Excel 2007 :: Custom Sort Column With Macro Button
Jun 20, 2013
I already have a Macro button built that hides values in column A. The next step I am trying to perform is a custom sort on column B in this order "Backordered", "Sourced", Shipped", and "Received". Here is my code that I have so far but where to begin adding in code to make this button sort.
Sub Inbound()
ActiveSheet.Cells.EntireColumn.Hidden = False
ActiveSheet.Cells.EntireRow.Hidden = False
Application.ScreenUpdating = False
[Code] ........
Excel 2007/Windows 7
View 1 Replies
ADVERTISEMENT
Jul 10, 2012
I am trying to sort a bunch of data by a custom list from left to right and after running the macro successfully excel crashes upon saving. I have tried this on different computers, resaved, started from scratch and it always crashes so there must be something with the macro that is causing this.
here is my macro:
Edit: It seems that the last line of code is causing my problem. I have started from scratch and gone though all the code one at a time and saved after each run. everything is fine until the "Application.DeleteCustomList Application.CustomListCount" is run. after that excel crashes when saved.
VB:
Sub Macro3()
'
' Macro3 Macro
'
[Code]....
View 1 Replies
View Related
Aug 9, 2013
I've been trying to research how to do this for a while now and still can't figure it out. My impression is that this is fairly straightforward in Excel 2010 since the menus and ribbons are easily customizable but not so in Excel 2007.
So far I can get macro shown as a button in the Quick Access Toolbar. But the issue is that I can't organize them or customize the icons.
Is there an accepted practice for this?
View 4 Replies
View Related
Aug 3, 2009
I have following code, which sorts data if user "double clicks" on cells A1, B1, C1, or D1. If the user "double clicks" on cell D1, I want to sort by column D but I want to apply a custom list. The data is in the "Custom Lists" table but I can't figure out how to apply to my code.
The sequence/sort order of the list is as follows:
aaa+, aaa, aaa-, aa+, aa, aa-, a+, a, a-, bbb+, bbb, bbb-, bb+, bb, bb-, b+, b, b-, ccc+, ccc, ccc-, cc+, cc, cc-, c+, c, c-, ddd+, ddd, ddd-, dd+, dd, dd-, d+, d, d-
code is as follows:
View 3 Replies
View Related
Aug 4, 2009
This is somewhat related to a post I had submitted previously but a bit more complex http://www.excelforum.com/showthread.php?p=2139259. I have following code, which sorts data if user "double clicks" on cells A1, B1, C1, D1, or E1.
If the user "double clicks" on cell D1, I want to sort by column D using following custom list: AA1, AA2, AA3, A1, A2, A3, ZZ1, ZZ2, ZZ3, Z1, Z2, Z3. If the user "double clicks" on cell E1, I want to sort by column E using following custom list: AAA+, AAA, AAA-, AA+, AA, AA-, A+, A, A-, ZZZ+, ZZZ, ZZ+, ZZ-, Z+, Z, Z-
The issue I seem to be encountering is that I can’t use more than one custom list (e.g., if I use the column D sort list for column D, column E is also using the same list). I can’t seem to apply individual lists to each column. Would I need to “hardcode” the lists in my macro?
View 5 Replies
View Related
Jul 24, 2014
I am using someone else's old spreadsheet.
This spreadsheet uses a custom format of ##-##-## for a date such as 012214 prints as 1-22-14.
I need to convert this into normal short date format such as 3/24/2014 because there are four columns of dates in the spreadsheet and we have to do some addition and subtraction from one column to another.
I am using Excel 2007.
View 4 Replies
View Related
Aug 10, 2006
I need to select a print area that includes all rows to the last row with data in column A. What is the proper code for this? I tried the following (shot in the dark), and of course it doesn't work.
Sub Print_()
ActiveSheet.PageSetup.PrintArea = "A( Cell((65536).End(xlUp)):X1"
ActiveSheet.PrintOut
End Sub
View 9 Replies
View Related
Nov 14, 2012
I have a large spreadsheet from which I need to create separate Reports by hiding various rows and columns. I have followed instructions for creating a couple of Custom Views (View tab, Custom Views, Add, Inserted Name, OK, Saved the document) but nothing happens apart from getting the message "Some view settings could not be applied". In fact none of the view settings were applied.
View 1 Replies
View Related
Jul 22, 2013
Using excel 2007 I've created a new tab and wanted to place the 2003 file menu on it. I don't know how to include it automatically in the tab using a combination of XML and VBA. So I created a button with the callback to run some code. Unfortunately, it still places the item in the Add-in tab. How can I get the undernoted code to operate within my new tab with either XLM or VBA?
Code:
Sub InsertFileMenu2003()
Dim cb As CommandBar
Set cb = Application.CommandBars.Add("xl2003 Menu", , True)
CommandBars("Built-in Menus").Controls("&File").Copy cb
Application.CommandBars("xl2003 Menu").Visible = True
End Sub
View 6 Replies
View Related
Mar 26, 2010
Any way to import and use icon sets for conditional formatting other than the ones provided in excel 2007? I would like to have some circles and shapes in colors other than just yellow, green, red, and gray.
View 5 Replies
View Related
Jul 18, 2013
We are using Windows7 with Excel 2007. We have old code from excel 2003 and earlier that was adding a msoControlPopup with other sub-controls using the code below:
Code:
Set HelpMenu = CommandBars(1).FindControl(Id:=30010)
If HelpMenu Is Nothing Then
' Add the menu to the end
[Code].....
I tried going to Excel Options>Customize>Reset to reset any customizations to the quick access toolbar as this was recommended by something else I found online. This did not fix the problem.
I can find the control in the Immediate window but it just isn't showing in the add-ins tab. if I can find and repair that XML file perhaps?
View 9 Replies
View Related
Sep 23, 2013
I am using MS Excel 2007 and I am trying to create a macro which will copy column E and paste the data in column E to the bottom of column D. However each week the amount of rows in these column with vary, they will always be the same amount of rows in column E as in column D but there may be 20 rows one week and a 100 rows the next.
The formula I currently have is below but this will only work for a specified number of rows. How I could change this to work for any number of rows?
Code:
Sub IPT()
'
' IPT Macro
'
'
Range("E1").Select
[Code] .....
View 2 Replies
View Related
Mar 14, 2013
I have a table with headings for each column.
How can I make the columns headers buttons/clickable, so that it sorts the rows on the column that was clicked upon?
View 2 Replies
View Related
Feb 20, 2013
Running excel 2003 and have a number of sheets where i want buttons along the headings to sort a selection of rows.
For Eaxample one sheet i have data in range A6:AD135. i would like to assign a macro to various buttons on row 5 to sort by that column ie button in column b sorts all data in the range by column B.
View 4 Replies
View Related
Aug 16, 2012
I have a worksheet that has a number in cell K5 - the number is generated on "file open" code and is custom formatted as "TN"0000. Thus 1 appears as TN0001, 2 as TN0002 and so on. I am trying to save a copy of the workbook based on the this cells contents i.e. TN0001.xls, TN0002.xls etc. but the files are saved as 1.xls or 2.xls. The code I am using is
ActiveWorkbook.SaveAs Filename:="C:DataExcelFORMSDelivery Note" & Range("K5") & ".xls", _
FileFormat:=xlNormal, ReadOnlyRecommended:=True, CreateBackup:=False
I know I must make reference to format within the above....but how? if try something like
" & Format(Range("K5").Value, ("TN""0000")) & ".xls"
I get TN00000.xls
View 2 Replies
View Related
Apr 1, 2013
how to soft vaue of date in excel 2007. only arrange by date (not including month).
for examples:
it like that:
13/07/2012
15/01/2012
18/04/2012
View 1 Replies
View Related
Nov 17, 2011
I am struggling with doing a sort, of a group of alpha characters within a cell (Excel 2007). My data was exported from Oracle 8 as a varchar2 and consists of letters.
Example of what I have
BAC
GHL
DFE
MEG
Example of what I want
ABC
GHL
DEF
EGM
All I could find were these complex looking solutions involving cursors, plsql, etc. I'm hoping there's a simple solution, maybe within Excel. I've tried different formatting, made sure no other characters were sharing the cells, and tried typing fresh data into a cell (instead of the exported data).
View 8 Replies
View Related
Nov 20, 2013
I'm using Excel 2007.
Is there a way to write a formula for the below?
Basically i want Excel to remove the duplicates in column D and show the results in column E (so my formula will start in cell E4)
Excel 2007DE3DATARESULT4BRAND1BRAND15BRAND2BRAND26BRAND1BRAND37BRAND38BRAND39BRAND210BRAND111BRAND3Sheet3
View 2 Replies
View Related
Oct 8, 2006
Is it possible to make excel sort ascending or descending but from mid way through alphabet and then loop through the alphabet again. for example. If Cell A1 had "A" in, it would sort as normal.
Cell A1 = A
Cell A2 = B
Cell A3 = C
Cell A4 = D
Cell A5 = E
If Cell A1 had "C" in, it would sort from "C" through the alphabet and then loop to the start of the alphabet as shown below.
Cell A1 = C
Cell A2 = D
Cell A3 = E
Cell A4 = A
Cell A5 = B
View 4 Replies
View Related
Feb 22, 2013
I am building a country ranking model which ranks several different macroeconomic indicators and applies a weighting to each of the indicators. I have an overall ranking column which is an average of all the ranks. The problem is whenever I change any of the individual indicator's weighting it obviously affects the country's overall ranking. Is there a way that the model can automatically "re-sort" the overall rankings without me having to manually click on the sort by smallest to largest filter each time?
PS I'm using Excel 2007.
View 3 Replies
View Related
May 23, 2012
Excel 2007.
The first part of this code is fine and completes all the borders.
The second part is to the all the workbook by Data Sort in ascending order starting with
Column C
Then Q
Then column V
But also knowing to search to the last line. I think i might be close but not close enough for this to work.
Sub Macro2()
Dim LR As Long, i As Integer
Dim mysheet As Worksheet
Sheets("Test").Select
LR = Range("A" & Rows.Count).End(xlUp).Row
With Range("A9:AD" & LR)
[Code] .......
View 2 Replies
View Related
May 30, 2012
As of right now these are the steps i do to sort...i click custom sort choose My data has headers and then i select from the drop down list the word FRNAME.
is there any way i can setup a macro to do this for me? i tried recording the macro but it just is recording me choosing the column FRNAME is in. This does not work for me since FRNAME end up being in different columns all the time but will always be in row 1.
View 1 Replies
View Related
May 20, 2014
I ma using exel 2007 and I tryed to use this codes,I need faster to finish this project
Soo I have done only 2 buttons OK and Close the tab works like this I CLICK "Kerko" and then I write the name that I want to search in my Phonelist and when I click Ok it shows me his surname his telephone name and his City prephix
But the next and previous button I cant make them work,soo when I have to click next the name down the name that I first wroted will apear with his surname telepphone name and city prphix,and when I click prevoious will happend the same think but will not apear the next persone but the previous.
View 1 Replies
View Related
Nov 26, 2011
I want to import data from 1 excel sheet to another sheet in excel 2007 by clicking the button which i was created through.
Developer>insert>forum control>button
View 9 Replies
View Related
Jan 10, 2012
I'm trying to work with a user form with a customized SUM button.
What I want is that the user can select a range and then press SUM and it will sum (and store) the range and then the user can click another button to place the sum in any other cell.
Here is the code I have on the SUM button but it fails
Code:
Private Sub CommandButton1_Click()
MsgBox (Application.Sum(ActiveWorkbook.ActiveSheet.Selected))
End Sub
I'm using a userform1.show vbmodeless so the user can click off the form. I tested it being able to work cross workbooks and sheets and I could see where it was returning the activeworkbook/worksheet but I don't understand the range/selected part.
Excel 2007
View 6 Replies
View Related
Sep 26, 2013
My excel version is 2007 and i am on WIN7 64bit
I have a workbook with VBA which was working fine earlier. Lately i have been getting
"Runtime error 1004" Select method of button class failed.
I am adding buttons dynamically in a loop in a sheet and what surprise me is , i go to debug mode when error pops up and it points to below line
MySheet.Buttons.Add(ActiveCell.Left - 5, 25, 20).Select
but my code is running in a loop and i can see that atleast 20 buttons were added and it fails to select when it try to add this iteration. It is completely confusing me.
My entire below code is in a loop
maWrk.Cells(xIt1, yIt2).Select
mySheet.Buttons.Add(ActiveCell.Left - 5, 25, 20).Select
Selection.OnAction = "callMe"
[Code].....
I also notice that when it fails, on select method .. the button was actually added to the sheet with caption/name as "Button 65536" but then fails to select it. What makes the select to fail after adding the button? Could there be anything special with Button 65536?
Is there any better way to code the adding button and setting action and name for excel 2007?
note before entering the loop i am deleting all the shapes with myShape.Delete which name matches "btRun"
View 3 Replies
View Related
Apr 19, 2014
I have managed to create a command button in excel 2007 that performs a macro upon a click. But, after re-opening the workbook, I am unable to right click on the button to recall the properties window.
View 2 Replies
View Related
Jul 24, 2012
I'm trying to sort all .xls files in a folder by modified date. I want most recent at top because then I will be cycling through and using the most recent version of files that have similar names.
Excel 2007.
The code I have so far is this:
Code:
Sub autolink()
Dim folderPath As String
Dim FileName As String
Dim wb As Workbook
[Code]....
But I need something before it sort the folder by the modified (or better creation date) because there are several files with similar names. I know know, I could put a date in the file name and look for that but I don't control the naming of the files.
View 7 Replies
View Related
Sep 5, 2013
I have a file that contains detailed sales information for each sales person. It typically contains over 20k records and the managers find it difficult to look up their sales people.
Currently it is subtotaled for each sales person but there are about 450 sales people across the country and it's not easy to use.
I have seen other Excel files that use buttons and I am wondering if this might be the solution to this issue. In other words, can I create a button where the managers can just click it, key in their sales person's name and get at the records easier? If so, how does that work? How I could make this file more user friendly.
View 9 Replies
View Related
Aug 2, 2013
We just upgraded to Excel 2007 from Excel 2000 and have run into a challenge relating to labeling a form command button. It appears that the length of text for a command button label has been shortened to 31 characters when setting the name using VBA. No such limitation shows up when I manually create such a button.
Following is the code that used to work to create the button and label in VBA (Excel 2000):
VB:
ActiveSheet.Buttons.Add(2.25, 13.5, 443.25, 17.25).Select
Selection.OnAction = "PatientSelectedButton"
Selection.Name = "CheckFormButton"
[Code] .....
If I change the string I want to use for the label to 32 characters, or less, this code works (Excel 2007).
VB:
ActiveSheet.Buttons.Add(2.25, 13.5, 443.25, 17.25).Select
Selection.OnAction = "PatientSelectedButton"
Selection.Name = "CheckFormButton"
[Code] ....
I have to admit that this is the last item that I thought would break!
View 4 Replies
View Related
