I am trying to use Datevalue in Excel 2007
When I put in =datevalue("08/22/2008") I get the error #Value!
If I put in datevalue("2008/08/22") 39682 which is what I was expecting. If I use =datevalue("08/08/22") I also get the right answer, anything else I get #VALUE!
I didn't think that Datevalue mattered with how the date was in?
Do I have a setting wrong of something that could be causing the error?
I have a row with dates in row 4 Every fourth of the month a payment must go out, so I would like to see this date date in row 5.
I made an example with a manual solution, as you can see there are dates noted in cell E5 and in cell AJ5 I would like to automate it.
I am trying to check my sheet names to see if they convert to a valid date format. If it doesn't, then I want it to check for the next criteria (ex - if it equals "Page2"). With the code below I keep getting an error of type mismatch. Code is below.
[Code] ......
I have a text string from a regulatory site for a date and time
01/11/2013 1607
I'm trying to convert this into a date and time stamp but having problems with datevalue
11-Jan-13 16:07:0
I need to write a code to create visio flow diagram with excel inputs(Excel 2007). Attached is the requirement.
Requirement_Specification.docx
I have big Access file .mdb. I need to work with the file in Excel.
The Excel read the file and I tryed to save the file as .xlsx
I receive a message saying only 64k rows will be saved.
How can I translate the file to Excel 2007?
I use Excel 2007 which is creating a whole load of tmp files of the spreadsheet that I work on.
Is there a way tostop Excel from creating and saving the tmp files?
I am failing on the logic and syntax to achieve the following. Basically it has to take the sum of 1, or 2 fields and validate it against the value of a 3rd field. I can get it to work for 1 field if DefPercent = 100 but not when looking at the total of 2 fields if DefPercent < 100.
Fields:
- DefPercent (if = 100 LiabilityAmt2.Enable = False) (this works fine already)
- TotalLiability
- LiabilityAmt1
- LiabilityAmt2
Output Required: logic only
If DefPercent = 100 And TotalLiability LiabilityAmt1 Then
MsgBox "error....."
Exit Sub
Else continue
If DefPercent < 100 And TotalLiability LiabilityAmt1 + LiabilityAmt2 Then
MsgBox "error...."
Exit Sub
Else continue
I am facing issue in Data Validation,
Currently i am using Excel 2007, in that i need to add a validation of Yes and No.
After entering the Validation in the drop down if any one copy any data and paste in the cell(Validtion) the validation vanishes.
I am working with excel 2007 in windows 7. I am working with small animals that have been outfitted with a RFID (radio-frequency ID) tags with unique UID codes. In a sheet called Tag_info I have a list of the unique UID's of the tags that are in use along with a number of parameters (the colony in which the animal with this tag is situated, if it was treated with something, its age etc). I left out most of the parameters because they aren't relevant to my question, but it looks like this with each UID only once in the list:
A
B
C
1
UID
Colony
Treatment
[Code] ........
In a 2nd sheet, a ton of data is saved by the scanners that read the tags as the animals pass by scanners in a number of locations. The relevant data for my problem is basicly the timestamp (UTCTime_Rounded). Since animals pass by the same scanners multiple times, and scanners may read the same 'passing' as multiple signals the column with UID's here contains tons of duplicates (unlike in the Tag_info sheet where every UID is only displayed once). Once again, I left out the irrelevant data for simplification so that the data looks like this:
A
B
C
D
1
UID
Address
UTCTime_Rounded
Age at read
[Code] ........
So finally, what am I looking for? I want a formula to look up the UID's from the Tag_info sheet to find and return the first and the last timestamp (UTCTime_Rounded) for that UID in the RFID_Scan_values sheet.
So that formula basicly has to return the min and max values for UTCTime_Rounded, for each of the UID's in Tag_info. The output would look like this (I did it manually for this dummy dataset since I didn't get any formula to work yet):
A
B
C
D
1
UID
Colony
Treatment
First scanned
[Code] ........
Tag info And then a similar column for the Last scanned, max values.
I have just started using Excel 2007 after many years with 2003 and I must say that the new one is totally amazing except for one thing and Im sure there is an easy answer to this although the HELP was NO HELP
One the sheet I am working on I hide the sheet tabs through 2003 and now I see there is no options to unhide them. How do I do this.
I have an excel file saved as macro-enabled that is perfectly functional and can be opened on my computer (via Security Warning - Enable Macros). The file is saved on another computer, through which I am accessing by a network.
This other computer is unable to run the macros, and when we open the file in excel there is no security warning that pops up (like there is on my computer). I have gone to the Excel Options and entered the trust center settings, and finally the Macro Settings. It is set at Disable all macros with notification. (same for both computers... but on one of the computers there is no security warning that pops up)
We tried enabling all macros (temporarily) and tried re-opening the file and running a macro. We got an error message saying that macros were not enabled.
We also made the file a trusted location and saw no changes.
I am using MS Excel 2007.
I have column "A" a list of my PDF filenames and File path in Column "B". I want to establish hyperlinks for each of these PDF filenames (column A) and link it with the file path that I generated in Column B.
=HYPERLINK(B1,A1) did it very well, but unfortunately when converting to PDF, the hyperlink is not working, and I believe the conversion retained is only in text, so now my only resort is hardcoding it by VBA.
I am currently struggling with a spreadsheet that has been created in Excel 2007. Essentially, it has a number of items (individually identified by "S code" in the first column) that need to be tested at the specific dates over a one year period (i.e. at "2 weeks", "4 weeks", "8 weeks", etc) as shown in the screenshot below.
A user manually enters "Complete" into the corresponding cell in the "In-testing status" section of the spreadsheet when testing has been completed for a certain item at a particular time point.
Screenshot.jpg
I already have set up conditional formatting that highlights cells with dates older than the current date red. What I need to do now is to check for a particular item and date whether or not the corresponding "In-testing Status" cell reads "COMPLETE". If it does, I need to use a conditional formatting rule to return formatting to normal.
What I am unsure of is how exactly to retrieve the value of the corresponding "In-testing Status" cell.
Unfortunately I can't use a macro-enabled workbook in this environment
I have use excel 2007. In our sheet i have in cell "B3" product name i.e. "abc" , "xyz" etc. That is called sales of goods.
In cell "C3" i have number of quantity
If "B3" is "abc" then only calculate below :
1st option : If product name is "abc" then only calculate (which is cell "B3") & cell "c3" is >=15 & cell "c3" is<19 then message shown as "one mobile free"
2nd option : If product name is "abc" then only calculate (which is cell "B3") & cell "c3" is >=20 & cell "c3" is<39 then message shown as "two mobile free"
3rd option : If product name is "abc" then only calculate (which is cell "B3") & cell "c3" is >=40 then message shown as "three mobile free"
In view of the above which formula applicable.
I have a frequency table (attached) that I need to be able to interpolate values between the known values on something other than a linear basis (e.g. exponential or logarithmic).
View 5 Replies View RelatedAttached is a small spreadsheet, my problem is I am using Excel 2007 and it only allows me 7 nested functions and I need to do 31.
Nested Function.xlsx
I have a Billing Data where i want to Calculate TAT between two dates in Excel 2007.. I received the Invoice from Vendors on specfic date but due to discrepances, i rejected the invoice, after few date i received a rectified Invoice from Vendor... so how can i calculate the TAT from 1st Receipt to Rejection..
Column A Column B Column C Column D Column E Column F
(Receipt Date) (Rejected Date) (Re-Receipt Date) (Rejected Date) (Final Receipt Date) (Formula for Finding
Rejection TAT)
E.g : In Column F, TAT to be calculated from 1st Receipt Date to Rejection Date, but if i received the rectified bill & after inputing the Re Receipt Date in Column C, then the Cell in Column F will remain blank, but again if it is rejected due to some error, & after mention the 2nd Rejection Date in Column D, then the TAT to be calculated from 1st receipt to 2nd Rejection (Column D), but if i received the Final Rectifed Invoice & after mentioning the Receipt Date in Column E, then the Cell in Column F will remain blank.. but pls note, if the invoice is not rejected the, the Cell in Column F will remain blank..
I have tried IF Forumula but in vain.. i can only nest 1st receipt to 1st rejection i.e : =IF(AB6= "", "",(TODAY()-AB6))
I got two sheets of database and I need to fill the gaps in one of then, taking the information for the other one, I been told that I can do it with vlookup or if function?
View 1 Replies View RelatedI have someone in the company that I work for that is using Excel 2007 in compatibility mode, that is trying to make changes to an Excel 2003 file.
The file in question is a large one. She can type in the rows and columns and anything that she types will save. However if she trys to make any changes to the file in terms on calculations or highlighting specific columns, then these changes are not saved.
I have found out though that if she saves this 2003 file in the 2007 format, then all over her changes will save. She can't save it in the 2007 format due to some people still on 2003 that edit this file as well.
I have a question regarding filtering of columns. I have set up Excel 2007 so that I can click on the drop-down menu in each column to filter them.
However, in my data set there is one blank row separating two set of rows. Now, when I apply the filter on a column, all the rows above the blank row filter correctly, but all the rows below stay un-filtered.
I guess Excel only looks at the consecutive rows, then stops when it hits a blank row. Is there any way of applying the filter beyond a blank row (i.e. the whole column)?
Here's an example of what my data looks like, in reality there's 1000's of rows and 100 columns...
[Code] ........
So, what I'm after is the most recent date on which a user goes over 2000. I've populated column I manually with what the value *should* be, I just can't figure out how to do this with a formula.
Using Excel 2007, have attached the sample data as an xlsx too.
I am struggling with trying to create a Top 10 list in Excel 2007. I have googled and search the forum but could not find a solution. (Aplogies if i have overlooked a thread)
I have attached an example of my problem.
1. In Column F i would like to extract the names of the Top 10 performers, based on their respective score. Hence, based on the scoring in Column D, Column F should extract the Top 10 performer names from column A.
2. In Column G, same as above, but bottom 10 names
3. From the attachment, you will view some names are highlighted. I.e. Gary & Neil, and Ian & Michael. These are highlighted based on the fact that they have equal scores.
When extracting the Top / Bottom 10 list, i would like to rank the performers with same score differently. e.g. Gary & Neil, both scored 0%, hence they are equal. But in the Top 10 list, i would like to rank Gary higher as his absolute target is higher. (63 vs. 27) . Same applies to Ian & Michael, Michael should rank higher in the Bottom 10 List as his absolute target is higher.
I'm trying to clear conditional formatting (icon set) that I was experimenting with, but no joy at all. The only function within the "Styles" section is Cell Styles -- conditional formatting & fornat as table choices are grayed-out.
I've tried to delete and re-enter the data, clear formats, clear all, copy and paste, format painter...nothing worked.
I want to convert Hex to Binary. I want the Binary in 8 different cells.The hex input would be lets say A1 I would want to convert that to eight different cells Bit7 G10, Bit6 G12, Bit5 G14, Bit4 G16, Bit3 E10, Bit2 E12, Bit1 E14 and Bit0 E16.
Then I want another Hex input on A2 and convert that to eight diferent cells.
Bit7 K10, Bit6 K12, Bit5 K14, Bit4 K16, Bit3 I10, Bit2 I12, Bit1 I14 and Bit0 I16.
How would I do This?
I have one question about the regression. i know how can i do it lineair, exponentiel ... but how can i make a personnalised regression ? for example, if i have i function f(x)=a+b*x^2 or another function ... how can i introduce my function to draw the regression ? i have excel 2007
View 2 Replies View RelatedI created a workbook called "controlelijst.xls" using Excell 2007. In this workbook i created a sheet that i use as a template, it has conditional formatting all over it. That in fact is not the problem. I copy this template for every new issue i have.
The thing i would like to see happening now is when i enter the value "Y" in cell O10 that the active sheet on wich the value is entered becomes hidden. Because the reason for setting this value is that all conditions are met on this sheet and it does not have to be visible anymore unless i unhide it.
I'm trying to rotate the cells (not just the text in the cells) to a 45-degree angle. I'm using 2007 excel. Can this be done?
View 3 Replies View Relatedmacro code I need to look at the active sheet and turn the filter off on row 1 which could be turned on or already turned off
N.B. Excel version 2007
Would like to anchor jpg files in an excel worksheet, so that when when sorting, the picture travels with the cell.
View 3 Replies View Related