I have an expense sheet calculated, need to show the sum of the "+" number in
a cell that does a subtraction of 2 numbers .. income and subsidized ... as a
- that it negitave amount in red if it is less than a specific numbe. ie 2500
I have two columns of data and cannot get the column to change the format to display as currenty or accounting, with a currency £ sign and comma separator...I select it all and go to Format cells to do the changes, but it does nothing, at all!
View 2 Replies View RelatedHaving trouble applying a name to the line
For Each ctrl In Form1.Controls
The name of my Form is "frmLayout"
How can I change Form1.Controls to "frmLayout".Controls ?
don't tell me just to type in it without the quotes, I mean when the name is in a string variable.
Is it possible to dynamically change how values are displayed in charts?
I have a list which references different named ranges. It either needs to display the values in a graph as a number (without decimals) or a percentage depending on the source. Is this possible? Maybe with some VBA? Or am I asking too much from excel?
I have a cell that always requires a negative currency number.
No doubt I will inadvertently enter a positive number now and then.
Is there a conditional format method or something that will take my cell entry and always change it to negative?
This spreadsheet will be tracking sales and purchases. I want to be able to have any purchases formatted as an expenditure (negative sign or brackets) to show it is money out. Column C "Action" has a drop down with either Buy (infrequent) or Sell. I want to be able to have column I "Unit Price" be a negative number if the corresponding cell in the same row in Column C = "Buy". I do not have these prices formatted as currency as their are 2 different currency used and I don't know how to make the correct currency format appear automatically, though I do have a drop down validation column for which currency the transaction was in, so maybe that is possible. I know this is probably simple, but I don't spend that much time using Excel. I have some sample data in their for the moment.
View 2 Replies View RelatedI created a drop down list in three cells for date, month and year using data validation.
But I need these cells to display by default DD,MM,YYYY.
what's the way to do it.
I am having a problem with excel, I need to create a search box, which will be displayed on my first work sheet, which is the summary page and I need to search through all of the information on the other sheets within the excel document, they type of information that I have rages from reference numbers, names and amounts (currency) and once someone has input the information that they are looking for and has found every occurrence it will display this on the summary page, is this something that can be done?
View 9 Replies View RelatedI'm trying to solve a strange problem in a piece of code.
I have a variable that is define as Double called STD. When i try to insert that variable in a formula the decimal sign (for me a comma "," because I'm Portuguese) gets converted to ";" (which is for me the separation sign for the expressions in excel formulas. ex: AND(A1>0;B1>0)=TRUE). The code is:
My boss uses the + symbol and the = symbol in his formulas eg "=+E3*E4" What is the advantage or difference in this as to just using "=E3*E4"
View 3 Replies View RelatedIn a formula, what effect does putting a plus sign after an equals sign? e.g.
=+((1+B8)^12)-1. I orginally assumed that it made sure that result the would always be positive but I was wrong.
I realize all the numeric data was originally not in percentage format (a simple division without being multiplied by 100). So when I set the vertical axis to percantage format, it does display it as a percentage but with the "%" sign. Is there any way I could get rid of the sign? It's not necessary as the axis has already been titled accordingly. I'd hate to redo all calculations, multiply by 100 and then create new charts only to get rid of the sign...
View 1 Replies View RelatedI am trying to create simple password protected system in excel. What I have already done is I have a worksheet, which is not visible that holds all user names, passwords and user roles, such as admin and user. Now my problem, I need to create a UserForm that will prompt user to input their details prior to using the workbook. I have no problems with creating the form itself but I cannot really create a code to handle the task. Also, there will be only one system admin, which means that only admin should be able to create users, so that when admin will sign in, he should be able to see the button on the home screen, something like "Create New User". I cannot post my workbook because of the Corporate Copyrights and privacy, but what I can do is post all named ranges that contain password, usernames etc.
View 2 Replies View RelatedI would like to change a number to a letter and then drop a digit from the end.
Say my data in A1 reads 81234568, and I would like it to display in cell A2 as h123456.
Excel 2010
I have the following SUMIFS formula that produces the desired results until I get the the last qualifier, displayed in red:
=SUMIFS(JBHAMOUNT,JBHMONTH,C18,BNSFCATEGORY,B20,BNSFLOCATION,"Alliance")
The result of this formula is: #VALUE!
I have a situation that I cannot get my hands on. I have a set of Project Numbers in my Column A. (Will Try to post an example).
I need that everytime I change a number in my Column B that it will change all the numbers, in my column B, based on the matching Text in my Column A.
Demo1.xlsm
Recorded macro. The hope is to insert a excel formatted table a set number of times. I have found a loop code that references a Cell A1 and repeats that amount of times. So if A1= 10. There should be 10 tables inserted. However on the second time there is a fault with the table name. I need the name to change each time the loop is run. ie Table1, Table2, Table3 etc up until the loop stops (A1 contents).
I am using excel for windows 2010. The macro that i have so far is below.
Sub LoopTest()
Dim n
Dim V
Range("A1").Select
V = ActiveCell.Value
[Code] ........
After searching this board, I am using a check for this issue to alert when the problem occurs, but I'm hoping to tell Excel to fix the problem itself. The issue occurs when a set of data equals 100%, but when fewer decimals are displayed, the displayed total equals 101% or 99%.
Example:
0.6%
1.6%
97.8%
(Now when the display is changed to no decimal points)
1%
2%
98%
As you can see, the data appears to total 101%, and my boss is being a (insert any comment you probably have about your boss) about me not manually reviewing every single report that goes out for this 1% difference. As there are probably 400 different points at which this situation can occur on a daily basis, working harder is not the solution. /rant
I thought I once heard about a formula or setting where Excel will only calculate the displayed values instead of the actual value or formula. Ideally, the formula would know to take the three values, figure out the 100% limitation, and round the largest one down so the other two can round up. The example above is probably 99% applicable, as we would be rounding the largest value down in order to round the other values up.
Meaning intended result:
1%
2%
97%
I've data from A1 till G1. Now I will hide column B & D I just want to have total of displayed columns that must ignore values written in column B & D
View 1 Replies View RelatedI have a worksheet I use at work that calculates volume proccesed hourly, and also shows a running total as you enter hourly figures into the table, my question is can you hide everything in the result cell until the figures for each hour are entered ? currently all the result cells have irrelevant numbers in them until you enter the hours figure and the formulas do there thing, I could relly do with them being blank until the relevant hours information is input?
View 2 Replies View RelatedI want no time functionality nor any calculation of the entries. I simply want to type into a cell for example: 0908 and have it displayed as 09:08. I tried custom formatting the cell to hh:mm but then it displays as 00:00.
This is for a real-time incident logging sheet and the less the operator has to type, the better. I know it is only an extra Shift+: but it will be so much easier without having to do it.
I like the way the names auto fill. Though would ilke to have it so say when roc is entered it shows as a dropdown so you can see that there are more than one ROCHESTER.
Like a search i guess, That would be valid to the first to letters. so if you had name donald, david & daffy when D is entered it showes all three then when DA is showes only David & daffy.
The project that i will 1st use this on is a contact address ph book.
I am just wondering if there is a way to allow a macro to continue running in the background once a userform has been displayed? I have disapled the 'close' button and the last action of the macro is to re-enable it.
I want to sum cell A1 and result will be displayed in B1
AB1ValueResult29292.50*10+8952*15+8550*10
Using the below code, I want data in range with format (for ex: J2:K7) to be displayed in the email sent in the place of Email_Body1 place.
Private Sub CommandButton1_Click()
Range("H2").Value = Date
Dim myOutlook As Object
Dim myMailItem As Object
Dim FName As String
Dim i As Long
[Code]....
I'm creating a customized, interactive calendar with several drop-down menus included for each day of the week. I want to have a self-adjusting section at the bottom of each month that shows which values have not been selected in the drop-down menus on any day.
I have a column next to the source list for the drop-down menus with =IF(ISNA(MATCH formulas to show if a value has been selected anywhere on the calendar. If no one has selected a certain value from any of the drop-down menus then "XXXXX" shows up in the row next to its source (one "X" for each column, Mon-Fri). If a value has been selected, then it says "FALSE".
I now want to have a section that lists only the values that have not been used, with "XXXXX" next to the source data. However, any formula I use is not able to differentiate between "FALSE" and "XXXXX" because they are both "0" values in a numerical sense. Can I create a formula that references the displayed value, rather than its true numberic value? What formula would be best to use to list only data not being selected from the drop-down menus? Is there a simpler way of displaying this information than what I'm trying to do?
I have a column with dates in the following format: dd/mm/yyyy h:mm
but im doing an XML export and excel only exports in text format. I would like to somehow resterize or only use the displayed amount instead of the text which is exported (ie- 37805.1640277778)
I have a macro that once clicked shows my userform. Is it possible to have this userform displayed whilst also allowing the user to click into other cells on the worksheet?
View 9 Replies View RelatedOn my worksheet, cell A1 and A2 both contain the value:
0.1655555
I've changed the number formatting to three decimal places so it appears on the sheet as 0.166.
In cell A3 I have a forumla =A1+A2 which currently comes back with the value 0.331 (0.1655555+0.1655555=0.331).
Instead of adding together 0.1655555 I want it to add the displayed value of 0.166 so it should then come back with the value 0.332.
While working within the same worksheet, why not put all the routines in one Module instead of using different modules?
BTW, what made me raise the above question is that I have 2 modules in my test worksheet. But when I go to Tools | Macro | Macros > This Workbook, it does NOT show the sub-routines of the first module