Excel 2010 :: Find All The Data Tables In Workbook?
Aug 7, 2013
I am using Excel 2010. I am digging through a workbook with 80-some worksheets. There is one worksheet with 11 data tables. When the workbook refreshes, there is a note at the bottom saying something about 21 data tables. I am not sure where the other 10 are. In an online post, someone said that the Name Manager should show them. But in Name Manager, when I filter on Tables, the list goes blank, and all the icons are the same for the other named ranges. Is there another way to find the data tables?
View 9 Replies
ADVERTISEMENT
Jul 1, 2013
Using Excel 2010. I'm writing a macro that sets up a workbook to be used for estimating at the beginning of a project. In the code I need to create multiple tables (formerly known as "lists") in the workbook. Then later in the code I need to refer back to those newly created tables. Currently, the code that creates the table is part of a loop that creates the table on many different worksheets. The problem of course, is that I have to name the Table, and then it won't create a table of the same name on the next sheet. Then, later in the code, I need to make adjustments to the table that was just created before looping to the next sheet.
Is there a way to create a table without giving it a constant name? Or by giving it a name that builds off of other info in the sheet? For example, I would be good with the naming the table after the sheet name: "Sheet1_Table" or such.
Code:
Sub Auto_Open()
'
Dim sht As Worksheet
If Range("A1") = 1 Then
[Code].....
View 2 Replies
View Related
Sep 13, 2013
I'm trying to create some vba code that will go into other .xlsx documents, pull all cells with a value in the first 30 columns and then return them as a table. Basically each work crew has a .xlsx spreadsheet containing their schedule and I am trying to bring them all together into one nice little package. If I go to import from external sources then click XML data, navigate to the folder they are in and them click show all files and pick my spreadsheet it imports nicely. Then I go to the next blank cell in column "A" and repeat for the 4 crews. Now I can filter by each crew but all 4 are visible on a single page as a table. I recorded a macro that shows everything I did, but it is not dynamic (the .xlsx source files name changes based on the month) I'm running XP sp3 with Excel 2010
Here is a copy of what I have
Code:
With ActiveSheet.ListObjects.Add(SourceType:=0, Source:=Array( _
"OLEDB;Provider=Microsoft.ACE.OLEDB.12.0;Password="""";User ID=Admin;Data Source=C:Documents and SettingsUSERNAMEDesktopSCHEDULE STUF" _
, _
"FAcrewCurrent.xlsx;Mode=Share Deny Write;Extended Properties=""HDR=YES;"";Jet OLEDB:System database="""";Jet OLEDB:Registry Path=""""" _
, _
";Jet OLEDB:Database Password="""";Jet OLEDB:Engine Type=37;Jet OLEDB:Database Locking Mode=0;Jet OLEDB:Global Partial Bulk Ops=2;J" _
, _
"et OLEDB:Global Bulk Transactions=1;Jet OLEDB:New Database Password="""";Jet OLEDB:Create System Database=False;Jet OLEDB:Encrypt " _
[code].....
Is there a better or simpler way to do this? The tables don't need to be forever linked to their previous spreadsheets so if copy/pasting is a better way than I am all for that as well.
View 1 Replies
View Related
Jun 27, 2012
I've been trying to create pivot table in excel 2010. Unfortunately I've been getting this message "Data source reference is not valid"?
View 2 Replies
View Related
Apr 11, 2013
Is there any way to use slicers on a table in 2010? I've seen posts that it is available in 2013, but can't find find a definitive answer on if there is a way to get it to work in 2010.
View 5 Replies
View Related
Oct 31, 2012
I have Table1 in sheet1 and Table2 in sheet2 of same Excel Workbook. The contents ( Data in columns B, C, D, E and F) of Sheet1 Assets are to be verified with respect to the contents ( Data in columns B, C, D, E and F) of the same Asset in Sheet2. If the all contents (of all columns) are matching, it should return Boolean value (True) in column G of the sheet1 or else Boolean value (False).
I am using Excel 2010 version and I do not have Power Pivot menu.
Table1:
Excel 2010
A
B
C
D
E
F
1
Asset
Prevention
Control
Detection
Mitigation
Escape, Evacuation & Rescue
[Code] .........
Table2:
Excel 2010
A
B
C
D
E
F
1
Asset
Prevention
Control
Detection
Mitigation
Escape, Evacuation & Rescue
2
U1101JBM
Y
Y
Y
[Code] .....
View 4 Replies
View Related
Jan 27, 2014
Code:
tblCluster
Jan-14 Feb-14 Mar-14
Salary 10,000 20,000 30,000
Jan-14
Feb-14
Salary 30,000
I have a table above (in red), as an example, my actual table goes out 60 months.
Where the Green Value is, I need a formula that will reference the two months above it (They could be any of the 60 months), that will then sum the salary from the table between the selected two months (including these months)
I have tried,
Code:
=SUMIFS(C6:BJ6,
tblCluster[[#Headers],[Jan-14]:[Dec-18]],">="&'Cluster Analysis'!$I$51,
tblCluster[[#Headers],[Jan-14]:[Dec-18]],"
View 2 Replies
View Related
Oct 18, 2012
I am running a macro-enabled Excel 2010 file, and there is a link to another workbook that pops up every time I open it asking if I want to update. I have searched formulas and pages, and can't find where it's linking from. I searched the VBA module I've been working in, and I can't find the link. When I click Data->Edit Links->Break Links and confirm, nothing happens. It still shows up as linked, and still prompts me to update next time I open it. I'd really like to get this data link severed.
View 3 Replies
View Related
May 29, 2013
Im using Excel 2010 and have a data connection that I want to use. I added it to a regular workbook and it updates perfectly as-designed. However, I need this feature to work in a shared workbook, but it doesn't.
View 2 Replies
View Related
Oct 24, 2013
I have a pivot table below: Excel 2010. All of the information within it is text, not numbers, as illustrated below as well.
Below is what I have now....
Column A, Row 1 = Red
Column B, Row 1 = Blue
Column B, Row 2 = Yellow
Column C, Row 1 = Green
Column C, Row 2 = Green
What I want it to look like is below, removing the second word "green" from column C.
Column A, Row 1 = Red
Column B, Row 1 = Blue
Column B, Row 2 = Yellow
Column C, Row 1 = Green
Is there a way to do this and do it automatically? If I was doing this in a regular excel sheet, I would have a merged cell in column C, rows 1 & 2.
View 2 Replies
View Related
Jan 4, 2014
I have a table that contains all my data and would like to filter it by company into their own tables that will stay up to date with the main table and then hopefully somehow calculate their investment returns (future stage). I thought Microsoft Query would work but I came across a problem see my other post MS Query returning data to excel some columns I cant sum looks like text
Excel 2010
View 1 Replies
View Related
Jan 23, 2014
I have to dig out data for all employees first entry and last exit for two months. My raw data is in sheet 1 as under:
LAST_NAME
FIRST_NAME
EMPLOYEE
[Code]...
I am using excel 2010
View 8 Replies
View Related
Dec 1, 2011
I have two workbooks I am using. Essentially I am copying values out of one workbook, opening a second workbook, manipulating data and pasting it. Everything is working great but one issue! The first workbook has named ranges in it that I don't want in the second workbook (just values). I don't want them because when I try this operation the second time it asks if I want to use the same name or choose a different name. For some reason it is still copying over all the named ranges (all 343 of them!). Is there a way to not allow it to do that or simply just delete the names before I close the second workbook?
Win 7 64, Office 2010
Sub CopytoDB()
Application.ScreenUpdating = False
Worksheets("Setup").Select
Range("A2:A766").Select
Selection.Copy
Workbooks.Open Filename:="D:Server MirrorDatabaseSetup Database.xlsm"
Worksheets("Database").Select
Columns("E:E").Select
Selection.Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove
[code].....
View 1 Replies
View Related
Jul 9, 2012
I got a master format in xl2010 to collect data, which is being circulated between my team. members fill in their respective data n mail back the file with their name attached to file name. i want to creat a macro which can copy the data from every members file to master file.
View 1 Replies
View Related
Apr 24, 2014
I'm trying to create a macro that will look at each worksheet in a workbook and then delete the last line of data on each worksheet. The last row can vary on each worksheet. This is what I have come up with but it is not working. I am on Excel 2010 and Windows 7.
Sub Macro1()
Macro1 Macro
Dim ws As Worksheet
[Code]....
View 2 Replies
View Related
Jun 5, 2014
I am trying to take multiple tables from a Word document and import them into an Excel worksheet. Currently I have found two versions that when combined, could yield what I am looking for. The first one imports the table's data from Word, but does not maintain formatting of the table (font, colors, rows/columns etc.):
The next code maintains formatting, but only imports/pastes one table:
[Code] .........
For the second one, I do not like the fact that it is calling a specific Workbook to paste into. If I could somehow maintain the ability to import/past multiple tables while keeping formatting that would be perfect. An extra bonus would be to import each table within the Word document into individual Worksheets in Excel. I am also using Office 2010.
References: [URL] .........
VBA - How to preserve source formatting while copying data from word table to excel sheet using VB macro? - Stack Overflow
View 14 Replies
View Related
Nov 13, 2013
SUMIFS with less than & more than
I found this thread which works for normal ranges
I want to Sum for Values Greater than a specific date in my formula.
This first one works for a specific date (Relevant reference in red), so say 01/01/2014
Code:
=SUMIFS(Table2[[#All],[Basic]],
Table2[[#All],[Cluster]],Table3[[#Headers],[Company]],
Table2[[#All],[Start Date]],Table3[#Headers],
Table2[[#All],[Perm / Temp / Prof / ETA]],[@Company])
Code:
To Sum for ranges >= 01/01/2014, I have tried this below based on the thread above but Excel does not accept this.
=SUMIFS(Table2[[#All],[Basic]],
Table2[[#All],[Cluster]],Table3[[#Headers],[Company]],
">="Table2[[#All],[Start Date]],Table3[#Headers],
Table2[[#All],[Perm / Temp / Prof / ETA]],[@Company])
View 4 Replies
View Related
Feb 25, 2014
I'm running Microsoft Office 2007.
I have 2 separate tables.. both a list of contacts of sorts.
In one table I have a list of all my clients (table A), in the other I have a list of "preferred" clients (table B).
The contact details etc that are stored in table A are more comprehensive to those in table B.
Effectively, I want to search for all of my preferred contacts from table B and filter for them in table A.
Then ideally I will sort alphabetically and just cut and paste the details into my preferred client spreadsheet.
I had a look online and there was something about creating a "relationship" but I don't think excel 2007 allowed me to do it. I certainly hadn't heard of powerview or powerpivot that they were using!
View 6 Replies
View Related
May 27, 2014
I cannot make this work in XL2010.
I am opening a second workbook in ReadOnly in the Workbook Open and Closing it in the Workbook BeforeClose.
I don't EVER want to save changes on either workbook.
I need to leave excel open as the macro created a 3rd workbook which the user will need.
[Code]....
View 6 Replies
View Related
Nov 12, 2011
I am trying to use the code that can find the last used row in particular column.
Here is the code in module1
Code:
Function LastRow(rng As Range)
Dim temp, temp1
Dim col As Range
With Application.Caller.Parent
For Each col In rng.Columns
temp = Cells(Rows.Count, rng.Column).End(xlUp).Row
If temp > temp1 Then temp1 = temp
Next col
End With
LastRow = temp1
End Function
and code in the range
Code:
=LastRow(V12:V300)
My problem is, this code was working nicely but now it only shows ###.
PS I use MS office 2010
View 9 Replies
View Related
May 5, 2012
I'm looking for one function for each of these properties that will provide them with negligible overhead in all or almost all spreadsheet data cases, such as the normal spreadsheets, autofiltered data, large workbooks, etc.
By the way, by "first row", I mean the first row after the header row, given that the header row is in row 1.
View 7 Replies
View Related
Jul 23, 2014
I am using Excel 2010 and I am currently trying to find the Avg Min / Avg Max costs for 4 different groups.. Players, Accompanying, Coaches, Medical.
I need it to get the minimum values from 3 different sections ( I am using custom names for them such as PlayerReg for Player Registration costs ) once it gathers the minimum / maximum values from the 3 different sections it needs to add them together to display the Avg Minimum / Maximum for each group.
At the moment I have =MIN(Total_Discount_7_Nights + PlayerReg + FrequentFlierFare) under Minimum /w Frequent Flier although the minimum value it should detect is $948.75 it displays $1115.
For maximum I have
=MAX(Total_Discount_7_Nights + PlayerReg + FrequentFlierFare) under Maximum /w Frequent Flier although once again this value should be $1174.50
Although for some reason it displays $978.75 - which is the minimum cost. The Maximum figures for the other groups (Accompanying, Coaches and Medical) don't even display values Instead it just has #VALUE! in which I'm guessing I have something wrong with it.
View 2 Replies
View Related
Aug 6, 2014
Using Excel 2010. I have 2 worksheets, saved in same folder (if that matters).
Worksheet 1=Master_List.xlsx
Column1
Column2
Column3
Column4
PartNumber
1002
Sony
Playstation
4D
W74859
Worksheet 2=Sample_List.xlsx
Doesn't Matter
Doesn't Matter
Doesn't Matter
Doesn't Matter
Doesn't Matter
Column1
Column2
Column3
PartNumber
Doesn't Matter
Doesn't Matter
Doesn't Matter
Doesn't Matter
Doesn't Matter
1002
Sony
Playstation
Basically, I'm looking to populate the blank cells in the PartNumber column (Sample_List) by looking at the data in Column1, Column2, Column3 then going to the Master_List, matching up Column1, Column2, Column3. The PartNumber value in the row with the matching values would then be copied to the Sample_List.
View 4 Replies
View Related
Dec 14, 2012
Excel 2010. I have two very large tables of data:
Table 1 is a long list of unique items in no particular order, each of which belongs to a unique group of items, for example:
ItemsGroup ID
apple
pear
grape
fig
banana
guava
peach
mango
Table 2 lists all the Group ID numbers and in the same row as each Group ID number, shows the names of all the items belonging to that group, one item in each column. Different Groups have different numbers of items in them. For example:
Group IDItem1 Item2 Item3 etc.
214applepeargrape
33fig
7bananaguava
59peachmango
Is there a formula I can use in the second column of Table 1 to look for each item in Table 2 and tell me what group it is in? For example for "apple" or "pear" or "grape" it would look in Table 2 and return the Group ID number "214".
View 4 Replies
View Related
Feb 15, 2012
I have Excel 2010, and a dual monitor setup, with the left monitor being the main one. I have my spreadsheets on the right monitor.
When I open a Find and Replace, the dialog box always goes to monitor #1 (left); I want it on monitor #2.
Is there a way to default it to the "right" monitor?
View 3 Replies
View Related
May 29, 2012
In Excel 2010, I have a list of numbers with about 7000 rows. I am trying to track the number of times the number "22" appears within 30-day periods, with the end-result being a "count column".
While I could enter a formula manually for the date ranges, there are over 200 time-spans I'd have to enter (list goes back to year 1994). Is there a way to automate this process...
Excel 2010ABCDE1DateNumbers List# of Days AgoCount for number
22205/31/12304305/30/12602405/29/12909505/28/12301202605/27/12391505705/26/12371807805/25/1222210
11905/24/123824051005/23/122227091105/22/123230011205/21/123533001305/20/12383608
[Code] .........
View 1 Replies
View Related
Sep 13, 2013
What is the formula for Excel 2010 if I have a text in a cell:
CM/62 Charge MTS/7/5/2013 000
CM/72 Non-Cash Adj MSC/7/3/2013 A15
CM/1542 Charge ADM/6/24/2013 S28
CM/63610 Charge MIS/7/5/2013
CM/527 Non-Cash Adj MSC/7/8/2013 S
CM/1542 Charge ADM/6/24/2013 S2
CM/5623 Charge LTE/7/24/2013 000
CM/1610 Rentup MAF/7/1/2013 S21
I need to get the result for word: MTS, MSC, ADM, LTE, MAF
View 6 Replies
View Related
Dec 12, 2013
In an Excel Pro Plus 2010 workbook on a Windows 7 PC, trying to use the "After" argument in a VBA .Find function and it's not working as expected.
I've got the following data in column D:
Row1: Title
Row2: Row2Data
Row3: Row3Data
And using this simple procedure:
Sub FindTest()
If Range("D:D").Find("Title", After:=Range("D1")) Is Nothing Then
Debug.Print "Not Found"
Else
Debug.Print Range("D:D").Find("Title", After:=Range("D1")).Row
End If
End Sub
My expecation is that "Not Found"will be returned, but instead I'm getting the row # (1).
If I change the value in D1 the procudure returns "Not Found", as expected.
If I change the find argument to look for "Row2Data" it returns 2.
I also tried changing the "After" argument to "D2" ... same result.
Finally, I tried using this format: "Range("D:D").Find("Title", [D2])" and got the same result.
View 2 Replies
View Related
Jul 20, 2014
I've created a chart in sheet 1 in a workbook. I want to copy and paste that chart into another sheet (lets take sheet 2) of the same workbook. I am using Excel 2010 version.
Whenever, I try to copy a graph and want to do "Paste Special as Link picture". The problem I am facing as "Paste Link" option is inactive.
I am attaching the Excel for your reference.
View 2 Replies
View Related
Mar 22, 2013
how to do this, but I know it can be done.... I want to use one drop down list created via the Data Validation 'List' Criteria to then lookup data based on the selection made in this list...... this will require a number of reiterations to get to the final result......
So:
Drop Down No:
1. List: Department Function:
2. List: Sub Function List Based on Selection from 1.
3. List: Job Code, Title and Pay Grade based on Selection from step 2
how to ensure that we are able to minimise the overall workbook size due to the complexity that is required here as this is just the basics.... this will need to applicable further once this basic requirement has been fulfilled.
View 9 Replies
View Related
