Excel 2010 :: Values (from VLookup) Not Showing Up In Chart
Oct 22, 2012
I have excel 2010....
I am having problems creating a chart off of the following data. Each of the cells which have a numerical value are v-lookuping from another sheet. It needs to remain this way as when I switch brands (through data validation), the numbers will update and the chart should as well. Right now, the chart shows these values as zero. I have done this a million times in excel 2007, but now with 2010, I keep having this problem
When I update a cell (change A1 from 2 to 3), any cell that references that cell correctly changes its value (B1 = 2*A1). However, the screen will show the new value in B1 (6) over the previous value (4). At first I thought it almost looked like a strike-through, but then I realized the old value and new value were simply stacked in B1.
If I scroll the screen away that cell and go back to it, the correct value will now show without the stacked values. I'm not having this issue in any other program (Open Office), and I don't seem to be having any kind of stacking issue in any other Microsoft program.
I am trying to create a chart that would show all of the Amount values for each Size value that is in the example data below. The Size column has fixed values. In my example the values are: .5, 1, 2, 5, 8, 13 and 21. The Amount column data is variable. Any of the static Size values can be associated with many Amount values. I was attempting to have the static Size values on the X (horizontal) axis and the Amount values on the Y (vertical) axis. I would like to have all of the Amount values for each Size value be shown directly above the corresponding size value, in one vertical line. See example below.
I an creating this type of chart in Excel 2010.
Note, I am still new to this forum and don't know how to post pictures or Excel data into my posts. I am also using dots (periods) to provide separation in my examples.
I am working with an Excel 2010 workbook that has two worksheets in it. What I am trying to accomplish is I want the second worksheet to scan the first worksheet for a student's name, and count all of the instances that the student has a score less than a certain threshold (we'll say "5" for this example). I have tried using various combinations of vlookup and countif functions, but have not had much success. I did get it to a point where it worked, but only for the first instance of that student's name; it wouldn't continue searching the first worksheet for any other instances.
I have attached a sample workbook as a reference : Sheet1.xlsx
I have a spreadsheet (Excel 2010). I want to fill categoryid in Sheet One based on values of Skill and State which are part of field in Sheet two.
Sheet One (Has Four Columns and I am looking for filling CategoryID based on Sheet Two FirstName LastName Skill State CategoryID John Edward Ballet California Ed Catalino Tap London Natasha Curtis Ballet Australia Shen Watson Modern Kansas
I made a chart to show performance above and below average for sales teams.
When team is selected with no salesperson, value should be 0.
Employee selected and will show there week by week trends above or below. Seemed like a good idea.But the zeros (team level) are being displayed as plus or minus bars which isn't right and the labels show "0".
I find the pivot table is actually showing strange values if you click in the cell even though it displays a 0.Notations positive or negative like 3.80647894157197E-16.
The underlying data is an average formula and selecting invidual criteria, I show there are no anomalies.
I'm trying to do a line chart showing two teams and their cumulative scores over the period of a game. I've attached a sample with mock data. Is it possible to change the x-series of the charts to display custom time intervals like 0 min 1 min, 2 min, 3 min, 4 min, etc? Currently the x-series only has labels for each specific time there was a change in value. I've tried to change the scale but the options that I want aren't there.
My problem is this: I use Excel 2010 and have Pivot Tables that are using a Data Connection which is being built (and rebuilt) with VBA. The Pivot Table field is calculating a field that contains an integer value. The Pivot Table field filter properly displays this value.
However, the Pivot Table itself calculated Sum field only displays 0 (aka zero). Other fields that are exactly the same as this one are displaying properly.
My data connection is built as follows:
Code:
ThisWorkbook.Connections.Add "ChartQuery", "", "OLEDB;Persist Security Info=0;DSN=Excel Files; DBQ=" & wbFullName & _ ";DefaultDir=" & wbPath & ";DriverId=1046;MaxBufferSize=1024;PageTimeout=5; BackgroundQuery:=False", sSQL, 2 (And yes, my sSQL is sound, there are no typos, no special character issues)
The filter in the Pivot Table shows my value (for example, 14) however it always only displays a zero
My Pivot Table is formatting the field (like the others just like it) as a Number, two decimals My Pivot Table data source is ChartQuery
The worksheet this is pulling from is also set to use Number format for the entire column, but changing that doesn't make any difference even on the other fields that are working.
I'm using 2010. When I highlight rows or columns and select Group, the show (+) / hide (-) buttons would appear in the next to or above the header rows/columns.
The file I am working on is not showing these buttons. If I go to the Data tab & click "hide detail" or "show detail", it will hide my grouping if I'm in one of the cells of the grouping.
I can easily hide/unhide, but would rather group & click rather than highlight rows/columns.
I am looking for a creative way to display a pie chart within a data point marker of a line chart.
My database has 3 value columns, Type1, Type2 and the Total (Type1 + Type2) these are recorded per day (Date, in Column A)
I have a line chart that displays the total by date, but I want to find a way to display the percentage split of a particular day by type.
I was thinking to load the chart image into the Data point marker, but i don't think that is the best way as the data is updated daily and I would have to do it each day for a few line charts.
The other way I was thinking about was to have a generic Pie chat in the Line chart (Maybe in a corner) and the pie would update depending on way date series was selected or Mouseover'd)
the way that I am approaching it at the movement (Not the best way and by far not the coolest way. Is to have a list of all the dates in a column next to the Line chart and using some VBA, what ever date is selected in the column the pie chart displays the corresponding data. But eh challenge is that when there is alot of dates, I am going to be scrolling up and down.
I am using Excel 2010, but I cant not use the slicer's as the other users do not have 2010, they have 2007.
I'm currently using Excel 2010. Before, when ctrl+v'ing a cell that wasn't a number (but was, for example, a function), I could immediately after press ctrl, bring up a paste menu, and press v to paste as a value.
So before, if I had a range of cells that were functions (say something simple like "=D3/E3" on F3 and dragged down), I could do the following to paste the range into another worksheet:
1. Ctrl+shift+down to select the entire range 2. Ctrl+C 3. Ctrl+V into a different worksheet (at which point everything shows up as either "#DIV/0!" or as the wrong number, depending on cells to the left) 4. Ctrl (brings up the paste menu) 5. V (selects "values") 6. The entire range is now pasted as values, and not as functions
Recently, however, clicking on "ctrl" after pasting brings up no paste menu. I haven't changed any settings. I will lovingly serenade the first (and second, and third) man (or woman) that figure out what settings I must change or what I must do differently.
I want to make a bar chart, When i use Excel and try to make it - i get a chart which shows the right column height but the Male and Female bars are BOTH IN 1 Colour. How do i make it so that male bar is blue and female is pink.
Im looking to create a bar chart in Excel 2010 where the totalnumber of widgets is 33 and the number produced so far is 11. The bar chart would be a single bar that represents the percentage complete (33%) with the chart maximum range being 100% which would represent the number 38.
Ive included a mock up example of what the data and chart would look like
I have a chart with 20 series labels that are series 1, series 2.... etc. I want to label them with 20 corresponding cells but can't find how to do this in Excel 2010 (I seem to remember this being easy to do in older versions). At the moment I am having to click on source data and edit each label individually... Is there a quicker way?
I make a bar chart from series of data from cells.
The data consist of values that regarding of students achievment in a test. On the cell if the value is 56.67 and on the data label is shown 56.67.
When the cell value is 50.00, which then I've change the format of the cell to custom format to 0.00;; so it only show 50 but on the data label of the chart it will show 50.
Even after I change the format of the data label it will still show '.' At the of the value.
How to hide the '.' On the data label if the decimals value is .00?
I am creating a chart with more than 2000 dates (each day). How can I format the axis so it only displays the 1st day of each quarter (01/01/2010, 01/04/2010, 01/07/2010...).
At the moment I cannot format the axis and minor/major units remain numbers.
I'm working on a criteria matrix in Excel 2010 that automatically plots a single member in a Scatter Chart based on the two values. There are 4 suppliers listed in Column D starting in cell D4 thru D7. The "x" value is listed in Column E starting in cell E4 thru E7. The "y" value is listed in Column F starting in cell F4 thru F7.
The scatter chart will plot the points correctly, however, there are two issues: 1) If I try to insert a data label using the "Series Name," or in this case, the supplier's name, it will lists ALL of the suppliers Column D. It will not list the single supplier listed in cell D4. 2) The scatter chart appears with gridlines as a 4x4 matrix with a total of 16 cells. The "x" and "y" axis both start at 0 and go to 4. I can shade the entire chart one color. However, I want to shade some of the cells with darker and lighter shades.
I have 6 columns. The 5th and 6th columns are the most important. The 5th contains a figure and the 6th contains a type.
Bascially I am trying to do a basic chart showing the following 2 things. A. Do a percentage chart of column 6 (service) but not of percentage of hoem many lines the product is in. Not based on percentage of how many times Apples are shown compared to other products. I need it to add up everything, then do a percentage of total amounts of oranges and total of for Apples from the figures on column 5. Also, if possible, the pie chart will even show teh actual total figure per product in each (or next to) each pie chart slice.
know the easiest way to do this (step by step) in Excel 2010 and then I can perhaps write a macro for the future?
I want to a horizontal line in a chart. There are only two figures with me. One I want to display as a column chart. The other as a horizontal line chart. (I can use both excel 2003 or 2010, whichever is suitable)
Can Pivot Table chart add another data from another sheet? I attached the link for this file (Add data1), it is because the file consists of several sheets and I do not know how to show here.
I would like to add the data from the "Rate" sheet into the Pivot Table chart (Chart.PT). I made an example by using normal way (Chart.Case (9)), the column series in the chart is the one I added from the "Rate" sheet. I wonder if I could do the same in pivot table chart.
Using 2010 - When I paste a chart I can initially retain the format of chart bar colours (Paste Special - source formatting). But when I select a new data source for the chart the formatting of the colours is not retained.
I was recently upgraded from Excel 2003 to 2010. I have some code that creates a 3d clustered bar chart, previously the chart's rotation was 0 and now it seems like Excel wants it to default to 15 degrees. I'd like to change the rotation back to zero, but Excel doesn't seem to see the chart.
I recorded a macro, inserted the relevant recorded code in my routine, but Excel doesn't seem to like it.
' begin code ------------------------------------------------ Dim Rng As Range Dim cTyp As XlChartType
Set Rng = Range(Cells(2, 1), Cells(11, 2)) cTyp = xl3DBarClustered
Charts.Add
[Code] ....
I'm getting a Visual Basic error that says "Run-time error '-2147024809 (80070057)': The item with the specified name wasn't found."
Excel seems to know the chart name, but doesn't seem to think there are any shapes (initially, a loop looking at the names of shapes in the shapes collection returned nothing; printing ActiveSheet.Shapes.Count returns zero.)
What is the correct method of rotating a 3d clustered bar chart?
My X axis range is small 1 to 4. but I want to show minor grid lines at 0.5, 1.5, 2.5, and 3.5 only. I do not want lines at 1, 2, 3 or 4. I am not sure how to achieve this. as switching on minor grid lines, included those at the integers as well as at the half way points.
