people.
They both contain last name, first name and serial number. Although not in the same columns. With formulas, I have been able to take the serial number from the service.xls and find that serial number in the inventory.xls.
The ultimate goal is this:
Take serial number from service.xls and compare it to inventoryxls.
If it exist, put the first and last name of the user from inventory.xls onto the service.xls sheet.
If it does not exist, then put "does not exist"
i want to compare two excel sheets and extract common data in either sheet. For eg: If sheet 1 and sheet 2 contains some common data, i need to compare or lookup or whatever i do but i need to pull out that common data in sheet 2.
View 3 Replies View RelatedI have a spreadsheet with 2 tabs:
AllData:
Name
Data
Read1
[Code]....
Here's how my daily report is currently set up:
ExternalInternalDifferences
123000123000
234564234564
345456345456
456567378987
565456456567
654547524564
788879565456
865478654547
745654
788879
865478
The External column contains data provided by an external vendor. The Internal column contains data compiled internally. The data in the Internal column will always contain data duplicate to the External column, but will also contain unique data not present in the External column. I would normally cut out the data contained in Internal column that is not duplicated in the External column, and paste it into the Differences column, and move the remaining cells in the Internal column up. The result would be the External column data and Internal column data would align by row, and the data unique to the Internal column is segregated to the Differences column, like so:
ExternalInternalDifferences
123000123000378987
234564234564524564
345456345456745654
456567456567
565456565456
654547654547
788879788879
865478865478
While not a difficult task for 8 rows of data, the actual daily report contains over 1000 rows, on average. I would like to set up a template workbook, where I can simply open the template workbook, paste the data into both the External and Internal columns, then have the values that are unique to the Internal column extracted from the Internal column and inserted into the Differences column.
The end product would be used daily, with differing amounts of data (from 100 rows to 10,000 rows).
what I'm after is a macro to check the contents of Column 'A' against column 'B' and display any duplicates in Columns 'C' & 'D'.
N.B. The headings of Columns C & D are :-
C = Value Found in Column A
D = Value Found in Column B
Any duplicate entries logged in columns C & D should be listed in C2,C3,C4....C20 and D2,D3,D4......D20 etc (in effect creating two new lists)
Trying to compare a list of names in 2 columns. Column A has a short list of names I'm looking for in the long list of Column B.
How can you create the macro that does...
If any value in Column A matches any value in Column B
Then format (bold, highlight, etc...)
I have a problems here. The problems is attached in the file. I wanna extract alpha/char from a string. Example: I wanna extract the words "(M)" with the bracket from the string "Toothbrush (M)" in column A. After extracting the (M) out, I wanna do a validation to compare the (M) in column B with another data in column C, if the (M) is same as the data called "Medium" in column c, the validation will return "Match" in the column d!
View 9 Replies View RelatedIn short, I would like a pivot table to only count unique values, but when I click into the pivot I would like to show all instances of that value. For example:
I have a table of data that I am creating a pivot table from. There are fields for Customer ID, Task Name, Age, and Notes. There will be multiple records for a single Customer ID each time it has new notes.
I would like to create a pivot table that has Task Name in the Row Labels, Age in the Column Labels, and count of Customer ID in the Values, so that, for example, I can see how many accounts have been in the Design task for 2 days. However, when I do this it counts each record, but I would like it to count each unique Customer ID. Also, when I click into the pivot, instead of pulling up one line per Customer ID, I would like it to pull up each instance of Customer IDs in that Task Name/Age combination (similar to doing a DISTINCT in SQL).
I have a list of isometric drawing numbers ending with a [underscore]weld number e.g. 1692-SG-0040-04_05.
Some welds are repaired--in that scenario the amended weld number will be 1692-SG-0040-04_05R1, and even 1692-SG-0040-04_05R2 if repaired for a second time.
On occasion a weld may be cut out entirely and a new weld done. The weld number for that will be 6317-FG-1690-02_06C1.
And here's a wrinkle I've just verified...a cut weld may also be repaired so the weld number will look like 1698-SG-0077-01_04C1R1.
Is there a formula to count these as one weld:
1692-SG-0040-04_05
1692-SG-0040-04_05R1
1692-SG-0040-04_05R2
This as one weld:
6317-FG-1690-02_06
6317-FG-1690-02_06C1
6317-FG-1690-02_06C2
...and this as one weld:
1698-SG-0077-01_04
1698-SG-0077-01_04C1
1698-SG-0077-01_04C1R1
I am having trouble creating a function to count duplicates of duplicates.
An example of the data table 1 is:
Product 1 2nd
Product 1 2nd
Product 1 New
Product 1 New
Product 1 Flt
Product 2 2nd
Product 2 New
Product 2 New
Product 2 Flt
Product 2 Flt
Product 3 2nd
Product 3 2nd
Product 3 2nd
Product 3 New
Product 3 Flt
I created a new table (table 2) and made a list of all the Products on table 1 and removed the duplicates. I now have 3 columns with titles New, 2nd and Flt as follows:
New 2nd Flt
Product 1 XX XX XX
Product 2 XX XX XX
Product 3 XX XX XX
I am trying to count the duplicates for each product (XX), but I can't seem to work it out. I've tried the MS help function, but unsure of the actual formula I need to be using.
I am using Windows 7 and MS Office 2010.
Basically I have two sets of data. One will be new each week. I'd like to use the non-changing data as a base to compare new data to. The formula would need to match multiple values, including a 'time between', and then return whether a minimum rate has been met.
SampleRateExamine.xlsx‎
I have two ranges of numbers stored as text on two different sheets.
The first one is from product code and the second is from product category.
The problem is both ranges are of different lengths and I have to find out if a product from the right is part of a particular product category. Even if the length is different the first digits are indicative of the belonging of a code. For example 1234 and 12345 are “family”-their first 4 digits match.
Just to give you an example of what is desired:
Category____ Code
2200 ________22002
2323________ 232347
So, the loop should do the following:Compare the first string from the “Category” column to each and every entry on the right, if a match exists (we have no match here for 2200) write “ok” next to it.
Next trim one digit from the right from every string in the “Code” column.
Compare same first string from the “Category” column to each trimmed string from “Code” column (here we should have a match 2200=2200)
Write “ok” next to it
Now the loop goes to the second string from “Category” column and for this one we will have to trim 2 digits from the right of each string in “Code” column to achieve the result (2323=2323) and so on.
I'm trying to Count duplicate text on sheet 2 and populate the number of times repeated on sheet 1.
On sheet 1 I have A3:A128 and would like the number of times these respective cost centers are repeated in Sheet 2 to populate Column B of Sheet 1.
File attached.
Not sure which formula to use. I tried CountIF but didn't work with 2 sheets.
I need to compare the date from the user input and the date listed on excel. How can I compare it? Is it correct? lngCmp = Val( Cells(I, 31))
Dim lngBegin As Long, lngEnd As Long, lngCmp As Date, lngResults As Long
lngBegin = 9 'beggining of data
lngEnd = 232 'end of data
lngCmp = InputBox("Please enter the date", "Begining of the week")
Lngcmp1 = DateAdd("d", 1, lngCmp)
lngCmp2 = DateAdd("d", 2, lngCmp)
lngCmp3 = DateAdd("d", 3, lngCmp)
lngCmp4 = DateAdd("d", 4, lngCmp)
lngCmp5 = DateAdd("d", 5, lngCmp)
'lngCmp1 = lngCmp + 1
'lngCmp2 = lngCmp + 2
'lngCmp3 = lngCmp + 3
'lngCmp4 = lngCmp + 4
'lngCmp5 = lngCmp + 5
lngResults = 0
lngResults1 = 0
lngResults2 = 0..................................