Excel 2010 :: Hyperlinks Randomly Disappear In Workbook

Aug 21, 2013

Hyperlinks are used to navigate internally throughout the workbook on a menu page and back. The hyperlinks started acting up after i saved to xlsm. Have since saved it back to xlsx but now the hyperlinks randomly disapper despite re-adding them over and over again.

View 2 Replies


ADVERTISEMENT

Excel 2010 :: Command Buttons Disappear

May 16, 2011

I'm using excel 2010. I have a spreadsheet with a row that is hidden. One cell in this row contains a button. I have a macro that copies this hidden row, inserts it at another point on the spreadsheet and unhides it. It works great in excel 2007, but the button on the hidden row disappears when I close the sheet and re-open it.

View 7 Replies View Related

Excel 2010 :: Adding Randomly Generated Value To Range?

Apr 7, 2014

Not sure if there is a way to do this. I'm using excel 2010. I used this function

=INDEX(Sheet5!A1:A149,RANDBETWEEN(1,ROWS(Sheet5!A1:A149)))

I have a list on names that is in the range on Sheet5!A1:A149 I'm using the function to randomly select one of those names.

What I want to do: I want to add the randomly generated name to a range that I can then refer to later to see if that name has already come up. So I know if that name has already been used.

View 3 Replies View Related

Excel 2010 :: Hyperlinks Not Working When Spreadsheet Moved

Oct 17, 2013

Using MS Excel 2010.

As I understand it hyperlinks set in a spreadsheet should work regardless of where you save and/or copy the spreadsheet i.e. as long as the directory location of the location / file the hyperlink is referencing doesn't change (notwithstanding, the user must have appropriate access rights to the relevant directory locations)

However, the situation I have is the spreadsheet was generated and saved to directory location A (intention being this would be the 'master' yearly template) and the hyperlinks set, all of which work when you open the spreadsheet in this directory location. But when I copy the spreadsheet to directory location B, which is intended to be the yearly 'register' location for the spreadsheet, none of the hyperlinks work? When I hold my cursor over a link in the copied spreadsheet, in directory B, I do not get a 'pop-up' path like I do in directory A and when I click a link I get an error message:

Microsoft Excel The address of this site is not valid. Check the address and try again.

As stated above the documents the hyperlinks relate to have not moved, they remain in the same template directory (i.e. the link path has not altered).

View 1 Replies View Related

Excel 2010 :: Extract Hyperlinks Using Advanced Filters Using A Table

Jul 4, 2014

I'm creating a database that contains a columns of hyperlinks and background color.

I've created code on Excel 2010 with advanced filters to copy selected rows to another worksheet. The extract works fine and those cells with hyperlinks and various color codes from the original database "appear" to have been extracted correctly.

However, a closer look shows the hyperlinks on the target worksheet are just blue underlined texts...with the links no longer working. Is there a way for me to correct this?

View 9 Replies View Related

Excel 2010 :: Hyperlinks With JPG Files Using Internet Explorer Do Not Show Pictures On Win7

Jan 26, 2013

In Excel 2007, Hyperlinks in cells pointing to jpg files in a subfolder display with internet explorer. On my WinXP/Intnernet Explorer 8/Office 2007 system these links work fine.

When sending the excel and jpg files to another person with Win7/Office 10, jpg hyperlinks work and launch Internet Explorer but come up blank. (Hyperlinks to PDF files work fine and show up in Acrobat, just the jpg's come up blank in Explorer.)

Questions:
What is causing this, a setting in Explorer/Win7 or Excel?
Can I change Excel hyperlink default software to use something other than Explorer to display the jpg files?

View 5 Replies View Related

Sheet Tabs Disappear When Workbook Window Protected?

Nov 21, 2013

I have a workbook with multiple sheets. I would like to protect both the structure and window, but when I do this the sheet tabs are no longer visible when I reopen the workbook.

View 4 Replies View Related

Excel 2010 :: Close Second Workbook From Workbook BeforeClose?

May 27, 2014

I cannot make this work in XL2010.

I am opening a second workbook in ReadOnly in the Workbook Open and Closing it in the Workbook BeforeClose.

I don't EVER want to save changes on either workbook.

I need to leave excel open as the macro created a 3rd workbook which the user will need.

[Code]....

View 6 Replies View Related

Sheet Tabs Disappear When I Open Excel

Feb 10, 2010

my sheet tabs sometimes disappears when I open excel. I know you can go through the start button and the advanced option to display the sheet tabs. Is there code I can incorporate so that on the opening of the excel file after the splash screen runs its course, the sheet tabs are displayed.

View 9 Replies View Related

Excel 2010 :: Pull Value From One Workbook Into Another

Aug 6, 2014

Using Excel 2010. I have 2 worksheets, saved in same folder (if that matters).

Worksheet 1=Master_List.xlsx
Column1
Column2
Column3
Column4
PartNumber

1002
Sony
Playstation
4D
W74859

Worksheet 2=Sample_List.xlsx
Doesn't Matter
Doesn't Matter
Doesn't Matter
Doesn't Matter
Doesn't Matter
Column1
Column2
Column3
PartNumber

Doesn't Matter
Doesn't Matter
Doesn't Matter
Doesn't Matter
Doesn't Matter
1002
Sony
Playstation

Basically, I'm looking to populate the blank cells in the PartNumber column (Sample_List) by looking at the data in Column1, Column2, Column3 then going to the Master_List, matching up Column1, Column2, Column3. The PartNumber value in the row with the matching values would then be copied to the Sample_List.

View 4 Replies View Related

Excel 2010 :: Paste Link Chart From One Sheet Of Workbook To Another Sheet Of The Same Workbook

Jul 20, 2014

I've created a chart in sheet 1 in a workbook. I want to copy and paste that chart into another sheet (lets take sheet 2) of the same workbook. I am using Excel 2010 version.

Whenever, I try to copy a graph and want to do "Paste Special as Link picture". The problem I am facing as "Paste Link" option is inactive.

I am attaching the Excel for your reference.

View 2 Replies View Related

Excel 2010 :: Run Macro In Another Workbook Without Copying It?

May 21, 2014

I used the button in Excel 2010 to record a macro that allows me to format a workbook font and stuff because i do that many times a day for several workbooks. However I want to be able to just push a button and have all open workbooks run the macro I recorded.

I am able to make a button- thats easy, but how do I get it to run for ANY workbook? My problem is that apparently it only runs the workbook that is named a certain way. should i post the code here?

View 1 Replies View Related

Excel 2010 :: Unfilter Workbook Before Saving?

Feb 16, 2014

In order to unfilter a workbook before saving, that is often left by the users with filters on, I use the following code:

[Code].....

The code works just perfect for a workbook that has a table in a normal range of cells.

If I insert a table (using Office 2010 and later option), the code simply doesn't work.

View 5 Replies View Related

Excel 2010 :: Compare Two Spreadsheets In Same Workbook

Nov 17, 2011

How to compare two spreadsheets in the same workbook in Excel 2010.

View 4 Replies View Related

Excel 2010 :: Macro Does Not Exist In Workbook

May 8, 2013

We have recently converted to Office 2010 from 2007 I have now got a name conflict with some macros on my templates

I have some code which will open up the affected templates delete the required modules & import the amended modules, this is working OK.

I now have to re assign the new macro to each button on all pages on all my templates., I started of by recording the actions to achieve this (see part of the code), but unfortunately the recorded code will not work, it runs but when I test the buttons I get the message that "this macro does not exist in this work book".

Code:
Sheets("page 2").Select
ActiveSheet.Shapes.Range(Array("Button 255")).Select
Selection.OnAction = "DIAM01"
ActiveSheet.Shapes.Range(Array("Button 1549")).Select
Selection.OnAction = "DIAM02"

[Code] ...........

View 2 Replies View Related

Excel 2010 :: VBA - Select Last Sheet In Workbook?

Feb 19, 2014

Excel 2010

My macro cleans up data in worksheet "Chalkboard".

After cleanup, I'd like to copy data and select the last sheet in the workbook (the one on the far right) and paste the data.

The last worksheet changes monthly: Jan Feb Mar Apr, etc.... Meaning each month, I'll add a new worksheet for the given month.

I need code that will select the last worksheet in the workbook.

View 1 Replies View Related

Excel 2010 :: Save Workbook As XLTM?

May 17, 2014

Windows 8.1 Excel 2010, I open a Template, make some changes in the template then I want to save the modified template as a Template ".xltm" under a new name. I'm using the following code for the new workbook name (which works except for the file extension);

ActiveWorkbook.SaveAs Filename:=ChkLst_TEXT_path & Application.PathSeparator _
& "NewChkLsts" & Application.PathSeparator & ShtNm

By default it saves the workbook as ".xlsm". How can I get it to save it as ".xltm"?

View 1 Replies View Related

Excel 2010 :: View Same Workbook On Dual Monitors

Apr 9, 2014

I believe that someone showed me once that you could view the same workbook on two monitors with the vien arrange all mode, you could make changes on both screens and the changes would be saved to the same file similar to arranging two views. I cannot rememebr how to do this or even if it is possible.

View 5 Replies View Related

Excel 2010 :: Enable Sorting A-Z In Locked Workbook

Jun 19, 2014

I have a workbook with a tab for each day of the month. This workbook is placed in a shared file and used by various yards in different locations. A new yard beginning the process is refusing to use it because due to formulas we must lock the workbook (contains many formulas and a live clock macro to track trip time) and they cannot sort A-Z. The sheets are labeled 1,2,3,4,5,6,7,8,9 and so on to 31. I know that you can write a Macro to allow sorting, but I cannot get it to work. the users CANNOT know the password due to hidden revenue etc. and formulas.

View 6 Replies View Related

Excel 2010 :: How To Import A Color Scheme From Another Workbook

Mar 31, 2011

How do you import a color scheme from another workbook in Excel 2010? I could do it in previous versions....now I don't know what to do.

View 3 Replies View Related

Excel 2010 :: How To Combine Multiple Workbooks To New One Workbook

Jan 9, 2014

I have three workbooks. Every workbook has 50 persons IT information. Those are CPU list, Monitor list, UPS list. I would like to create another workbook. Where all user's IT information will be available. Like X user's information required, under x information his CPU, monitor and UPS information link will be available. How to create link of the CPU, UPS monitor sheets with new workbook?

View 4 Replies View Related

Excel 2010 :: VALUE Error When Workbook Updates On Startup

Nov 10, 2011

Using Excel 2010.

I have a formula in a workbook that links to another workbook and returns a #VALUE! error. The formula is:

=OFFSET(INDEX('\srvrdatakenny cantrell$Kenny''s FolderPayroll[DI Staff List.xls]Sheet1'!$D$6:$D$60,MATCH(TRUE,'\srvrdatakenny cantrell$Kenny''s FolderPayroll[DI Staff List.xls]Sheet1'!$D$6:$D$60=B3,0)),0,2)

However, when I open the source workbook, the cell updates correctly. How can I get the cell's formula to update when the source data workbook is closed?

View 3 Replies View Related

Excel 2010 :: Sharing Workbook Corrupts File

Nov 15, 2011

We have an Excel file that 20+ Users update daily. Every time we share the workbook, it corrupts the file within days.

We are using Excel 2010. We go to Review tab, Share Workbook, and check the Allow Changes box.

View 2 Replies View Related

Excel 2010 :: Workbook With Two Sheets / Query Parameters

Mar 6, 2012

I have a workbook that contains two sheets with two separate queries. On the first sheet I have two cells designated to accept the values for the parameters. The first sheet accepts the values and populates the table correctly. The second sheet doesn't seem to accept the values and just returns blank rows.

View 9 Replies View Related

Excel 2010 :: Update Values From And To Closed Workbook?

Mar 7, 2012

I am having a workbook (say a.xlsm) which has value entry fields and some values are given to another workbook (say b.xlsm) which has some sort of calculations and the result is projected back to the book a. most of the time book b will be closed. I am using Excel 2010.

I opened and saw that the result which is calculated and projected from workbook b is not getting updated. I opened the workbook b and saw that the values I have entered in a has not been updated in b. note that I am opening one book at a time and I do click on update links when I am asked.

View 1 Replies View Related

Excel 2010 :: Breaking Data Links To Another Workbook

Oct 18, 2012

I am running a macro-enabled Excel 2010 file, and there is a link to another workbook that pops up every time I open it asking if I want to update. I have searched formulas and pages, and can't find where it's linking from. I searched the VBA module I've been working in, and I can't find the link. When I click Data->Edit Links->Break Links and confirm, nothing happens. It still shows up as linked, and still prompts me to update next time I open it. I'd really like to get this data link severed.

View 3 Replies View Related

Excel 2010 :: Data Connection In Shared Workbook?

May 29, 2013

Im using Excel 2010 and have a data connection that I want to use. I added it to a regular workbook and it updates perfectly as-designed. However, I need this feature to work in a shared workbook, but it doesn't.

View 2 Replies View Related

Excel 2010 :: Find All The Data Tables In Workbook?

Aug 7, 2013

I am using Excel 2010. I am digging through a workbook with 80-some worksheets. There is one worksheet with 11 data tables. When the workbook refreshes, there is a note at the bottom saying something about 21 data tables. I am not sure where the other 10 are. In an online post, someone said that the Name Manager should show them. But in Name Manager, when I filter on Tables, the list goes blank, and all the icons are the same for the other named ranges. Is there another way to find the data tables?

View 9 Replies View Related

Excel 2010 :: Accessing VBA Module From UserForm On Workbook Open

Feb 13, 2013

I am using Excel 2010 and late binding to generate reports. The sheets are blank and unused. I have the UserForm being opened on Workbook_Open and the actual VBA for doing the work in a separate macro in the workbook. All the posts I have found are dealing with accessing cells from the UserForm and I haven't found any dealing with connecting a macro to the UserForm output.

My question is this: I want to return from the UserForm the flags of which reports to run to the (unopened) macro containing the code to do so. How do I open the macro and pass the variables to it?

The UserForm is creatively called "SelectionForm" and the macro is called "DailyFTP" with a Main sub as the entry. I know I can use the code under to capture the radio button and checkbox choices. I have other variables like the names of files set as global variables in the DailyFTP macro. The macro doesn't exist until SelectionForm opens it, so they must be set after the macro is in memory.

View 6 Replies View Related

Excel 2010 :: How To Reset Workbook Default Format To General

Jan 25, 2011

Using Excel 2010 - I have a large workbook with multiple worksheets - been using it succesfully every day for a long time. All of a sudden every empty cell, and any cell not specifically formated in every worksheet has a default cell format of Time. Any new workbook created is OK.. defaults to 'General' - But, if I add a new blank worksheet to this particular workbook it defaults to 'Time' format. How did the default cell format for this workbook become set to 'Time' from 'General' and how do i fix it?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved