Using 2010 - When I paste a chart I can initially retain the format of chart bar colours (Paste Special - source formatting). But when I select a new data source for the chart the formatting of the colours is not retained.
View 1 RepliesI work with a team of users that are continually publishing reports in Word that contain charts and graphs copy and pasted from Excel into Word 2010.
We have a custom script that leverages a PDF engine to automatically convert .doc files to .PDF files that we distribute electronically to our clients. This all works great, but only if all my users select 'paste special' and Enhanced Metafile Format when adding their excel charts into our reports. Most of these people aren't tech savvy, and I'm havin ga hell of a time getting them to follow this workflow and am hoping there's a way in Office 2010 to select the default paste from excel into word when the content is a chart.
It seems like the default paste from excel is an embedded chart/graph that you can then further manipulate each component of the chart in Word; the default doesnt' paste an actual image. I am assuming the pdf renderer is using a lower resolution .PNG version of the image and when these are scaled for print and or pdf, they look like crap.
Is htere anyway I can automatically change the default paste format for the chart from excel into word to be an EMF/EMV (enhanced metafile?) Either thorugh the registry or some other saveable setting?
How do I paste the first chart into the second chart but maintain the format of the second chart?
View 2 Replies View RelatedExcel 2010. I have a workbook that has multiple sheets where some have headers and others do not. Some sheets are static in that no user input is required and others are dynamic so the toal number of pages per worksheet may vary based on how much information the user inputs.
An example:
Sheet 1 is static and requires no input, it does not have a header or a page number. For compliance reasons this sheet must be printed on top of all the other sheets in this policy
Sheet 2 is dynamic. This sheet can range from 2 pages to 5 pages depending on user input. This sheet must have page numbers starting with 1 and it must have a header on page 2 through the last page, but no header on page 1.
I am currently using a worksheet_activate sub to input data into the headers and footers of sheet 2. This works very well and puts the data where I want it to go just by using the "Different First Page" option in the headers design tab.
The problem arises when I select both sheets to print. Excel now thinks Sheet1 is the first page, so the first page of sheet 2 now has a header and the page number beings at 2 instead of 1.
Where I can stop this from happening?
Current sub:
Code:
Private Sub Worksheet_Activate()
' If WS is activated, place information in header
Application.ScreenUpdating = False
'Policy #
[Code] ..........
As I said, this works all well and good for when I'm just printing Sheet2 but when I have to print Sheet 1 & 2 together, it no longer prints the way it should. There are times when Sheet 2 will be the first page of the overall document but there are a few instances where it will be second to Sheet 1 and I run into this issue. Is there a way to specifically reference which headers/footers the code will input the data?
I have a powerpoint presentation which has a bunch of Excel charts embedded as Microsoft Office Graphic Objects, but I don't have access to the source data (plus the links are broken).
how to get the underlying data. I vaguely recall once doing this with some vba that I had found somewhere the net, but I don't have the code anymore.
I have some code that works within Excel however:
Code:
Sub GetChartValues()
' this macro will recover the data from a disconnected Microsoft Graphic Object (such as we used to paste
' into PowerPoint). You will need to insert a Worksheet entitled "ChartData" to store the values.
Dim NumberOfRows As Integer
[code].....
how to make this code work in PowerPoint?
I want to use a macro to change attributes of a series in a chart. Unbelievably, if the series has been pasted into the chart from another chart, and although the macro can address the series and even return values (eg name) correctly, the selection simply cycles to one of the original series on the chart.
View 3 Replies View RelatedI am looking for a creative way to display a pie chart within a data point marker of a line chart.
My database has 3 value columns, Type1, Type2 and the Total (Type1 + Type2)
these are recorded per day (Date, in Column A)
I have a line chart that displays the total by date, but I want to find a way to display the percentage split of a particular day by type.
I was thinking to load the chart image into the Data point marker, but i don't think that is the best way as the data is updated daily and I would have to do it each day for a few line charts.
The other way I was thinking about was to have a generic Pie chat in the Line chart (Maybe in a corner) and the pie would update depending on way date series was selected or Mouseover'd)
the way that I am approaching it at the movement (Not the best way and by far not the coolest way. Is to have a list of all the dates in a column next to the Line chart and using some VBA, what ever date is selected in the column the pie chart displays the corresponding data. But eh challenge is that when there is alot of dates, I am going to be scrolling up and down.
I am using Excel 2010, but I cant not use the slicer's as the other users do not have 2010, they have 2007.
I have a problem where i am just trying to do a simple copy of dates from one spreadsheet to another
18/03/2008 00:00 however when the its copied to the other spreassheet is changes to the US date formate 3/18/2008 0:00 I need to keep the format as date as the date needs to be the current day. How do i get this to remain UK
I have an Excel 2010 spreadsheet where the default number format keeps switching to the date format. I keep switching it back and it'll stay as a number format for a time, but then it'll switch back. This is also the case for any new worksheets in that one spreadsheet.
This only happens with this one file - everything else behaves according to my regional settings or to how the file had been previously formatted.
I have a thoroughly outdated system to keep a log of call centre stats. In order to facilitate a marginally easier workflow, I have rearranged a few things so that a user simply has to copy and paste data from reports into the worksheet.
The worksheet is set up with all the number formats like time and percentage which are extremely important in totaling and averaging hours and availabilities, however the pasted data doesn't match the destination format and it therefore affects the total.
I have tried many different special pasting options to no avail.
The only way i seem to be able to do it is to go into each line and retype my percentages (as 100 becomes 10000% ) and click the tick next to the formula bar so 00:00:16 is calculated as a quantity of time instead of text. With 30 people and 15 stats each day that exercise becomes a little bit tedious and counterproductive.
i have put a small extract from list of 50000 values. I have Figures which are pasted as values on top and on A column but they do not agree unless i F2+enter on each figure on Column A that would mean 50000+ enteries.. i have tried copying column A and row 1 and pasting it as value but still no change. Row 1 header figures are typed manually.
View 2 Replies View RelatedI'm currently using some pretty extensive conditional formatting macros on a worksheet (this functionality is working fine when data is directly entered into the sheet). But when i paste data from another worksheet into my "formatted" sheet, the formatting does not take affect. is there any way to "refresh" a macro?
View 2 Replies View Relatedhow do i make a bar chart on Excel! 2010
Basically i have these figures
Male : 21
Female : 18
I want to make a bar chart, When i use Excel and try to make it - i get a chart which shows the right column height but the Male and Female bars are BOTH IN 1 Colour. How do i make it so that male bar is blue and female is pink.
I would like to plot the 1st dynamic line chart as shown in [URL] ..... but i never write any excel macro 2010 before, any sample of this?
View 4 Replies View RelatedIm looking to create a bar chart in Excel 2010 where the totalnumber of widgets is 33 and the number produced so far is 11. The bar chart would be a single bar that represents the percentage complete (33%) with the chart maximum range being 100% which would represent the number 38.
Ive included a mock up example of what the data and chart would look like
I have a chart with 20 series labels that are series 1, series 2.... etc. I want to label them with 20 corresponding cells but can't find how to do this in Excel 2010 (I seem to remember this being easy to do in older versions). At the moment I am having to click on source data and edit each label individually... Is there a quicker way?
View 2 Replies View RelatedHow do I put a title on my chart, I'm using 2010 excel for mac.
View 2 Replies View RelatedI need to detect when some Chart is being deleted. This is part of an XL2010 VSTO addin I an developping. I could not find any event matching my need.
Did I miss some event somewhere? Would you know a (simple) method to detect when some Chart is being deleted by the user?
I make a bar chart from series of data from cells.
The data consist of values that regarding of students achievment in a test. On the cell if the value is 56.67 and on the data label is shown 56.67.
When the cell value is 50.00, which then I've change the format of the cell to custom format to 0.00;; so it only show 50 but on the data label of the chart it will show 50.
Even after I change the format of the data label it will still show '.' At the of the value.
How to hide the '.' On the data label if the decimals value is .00?
I'm using MS Excel 2010
I am creating a chart with more than 2000 dates (each day). How can I format the axis so it only displays the 1st day of each quarter (01/01/2010, 01/04/2010, 01/07/2010...).
At the moment I cannot format the axis and minor/major units remain numbers.
I am using Excel 2010 and European date format.
I'm working on a criteria matrix in Excel 2010 that automatically plots a single member in a Scatter Chart based on the two values. There are 4 suppliers listed in Column D starting in cell D4 thru D7. The "x" value is listed in Column E starting in cell E4 thru E7. The "y" value is listed in Column F starting in cell F4 thru F7.
The scatter chart will plot the points correctly, however, there are two issues: 1) If I try to insert a data label using the "Series Name," or in this case, the supplier's name, it will lists ALL of the suppliers Column D. It will not list the single supplier listed in cell D4. 2) The scatter chart appears with gridlines as a 4x4 matrix with a total of 16 cells. The "x" and "y" axis both start at 0 and go to 4. I can shade the entire chart one color. However, I want to shade some of the cells with darker and lighter shades.
I have 6 columns. The 5th and 6th columns are the most important. The 5th contains a figure and the 6th contains a type.
Bascially I am trying to do a basic chart showing the following 2 things. A. Do a percentage chart of column 6 (service) but not of percentage of hoem many lines the product is in. Not based on percentage of how many times Apples are shown compared to other products. I need it to add up everything, then do a percentage of total amounts of oranges and total of for Apples from the figures on column 5. Also, if possible, the pie chart will even show teh actual total figure per product in each (or next to) each pie chart slice.
know the easiest way to do this (step by step) in Excel 2010 and then I can perhaps write a macro for the future?
Why the recorded code doesn't work? I recorded the code below to format the Y-axis values of a chart with the recorder.
Code:
ActiveChart.Axes(xlValue).Select
With Selection.Format.TextFrame2.TextRange.Font
.NameComplexScript = "Arial"
[Code].....
I want to a horizontal line in a chart. There are only two figures with me. One I want to display as a column chart. The other as a horizontal line chart. (I can use both excel 2003 or 2010, whichever is suitable)
View 2 Replies View RelatedExcel 2010 how to not chart zero values in a Pivot Chart?
View 1 Replies View RelatedCan Pivot Table chart add another data from another sheet? I attached the link for this file (Add data1), it is because the file consists of several sheets and I do not know how to show here.
I would like to add the data from the "Rate" sheet into the Pivot Table chart (Chart.PT). I made an example by using normal way (Chart.Case (9)), the column series in the chart is the one I added from the "Rate" sheet. I wonder if I could do the same in pivot table chart.
I have excel 2010....
I am having problems creating a chart off of the following data. Each of the cells which have a numerical value are v-lookuping from another sheet. It needs to remain this way as when I switch brands (through data validation), the numbers will update and the chart should as well. Right now, the chart shows these values as zero. I have done this a million times in excel 2007, but now with 2010, I keep having this problem
2010/Jul
2010/Aug
2010/Sep
[Code].....
I was recently upgraded from Excel 2003 to 2010. I have some code that creates a 3d clustered bar chart, previously the chart's rotation was 0 and now it seems like Excel wants it to default to 15 degrees. I'd like to change the rotation back to zero, but Excel doesn't seem to see the chart.
I recorded a macro, inserted the relevant recorded code in my routine, but Excel doesn't seem to like it.
' begin code ------------------------------------------------
Dim Rng As Range
Dim cTyp As XlChartType
Set Rng = Range(Cells(2, 1), Cells(11, 2))
cTyp = xl3DBarClustered
Charts.Add
[Code] ....
I'm getting a Visual Basic error that says "Run-time error '-2147024809 (80070057)': The item with the specified name wasn't found."
Excel seems to know the chart name, but doesn't seem to think there are any shapes (initially, a loop looking at the names of shapes in the shapes collection returned nothing; printing ActiveSheet.Shapes.Count returns zero.)
What is the correct method of rotating a 3d clustered bar chart?
Scatter chart on excel 2010
My X axis range is small 1 to 4. but I want to show minor grid lines at 0.5, 1.5, 2.5, and 3.5 only. I do not want lines at 1, 2, 3 or 4. I am not sure how to achieve this. as switching on minor grid lines, included those at the integers as well as at the half way points.
Using Excel 2010. I have a Column Chart that shows 3 data series by month for one year
How can I customize the chart to group the data series on the X-Axis and repeat the 12 month series 3 times on one chart with one X-Axis to show each data series as a group?