Camera Tool (copy And Paste Do The Same Thing)
Dec 8, 2009So what's so special about the Excel camera tool? To me, copy and paste do the same thing. What else can it do that Copy cannot?
View 9 Replies
ADVERTISEMENT
How To Use Camera Icon Tool Using Macro
Jul 9, 2012How to use the Camera Icon Tool using a Macro?
I want to copy the First Row which is the Column heading of one Sheet to a different Sheet
Example : From Col A till Col G First Row is to be copied as an Image. Normally I do it using the Camera Icon, however when I tried recording a Macro for the same it did not work..
So how do I that if I provide the Start Column and End Column Alphabet as a Variable is that possible.. I want this Image to not remain Volatile which is the case using the Camera Tool..
So, how do i get the picture of only the first row or any row and store it is an Image in a different sheet as static picture so that even when the sheet is moved to a different location it does not make a difference to the Image.
Camera Tool To Take A Shot Of Some Range Of Cells
May 30, 2007I'm having this problem where I used the camera tool to take a shot of some range of cells. After taking here on the worksheet the image looks fine but when I print preview the same image seems to be bigger than the actual image.
View 4 Replies View RelatedExcel 2010 :: Saving Camera Tool Snapshot?
Jun 18, 2013In Excel 2010, I used the camera tool to take a snapshot of a selction of cells. How do I save the snapshot only as a JPG or GIF file?
I know that there are programs outside of Excel that can take snapshots or print screens, but I need to accomplish it using the camera tool so the snapshot is the exact selection everytime. Is the excel snapshot temporarily saved somewhere on my computer where I can access it?
Excel Camera Tool - Print Preview Different From Display On Screen
Nov 27, 2012I have place a camera-picture of a table on the right side of a chart. On the screen it looks great! (See below - with some redaction)
Problem Example.png
.... but when I print it the table expands off of the side of the chart. Scale is 100%, zoom is 100%, Excel 2010 (See below - with some redaction). Whether or not I have a print area does not seem to make a different in the problem. Also, it appears that this happens with any shape I put in that place, it's not specific to the camera tool.
Problem Example_Print Preview.png
Reference Cell In Current Workbook Whilst Using Camera Tool
Jul 17, 2013I'm making a dashboard and currently using a camera tool to show a sheet in a different workbook.
However the camera shot should show the sheet for the current month. (the workbook contains 12 sheets one for each month)
I was trying to reference a cell within the dashboard workbook in the formula bar to select the correct month.
[Code] .....
This is the workbook being referenced and
[Code] ....
This is what I have to try select the sheet with the right month. W2 contains whatever month it currently is.
I get that this formula is wrong because I'm referencing a sheet/cell in the dashboard workbook right after calling the tracking workbook, I just don't know how to write it correctly.
Blurry Chart When Using Camera Tool / File Becomes Non-dynamic When Saved As Xlsx
Mar 24, 2012Description:The chart shown in the file is a picture using the Camera Tool. The real chart is in the worksheet "Chts". When using the dropdown & radio button, the chart is supposed to change accordingly.
Problem 1:The picture from the camera tool seem to be blurry. The lines also seem thicker. Any rectifications for this?
Problem 2:If I save this file as "xlsx", the chart will not change dynamically when the dropdown is changed.
2003 version
[URL]
2007 version
[URL]
Refresh IMAGE Tool Before Copy As Picture
Aug 28, 2007I have Image tool located at range B1:F36.
I have a simple VBA Code like as following.
Sub test
Sheets("Sheet1").Image1.Picture = LoadPicture("")
Sheets("Sheet1").Image1.Picture = LoadPicture(CFPicPath + CFPic)
Range("A1:G37").CopyPicture Appearance:=xlScreen, Format:=xlPicture
Sheets("Sheet2").Select
Range("A1").Select
ActiveSheet.Paste
end sub
I have a problem at
"Range("A1:G37").CopyPicture Appearance:=xlScreen, Format:=xlPicture"
It always copy a blank picture to paste on sheet2.
How can I able to refresh IMAGE tool before copy range as picture ?
Copy, Paste, Change Font Size, Copy, Paste, Print VBA
Mar 29, 2009I'm using 2003.
1. Copy cells B5 to V-First blank row in Strength Tests worksheet
2. Paste cells into Racks worksheet in cell C5
3. Change font size to 6
4. Sort by Column T descending then by Column C ascending
5. Copy one row (A5-W5 (1Rx23C)) from Racks worksheet
6. Paste row into M1 worksheet in cell D4
7. Print M1
8. Drop down one row on the Racks worksheet
9. Repeat steps 5-8 until there's a blank row.
Delete The 'white' Thing
May 15, 2009i dont know what that 'white' thing called. After i copied the data from other sources, i cant delete the 'white' thing. even i delete the whole sheet, the 'white' thing is still there.
View 2 Replies View RelatedStrange Thing Only On One Computer Running This XLS
Feb 4, 2009Copy of the scaled down Workbook are enclosed. Password is "j". Sheet("Final Schedule") is one of 11 sheets in the Workbook. Range("a10: BE120") is copied from another Sheet and pasted.
ISSUE BACKGROUND: Entries into cells are Data Validation and a drop down on each cell. In cells C15, 16, 17, 18 or O15, 16, 17, 18 First time the Sheet is opened: user has no problem if they select a D from the drop down.
ISSUE:
But if user types in D and hits enter key, contents of G10: M10 (merged cells) is copied into that cell. Any thoughts on where to check or what settings to check? It only happens on that one computer.
Selecting Certain Thing For Pivot Table
Dec 8, 2011I'm creating a pivot table using visual basic. for 1 of the titles in the column ("Organization") I only need to Select "Telford", "Kaiserslautern" & "Morocco" out of several other options. The code I've got at the moment only tells the pivot table not to show the ones I dont want as per below:
Code:
With ActiveSheet.PivotTables("PivotTable2").PivotFields("Organization")
.PivotItems("Printers KL").Visible = False
.PivotItems("Printers TE").Visible = False
.PivotItems("Valls").Visible = False
.PivotItems("(blank)").Visible = False
End With
Not all of these options are always in there so the macro crashes when it can find 1. Is it possible to de-selct all options then only select the 1's I want rather than the other way round using visual basic?
DTPicker: Redo The Same Thing Over And Over Again When Others Opens
Feb 21, 2007i implement DTPicker inside a userform in my pc ... but when i open the userform in other pc there's an error saying could not found DTPicker ... when i reopen it in the pc that i've made the userform the DTPicker is no longer there and i had to redo the same thing over and over again when others opens it in other pc.
View 4 Replies View RelatedGetting A Cell To Say One Thing Based On Other Cells
May 6, 2007I have a worksheet that does a running total. It also correlates with another worksheet. But, for this one B4 through B23 is added together on B25, then on B27, B25 is subtracted from B3(original balance). In the cells B4-B23 there is a formula to pull information from another worksheet. I am wanting to incorporate a formula with that for if the total that is in B4 through B23 adds up to the original balance (B3 or B25) then it will say PAID.
I have ...
Speed Up My Worksheet. The Entire Thing Relies On Now()
Nov 7, 2009trying to speed up my workbook, because all of the formulas depend on time and the now() function. It takes forever to add/change anything.
Here is a general description of my worksheet. It's for a game called tribal wars (online browser mmo). You have towns around you, which create resources to plunder. This resources build up over time, thus I need to use the now() function in basically every formula. Each row finds the distance to that location, the time since last attack, the estimated resources built up since the attack, and the number of troops to send.
If only there was some way to update now() only every 1 to 5 min instead of every time I hit a key...
Camera Feature Possible Size Limitation
Nov 2, 2006I want to use the Camera facility to show a 13 column by 19 row section of a large report in another WorkBook. I have outlined the area I need copied .... clicked the Camera icon .....but when I enter the data in the receiving sheet I keep getting the message ...." The Picture is too large and will be truncated" Is there a maximum size that can be transferred
View 2 Replies View RelatedDrag The Entire Thing Down And Be Able To Make It So That It Is Hidden (the Cell Is Blank)
Oct 23, 2009First, I can get the balance formula, and when I drag the square at the bottom right, I am able to drag the entire formula down...I want to do that. However, when I drag it down, the number keeps popping up. I was wondering if there is a way to be able to drag the entire thing down and be able to make it so that it is hidden (the cell is blank) unless the debit or credit cell in the corresponding row is filled. Also, if possible, I want to be able to drag it down to infinity, so it can go on forever, so that there is no need to always drag it down when I add more things in it. I am attaching what I have till now.
View 5 Replies View Related2003 - Conditionally Change The Range In Camera Object
Jan 15, 2010I am using the camera tool in excel to show a range of cells. Is it possible to change the range the camera tool looks at conditionally? It's possible to do it manually and I've seen this done using a camera object to refer to charts in single cells, but have been unable to figure out how to do it by range.
View 9 Replies View RelatedCopy / Paste Certain Cells Then Paste 3 Sheets Into New Workbook - VBA 1044 Error?
Feb 3, 2012This macro works fine on my machine but not with other users:
This should copy/paste certain cells then paste 3 sheets into a new work book.
ON other computers it seems to paste in a picture? works OK for me?
Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy
[Code] ..........
Excel Macro To Copy Data From Array And Paste To Separate Sheet Paste Special Transpose
Jan 29, 2014I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Simple Copy Sheet Paste In Other Book But Paste Values?
Jun 20, 2013Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
Copy / Paste Every Sheet Single (P Column) And Paste To Notepad
Sep 6, 2012copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies View RelatedCreate Macro That Can Copy / Paste Or Cut / Paste Rows Into Different Spreadsheet
Oct 1, 2012I have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
Copy And Paste Without Disturbing Existing Data In Paste Area
Nov 25, 2012HTML Code:
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
Range Pear
A B C D E
4 1 3 5
5 1 1 1
6 2
7 2 2
8 5 7
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
Excel 2007 :: Removing Border Line From Camera Shot
Dec 1, 2013The title in the attached chart is a camera shot transferred from another excel 2007 worksheet in the same workbook.
I'd like to remove the border line, I've tried right clicking... then format picture ...no dialogue box comes up. I've scrolled through all the commands in the ribbon + non ribbon commands and can't find anything that seems appropriate that's not greyed out ....
border line.docx
Macro To Change Linked Picture (Camera) Cell Reference
Jun 20, 2008I am a complete newbie with the camera tool. Is there any way to make the camera tool dynamic so that the cells the tool is referencing can change upon the click of a button or some other form of switch? I am creating my first dashboard and this is the last step for my report to be completely dynamic.
-----------------------------------------------------------------------
Never mind, I apologize i just figured this one out...
Create a user defined formulaIn the UDF Create an if statementThe if statement's condition is the logistics in the shift mechanismThe value if true is the first group of cells you want in the snap shotThe value if false is the second group of cells you want in the snap shot, The range you want to toggle betweenRename the cell reference of any snap shot you have taken with the UDF name. In my example my UDF is "Dude" so when you select the camera tool it shows =Dude as the cell referenceReference a scroll bar to the conditional cell you selected in the if statement or choose statement. This is the shift mechanism
If you want to toggle between more than 2 sets of data use =Choose instead of =if
Excel 2010 :: Camera Function - Take Picture Of Graph And Pasting To Alternative Sheet?
May 21, 2014Excel 2010 and the camera function.
I have been using it to take a picture of a graph, pasting to an alternative sheet within the same workbook, and renaming the picture by a defined name. S by selecting the names from a drop down list the picture will select various different sized graphs defined within my drop down.
What I am experiencing is when I initially do this the pic works great and resizes automatically with each selection, however the next day some of the pictures resize and some do not.
Is this a glitch within excel or am I missing a setting which will resolve this?
Prevent Copy / Paste Cells With Comments Or Allow Paste But Do Not Paste Comments
Feb 4, 2014How would you prevent the copy/paste of cells that have comments?
Also, how would you allow cells with comments to be copied and pasted without pasting the comments?
I also have an aside question about the forum advanced search. When searching for multiple search words, how would you type the search to include all words, for example, "prevent" & "paste" & "comments".
Copy And Paste From One Sheet To Another Based On Column A Using A Macro Copy Button
Jan 22, 2007I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
Copy & Paste Macro Won't Paste
Jul 10, 2006I want this macro to find in this case "406" in column A which is at the very end of the last block of 160 rows of information.
I then want it to move up 159 rows and copy 160 rows of information underneath the last block of information.
i.e.go to A5280 , then go to a5121, copy rows 5121:5280 to 5281.
It falls over on the very last line of code I can see A5281 selected but it won't paste....
