Excel 2007 :: Look Up Min / Max Values

Oct 23, 2013

I am working with excel 2007 in windows 7. I am working with small animals that have been outfitted with a RFID (radio-frequency ID) tags with unique UID codes. In a sheet called Tag_info I have a list of the unique UID's of the tags that are in use along with a number of parameters (the colony in which the animal with this tag is situated, if it was treated with something, its age etc). I left out most of the parameters because they aren't relevant to my question, but it looks like this with each UID only once in the list:

A
B
C

1
UID
Colony
Treatment

[Code] ........

In a 2nd sheet, a ton of data is saved by the scanners that read the tags as the animals pass by scanners in a number of locations. The relevant data for my problem is basicly the timestamp (UTCTime_Rounded). Since animals pass by the same scanners multiple times, and scanners may read the same 'passing' as multiple signals the column with UID's here contains tons of duplicates (unlike in the Tag_info sheet where every UID is only displayed once). Once again, I left out the irrelevant data for simplification so that the data looks like this:

A
B
C
D

1
UID
Address
UTCTime_Rounded
Age at read

[Code] ........

So finally, what am I looking for? I want a formula to look up the UID's from the Tag_info sheet to find and return the first and the last timestamp (UTCTime_Rounded) for that UID in the RFID_Scan_values sheet.

So that formula basicly has to return the min and max values for UTCTime_Rounded, for each of the UID's in Tag_info. The output would look like this (I did it manually for this dummy dataset since I didn't get any formula to work yet):

A
B
C
D

1
UID
Colony
Treatment
First scanned

[Code] ........

Tag info And then a similar column for the Last scanned, max values.

View 9 Replies


ADVERTISEMENT

Excel 2007 :: Sum 2 Values In Same Cell

Nov 12, 2012

Sheet1ABCDEF1THE SUM OF2GAME NUMBERSINDIVIDUAL 3GAME
NUMBER41101928=152112029=263122130=374132231=485142332=596152433=6107162534=7118172635=81291827369Excel 2007

Sheet1HIJKLMN12Last Nights Fantasy 5 Numbers3411/11/12051922293256sum of 7digits/#5142589pattern21110101112Full PkgAll Possible Patterns of 13CombinationsSum Of Digits1415129,0241111116193,536211101736,288221001816,12831100191,728320002028841000Excel 2007

Need a formula in Cols J7:N7 to return the sum of the values input in J4:N4 as a single digit. The table in the first image shows what the results should be.

View 9 Replies View Related

Excel 2007 :: Counting Unique Values

Dec 9, 2013

I am using Excel 2007

I have 50 000+ rows that covers fiscal years from 2006 to 2014 and I want to calculate how many unique clients are there per asset type per fiscal year. In addition, the results table needs to adjust to filters i would use on the raw data..

As:

2007
2008
2008

Commodity
45
FX

Other
other

Here is a sample file: SampleData.xls

View 8 Replies View Related

Excel 2007 :: How To Change DEFAULT Values

Mar 3, 2011

If I want to format a cell I go to that menu. Choose formatting number.

The default value will appear with 2 decimal digit.

I want to change it to 3. How can I do so?

Is it possible to change the DEFAULT values that Excel 2007 offers?

View 3 Replies View Related

Excel 2007 :: How To Sort Values Of Date

Apr 1, 2013

how to soft vaue of date in excel 2007. only arrange by date (not including month).

for examples:

it like that:
13/07/2012
15/01/2012
18/04/2012

View 1 Replies View Related

Excel 2007 :: Dynamic Sum Of Values In Every Fourth Row

Sep 29, 2011

I am using Excel 2007. I have a table with department names and the number of employees in each department. Currently, I'm using the formula :

=SUM(C12,C16,C20,C24,C28,C32,C36,C40,C44)

However, if another section is added to the database I have to update each formula. I'm looking for a way to get my totals no matter how many sections I add to the table.

View 4 Replies View Related

Excel 2007 :: Test For Existing Values

Nov 7, 2011

I have a workbook with several tabs. the first tab is a data input sheet: subtotals from this sheet get posted to cells on the other sheets. at the top of the Data sheet is a drop down validation list that the user will select the next month from. On each of the other sheets, is a grid with calendar months down the left hand side and years across the top:

Excel 2007BCDEFGHI26Incoming111009080727Month201220112010200920082007200628
JAN1201135317522050194029FEB1392150817082130217230MAR1538164117831823246831
APR1338132717301819211632MAY1485129615762008244933JUN14991380162618652028187034
JUL15491382166020362091170335AUG16531383148619252132197236SEP15901411155620051982214937
OCT23391324159420732014247738NOV1440146718842186282139DEC15631602203721472197Incoming

I am trying to figure out a simple method to check whether there is data on any of the four other sheets in the spot corresponding to the month selected by the user on the Data tab. the format of the validation list dates are dd/mm/yyyy in cell B2 on the data tab.

View 3 Replies View Related

Excel 2007 :: Count Of Unique Values

Nov 18, 2011

I would like to get the count of unique values in my 2nd column using my values in 1st column as the criteria. Below is my example of my data set.

EFGH5DeptHC

6A304794A17B86122B38B86179C39B90050D1310C82705

11C94955

12C308165

[Code] .........

Excel 2007

I would like to see the count on column H (highlighted in yellow).

View 1 Replies View Related

Excel 2007 :: Sum Values From Set Range In 4 Different Files?

Jan 16, 2012

I have 4 different excel files in C:Reports (SupplierA.xls, SupplierB.xls, SupplierC.xls and SupplierD.xls) all with a page called "Summary" (like below) in a set range A2:F5.

Fruit
Monday
Tuesday
Wednesday
Thursday
Friday
Apples
2 4 1 7 8 Oranges
2 3 4 6 9 Lemons
4 5 6 6 6 Pears
1 2 3 5 5

I also have a summary excel file in C:Totals called "Supplier Totals" that has a summary page that I want to total up all my suppliers A, B, C and D (same as above A2:F2). How can do this in VBA?

I am using Excel 2007.

View 1 Replies View Related

Excel 2007 :: VBA Get Unique Values Set In Filter

Nov 29, 2013

[Excel 2007]. I'm trying to get the list of unique values from a Filter on a column in VBA.

I've given the column a Range Name

Code:
Dim rClient As Range
Set rClient = ws.Range("CLIENT_NAME")

Dim aClients() As Variant
aClients = rClient.???

There's nothing in the range method dropdown that obviously relates to the Filter on the range.

Is it something to do with the Table method?

View 2 Replies View Related

Excel 2007 :: VBA To Replace Formulas In Certain Cells With Their Values?

Nov 8, 2011

I am running Microsoft Excel 2007 on Windows XP. Right now, I have the standard macro set up that will replace formulas with their values. It's the standard macro that does this for the entire sheet:

Code:
Sub All_Cells_In_Active_WorkSheet_1()
With ActiveSheet.UsedRange
.Cells.Copy
.Cells.PasteSpecial xlPasteValues
.Cells(1).Select
End With
Application.CutCopyMode = False
End Sub

However, with this being a daily task, the issue is that this wipes the formulas out for future dates, which is obviously problematic. To be more specific:

I have one tab (HISTORICAL) with over 200 rows with each business day this year. Columns B through H will pull data from two other tabs (ENTRY1 and ENTRY2) that is entered daily, using a formula that tells Excel to only pull the data for the current date:

Code:
=IF(A224=ENTRY1!B1,ENTRY1!B2,0)

So each day, someone will open this sheet and input their data on the ENTRY1 and ENTRY2 tabs. These numbers will auto populate over to the HISTORICAL tab for that specific day.

Also on each day, someone else will open the sheet and go to the HISTORICAL tab and run the macro that converts the formulas on that sheet to the value.

I want to be able to run the macro only for the row with the current date (and any date before will be fine since those will already be converted anyway).

So, taking today for example, when I run the macro, I want it to convert the data only in the 11/8/2011 and previous rows, but NOT for the 11/9/2011 and later rows.

View 3 Replies View Related

Excel 2007 :: Changing Date Values Formula?

Apr 26, 2012

I work with several dates in Excel 2007. What forumula can I put in a blank cell that would change the below "Start Date" to 3/1/12 if the date displayed is less than 3/1/12? Also, if a cell in the "Start Date" column is blank, how can I populate a blank cell with a specified date value such as 3/31/12?

ShipPositionStart DateEnd DateBoard DaysBlankMASTER2/15/2012-40953BlankCH.MATE1/22/20123/12/201251Blank2ND MATE2/29/20123/31/201232Blank3RD MATE3/1/2012-40968BlankBOSUN3/5/20123/31/201227

View 5 Replies View Related

Excel 2007 :: How To Ignore Zero Values And Associated Julian Date

Jan 15, 2013

Using Excel 2007

I have a table of four columns

First column is the Julian Date 1-365

The others are summarys per Julian date

Some Julian dates don't have any date to summarize

When charting How can I ignore the zero values and the associated Julian date, without literally removing each and every row manually that has no data?

View 7 Replies View Related

Excel 2007 :: How To Filter Values In Pivot Table

May 31, 2013

In Excel 2007 is it possible to filter the "Values" in a Pivot Table?

I am tracking the Gross weight of shipping containers. My table sums the weight of all items in a container by container number. So my rows are 9 digit container numbers and my data values is a Sum of part weights. I want to be able to filter out containers above a certain weight.

for example:

Row Labels Sum of Gross Wt. - Lbs
10003150588929
10003153258700
10003155984958
1000315651530
10003156549761

I know I can simply copy and paste into a new tab and sort it there, but I'd like to be able to do it internal to the pivot table if that is possible.

View 3 Replies View Related

Excel 2007 :: Returning Values Based On Criteria?

May 17, 2014

I'm using Excel 2007

I have the below data in sheet 1

In a separate column on sheet 2 i want to return the value of the data in ACC1 if the data in DEB/CRED is LC or SC and the value of the data in ACC2 if the data in DEB/CRED is SD

DEB/CRED
ACC1
ACC2

[code]....

View 7 Replies View Related

Excel 2007 :: Union Of Values In 2 Columns To One In Increasing Order?

Jul 20, 2012

I have to find the union of 2 columns in excel and club those 2 columns into a single column with values in the increasing order.eg: column 1- 0 2 4.. , column 2- 1,3,5.. final result in column 3 should be 0 1 2 3 4 5...plz let me know the code for this that i can run in VB editor(- excel 2007)

View 9 Replies View Related

Excel 2007 :: Multiply Series Values On The Fly Before Presenting In Chart?

Jun 4, 2014

I would like to multiply a serie in 'series values' (before presenting on a chart) with a factor (in a formula like ='[1]name'!$V$2:$V$148)

in other words I would like to do something like
=('[1]name'!$V$2:$V$148)*50

but I don't seem to succeed with the correct syntax.

In Excel searching for "multiply series values" under "edit series" there is to read:

"Use this option to include additional data series on the chart or to modify the name and values of existing data series without affecting the data on the worksheet."

So what I want to do seems to be possible.

Excel 2007 version 12.0.6611.1000

I know I can create a temporary column with the multiplied values but THIS IS NOT the way I want to solve the problem.

View 6 Replies View Related

Excel 2007 :: Locate Peak Values In A Column Of Numbers

Nov 8, 2013

In the attached spreadsheet I would like to locate the peak values of the numbers in column "F". I don't know if this is best done with a series of functions or by using a macro.

Column "F" translates to the light blue line on the attached chart. Column "F" (MACD) is the difference between a 12 week exponential moving average (EMA) and a 26 week EMA.

I would like the peak values from column "F" re-stated into column J,K,L or M. Ideally I would like to find the highest peak that occurred in a rolling 12 weak period. So not all peaks would need to be posted. By doing this I would only be identifying longer trends .

I'm using Excel 2007. 25 years experience using Excel and functions. Limited experience with Macros though long ago I used to write C code.

View 3 Replies View Related

Excel 2007 :: Select And Separate Marked Values In The Sheet

Jan 7, 2014

I have spread sheet and values in some columns have highlighted in color.What I have to do is I need to quickly separate the highlighted data and put in the other spreadsheet.

View 5 Replies View Related

Excel 2007 :: Display Duplicate Values (Pivot Table)

Feb 13, 2012

I am trying to have duplicates and their corresponding data appear in my pivot table. Assume I have a list of over 1000 stores. Let's say store 101 appears twice in my data file.

When I create my pivot, the 101 only appears once and the data is consolidated. Is there a way to ungroup/display duplicates?

View 2 Replies View Related

Excel 2007 :: Loop Expression Won't Recognize Values Are Equal?

Apr 20, 2012

(Excel 2007) The issue I'm having is that a loop statement of mine is failing to recognize that a couple values are equal. It works for the first 3 iterations of the loop, then stops recognizing. I tried copying another set of numbers in the failing one's place, and that actually worked. I can't attach anything, so I'm including a link to a detailed screen shot with some notes on it and code that I'll host on my site. Not sure how else to explain the issue, but if you take a look at the screen shot you can see the excel sheet being worked on and the vba code running. I will also include a text file of the code

Here are the links to the screen shot and text file of my code
Text file
Screen Shot

View 3 Replies View Related

Excel 2007 :: Conditional Formatting Based On Two Previous Values

Feb 19, 2013

I'm creating an excel document that tracks the amount of time someone has (in months) in the program. Certain residents are able to 'fast track' if they meet conditions, and I am trying to create this spreadsheet so that anyone who looks at it can tell who qualifies (and when).

The issue I'm having is with conditional formatting, because I don't know how to do it with mutliple conditions.

Column C is their previous time (months) in the program
Column D is their current time (months) in the program
Column E is their total time in the program (Sum C+D)

Coumn E is what I would like to format, based on the following rules set out in the program manual:

If previous time is 9 months or more, a resident is eligible to fast track after 6 months current time (format green).
If previous time is less than 6 months, a resident is eligible to fast track after 9 months current time (format green).

I understand that their is an odd gap - but these are the rules currently set out by the program manual, which is what I have to follow.

I'm using Excel 2007 - if that changes anything.

View 3 Replies View Related

Excel 2007 :: Extracting And Adding Values From Within Text Strings?

Jun 2, 2013

I am trying to extract values from a text string and add them up in Excel 2007. So far i have been successful in extracting the value out of the text string like this - =MID(I6,AD6,3) where AD6 holds the position number in the text string to start from. So it's working OK for one row but i need to do the same thing on multiple rows where the text string can be in different columns and I'd like it to automatically pick up the non-blank cell.

each row only has one column with text in it and the value i need to extract is always after "$". this is a working spreadsheet so the text string could move from column to column over time and I'd like my formula to be able to detect which column to read from. I then need to add up all the values from each row.

View 9 Replies View Related

Excel 2007 :: Cell Color Change Based On Values (Range)

Oct 2, 2011

How to change the background cell color based on value ranges(s)

I tried conditional formatting but it works between two values only, in my assignment I want to show:

River levels in relation to flood class
>=2m =2.6 =3m major flood (background turns red)

I hope it is possible in Office 2007

View 9 Replies View Related

Excel 2007 :: Alternative To Convert Formulas To Values That Keeps Hyperlinks Active?

Oct 16, 2013

I'm using Excel 2007 and I'm a VBA novice.

Problem: The macro will be assigned to a command button and will be used by laypersons when they finish filling in data on a worksheet in Workbook 1. The sheet contains maybe 30 columns and 50 rows with a mix of fixed values and values generated by Vlookup and Indirect formulas. I need to copy the sheet from Workbook 1 to Workbook 2. Workbook 2 will be for archival purposes so I want to convert all formulas to fixed values. The catch is dealing with some cells that contain hyperlinks to PDF files...

Current Solution: I currently do this with a macro that moves/copies the sheet from Workbook 1 to Workbook 2, it then selects all cells in the new sheet in Workbook 2, copies all cells, then pastes-special "as values" to the exact same cell locations. This works great for me since the cell formatting and data in the sheet are VERY irregular and I have merged cells all over the place. This method keeps the exact formatting I need maintain:

ActiveSheet.Copy After:=Workbooks("Workbook2.xlsx").Sheets(1)
ActiveSheet.Cells.Select
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Application.CutCopyMode = False

The problem is that a few of the cells have hyperlinks with "friendly names" and I lose the hyperlinks when I convert to values. The hyperlinks are not inserted directly, they are created by a formula, =HYPERLINK("N:Filepath"&C16&".PDF", "Click_For_PDF"), and the row and column that contains the hyper link will vary for each sheet I want to migrate from Workbook 1 to Workbook 2 using this macro. I want to keep the hyperlink active with the clickable friendly name in Workbook 2.

Possible Solution: I'm open to all types of solutions, but is there a way to essentially use my existing macro but AFTER converting to values with paste-special, go back to the original sheet in Workbook 1 that still contains formulas (or maybe a temporary duplicate sheet I migrate to Workbook 2?), search for all cells with a "value" of "Click_For_PDF", copy ONLY those cells and paste (normal) into the corresponding cell locations in the sheet in Workbook 2 that now contains fixed values? ALL of my hyperlinks have the friendly name "Click_For_PDF" so it should be an easy way to identify the hyperlink cells. The cell location of the hyperlink copied in Workbook 1 needs to carry over to Workbook 2 and I said before, the row and col vary with every sheet I want to archive with this macro.

View 9 Replies View Related

Excel 2007 :: Macro To Insert Rows Based On Cell Values

Dec 19, 2013

a macro to insert rows based on certain cell values in column A.

I have uto 300 rows of data. Below is an example of column A.

R1
1
2
3
4
5
6
7

[Code]...

If (above the R) is an 8, I need to insert 2 rows above that R and directly below the 8.

If (above the R) is a 9, I need to insert 1 row above that R below, directly below the 9.

(Below the R there is always a minimum of 8 digits with the 9 and 10 being random).

I have excel 2007

View 5 Replies View Related

Excel 2007 :: Lookup One Value And Returning Multiple Values (Horizontally) With Two Sheets

Jul 31, 2014

I'm basically working from 3 sheets for this so I'll start with an example of the data I'm using:

1st sheet:

table.tableizer-table {
border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif
font-size: 12px;
}
.tableizer-table td {
padding: 4px;
margin: 3px;

[Code]....

I have 180 rows of data like this one in the first sheet

Second sheet(named sheet 1) is not used for this

Third sheet(named sheet 2):

table.tableizer-table {
border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif
font-size: 12px;
}
.tableizer-table td {
padding: 4px;
margin: 3px;

[Code]....

Basically I'm trying to find column #3 value in my third sheet and return the second column value. Problem is that the data is located more than once in the third sheet so I need the value of each one of them. So, with this example, Q5942X is located twice in the third sheet and each time, it has a quantity of 2. I would need either to return the value 2 twice horizontally or even better, add the two together. The first sheet, the example is row #45.

This formula should be in the column following "majoration".

I am using excel 2007 and windows 7.

View 3 Replies View Related

Excel 2007 :: How To Get Dropdown Box Results To Show Unique Values And Non-Blank Entries

Sep 27, 2012

I am using a ComboBox in Excel 2007 in a UserForm. It is drawing on a row source which populates empty cells duplicates. How do I get the drop down box results to only show unique values and nonblank entries?

View 4 Replies View Related

Excel 2007 :: Userforms - Input Cell Value (via Text Box) And Output Corresponding Values From Resulting Row

Jun 24, 2013

I have a simple spreadsheet of an inventory. Each row on this spreadsheet represents the data related to an item. I would like for a user to be able to INPUT a serial number via a userform. Then, I would like for the program to OUTPUT some information about that particular item (a few cells that should be on the same row as the serial number).

I attached an image diagram that may better represent what I am trying to do.

View 9 Replies View Related

Excel 2007 :: Determining / Counting Number Of Values Used In SUMIF / SUMPRODUCT Function

Aug 2, 2014

I am using Office/Excel 2007 and Windows 8

I want to determine the number of values SUMIF/SUMPRODUCT functions used/checked to arrive at the answer, i.e. 95 for row 2 and 116 for row 3. A function that can give a 3 and 2 respectively.

Example:

Results for Row #2 gives: 95 with 3 values picked up under "Rate"

Results for Row #3 gives: 116 with 2 values though three places were checked up under "Rate"

How can I count the number of these values referencing at the "Rate" like in the functions used.

I managed to use SUMIF/SUMPRODUCT functions to calculate totals based on "Rate" in row one.

I tried COUNTIF function, but allows only field/heading.

A
B
C
D
E
F
G

[Code] ..........

results for each formula used

95 formula: =SUMIF(B$1:G$1,B$1,B2:G2)

95 formula: =SUMPRODUCT((B$1:G$1=B$1)*(B2:G2))

3 formula: =COUNTIF(B1:G2,B1)

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved