What I'm tying to achive is to compare data on two worksheets called "Old" and "New" and to populate the difference on another worksheet called "Diff" see attached file where I have manually added the differences onto the "Diff" tab.
Is it possible via VBA or Vlookups to achive this
N.B. Excel version 2007
This is a physical inventory process. An employee, using a barcode reader, will populate the cells of one column in a worksheet with asset IDs that are located at a facility. Once done, the employee must compare the cell values of the worksheet that he or she has populated to the cell values of the inventory roster. The desired outcome is to produce a plus/delta report based on the comparison of the two worksheets.
View 2 Replies View RelatedI have been trying to get Excel (2007) to change the colour of tabs to match other tabs in the workbook
Using this code I get the colour code of the current tab
Code:
x = ActiveSheet.Tab.ColorIndex
But when I use this value in a procedure like this:
Code:
ActiveSheet.Tab.ColorIndex = x
The tab is a different colour!
I created a data validation formula for an Excel 2010 workbook that would only display client names who were assigned to the manager that they selected. The formula works fine in Excel 2010. However, when I open the same workbook in Excel 2007, the data validation type is reset to "Any value" and the formula is missing.
OFFSET is an available command in both 2007 and 2010. When I try to add the formula as a data validation list in 2007, an error indicates that Offset cannot access data in a different table. I have not been able to find any documentation which restricts the OFFSET command in Excel 2007 but there seems to be some incompatibility between the two Excel versions.
The formula I used was:
=OFFSET(Clients!$A$1,MATCH(Summary!$A$1,Clients!$A:$A,0)-1,1,COUNTIF(Clients!$A:$A,Summary!$A$1),1)
Where:
"Clients" is a sheet which lists all clients under each manager."Summary" is a separate sheet which contains the manager's name. Only clients matching this name will be available in the employee's client list.There are 50 "employee" sheets, each which should use this formula for data validation in the client column.
The error we received seemed to indicate that the above command could not access data on another worksheet. It is not an option for me to copy the client list onto each sheet that uses this formula. Are there any other options?
I'm trying to use VBA to populate excel range data to MS Word bookmark.
I am using Excel 2007 have following field
Column A Column B
Cash xxxxx
Liabilities xxxxx
RE xxxx
What I wanted to do it to populate data at Column B of Excel to MS Word Template below
Cash xxxxxx
Liabilities xxxxxx
RE xxxxx
I've tried using below code sample code but it does not work.
Sub testing()
On Error GoTo errorHandler
Dim wd As Word.Application
[Code]....
I'm trying to get some vba to automatically find the range of data in a spreadsheet (So start from a specified point and loop until it's blank) and populate a combobox with this range accordingly. I have read numerous articles and posts but nothing seems to work!!
I am using Excel 2007.
Using excel 2007 and I noticed some differences between how a caluation is done via PEMDAS (as I understand it) and evaluating vai excel.
The formula is just an example and doesnt relate to anything as such.
The formula is: 2*6+3-4/2-5+20/5*3+50
using [URL] the formula show the calculation as I would have calculated.
Manual Order.png
When using excel it does it in a different order
Excel Order.png
Any reason why?
I have just started using Excel 2007 after many years with 2003 and I must say that the new one is totally amazing except for one thing and Im sure there is an easy answer to this although the HELP was NO HELP
One the sheet I am working on I hide the sheet tabs through 2003 and now I see there is no options to unhide them. How do I do this.
I am using excel 2007. My workbook contains a tab with several buttons with hyperlinks to corresponding other tabs in the workbook. The hyperlink works fine when the tabs are visible, but do not work when I hide the tabs.
Is there a way use hyperlinks on tabs that are hidden?
I've just started using Excel 2007, and despite manually activating the add-ins I use, the add-ins tab is not showing on the toolbar. Also, I can't find the format tab either.
View 6 Replies View RelatedI have excel 2007, I have a spread sheet with approx 80 worksheets. The document grew over the year of 2010 and is not in alphabetical order. I am starting this new year wanting to have the tabs in alphabetical order. I looked in the DATA sort option...but looks like its is worksheet specific. How to make the tabs sort in alphabetical order...
View 5 Replies View RelatedI am using Excel 2007. When I pulled up a workbook today with 3 sheets in it, all that comes up is the first sheet and the sheet tabs at the bottom of the screen are no longer there. I must have accidentlly pushed some button, but I can't get to the other sheets. I really need the information on the other sheets. How do I restore the view that shows the sheet numbers at the bottom?
View 2 Replies View RelatedI have to worksheets I get from two different dbases do the output is slightly different in each. What I need is simple, (I think). Just need to get a VBA that looks from Sheet1 to Sheet2 for a doc number. If it's not on Sheet 2, simply highlight it BLUE on Sheet, AND then looks from Sheet2 to Sheet1, and if it's not on Sheet1, then highlight the entry on Sheet2 GREEN.
I.E.
SHEET1SHEET2
COL ACOL A
11111AAAAA
22222BBBBB
3333311111
AAAAA44444
I have attached two excel files for easier understanding of what I am trying to explain. One is named Deviltronics which is our product list, the other is named Supplier which is our suppliers product list. The suppliers product list is updated every hour to tell me of new products, products in stock, products out of stock and discontinued products. I have cut the suppliers file down considerably to get it to fit as an attachment on this thread. They currently have about 800 products. Now for how this is currently working and the problem:
I use the suppliers file to add the products to my website manually (which is fine) by using the information on the suppliers file. I also add the product title, SKU and part number from the suppliers file onto our Deviltronics file, this allows me to keep a record. The reason I need this record is so that I can use either the SKU or part number to search the suppliers file to see if a particular product is still in stock or not. You can distinguish the supplier has a lengthy product list, although we will not be putting all of there stock on our website at least 70% of it will be on there, therefore you can see how much of a lengthy process this is if I want to check the products on a daily basis......
In attached spreadsheet, I have run my marco on Col A to tag which records are duplicates (macro in workbook). Now, of the records that are tagged "DUP", I would like to find which cells in Cols B, C, D, etc. have changed - ie., compare the first "DUP" record to the second "DUP" record. Some records and 2 DUPs, others have 3, 4, etc. I only want to compare the tagged "DUP" groups. Changing the cell color (or other type of tagging) the difference is acceptable.
View 5 Replies View RelatedI got two sheets of database and I need to fill the gaps in one of then, taking the information for the other one, I been told that I can do it with vlookup or if function?
View 1 Replies View RelatedI am a relatively light Excel user. I mainly use it when working with the .dbf files that make-up GIS shapefiles.
My problem at hand: How can I compare/isolate the rows from spreadsheet #1 to #2 to determine which rows are unique to spreadsheet #1?
What I'm doing: I have a spreadsheet of addresses which I joined to our parcels shapefile to select those parcels. I am trying to determine the success rate of my join operation by isolating the rows which weren't joined. This would be determined by highlighting which rows from spreadsheet #1 aren't in #2.
I have two worksheets. Sheet1 is a Master List and Sheet2 is subset of Master List. Now I have to separate those records which are there in Master List, but not there is Sheet2 and list them in Sheet3.
Example:
Sheet1 contains records: a, b, c, d, e, f in rows
Sheet2 contains records: a, d, e in rows
Sheet3 must show: b, c, f in rows
I need to compare two worksheets, and show the final results in the Results Sheet.
These two sheets are actually .CSV files and is why some of the cells show as dates.
The SKU column is a combination of Material and Length. we need to find the difference for the Qty of SKU items.
If you look at the results page you will see what the results should be. Colored cells are just to show the differences in the example.
Is it possible to compare two sheets and extract out the differences?
View 2 Replies View RelatedI have two employee rosters, "yesterday" and "today", with same columns heading(First, Last, Location, Status, etc, etc, etc . I want to compare both rosters and highlight the differences on "today's" roster if an employee's information (location, status, etc) changes from yesterday.
Another change could be, an employee may not be on today's roster as he was yesterday and I could have a new employee on today's that wasn't on yesterday's. Is there a way to copy the row/record from yesterdays roster and add him to today's but highlight it so I know that he is gone?
Compare Two Sheets and Highlight Differences (Sheet attached)
I saw a great code which compared the values in two columns A and B, data such as A123 and then shows, in another column ie C , things in A and not in B and in another column ie D things in B and not in A.
View 9 Replies View RelatedI am trying to compare two worksheets and report the differences (data added or changed in the second, not necessarily data removed in the second). Afterwords I want to color code the third spreadsheet for if the whole row was added that it would make that whole row a different color and if one column in the row was changed that one column would change colors. Currently I am stumped on this, I tried searching the forums and found something that I made it to do the first part.
Sub test()
Dim a, b(), i As Long, ii As Long, n As Long, nn As Long, fa As Long
Dim z As String, zz As String
a = Sheets("sheet1").Range("a1").CurrentRegion.Resize(, 8).Value
With CreateObject("Scripting.Dictionary")
.CompareMode = vbTextCompare
For i = 2 To UBound(a, 1)
z = "": zz = ""
For ii = 1 To UBound(a, 2)
z = z & ";" & a(i, ii)
Next
zz = a(i, 5) & ";" & a(i, 6)
.Item(z) = i: .Item(zz) = i
Next .............................
how can I get the red highlighting to work like so?
Test Test_002 6698F ES6698F DVP3142 DVP3144 GTM8800 GTI8000 SDV394 SV384STC
I have included a small example file. What I would like to do is compare column A - Code on -CORP REC - on first sheet, with column A -code -SUPR REC on the second sheet. Then compare the differences and insert them into the third worksheet - discrepancy -Column A- Code and Column B Name.
Also is it possible to convert all the uppercase names on sheet one to lowercase as I would like the discrepancy sheet to names to be in lower case.
If other threads list exactly this I apologize. I am not really good at using others for adaption. but I can try if you want to direct me
I am currently trying to work out what the best way would be to search between two sheets and find out where the differences are. IO have sheet 1 and 2 which both have account numbers and details on. I searching off the first column on both sheets and trying to identify which records exist on sheet 1 but not on sheet 2. The code I have so far is
Sub check()
data_sheet = "Sheet1"
target_sheet = "sheet2"
rowcn = 2
Do
If Sheets(data_sheet). Cells(rowcn, 1) <> Sheets(target_sheet).Cells(rowcn, 1) Then
Rows(rowcn).Select
Selection.Font.ColorIndex = 3
End If
rowcn = rowcn + 1
Loop While Sheets(data_sheet).Cells(rowcn, 1) > 0
End Sub
This currently works 50%. Only problem is that this code is not independant to each list, it simply looks at the same cell reference on both sheets and check whether the value is there. It doesnt actually go down the whole list and checks whether it is there.
I have two spreadsheets that I have to compare three columns in each to each other and find the difference between them. And I'm not sure how to do this.
I have attached a sample file to show what I'm looking at.
Basicly I need to know the differences between each spreadsheet based on zips. Each zip is assigned to a store and group and the "data" spreadsheet is the master. I need to compare the "system" spreadsheet and have it show me what is different based on each zip.
I need a macro that will compare two sheets, find the differences and produce a new third sheet called, results. Both sheets to compare will differ in length of values (one may have 10 numbers to compare, and the other could have 50, Ive attached sample data), and thus this calls for a primary and secondary sheet. I would only like the values which appear in the primary and not the secondary sheet to be reported in the new results sheet.
The problem is that the values never match up, but they are always within a +/- 0.5 window of each other. It would be great to compare the two sheets, to produce a list of the values which appear only in the primary sheet and not the secondary. Im trying to get this to link up to a userform, where the user select the primary sheet (A) and the secondary sheet (B), selects the tolerance, and produce the results sheet (see attached).
So I have two worksheets: W1 and W2.
1. W1 has data in Column A, while W2 has none in that column (except for the header row of course).
2. W1 has rows that W2 does not have, and vice-versa.
I need code that will compare three columns in these two sheets. If the data in these three columns for a particular row match between the two worksheets, then for that row, I need the macro to copy the column A cell in W1 to the corresponding column A cell in W2. Finally, I would like an 'x' be placed into a W1 column if a match was found for that row.
The two sheets do not have the same number of rows, but the data being compared in the three columns should combine to form a unique row match between the two worksheets.
I need to compare dates from two workbooks. The dates are not entered in the same format. In order to compare them I store them in Date variables.
However, some dates entered do not have a standard date format (for example, day is missing) and I get an error when I try to store them in a Date variable.
The solution I thought out (most likely a bad one) was to temporarily re-dim the variable from Date to String when an error occured. The macro would then be able to store the incomplete date and do the comparison.
So, basically, the variable would be dim'ed once as a Date, then possibly dim'ed a second time as a String, and if this occurs, then it would be dim'ed back to a Date once the erroneous date would have been treated as a String.
My problem is that it doesn't appear to work if I use the dim statement because of "duplicate declaration in current scope". Is there a way to re-dim a variable as something else within the same macro?