How To Exit From Userform Initialize

Jun 5, 2013

I have two userform combo boxes, the second follows up on the results of the first.

The second Combo Box looks for incomplete fields and provides them in a drop box. If the data the second Combo Box is looking at (This is different data than the first Combo Box is looking at.) is complete it updates the field, if not then it adds it to the drop down list.

My problem is this, if it finds everything updated and nothing is added to the drop-down list, how do I exit? I just want a complete break where all programming ends.

I am in the Initialize subroutine and I have tried Exit Sub and it still brings up the user form.

View 3 Replies


ADVERTISEMENT

Userform Loads Combobox Values Upon Userform Initialize

Oct 1, 2009

I have one userform that loads combobox values upon userform Initialize. Though through a second userform changes can be made to anotherworkbook this workbook is saves any changes. when i close the second userform i need to rerun the 1st userform Initialize event to update the combobox's incase changes have been made.

View 5 Replies View Related

UserForm Initialize Code Closes UserForm

Jul 3, 2004

When I run the userform initialize procedure to reset the values in text boxes and the like instead of resetting like it should, now it closes the userform completely and then won't allow me to show it again, what could be the problem?

Private Sub UserForm_Initialize()
Me.MultiPage1.Value = 0
TextBox3.Value = ActiveWorkbook. Sheets("Sales Invoice"). Range("G15").Value
Dim hWndForm As Long
Dim hMenu As Long
hWndForm = FindWindow("ThunderDFrame", Me.Caption) 'XL2000
hMenu = GetSystemMenu(hWndForm, 0)
DeleteMenu hMenu, SC_CLOSE, 0&
End Sub

The Dim stuff down is to gray out the x button, there are also some module level declarations to go with that...

Private Declare Function FindWindow Lib "user32" Alias "FindWindowA" (ByVal lpClassName As String, ByVal lpWindowName As String) As Long
Private Declare Function GetSystemMenu Lib "user32" (ByVal hWnd As Long, ByVal bRevert As Long) As Long
Private Declare Function DeleteMenu Lib "user32" (ByVal hMenu As Long, ByVal nPosition As Long, ByVal wFlags As Long) As Long
Private Const SC_CLOSE As Long = &HF060

the userform shows when the workbook opens and is then hidden when the user has finished entering values, then when the user goes through the process of being asked to print and save, they are then asked if they would like to create a new record, if yes then it shows the userform again, but the userform is still filled with all the stuff previously entered. I tried using the unload me instead of hiding and that wouldn't work at all, didn't give errors just didn't show the userform either, this at least shows the userform, but now when the user goes to clear the information by initializing the userform again, it simply closes the userform and then it can't be shown again either.

[url]

This is the link to the ZIP, and here are some instructions for setting it up to work.

The contents of this need to be unzipped into a folder called SyntheticShield that is placed in the C: drive that way all paths begin with C:SyntheticShield and then the other folders or files will be referenced correctly. The template I'm having problems with is the SyntheticShieldInvoiceMaker template, when you open it you'll be prompted whether you want to create a new invoice, number is final blah blah blah, say yes, then it will ask if you are importing from the Quotemaker which you aren't say no, it should then show the userform as it should. Then you can go through that process and by pressing either the create invoice or go to template directly whatever, you can hide the userform. Then you press the command button (red) a userform is brought up asking if you'd like to save without emailing, save with emailing or close controls, as for right now, I'm just getting the save without emailing to work the rest is all the same just a few tidbits of code. So click save without emailing, it should then prompt an are you sure message box, click yes it will do some things, then it will ask if you want to print, click no, then it will ask do you want to create a new invoice, click yes, this should then start the process all over again by calling the workbook_open procedure, however, when you go through everything, and click no to the import from quotemaker part it won't show the userform. And at one point it would, but then I couldn't initialize the userform without it disappearing and not being allowed to be shown...I tried putting a command button on the template to show the userform, but it wouldn't do it either.

View 6 Replies View Related

Initialize Userform

Apr 18, 2009

I have the following in a standard module:

Public Sub Timesht()
userform1.Show
End Sub
And this in my UserForm module:

Private Sub UserForm_Initialize()
'//Populate ComboBox1
Sheet1.Range("K5", Sheet1.Range("K65536").End(xlUp)).Name = "CODE"
userform1.ComboBox1.RowSource = "DATA BASE!CODE"
End Sub
I have a named range as "CODE" in my DATA BASE!, sheet1.

I keep getting an error: " 380: Could not set the RowSource property. Invalid property value."

when I type in UserForm1 and arrow down. in turns into lowercase letters.

View 9 Replies View Related

UserForm Initialize Error 13

Feb 17, 2010

The initialization code of a userform I'm using has started causing me 'Runtime Error 13, Type Missmatch' and I can't figure out why. Can anyone see a reason why I may be experiencing this,

Private Sub UserForm_Initialize()
'Get Last Entry
Dim countnonblank As Integer, myRange As Range
Dim SDate As Date, SDateRange As String, EDate As Date
Dim SDateString As String, EDateString As String, DirString As String

'count cells with data in them
Set myRange = Sheets("textfilemerger").Range("A:A")
countnonblank = Application.WorksheetFunction.CountA(myRange)
'decide if data is present or not
If countnonblank = 1 Then.............................

View 9 Replies View Related

Userform Won't Initialize - Could Not Set List Property

May 31, 2013

I have a user form called frmAddRepresentative. Under the Initialize event I have the following code.

Code:

Private Sub UserForm_Initialize()

'This procedure runs when the frmAddRepresentative form 'is initialized. The procedure sets the repInformation
'sheet as the look sheet sends the focus to the combo box 'used to enter the name and updates the combo list

Set WS = calcRepInformation

UpdateComboLists
Me.cboRepName.SetFocus

End Sub

I am getting the following error: Could not set the List property. Type mismatch. I have the exact same code on other sheets and it works fine.

View 3 Replies View Related

Set Focus To TextBox On UserForm Initialize

Mar 7, 2008

I am trying to SetFocus on a single textbox in a simple form. I am not sure if I am doing it right.

Private Sub UserForm_Initialize()

' On Error Resume Next

' Dim rheadings, cl As Range
'
' Set rheadings = Worksheets("CONTACT").Range("A1:F1")
' For Each cl In rheadings
' Me.cbxSearchWhere.AddItem cl.Value
' Next cl

With Me
tbxSearchCrit.SetFocus
End With
End Sub

Kind regards, Mentor Auto Merged Post Until 24 Hrs Passes;Hi: I answered my own query - just commented out the setfocus instruction and it defaults to the first, and only, textbox by default

View 2 Replies View Related

Creating A Checkbox On Userform Initialize And Then Using It In A Later Code

Jan 22, 2010

I have a userform that creates labels and checkboxes for those lables on the initialize event based on an if statement. I would keep getting an error on a line where I try and use the name of one of those created checkboxes of "variable not defined" as if it hasn't been created, but it was.. Here is the code for the creation:

'Option Explicit
Private Sub UserForm_Initialize()
'dynamically add the tickers and funds based on if there is any data inputs for them.

'declaring variables
Dim lbl As MSForms.Label
Dim i As Integer
Dim x As Integer
Dim newcheckbox As MSForms.CheckBox

'selects the summary page
Sheet1.Select

For i = 7 To 65
If Cells(i, 3) "" Then..................

View 9 Replies View Related

Set Up Multi Page To Mimic Userform Initialize

Aug 2, 2007

I have a userform that has a multi page on it with 4 pages. I notice that there is no way to have the individual pages be set to a click event- or none that I see anyways.
What I am wanting is for a series of events to happen based on what page the user chooses from the four (like a userform initialize type event).

View 4 Replies View Related

Userform Exit Macro

Mar 23, 2007

I a macro (Main) I start a userform (FrmMenu.show).
This userform has a cancel button (CmdCancel). When the cancel button is activated I want the macro (Main) to stop running.

View 9 Replies View Related

Exit Button On Userform

May 13, 2006

can i remove the exit button from a userform

View 2 Replies View Related

Exit Excel After Save From Userform

May 20, 2013

I'm trying to solve when hitting the Save/Close button on my Userform.

Give the User the option to Save As the toolGive the User the option to either exit or return after Save AsIf Exit - hide all but the first worksheet (in case they open with Macros DisabledClose/Exit

My current issue is when I click the button and choose Exit Yes then the form and workbook close, but Excel is still open. Is there a way to have Excel fully close if no other workbooks are open?

Code:
Private Sub cmbSaveAs_Click()
Dim sFilename

If MsgBox("Save the file?", vbYesNo) = vbYes Then

sFilename = Application.GetSaveAsFilename(fileFilter:="Excel Macro-Enabled Workbook (*.xlsm),*.xlsm")

[Code] .........

View 2 Replies View Related

Exit UserForm Private Module

Dec 15, 2006

I would like the users to be able to exit the whole module via double clicking the form. When the form is double clicked, the double click event appears and I am wondering how to put code into this procedure which exits the whole module.

View 3 Replies View Related

Exit Sub When Press Cancel Button On Userform?

Mar 22, 2014

i have a userform with label, textbox, ok and cancel buttons.this userform is to prompt users for password.

i use select case for capturing the password entered.

case 1 is correct password

case 2 is blank password which is vbnullstring

case 3 is wrong password where i use case else

when i click on cancel button, it will be detected as case else. cancel=true for my cancel button wont work.

i think the logic is to put an IF statement before SELECT to capture if the cancel button is clicked.

View 2 Replies View Related

Exit Function- The Result Returned To Me And Exit (all) Open Functions

Apr 24, 2009

I would like to call upon a function until a certain criterion is fullfilled. Then, I would like to have the result returned to me and exit (all) open functions. For value1 = 1 and value2 = 10 I expect value1*value2 = 100. Instead, the routine returnz zero. What is the logical flaw in the code below.

Function testfunction(value1, value2)
If value1 = value2 Then
'Calculating the difference
testfunction = value1 * value2
Exit Function
ElseIf value1 < value2 Then
value1 = value1 + 1
Call testfunction(matrix1, matrix2)
End If
End Function

View 9 Replies View Related

Userform Textbox Event That Fires After I Exit The Textbox

Feb 2, 2010

I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.

I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.

View 11 Replies View Related

How Do I Initialize A ComboBox?

Nov 12, 2008

I figured out how to populate the ComboBox, but I have to manually step through the code to do it. How do I get it to populate the values when the spreadsheet is opened?

Then, what I want to do is have the cell formula depend on one of two selections in the ComboBox.

Here's my code for the box.

View 9 Replies View Related

Initialize A Variable

Jun 11, 2008

Option Explicit

Dim mdNextTime2 As Double
Dim mdNextTime1 As Double
Dim mdNextTime As Double
Dim myCount As Integer
Dim myC As Integer
Sub
If (myCount Mod 5 = 0) Then
end IF
end Sub

Now, when myCount is multiple of 5 it should go inside that loop.
Instead it goes inside immediately, also when myCount = 0
So I decided to initialize myCount to 1.
But the strange thing is that I don't know how?

If I write:
Dim mdNextTime2 As Double
Dim mdNextTime1 As Double
Dim mdNextTime As Double
Dim myCount As Integer = 1
Dim myC As Integer

Or....................

View 9 Replies View Related

What Does # Indicate When Initialize An Integer

Jun 15, 2009

While reading the book "VBA and Macros for Excel", I can not understand the following
Dim concat As Variant
concat = 0#

What does the # indicates?

View 13 Replies View Related

ListBox Initialize Macro

Feb 6, 2009

I found the follownig on this forum (many thanks), and altered it to suit the workbook but how do I get it to delete duplications and sort ascending?

View 11 Replies View Related

Declare And Initialize An Array?

Mar 23, 2009

I am running into the error, "Procedure too large". I know I need to break the range down into Arrays, so how can I hard code the values into an array? I cannot find an example to follow. Ranges: D:E,K:L,O:P,....etc. I know I can break the rows up into an array too, but one thing at a time. Here is an example of the range for D:E.

View 2 Replies View Related

Incorrect Optionbutton Value On Initialize

Oct 3, 2006

I have a userform on which there is a frame containing 8 option boxes. After a query, the results are displayed in the form. If I have a value of 1 in a cell, optionbox1 is checked; a value of 2 checks optionbox2, etc. It works great EXCEPT when first initialized. At that point, it checks the last optionbox, even if the number is 1. I have built a next and previous feature to scan the data, and when I return to the first entry, the correct box is checked. I tried coding blanks into the fields prior to populating them, but I still get the same results. Is there some explanation available so that I may remedy this? I'd really like the first piece of data to be correct.

View 2 Replies View Related

Declare & Initialize A Variable As Global Using Vba

Feb 10, 2009

how to declare&initialize a variable as Global in vba?

I have a variable ,
listGroup=Array("aaa","bbb","ccc")
now i am using this variable for 3 different functions. so what i am doing is wrote the same code to 3 functions, so how i can declare&initialize this variable as global and access to all functions.

View 9 Replies View Related

Populate Multiple Combobox On Initialize

Jul 5, 2006

I have a userform that contains 5 combobox. The userform will be initilized on sheet1 and the data is on sheet3 in the following columns:

Combobox1 = sheet3 ("A3:A6000")
Combobox2 = sheet3 ("B3:B6000")
Combobox3 = Sheet3 ("C3:C6000")
Combobox4 = sheet3 ("D3:D6000")
Combobox5 = sheet3 ("E3:E6000")
Combobox6 = sheet3 ("F3:F6000")

When the userform is loaded, I want the data in each range to be available in the dropdown for each respective combobox. It would be great if spaces can be removed from each list, but from what I read, this may be an issue.

View 9 Replies View Related

Format Multiple Textboxes At One Time On Initialize

Feb 6, 2014

I have a total of 648 textboxes on my form. Some of the textboxes allow for char values, some numeric and some monetary. The problem I am running into is with the monetary. I am trying to say on initialize, I want to autoformat 208 of these textboxes to $0.00 and when the users puts in an actual amount it changes to $100.00 or whatever the amount. It would be ideal to just have the textbox blank and when the users puts in something it is formatted automatically to $100.00. Just like I would if I were formatting an Excel column or cell. Here is my code so far: (hopefully no typos in code. Cannot copy and paste as using home computer. My work computer blocks the excelforum site.

[code]....

View 6 Replies View Related

Initialize Toggle Button Value When Opening Workbook?

Jan 10, 2010

When opening a workbook, I'd like to set a Toggle Button's value to TRUE. I already have code Workbook_Open() procedure which resides in the ThisWorkbook module. This Workbook_Open() procedure already does lots of other things. I would like to add code in Workbook_Open() that would set the Toggle Button's initial value (TRUE).

The code for the Toggle Button resides in one of the Sheet modules (not the ThisWorkbook module). I attempted to set this toggle button value using the following code (see row 10), but it does not pass the compiler due to not being a defined variable.

View 3 Replies View Related

Text Box Forms Combobox Initialize Private Sub

Jun 18, 2012

I am trying to work out how i can run a macro on an 'initializing event'...which is caused by when I click on a certain Forms ComboBox.

This drop down box is a shape and it is called "Drop Down Box 11"

so was hoping to write something like

The box is linked in with Cell E56

so have put in my code as

VB:

Private Sub Worksheet_selectionChange(ByVal Target As Object)
If Target.address = "$E$56" Then range("f56").value = "Yes" etc...

but it still allows me to click on the combo box and change my pick but it still doesn't initialize the event.

View 2 Replies View Related

Executing A Program, Initialize Or Open An Application

May 18, 2007

When running a script within Excel, is there a way to cause the script to initialize or open an application other than Excel? For instance: If I desired to have the script open 'C:program.exe' is there script available for this?

View 3 Replies View Related

Click Event Fires But Doesn't Work Under Initialize Procedure

Jun 18, 2014

Why this code DOES NOT work:

[Code].....

But this one DOES

[Code] .....

Why would a click event execute but the same code doesnt fire on a initialize event?

View 3 Replies View Related

Exit Sub Alternative

Aug 3, 2009

Exit Sub alternative. I have the following

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved