how do i make a bar chart on Excel! 2010
Basically i have these figures
Male : 21
Female : 18
I want to make a bar chart, When i use Excel and try to make it - i get a chart which shows the right column height but the Male and Female bars are BOTH IN 1 Colour. How do i make it so that male bar is blue and female is pink.
Im looking to create a bar chart in Excel 2010 where the totalnumber of widgets is 33 and the number produced so far is 11. The bar chart would be a single bar that represents the percentage complete (33%) with the chart maximum range being 100% which would represent the number 38.
Ive included a mock up example of what the data and chart would look like
I have 6 columns. The 5th and 6th columns are the most important. The 5th contains a figure and the 6th contains a type.
Bascially I am trying to do a basic chart showing the following 2 things. A. Do a percentage chart of column 6 (service) but not of percentage of hoem many lines the product is in. Not based on percentage of how many times Apples are shown compared to other products. I need it to add up everything, then do a percentage of total amounts of oranges and total of for Apples from the figures on column 5. Also, if possible, the pie chart will even show teh actual total figure per product in each (or next to) each pie chart slice.
know the easiest way to do this (step by step) in Excel 2010 and then I can perhaps write a macro for the future?
I am looking for a creative way to display a pie chart within a data point marker of a line chart.
My database has 3 value columns, Type1, Type2 and the Total (Type1 + Type2)
these are recorded per day (Date, in Column A)
I have a line chart that displays the total by date, but I want to find a way to display the percentage split of a particular day by type.
I was thinking to load the chart image into the Data point marker, but i don't think that is the best way as the data is updated daily and I would have to do it each day for a few line charts.
The other way I was thinking about was to have a generic Pie chat in the Line chart (Maybe in a corner) and the pie would update depending on way date series was selected or Mouseover'd)
the way that I am approaching it at the movement (Not the best way and by far not the coolest way. Is to have a list of all the dates in a column next to the Line chart and using some VBA, what ever date is selected in the column the pie chart displays the corresponding data. But eh challenge is that when there is alot of dates, I am going to be scrolling up and down.
I am using Excel 2010, but I cant not use the slicer's as the other users do not have 2010, they have 2007.
I have a spreadsheet created in Excel 2003 (which is what we use at work, unfortunately).
My employees periodically take a test to ensure they have certain items memorized (or are making progress to that end). The spreadsheet rows show all 46 of my employees, and their test scores. The columns are the dates that the tests are administered. I can create a line graph based on the chart data, and interpolate these data with no problems.
The problem is that there are 46 employees! 46 lines on the same graph make for a very cluttered, hard to understand visual. I want to simplify the view by "filtering out" some of the data.
I have an additional column in my spreadsheet for each employee's work area (Area 1, Area 2, etc), and another column with data based on first letter of last name (the values here could be "A-G", "H-M", "N-S" and "T-Z", for example). I figure i could filter my line graph based on these two columns. For example, somehow select just Area 1, and reduce the number of lines on the graph to 16. Or better yet, Choose "Area 2" AND "A-M" and end up with 7 employees (and therefore 7 lines on the graph).
Here's what i have tried:
1) Select the work area column, and use the Filter, which created a drop-down list at the column heading. When i use this drop-down list, i can easily filter the data in the worksheet by Work Area, but this is not reflected in the line graph, which still shows all 46 lines. The problem was that i forgot that i had set the Calculation Options to "Manual". Setting this to "Automatic" (or leaving it on Manual and pressing F9) solved the problem, as the chart now updates when i use the filters. Calculation options are under the "Formula" tab in 2007, or in Tools -> Options -> [either calculation or formula, i forget what it's called] in 2003.
2) Create several separate line graphs in several separate sheets. I wouldn't want to assign someone else the task of maintaining a spreadsheet of such inefficient design.
I would like to plot the 1st dynamic line chart as shown in [URL] ..... but i never write any excel macro 2010 before, any sample of this?
View 4 Replies View RelatedI have a chart with 20 series labels that are series 1, series 2.... etc. I want to label them with 20 corresponding cells but can't find how to do this in Excel 2010 (I seem to remember this being easy to do in older versions). At the moment I am having to click on source data and edit each label individually... Is there a quicker way?
View 2 Replies View RelatedHow do I put a title on my chart, I'm using 2010 excel for mac.
View 2 Replies View RelatedI need to detect when some Chart is being deleted. This is part of an XL2010 VSTO addin I an developping. I could not find any event matching my need.
Did I miss some event somewhere? Would you know a (simple) method to detect when some Chart is being deleted by the user?
I make a bar chart from series of data from cells.
The data consist of values that regarding of students achievment in a test. On the cell if the value is 56.67 and on the data label is shown 56.67.
When the cell value is 50.00, which then I've change the format of the cell to custom format to 0.00;; so it only show 50 but on the data label of the chart it will show 50.
Even after I change the format of the data label it will still show '.' At the of the value.
How to hide the '.' On the data label if the decimals value is .00?
I'm using MS Excel 2010
I am creating a chart with more than 2000 dates (each day). How can I format the axis so it only displays the 1st day of each quarter (01/01/2010, 01/04/2010, 01/07/2010...).
At the moment I cannot format the axis and minor/major units remain numbers.
I am using Excel 2010 and European date format.
I'm working on a criteria matrix in Excel 2010 that automatically plots a single member in a Scatter Chart based on the two values. There are 4 suppliers listed in Column D starting in cell D4 thru D7. The "x" value is listed in Column E starting in cell E4 thru E7. The "y" value is listed in Column F starting in cell F4 thru F7.
The scatter chart will plot the points correctly, however, there are two issues: 1) If I try to insert a data label using the "Series Name," or in this case, the supplier's name, it will lists ALL of the suppliers Column D. It will not list the single supplier listed in cell D4. 2) The scatter chart appears with gridlines as a 4x4 matrix with a total of 16 cells. The "x" and "y" axis both start at 0 and go to 4. I can shade the entire chart one color. However, I want to shade some of the cells with darker and lighter shades.
Why the recorded code doesn't work? I recorded the code below to format the Y-axis values of a chart with the recorder.
Code:
ActiveChart.Axes(xlValue).Select
With Selection.Format.TextFrame2.TextRange.Font
.NameComplexScript = "Arial"
[Code].....
I want to a horizontal line in a chart. There are only two figures with me. One I want to display as a column chart. The other as a horizontal line chart. (I can use both excel 2003 or 2010, whichever is suitable)
View 2 Replies View RelatedExcel 2010 how to not chart zero values in a Pivot Chart?
View 1 Replies View RelatedCan Pivot Table chart add another data from another sheet? I attached the link for this file (Add data1), it is because the file consists of several sheets and I do not know how to show here.
I would like to add the data from the "Rate" sheet into the Pivot Table chart (Chart.PT). I made an example by using normal way (Chart.Case (9)), the column series in the chart is the one I added from the "Rate" sheet. I wonder if I could do the same in pivot table chart.
I have excel 2010....
I am having problems creating a chart off of the following data. Each of the cells which have a numerical value are v-lookuping from another sheet. It needs to remain this way as when I switch brands (through data validation), the numbers will update and the chart should as well. Right now, the chart shows these values as zero. I have done this a million times in excel 2007, but now with 2010, I keep having this problem
2010/Jul
2010/Aug
2010/Sep
[Code].....
Using 2010 - When I paste a chart I can initially retain the format of chart bar colours (Paste Special - source formatting). But when I select a new data source for the chart the formatting of the colours is not retained.
View 1 Replies View RelatedI was recently upgraded from Excel 2003 to 2010. I have some code that creates a 3d clustered bar chart, previously the chart's rotation was 0 and now it seems like Excel wants it to default to 15 degrees. I'd like to change the rotation back to zero, but Excel doesn't seem to see the chart.
I recorded a macro, inserted the relevant recorded code in my routine, but Excel doesn't seem to like it.
' begin code ------------------------------------------------
Dim Rng As Range
Dim cTyp As XlChartType
Set Rng = Range(Cells(2, 1), Cells(11, 2))
cTyp = xl3DBarClustered
Charts.Add
[Code] ....
I'm getting a Visual Basic error that says "Run-time error '-2147024809 (80070057)': The item with the specified name wasn't found."
Excel seems to know the chart name, but doesn't seem to think there are any shapes (initially, a loop looking at the names of shapes in the shapes collection returned nothing; printing ActiveSheet.Shapes.Count returns zero.)
What is the correct method of rotating a 3d clustered bar chart?
Scatter chart on excel 2010
My X axis range is small 1 to 4. but I want to show minor grid lines at 0.5, 1.5, 2.5, and 3.5 only. I do not want lines at 1, 2, 3 or 4. I am not sure how to achieve this. as switching on minor grid lines, included those at the integers as well as at the half way points.
Using Excel 2010. I have a Column Chart that shows 3 data series by month for one year
How can I customize the chart to group the data series on the X-Axis and repeat the 12 month series 3 times on one chart with one X-Axis to show each data series as a group?
I have a bar graph in excel 2010 and the vertical access is stuck in the middle of the graph. When I right click on the axis and select "format axis" I have an option to set where the horizontal axis crosses but never the vertical.
View 1 Replies View RelatedI would like to be able to add a line (a trend line) to a clustered column chart. The attached jpg (picture copied from Excel Charts - Easy Excel Tutorial) shows the general structure, with the red (poorly) hand drawn lines representing what I want to add to the chart.
If using Excel's Trend line functionality is not an option, I have already calculated the trend points adequately, so have the data to add as an additional series or combine with an existing series. (using Excel 2010)
The situation I have on my hands is over 200 users, were the majority can't use Excel's built in function to create PDF's.
Yes, I've tried to teach them, but I'm probably not a good teacher.
So, I've resorted to create a button at the top of the worksheet, that says "Create PDF". I thought this was gonna be very easy to program, but alas.
Is there a way to start the built-in Excel dialog that happens when you click "Create PDF/XPS" in "Save & Send"?
Why the heck every time I enter in to the "edit text" area of the chart title box in a chart in Excel 2010 and type "=B27" (without the quotation marks, and understanding the contents of "B27" has the text I wish to display) does this idiot thing simply display "=B27" (again, without the quotation marks)???
View 4 Replies View RelatedI am trying to make the contents of a cell into a chart title.I know I can do it like this...
ActiveChart.ChartTitle.Select
Selection.Caption = "=tab_name!R2C1"
However, I am trying to use the same macro on several different tabs in the same EXCEL worksheet. Obviously, I can't have the tab name in the macro. But, I don't get a title at all when I try to remove it like this...
ActiveChart.ChartTitle.Select
Selection.Caption = "=R2C1"
or
ActiveChart.ChartTitle.Select
Selection.Caption = "=A2"
Is this possible? I am (kinda new at) using EXCEL2010.
How to create a dispersion diagram which will show me the impact of 3 variables on oil-in-place, which for the sake of this description, I shall call 'X'.
The 3 variables (let's call them A, B and C as I needn't go into the details) are used in the calculation for X. I have created tornado diagrams, which show me the positive and negative impact of each variable. But I'd like to create a diagram with X along the x-axis, with X increasing, and on the y-axis, have -1 to +1 which represents the impact of the variables A, B and C on X. So, as X increases, variable A might also increase toward +1, which would show me that as variable A increases, so does X. The reason why I'd like to learn how to do this is, whilst a tornado diagram will show me the impact of each variable on X, a dispersion diagram will also show be trends between variables. So, for example, variables B and C might both increase along the same trend, which would show me two things: that they both positively impact X and that one variable is dependent on the other.
I remember from a few years ago that an old version of Excel had a data sensitivity tool which did something like this. I'm working off of Excel 2010 now, and I've had a little look at the 'whatif' functions, but that doesn't seem to be what I'm looking for. Also, I would kind of like to see how to do this myself with the raw data, instead of the behind-the-scenes stuff.
I'm using Excel 2010 and I've got a chart on a worksheet and the worksheet needs to be protected. I'm able to manipulate the chart in any fashion EXCEPT the position of the Data Labels. Is this a bug in Excel 2010?
View 3 Replies View RelatedThis was so easy to do in excel 2003...However im now using 2010 and i cant figure out how to tell excel to ignore the empty cells for a scatter plot.
View 3 Replies View RelatedI am trying to create a chart that would show all of the Amount values for each Size value that is in the example data below. The Size column has fixed values. In my example the values are: .5, 1, 2, 5, 8, 13 and 21. The Amount column data is variable. Any of the static Size values can be associated with many Amount values. I was attempting to have the static Size values on the X (horizontal) axis and the Amount values on the Y (vertical) axis. I would like to have all of the Amount values for each Size value be shown directly above the corresponding size value, in one vertical line. See example below.
I an creating this type of chart in Excel 2010.
Note, I am still new to this forum and don't know how to post pictures or Excel data into my posts. I am also using dots (periods) to provide separation in my examples.
Amount...Size
58.5.......21
1........... 0.5
2........... 1
1.5.........1
27.5.......13
12.5.......5
2............1
3.5.........2
17.5.......8
4........... 2
48..........21
0.5.........0.5
15..........5
11..........2
Chart that I am trying to create. The chart example is not to scale.
...........60.|
...............|..........................................................................*(21,58.5)
Amount.50.|
...............|..........................................................................*(21,48)
...........40.|
[Code] ........