Excel 2010 :: Function Error In VB

Dec 21, 2011

Having problems with the code below on a 2010 Excel spreadsheet. The function flags me at first line and highlights Mid. I get a "compile error, cannot find project or library". I'm trying to set GetSheetName = m_sSheet but the GetSheetName function is not declared as returning any type.

Code:
Function GetSheetName(ByVal m_sFormula As String) As String
Dim m_sSheet As String

m_sSheet = Mid(m_sFormula, 2, InStr(m_sFormula, "!") - 2)
If InStr(m_sSheet, "'") Then
m_sSheet = Mid(m_sSheet, 2, Len(m_sSheet) - 2)
End If
GetSheetName = m_sSheet
End Function

View 1 Replies


ADVERTISEMENT

Excel 2010 :: Return In Function Gives Syntax Error

Apr 4, 2014

I get syntax error on return statement. I am using Excel 2010.

View 2 Replies View Related

Excel 2010 :: VBA Sheets Copy Function Works But Then Jumps To Beginning Of Function

Apr 8, 2014

I'm having trouble using the worksheet copy command in a VBA subroutine. I have the following line in my code:

[Code] ........

When I step through my code and execute this line, the sheet is copied as expected and put in the correct place, but then instead of the next line of code being highlighted, the pointer jumps to the first line of a function (in a different module) in my code.

View 14 Replies View Related

Excel 2010 :: Get Error While Add New Sheet

Jun 18, 2014

When i add a new sheet in excel 2010 at that time i getting error that "Unable to run this command on multiple selections in vba". This error get on both through code and manually.

View 1 Replies View Related

Excel 2010 :: End If Without Block If Error

Jun 4, 2014

I am using Excel 2010, I receivean error message "end if without block if" I've been working on this forseveral days and I have been un-successful. The code is to look at what is in combox1 and based off what is selected by the user, it will locate that tab and put in the information from the userform.

Private SubCommandButton1_Click()
"S:location of file.xlsx"
'UPDATES WORKBOOK

[Code]......

View 5 Replies View Related

Excel 2010 :: Compile Error In Combobox Value?

Aug 11, 2014

I had a spreadsheet in 2007 with a drop down list of date. So that these showed as a date and not the numerical value I found and used the following.

[Code] .....

However I've now had a upgrade to 2010 and I get a compile error: Can't find project or library and the word Format is highlighted.

View 5 Replies View Related

Excel 2010 :: Error In Shell During Opening PDF

Feb 25, 2014

I'm using excel 2010 and pdf creator to make a pdf (and open it automatically). It works with the following code:

[Code] .....

path and filename are previously defined objects.

I'm using pdfcreator because the code also has to be used with excel2003 on another pc. The problem is that I get an error (probably for trying to open the newly creating pdf-file).

Error 2417024894 (80070002) during execution. Method run of Object IWshSell 3 failed.

View 2 Replies View Related

Excel 2010 :: Combobox Event Error

Jul 10, 2013

Using Excel 2010. I have a ComboBox (Not ActiveX) on a worksheet

I'm trying to add an event so that when user click on a choice a macro is fired using the selected item as citeria for a filter When I click on the drop down and make a selection I receive this error msg:

Cannot find the macro "cboUserSelection_Change" The macro may not be available in this workbook or all macros may be disabled

I also tried _AfterUpdate - similar error message.

I added the Combo Box code to the Worksheet code, not a standard module

I was able to run a quick test macro so I do not believe "all macros are disabled"

View 1 Replies View Related

Excel 2010 :: Runtime Error When Using Like In SQL Statement

Feb 5, 2014

Excel 2010. Windows 7

Run-time error '-2147467259 (80004005)':
An unexpected token ""20*"" was found following "1' AND
PERIOD = LIKE*. Expected tokens may include: "". SQLSTATE=42601
code died at RS.Open SQL, CN
/////////////////////////////////////////////////////////
Sub GET_OSI
Dim sn as String, osi as string, saposi As String

[code]....

View 2 Replies View Related

Excel 2010 :: Testing Userform - Divide By Zero Error

Mar 26, 2013

I'm the final stages of testing a userform that, in response to a button click, copies certain cells from a big messy worksheet and pastes the relevant ones (based on user input) in a clean sheet. Suddenly, I started getting a 'divide by zero' error for the following line:

VB : UpCount = PickNum - 6 + ((PickNum / 12))

UpCount and PickNum are both declared as Double, though this shouldn't matter. UpCount is being assigned a value here for the first time, and PickNum varies from 1 to about 250 depending on input.

Obviously I'm only dividing by a constant here, which is VISIBLY not zero. This error only occurs for certain ranges of PickNum...something like 50-70. Interestingly, in trying to debug it, I added:

VB:
Msgbox(PickNum)
Msgbox(54/12)

...since PickNum was 54 as I was getting this error. Just dividing 54 by 12 ALSO got a div by zero error.

Perhaps I should mention I'm using VBA in Excel 2010 for Mac.

View 1 Replies View Related

Excel 2010 :: Logic Error In Nested If Then Statements

Oct 15, 2011

Using Excel 2010.

I extracted data from .pdf to Excel using Able2Extract. Now I need to scrub the output a bit.

I see commonalities in the data for the start and stop of each set of data that I can key in on.

Once I find the start and stop points for each set of data I would like to fill all rows in-between the points and then discard anything that remains outside of these boundaries.

I have something wrong in my logic, way too many rows are deleted.

Code:
Option Explicit

Sub GetLineSets()
'Purpose: Identify relevant line sets, delete all other rows
Dim wbBook As Workbook
Dim wsData As Worksheet
Dim strFormula As String
Dim lngRows As Long
Dim C As Range
Dim blnFlag As Boolean

[Code] ......

View 4 Replies View Related

Excel 2010 :: VALUE Error When Workbook Updates On Startup

Nov 10, 2011

Using Excel 2010.

I have a formula in a workbook that links to another workbook and returns a #VALUE! error. The formula is:

=OFFSET(INDEX('\srvrdatakenny cantrell$Kenny''s FolderPayroll[DI Staff List.xls]Sheet1'!$D$6:$D$60,MATCH(TRUE,'\srvrdatakenny cantrell$Kenny''s FolderPayroll[DI Staff List.xls]Sheet1'!$D$6:$D$60=B3,0)),0,2)

However, when I open the source workbook, the cell updates correctly. How can I get the cell's formula to update when the source data workbook is closed?

View 3 Replies View Related

Excel 2010 :: VBA Runtime Error 424 Object Required

Dec 1, 2011

I am writing macros for a pop up calender in excel 2010. I followed instructions in the link below but at the testing step # 7 it returned; 'run time eror 424 object required'. It's my first time writing macros.

[URL]

View 2 Replies View Related

Excel 2010 :: VBA Error When File Opened From Email?

Aug 30, 2012

I've got a file that works fine on my computer. When I email it to anyone with 2010 and they open it from their email account (Outlook 2010), the file automatically opens up in 'Protected Mode'. If the user selects "Enable Editing" the user receives 'Run Time error 91: Object variable or with block variable not set'.

If the user closes out the vba error and saves the file to their computer and reopens the file, it works fine.

BTW, it is not a complex macro, it is error out at

ActiveWorkbook.Sheets("Worksheet").Select

View 1 Replies View Related

Excel 2010 :: Getting Error When Try To Add Dependent Dropdown List

Oct 29, 2013

Creating a spreadsheet in Excel 2010 and am creating the dropdowns from a separate sheet in the workbook. There are no spaces and I don't know why I keep getting the "The Source currently evaluates to an error."

I am entering the Data Validation to reference the first cell I need "=INDIRECT(H3)"

I have put the spreadsheet on dropbox. When you select the "Sequencing Platform" drop down, it need to give just the dropdown for the platform selected.

[Code] ..........

View 2 Replies View Related

Excel 2010 :: Error VBA 462 Remote Server Not Found

Nov 2, 2013

I have created a macro that creates a powerpoint from excel in office 2010. I have followed all the required steps, like adding object library and all. but still many times the PowerPoint crashes at slide7, 8 or 9 and have to restart. I generally get the above given error.

Code:
Sub CreatePowerPoint()
Application.ScreenUpdating = False
'Macro Created by Pallavi NC (pallavi.nc@hp.com)
'Add a reference to the Microsoft PowerPoint Library by:
'1. Go to Tools in the VBA menu
'2. Click on Reference
'3. Scroll down to Microsoft PowerPoint X.0 Object Library, check the box, and press Okay
'First we declare the variables we will be using

[code].....

View 1 Replies View Related

Excel 2010 :: Autofill Type Mismatch Error

Mar 7, 2014

I'm using Excel 2010 and I wrote the code below to autofill a range that feeds a chart on the worksheet "Dashboard." Essentially, the user selects criteria on the Dashboard and clicks the "Submit" button, which causes an advanced filter to copy the data that matches the criteria into the range Sheets("HiddenSheet").Range("A2:H"). I need the code below to autofill the formulas in I3:Q3 in I:Q until the last row in A:H, but I keep getting a "Type Mismatch" error on the bolded line below.

One note - Columns K:Q contain formulas that feed off of Column C and into Column J - that's why the autofill range is different than the chart SetSourceData range.

Sub TimelineControl()
Dim Timeline As Chart
Dim ws As Worksheet
Dim rngforTimeline As Range
Dim LastAxis As Integer
Dim LastA As Long

[code].....

View 3 Replies View Related

Excel 2010 :: Function To Create PDF

Jan 24, 2014

The situation I have on my hands is over 200 users, were the majority can't use Excel's built in function to create PDF's.
Yes, I've tried to teach them, but I'm probably not a good teacher.

So, I've resorted to create a button at the top of the worksheet, that says "Create PDF". I thought this was gonna be very easy to program, but alas.

Is there a way to start the built-in Excel dialog that happens when you click "Create PDF/XPS" in "Save & Send"?

View 4 Replies View Related

Excel 2010 :: Error / Source Not Found With Certain XLSM Files

Nov 17, 2011

I am working with Excel 2010.

There are certain .xlsm files in our system (some have macros and others don't) which generate "Error: Source not Found" in the Edit Links dialog box when the Check Status button is pushed. However, the source location is correct, as you can click on Open Source and it will open the correct file.

For simplicity of explaining my issue, consider the following scenario. In my workbook "Corn Production Summary.xls_" I link to 2 source files: "Iowa.xlsm" and "Nebraska.xlsx" (Note: The extension of the summary file doesn't matter. This error happens regardless of what the summary is.)

When I open "Corn Production Summary" I am prompted to update values. I select Update and the file refreshes and recalculates appearing to have updated all values (i.e. no error messages). However, the values from Iowa.xlsm did NOT update and there was no error message indicating that the values didn't update.

To confirm this, I go to Data>Edit Links>Check Status in "Corn Production Summary" and I see that Iowa.xlsm has the "Error: Source not Found" error. I click on Open Source and once the file is open, my data in the summary file will update.

One work around was to do the following process (with the summary file closed):

1) Iowa.xlsm and Save As Iowa.xlsx (removing macros if needed)

2) Save As Iowa.xlsx as Iowa.xlsm (overwriting the file that is currently there and readding the macros)

3) Open the summary file and both Iowa and Nebraska work just fine now.

There are a lot of files like this, and because Excel doesn't prompt us that it isn't really getting the values from these certain .xlsm files we would have to search in "Edit Links" for each file to make sure that they really are updating.

View 3 Replies View Related

Excel 2010 :: Compile Error - Can't Find Project Or Library

Mar 4, 2014

One of our employees has wrote a VB project in excel 2010 which works on some machines and not others, it comes up with the below error message.

I have checked VB and there are no missing references.

Compile Error: Can't find project or library

Private Sub UserForm_Initialize()
'Empty ClientCodeComboBox
Me.ClientCodeComboBox.Clear

[Code] .....

View 14 Replies View Related

Excel 2010 :: Date Comparison In Pivot Table Error

Sep 28, 2011

I have to generate a report using a pivot table, that tells me what work was done on time and what was late. Entering a formula outside the pivot table sees the scheduled start date drop downs as "blank" and says they are late when they are not. I cannot seem to use the value fields when I try to create a calculation field within the table. I use 2010 at work, 2007 at home.

sep 11-17
FGHIJK10Count of WO No.

=IF(G12>=H12, I12," ")=IF(G12

View 3 Replies View Related

Excel 2010 :: Setting Range - Runtime Error 1004

May 1, 2012

I am using Excel 2010. Why I do struggle with setting the range below

Code:
Set rng = Sheets("Data").Range(Cells(4, firstcol), Cells(lastrow, lastcol))

I get run time error 1004

Tried simple code from msdn and it return same error

Code:
Range(Cells(2, 3), Cells(10, 4)).Select

View 2 Replies View Related

Excel 2010 :: Overflow Error 6 - When All Variables Defined As Integers

Jul 17, 2012

I have tracked down an overflow Error 6 to the following line:

dMax = Int(s * DPoints / SPoints)

Where all variables are defined as Integers. The error goes away when I define s as Long, but I don't understand why this should be required since none of the individual variables ever exceed the scope of an Integer (-32768 to 32767).

Strangely, I get the same overflow problem when I type either of the following calculations in the immediate window:

? Int(328 * 100 / 1000)
? 328 * 100 / 1000
? 328 * 100

Note that no variables are defined, so why the overflow problem? Surely Excel/VBA should be able to work with this very basic calculation without any problem, by assigning the appropriate dimension, no?

Is this a known problem with Excel/VBA?

I am using Windows 7, with Excel 2010 (updated from 2009).

View 9 Replies View Related

Excel 2010 :: Automation Error - Object Disconnected From Its Client

Jun 17, 2013

Ever since I updated to excel 2010 I am getting this error "Automation error: the object invoked has disconnected from its client" for this line

Sheets("Data-History").Range("E" & Rows.Count).End(xlUp).Offset(1).PasteSpecial Paste:=xlPasteValues

View 9 Replies View Related

Excel 2010 :: SQL Query DB - Error - Could Not Find Installable ISAM

Jan 19, 2014

I am trying to perform an SQL query on an Excel worksheet, as per one of the examples in Michael Alexander's book "Excel and Access Integration: With Microsoft Office 2007" and I am encountering an error message.

Could not find installable ISAM

To clear I am trying to pull data from one Excel workbook to another using SQL.

I am using Excel Excel 2010 64 bit.

This is the code I am running.

Code:
Sub GetData_From_Excel_Sheet()
Dim MyConnect As String
Dim MyRecordset As ADODB.Recordset

[Code]....

I have some across a few times that relates specifically to Excel 2010 64 bit is that I need to install the following driver

Microsoft Access Database Engine 2010 Redistributable

However I already have this driver (I installed when I was trying to figure out how to write from Excel to Access).

Why am I receiving this message. It occurs when my code reaches this line:

Code:
MyRecordset.Open MySQL, MyConnect, adOpenStatic, adLockReadOnly

View 9 Replies View Related

Excel 2010 :: Error Handling Routine Which Stores Name Of File

Jun 3, 2014

I have written a VBA procedure which loops through excel files in an array: in turn it opens the file, refreshes the data, saves the file and closes. I would like to write an error handler which stores the file which errored (copied from the loop iteration) and the error description to an array. The error handler should then close the file and continue with the next iteration - e.g.

Code:
If ActiveWorkbook.ReadOnly Then
ActiveWorkbook.Close
Next i
*Although a generic if error may be better.

My idea is that all files which errored in some way will be stored in an array which I can automatically print/send to a user so they can manually figure out the problem. (This element falls outside the range of this query).

Below is a simple example of my efforts which only contains one file in the array to make things simpler: the error handler section won't work, it's just there to show my thinking

Code:
Sub Refresh_CRIS()
On Error GoTo Errorhandler
Dim routepath As String
routepath = "
chdfsSharedAreaPrivateTest"
ChDir routepath

[Code] ........

Errorhandler:
On Error Resume Next
Failed = Array(i)
If ActiveWorkbook.ReadOnly Then 'Just an example for testing
ActiveWorkbook.Close
Else
MsgBox "Pivots which failed to refresh:" & Failed '& ", ", 0, "Debug" 'Test with msgbox
End If
End Sub

Using Excel 2010

View 5 Replies View Related

Excel 2010 :: Random Numbers In One Function

Jul 22, 2012

I'm currently working on my masters dissertation and am using excel 2010.

Basically, I'm trying to generate a list of say, 1000 numbers within a range. I can already do this using the rand() function. However, I need excel to take each random number, apply it into a formula, and then list the answers in a seperate location. This would be easy to do if there was one simple function (which i could just insert into any adjacent cell). The problem is that each random number value is input into a table. The table, which has about 10 columns and 200+ rows, gives one final answer.

I'm sure there has to be a faster way than creating 1000 tables for each random number generated.

Let's say I have a list of 1000 random numbers in sheet 1. the function table is in sheet 2 and produces the answer in the same sheet, in a single cell. I'd like excel to use each random number generated, input it into the function table, attain the answer from the table, and list it in the cell next to the random number.

View 2 Replies View Related

Excel 2010 :: Creating VLookUp Function In VBA

Dec 28, 2011

Im trying to write a code in vba in Excel 2010 that would incorporate the vlookup function in excel.

My Data Looks like this:

List 1Weight 1List 2Weight 2List 3Weight 3List 4Weight 4a2.00%j20.00%a14.00%p2.00%b4.00%k32.00%d2.00%y3.00%
c7.50%e10.00%g14.00%u6.00%d8.00%d15.00%h20.00%h7.00%e9.00%q13.00%y45.00%f8.00%f20.00%r5.00%q5.00%
d9.00%g35.00%n5.00%t10.00%h10.00%r14.00%i4.50%w15.00%b0.18Z0.04S0.04Total100.00%Total100.00%Total100.00%100.00%

Where I have X number of Lists, each composed of two columns. The 1st column has the name of each item in each list, and the 2nd column has the value for that item.

What I'd like to do is create a function that would let me choose two lists, and tell me the amount of items in List X and what their values are in List Y, and then total them. Also, I would like it to work the opposite way, and tell me the amount of items in List Y and what their values are in List X, and then total them.

So for example, If I wanted to look at lists 1 and 2, the function would calculate that for List 1, Items D & E are found in List 2 and have a total value of 25%. For List 2, Items D&E are found in List 1 and have a total value of 17%. For all items not in both lists, it would return values of 0.

The code I came up with so far looks like this:

Function AK_Overlap_Go(x, y)
Dim Temp(1 To 2, 2 To 1)
Dim x As Integer

[Code]...

One of the problems I'm having is that the lists contain a different # of items, and so I think I need to loop the vlookup for each row. However, I'm not sure how to do that and get the cumulative values for each list.

View 3 Replies View Related

Excel 2010 :: Copy And Paste Function?

Apr 18, 2012

The problem is that whenever I have any browser open, IE, Chrome, Firefox, etc... the Cut & Paste, Copy & Paste function does not work correctly in Excel 2010.

When I Cut or Copy the blinking marquee around my selection briefly appears and then disappears. When I try to paste, I only have two options under the paste special function: Unicode Text and Text, same with cut and paste, however, the text doesn't actually cut, it only copies.

As soon as I close down any of the mentioned browsers, the full functionality of the cut/copy & paste functions are restored, no need to restart excel.

I need to have open a browser most of the time for work as our system is web based, so closing and re-opening is more than just an annoyance.

View 2 Replies View Related

Excel 2010 :: Random Numbers In One Function?

Jul 22, 2012

I'm currently working on my masters dissertation and am using excel 2010.

Basically, I'm trying to generate a list of say, 1000 numbers within a range. I can already do this using the rand() function. However, I need excel to take each random number, apply it into a formula, and then list the answers in a seperate location. This would be easy to do if there was one simple function (which i could just insert into any adjacent cell). The problem is that each random number value is input into a table. The table, which has about 10 columns and 200+ rows, gives one final answer.

I'm sure there has to be a faster way than creating 1000 tables for each random number generated.

Let's say I have a list of 1000 random numbers in sheet 1. the function table is in sheet 2 and produces the answer in the same sheet, in a single cell. I'd like excel to use each random number generated, input it into the function table, attain the answer from the table, and list it in the cell next to the random number.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved