I want to a horizontal line in a chart. There are only two figures with me. One I want to display as a column chart. The other as a horizontal line chart. (I can use both excel 2003 or 2010, whichever is suitable)
View 2 Replies
I am using the the stock chart and I would like there to be a horizontal line across the chart with a y-axis of the opening price. In the end I want this to be in VBA but how to do this manually I should be able to put it in loop of data that will produce many charts with a horizontal line starting at the day opening.
I have tried to add a new series to the chart but I'm using the Candle stick stock chart and the new series comes out as a vertical not horizontal line. I read about using a secondary horizontal axis but all the tutorials I find are in Excel 2003 and they donlt line up well with Excel 2007.
I found this link on charts with horizontal lines but again they are in 2003 and I'm using a candle stick stock chart not a scatter chart. [URL]
I am looking for a creative way to display a pie chart within a data point marker of a line chart.
My database has 3 value columns, Type1, Type2 and the Total (Type1 + Type2)
these are recorded per day (Date, in Column A)
I have a line chart that displays the total by date, but I want to find a way to display the percentage split of a particular day by type.
I was thinking to load the chart image into the Data point marker, but i don't think that is the best way as the data is updated daily and I would have to do it each day for a few line charts.
The other way I was thinking about was to have a generic Pie chat in the Line chart (Maybe in a corner) and the pie would update depending on way date series was selected or Mouseover'd)
the way that I am approaching it at the movement (Not the best way and by far not the coolest way. Is to have a list of all the dates in a column next to the Line chart and using some VBA, what ever date is selected in the column the pie chart displays the corresponding data. But eh challenge is that when there is alot of dates, I am going to be scrolling up and down.
I am using Excel 2010, but I cant not use the slicer's as the other users do not have 2010, they have 2007.
I would like to plot the 1st dynamic line chart as shown in [URL] ..... but i never write any excel macro 2010 before, any sample of this?
View 4 Replies View RelatedI would like to be able to add a line (a trend line) to a clustered column chart. The attached jpg (picture copied from Excel Charts - Easy Excel Tutorial) shows the general structure, with the red (poorly) hand drawn lines representing what I want to add to the chart.
If using Excel's Trend line functionality is not an option, I have already calculated the trend points adequately, so have the data to add as an additional series or combine with an existing series. (using Excel 2010)
I have a data series plotted as columns. Then I want a horizontal line at $5,000 to appear all the way across the chart. It appears from the 1st to the last data point, but there is blank space before the first point and after the last point. I would like the red line to extend into this blank space before and after, so that it is going across the entire chart.
I tried playing around with different axis settings and no luck.
I have a line Chart and want to create a static horizontal/indicator line.
I cannot create a new series to plot this horizontal line as I'm using an external data source (OLAP cube) as source data for the chart.
I'm using Excel 2010
I'm working on a workbook for tracking debt. It has 15 sheets. Instructions, Charts (for showing debt change over time), "Invisible" (this is where my chart data is, I plan to hide it), and 12 month sheets. On the Invisible sheet, for example, I have my data set up. I'm pulling the data from other sheets. In the screenshot, I'm using =Month12!P48 as the formula to pull my data from the other sheets. But, the user hasn't entered data yet for month 12, so the line chart drops to zero there. I want it to just stop and do nothing, until there is data in that cell. (I would prefer to use a line chart vs a scatter chart for this, but I have the same problem in both)
data.jpg
chart.jpg
I have created a population pyramid and want to add another chart on the secondary axis which I can do. The part which I seem not to be able to complete is getting the line chart secondary axis to read from the primary y axis. It seems to add a new axis, even when I delete this the line chart does not read correctly.
View 1 Replies View RelatedI'm having trouble getting the dates i want on the horizontal axis on a chart in Excel 2013. I want 12 dates along the axis starting at 01/01/2013 then each month until 1/12/13 however as you can see the dates are 01/01/1900.
View 10 Replies View RelatedI have a spread sheet with product codes on and 5 different prices types but they have only pulled through 4 times so need to insert a 5th line for each product code
View 2 Replies View RelatedUsing Excel 10, Win 7, a User Form with list box control, I only need one column about 7 characters long. (At this point my horizontal scroll bar is taking up more room than the list box window so I'd really like to lose it). I don't see any property options for scroll bars to set.
View 2 Replies View RelatedI want to add a user-form on a chart, which will have check-boxes that will allow me to select series(lines) that I want see and compare in a chart. Currently my line chart has 24 series (Lines) which makes the chart very difficult to view and looks very busy. How do I add list of check-boxes that will allow me to select one or multiple lines that I want to see at a time?
View 2 Replies View RelatedI am working with the Ganntt chart and horizontal bar charts but can't seem to figure out a way to force the X-Axis to behave properly.
In Excel 2007, I am trying to get the X-Axis to show major units of Months. However, in my chart options I can only change the Y-Axis to be Date/Monthly.
Changing my data layout (from the below) to be a vertical format produces the same problem, just in the other direction.
My data looks as follows:
System
Blocker
Production
Migrataion
Retired
Sys1
1/1/2012
780
Sys2
1/1/2012
400
60
90
Sys3
2/1/2013
30
5
1
The Blocker column is formatted as "No Fill" in order to cover a portion of the time-scale.
My X-Axis displays as random dates throughout the period and all of my data displays properly in terms of the scale on the grid.
What is NOT working is that the dates shown on the X-Axis really need to be based on a Monthly scale instead of the randomly selected dates Excel is using.
20120823.xlsx
I can't seem to find the right combination of options to make that happen or force a scale on the X-Axis.
I have chart like below. In empty cells I want either 1 or 0 (1 if software is installed and 0 if not).
Excel
Outlook
Powerpoint
Word
Computer1
Computer2
Computer3
Computer4
Computer5
Data of computers and their software are like this:
Computer1
Word
Computer1
Excel
Computer1
Powerpoint
Computer1
Outlook
Computer2
Outlook
Computer2
Excel
Computer3
Outlook
Computer4
Outlook
Computer4
Excel
Computer4
Word
Computer5
Outlook
So called Matrix Lookup was very close, but it finds data FROM Matrix (aka that first table). Is it possible at all?
Excel and Windows version:
Excel 2010 SP1
Windows 7
I recently switched to Excel 2010 and have a rather peculiar problem.Every week I update a bunch of charts in different workbooks. By update, I pretty much mean just shifting the range over one column or down one row to incorporate newly added data.
So I right click the chart, select "Select Data", update all the Data series ranges and then I click on the Horizontal (Category) Axis Labels button "Edit" to update the Axis label range.
I do all that then press OK. The data series have updated, but the axis labels haven't. So then I do the procedure again for the Axis Labels, hit OK again and voila: It worked.
But I ALWAYS have to do this procedure twice. It will NEVER update the axis labels the first time around. Even though the little preview window below the edit button show the labels correctly.
We make many graphs using XYscatter charts with lots of data points using Excel 2003 with the horizontal scale properly scaled as frequency. I have been asked to label that axis in some way as period (=1/frequency) without changing the scaling for the data plot. Is there a suitable way to do this? It would be OK to just change the axis numbers to 1/frequency computed from them automatically. Is Excel 2010 any easier for this?
View 9 Replies View RelatedMy chart is coming in blank when I set up a line chart. This is my data that I selected and then pressed chart. 1997
63.9%
1998
63.2%
[Code].....
I have a 97-2003 spreadsheet with approximately 22,000 lines of seperate companies. I need to know how to insert a blank line between the company names. I have been using the "Right Click - Insert" method but soon realized there must be 2000 different companies. The Company Name column is A.
View 7 Replies View Relatedi have 5000+ addresses with no punctuation in them, just seperated by line breaks. i need to be able to add a delimiter (semi-colon, colon, full stop, any will do) to the end of every line of the address, not the cell; in order to extract the info using 'Text To Columns' in Excel 2010
View 9 Replies View RelatedHow can I get this code to loop through every line on sheet?
Code:
Selection.Copy
Windows("SheetA.xlsm").Activate
Cells.Find(What:="Part Number", After:=ActiveCell, LookIn:=xlFormulas _
, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activate
[Code] ..........
I have a line charts with values above and below zero.
Im looking for a way to colour the steps below zero in one colour, and above zero in another colour - without doing it manually.
Using Excel 2007.
I have been trying to chart temperature differences over 10 day's time for six cities using a line graph. For some reason, the lines are all clustered at the bottom of my graph, with values of 0. My spreadsheet is accurate, without any blank cells. I'm using Excel 2010.
View 1 Replies View RelatedHow I could create a chart (standard column) with an average line in Excel 2010?
View 4 Replies View RelatedI have been given a task to create a line graph who has 10 categories and each category has 5 different values. I need to plot a line graph, so that those 10 categories should appear on the Y-axis instead of X-axis.
I am using Excel 2010.
I'd like to create a simple graph exactly like the one on the picture, but for the life of mehow to do this on Excel 2010.This is the data I have:
Seperation First target Second target
0 59.00% 0.00%
2 64.28% 40.62%
4 62.68% 48.99%
6 60.81% 65.83%
8 61.82% 70.21%
Warrantee.xlsx
I attached the sheet that I am trying to get up and running, there is two things I need to do, but cant get it working as I intend to.
Sheet 1 - When the invoice number is fulled in in cell F8 a message box must pop up requesting the hyperlink to the invoice saved on a share folder, but for now on the desktop, when the file is selected it (the hyperlink) must be returned to cell G8, then once the last cell (I8) has been completed, the line 8 must be locked so that it can't be editted again without a default password and a new line must be added below line 8 for processing, I tried recording the macro, but it only works on one line, and on the message box request, I truly am not up to speed yet, this I can't get up and running.
Excel 2010
Windows 8, Excel 2010
I have XYZ Coordinates for a continuous 3-D line that has numerous segments. I want to input a distance along that line, and have it create the XYZ coordinates at that point. See Image for reference.
Row 2 is my start point - I input the initial coordinates here - this point is the origin of the 3-D line
Column B is where I want the calculated Y value to go for each point
Column C is where I want the calculated X value to go
Column D is where I want the calculated Z Value to go
Column E is the how far along the 3-D line that the (to be calculated) point should be at. (MD1)
Columns G, H, & I are given to me, and I use this data to generate the coordinates in Columns J, K, & L
Column O is the cumulative length of the line at that coordinate. (MD2)
Basically, I had planned on writing a formula to:
Find the coordinates of the point who's MD2 (column O) is before the desired point's MD1 (column E)Find the coordinates of the point who's MD2 (column O) is after the desired point's MD1 (column E)Subtract MD's (column O) to get the length of the segmentFind the distance along that segment that MD1 (column E) fallsUse that distance to traverse along that line to the desired point.
Why when I drag the dotted blue page break line does it sometimes break the entire doc into one page per cell ?
The doc is not wide. When I first load I can drag the break line successfully. Then I print preview... select print on both sides... boom.. goes from 4 pages to 14. Then I go back to page break view... drag the line... boom... Hundreds of pages. Even if I revert back to printing on one side it still is messed up.
How do I make this stop?? What am I doing wrong?? Office 2010
I'm trying to create a macro that will look at each worksheet in a workbook and then delete the last line of data on each worksheet. The last row can vary on each worksheet. This is what I have come up with but it is not working. I am on Excel 2010 and Windows 7.
Sub Macro1()
Macro1 Macro
Dim ws As Worksheet
[Code]....
