When i add a new sheet in excel 2010 at that time i getting error that "Unable to run this command on multiple selections in vba". This error get on both through code and manually.
View 1 RepliesHaving problems with the code below on a 2010 Excel spreadsheet. The function flags me at first line and highlights Mid. I get a "compile error, cannot find project or library". I'm trying to set GetSheetName = m_sSheet but the GetSheetName function is not declared as returning any type.
Code:
Function GetSheetName(ByVal m_sFormula As String) As String
Dim m_sSheet As String
m_sSheet = Mid(m_sFormula, 2, InStr(m_sFormula, "!") - 2)
If InStr(m_sSheet, "'") Then
m_sSheet = Mid(m_sSheet, 2, Len(m_sSheet) - 2)
End If
GetSheetName = m_sSheet
End Function
I am using Excel 2010, I receivean error message "end if without block if" I've been working on this forseveral days and I have been un-successful. The code is to look at what is in combox1 and based off what is selected by the user, it will locate that tab and put in the information from the userform.
Private SubCommandButton1_Click()
"S:location of file.xlsx"
'UPDATES WORKBOOK
[Code]......
I had a spreadsheet in 2007 with a drop down list of date. So that these showed as a date and not the numerical value I found and used the following.
[Code] .....
However I've now had a upgrade to 2010 and I get a compile error: Can't find project or library and the word Format is highlighted.
I'm using excel 2010 and pdf creator to make a pdf (and open it automatically). It works with the following code:
[Code] .....
path and filename are previously defined objects.
I'm using pdfcreator because the code also has to be used with excel2003 on another pc. The problem is that I get an error (probably for trying to open the newly creating pdf-file).
Error 2417024894 (80070002) during execution. Method run of Object IWshSell 3 failed.
Using Excel 2010. I have a ComboBox (Not ActiveX) on a worksheet
I'm trying to add an event so that when user click on a choice a macro is fired using the selected item as citeria for a filter When I click on the drop down and make a selection I receive this error msg:
Cannot find the macro "cboUserSelection_Change" The macro may not be available in this workbook or all macros may be disabled
I also tried _AfterUpdate - similar error message.
I added the Combo Box code to the Worksheet code, not a standard module
I was able to run a quick test macro so I do not believe "all macros are disabled"
Excel 2010. Windows 7
Run-time error '-2147467259 (80004005)':
An unexpected token ""20*"" was found following "1' AND
PERIOD = LIKE*. Expected tokens may include: "". SQLSTATE=42601
code died at RS.Open SQL, CN
/////////////////////////////////////////////////////////
Sub GET_OSI
Dim sn as String, osi as string, saposi As String
[code]....
I'm the final stages of testing a userform that, in response to a button click, copies certain cells from a big messy worksheet and pastes the relevant ones (based on user input) in a clean sheet. Suddenly, I started getting a 'divide by zero' error for the following line:
VB : UpCount = PickNum - 6 + ((PickNum / 12))
UpCount and PickNum are both declared as Double, though this shouldn't matter. UpCount is being assigned a value here for the first time, and PickNum varies from 1 to about 250 depending on input.
Obviously I'm only dividing by a constant here, which is VISIBLY not zero. This error only occurs for certain ranges of PickNum...something like 50-70. Interestingly, in trying to debug it, I added:
VB:
Msgbox(PickNum)
Msgbox(54/12)
...since PickNum was 54 as I was getting this error. Just dividing 54 by 12 ALSO got a div by zero error.
Perhaps I should mention I'm using VBA in Excel 2010 for Mac.
I get syntax error on return statement. I am using Excel 2010.
View 2 Replies View RelatedUsing Excel 2010.
I extracted data from .pdf to Excel using Able2Extract. Now I need to scrub the output a bit.
I see commonalities in the data for the start and stop of each set of data that I can key in on.
Once I find the start and stop points for each set of data I would like to fill all rows in-between the points and then discard anything that remains outside of these boundaries.
I have something wrong in my logic, way too many rows are deleted.
Code:
Option Explicit
Sub GetLineSets()
'Purpose: Identify relevant line sets, delete all other rows
Dim wbBook As Workbook
Dim wsData As Worksheet
Dim strFormula As String
Dim lngRows As Long
Dim C As Range
Dim blnFlag As Boolean
[Code] ......
Using Excel 2010.
I have a formula in a workbook that links to another workbook and returns a #VALUE! error. The formula is:
=OFFSET(INDEX('\srvrdatakenny cantrell$Kenny''s FolderPayroll[DI Staff List.xls]Sheet1'!$D$6:$D$60,MATCH(TRUE,'\srvrdatakenny cantrell$Kenny''s FolderPayroll[DI Staff List.xls]Sheet1'!$D$6:$D$60=B3,0)),0,2)
However, when I open the source workbook, the cell updates correctly. How can I get the cell's formula to update when the source data workbook is closed?
I am writing macros for a pop up calender in excel 2010. I followed instructions in the link below but at the testing step # 7 it returned; 'run time eror 424 object required'. It's my first time writing macros.
[URL]
I've got a file that works fine on my computer. When I email it to anyone with 2010 and they open it from their email account (Outlook 2010), the file automatically opens up in 'Protected Mode'. If the user selects "Enable Editing" the user receives 'Run Time error 91: Object variable or with block variable not set'.
If the user closes out the vba error and saves the file to their computer and reopens the file, it works fine.
BTW, it is not a complex macro, it is error out at
ActiveWorkbook.Sheets("Worksheet").Select
Creating a spreadsheet in Excel 2010 and am creating the dropdowns from a separate sheet in the workbook. There are no spaces and I don't know why I keep getting the "The Source currently evaluates to an error."
I am entering the Data Validation to reference the first cell I need "=INDIRECT(H3)"
I have put the spreadsheet on dropbox. When you select the "Sequencing Platform" drop down, it need to give just the dropdown for the platform selected.
[Code] ..........
I have created a macro that creates a powerpoint from excel in office 2010. I have followed all the required steps, like adding object library and all. but still many times the PowerPoint crashes at slide7, 8 or 9 and have to restart. I generally get the above given error.
Code:
Sub CreatePowerPoint()
Application.ScreenUpdating = False
'Macro Created by Pallavi NC (pallavi.nc@hp.com)
'Add a reference to the Microsoft PowerPoint Library by:
'1. Go to Tools in the VBA menu
'2. Click on Reference
'3. Scroll down to Microsoft PowerPoint X.0 Object Library, check the box, and press Okay
'First we declare the variables we will be using
[code].....
I'm using Excel 2010 and I wrote the code below to autofill a range that feeds a chart on the worksheet "Dashboard." Essentially, the user selects criteria on the Dashboard and clicks the "Submit" button, which causes an advanced filter to copy the data that matches the criteria into the range Sheets("HiddenSheet").Range("A2:H"). I need the code below to autofill the formulas in I3:Q3 in I:Q until the last row in A:H, but I keep getting a "Type Mismatch" error on the bolded line below.
One note - Columns K:Q contain formulas that feed off of Column C and into Column J - that's why the autofill range is different than the chart SetSourceData range.
Sub TimelineControl()
Dim Timeline As Chart
Dim ws As Worksheet
Dim rngforTimeline As Range
Dim LastAxis As Integer
Dim LastA As Long
[code].....
I am using Excel 2010 and I have a password protected workbook with password protected sheets that uses several macros. Most of them, in order to run, have to un-protect the sheet and then re-protect it again. This has been accomplished easily enough by adding ActiveSheet.Unprotect Password:= "mypassword" and ActiveSheet.Protect Password:= "mypassword" to the appropriate places in the script. All of my macros, which do various things like sorting and moving data, deleting blank rows, displaying dialog boxes containing warning messages etc. run fine.
My problem is this: when I password protect the sheets manually, I have checked the following options in the "Protect Sheet" dialog box. Under "Allow users of this worksheet to" I have checked 1)Select unlocked cells and 2)Format cells. After entering my password and closing the dialog box my sheet is protected, but I can edit cells in the manner my allowances permit. However, once I run any of the macros that un-protect and re-protect the sheet, I remain able to select and edit unlocked cells (practically, for my purposes, this means that I can input data which will appear in the default font size and color of the sheet) but I cannot format cells (which, practically, for my purposes would allow me to occasionally change the font color and size of the data). Naturally, after running a macro, the other cell-formatting options are unavailable to me as well. Is there any way to get my manual selections to remain in place after running a macro that functions as mine do? Or is there any way to make my manual selections the default settings for a protected sheet?
I am running excel 2010 with windows 7. I created a macro in sheet 1 and I wish to activate the macro from sheet 2 using a form button. I have entered the code below. I know how to perform this function on a more simple macro like adding names to cells. This code is a bit more complex I just dont know where to start.
Code:
Sub LoanData()
'
' LoanData Macro
[Code].....
I have 2 workbooks in Excel 2010, each contain just 1 sheet. (see attached) I need to compare on sheet 1, cell D1 and column A:A (this column will be much longer), with the data in columns C:C & A:A on sheet 2, if a corresponding match is found, the data contained in column D on the same row on sheet 2 is written to the cell with the matching data in sheet 1.
My attempt is in cell D2 on sheet1.
I am working with Excel 2010.
There are certain .xlsm files in our system (some have macros and others don't) which generate "Error: Source not Found" in the Edit Links dialog box when the Check Status button is pushed. However, the source location is correct, as you can click on Open Source and it will open the correct file.
For simplicity of explaining my issue, consider the following scenario. In my workbook "Corn Production Summary.xls_" I link to 2 source files: "Iowa.xlsm" and "Nebraska.xlsx" (Note: The extension of the summary file doesn't matter. This error happens regardless of what the summary is.)
When I open "Corn Production Summary" I am prompted to update values. I select Update and the file refreshes and recalculates appearing to have updated all values (i.e. no error messages). However, the values from Iowa.xlsm did NOT update and there was no error message indicating that the values didn't update.
To confirm this, I go to Data>Edit Links>Check Status in "Corn Production Summary" and I see that Iowa.xlsm has the "Error: Source not Found" error. I click on Open Source and once the file is open, my data in the summary file will update.
One work around was to do the following process (with the summary file closed):
1) Iowa.xlsm and Save As Iowa.xlsx (removing macros if needed)
2) Save As Iowa.xlsx as Iowa.xlsm (overwriting the file that is currently there and readding the macros)
3) Open the summary file and both Iowa and Nebraska work just fine now.
There are a lot of files like this, and because Excel doesn't prompt us that it isn't really getting the values from these certain .xlsm files we would have to search in "Edit Links" for each file to make sure that they really are updating.
One of our employees has wrote a VB project in excel 2010 which works on some machines and not others, it comes up with the below error message.
I have checked VB and there are no missing references.
Compile Error: Can't find project or library
Private Sub UserForm_Initialize()
'Empty ClientCodeComboBox
Me.ClientCodeComboBox.Clear
[Code] .....
I have to generate a report using a pivot table, that tells me what work was done on time and what was late. Entering a formula outside the pivot table sees the scheduled start date drop downs as "blank" and says they are late when they are not. I cannot seem to use the value fields when I try to create a calculation field within the table. I use 2010 at work, 2007 at home.
sep 11-17
FGHIJK10Count of WO No.
=IF(G12>=H12, I12," ")=IF(G12
I am using Excel 2010. Why I do struggle with setting the range below
Code:
Set rng = Sheets("Data").Range(Cells(4, firstcol), Cells(lastrow, lastcol))
I get run time error 1004
Tried simple code from msdn and it return same error
Code:
Range(Cells(2, 3), Cells(10, 4)).Select
I have tracked down an overflow Error 6 to the following line:
dMax = Int(s * DPoints / SPoints)
Where all variables are defined as Integers. The error goes away when I define s as Long, but I don't understand why this should be required since none of the individual variables ever exceed the scope of an Integer (-32768 to 32767).
Strangely, I get the same overflow problem when I type either of the following calculations in the immediate window:
? Int(328 * 100 / 1000)
? 328 * 100 / 1000
? 328 * 100
Note that no variables are defined, so why the overflow problem? Surely Excel/VBA should be able to work with this very basic calculation without any problem, by assigning the appropriate dimension, no?
Is this a known problem with Excel/VBA?
I am using Windows 7, with Excel 2010 (updated from 2009).
Ever since I updated to excel 2010 I am getting this error "Automation error: the object invoked has disconnected from its client" for this line
Sheets("Data-History").Range("E" & Rows.Count).End(xlUp).Offset(1).PasteSpecial Paste:=xlPasteValues
I am trying to perform an SQL query on an Excel worksheet, as per one of the examples in Michael Alexander's book "Excel and Access Integration: With Microsoft Office 2007" and I am encountering an error message.
Could not find installable ISAM
To clear I am trying to pull data from one Excel workbook to another using SQL.
I am using Excel Excel 2010 64 bit.
This is the code I am running.
Code:
Sub GetData_From_Excel_Sheet()
Dim MyConnect As String
Dim MyRecordset As ADODB.Recordset
[Code]....
I have some across a few times that relates specifically to Excel 2010 64 bit is that I need to install the following driver
Microsoft Access Database Engine 2010 Redistributable
However I already have this driver (I installed when I was trying to figure out how to write from Excel to Access).
Why am I receiving this message. It occurs when my code reaches this line:
Code:
MyRecordset.Open MySQL, MyConnect, adOpenStatic, adLockReadOnly
I have written a VBA procedure which loops through excel files in an array: in turn it opens the file, refreshes the data, saves the file and closes. I would like to write an error handler which stores the file which errored (copied from the loop iteration) and the error description to an array. The error handler should then close the file and continue with the next iteration - e.g.
Code:
If ActiveWorkbook.ReadOnly Then
ActiveWorkbook.Close
Next i
*Although a generic if error may be better.
My idea is that all files which errored in some way will be stored in an array which I can automatically print/send to a user so they can manually figure out the problem. (This element falls outside the range of this query).
Below is a simple example of my efforts which only contains one file in the array to make things simpler: the error handler section won't work, it's just there to show my thinking
Code:
Sub Refresh_CRIS()
On Error GoTo Errorhandler
Dim routepath As String
routepath = "
chdfsSharedAreaPrivateTest"
ChDir routepath
[Code] ........
Errorhandler:
On Error Resume Next
Failed = Array(i)
If ActiveWorkbook.ReadOnly Then 'Just an example for testing
ActiveWorkbook.Close
Else
MsgBox "Pivots which failed to refresh:" & Failed '& ", ", 0, "Debug" 'Test with msgbox
End If
End Sub
Using Excel 2010
I have obtained a piece of code from online that runs a macro on multiple files in a single given a single folder. when i implement it though it throws a run time error 424 "object required' and point to 'Documents.Open FileName:=path & file' line of code. Is this because Dim file type is not declared?how do i fix this problem. also, im using excel 2010.A
VB:
Sub Mac()
Dim file
Dim path As String
[Code]....
Formating Date Issue
--
Excel or Access version:Excel 2010
Computer operating system:Windows XP
Sample data:No sample data
Formula(s) right now:Mar-5-2012
Current result(s):Mar-5-2012
My goal:To convert the above text into a date format.
Error message:Can't format the way I want it.
How error occurred:No error message
Generated in:Excel
I keep getting an automation error in excel 2010 when I click on the button that executes the macro. Excel crashes when the box appears. There is no code in the error box. Why I get this error message.
View 2 Replies View Related