I'm trying to print the list of dates for the particular month . where the start date and end date is given by the user through user form.
I have written the below code to generate the dates. but the for loop still continues even when the start date is greater than the end date.
For example if i enter the startdate as 06/01/2014 and enddate as 06/30/2014. the for loop continues and displays date for all 40 days instead of stopping when the condition is met.
I have some code (probably a little inefficient, but still) that should delete any rows that contain nothing in column V. My problem is that it only deletes 1 row at a time:
Dim c As Long Dim Limit As Long Limit = Cells(Rows.Count, 11).End(xlUp).Row For c = 2 To Limit If Cells(c, 22).Value = "" Then Cells(c, 22).EntireRow.Delete xlUp End If Next c
My problem is that I want to loop through a directory that contains csv files. The directory is dynamic so everytime could be a different number of files inside. I want the loop to go through each file and check if that file exists. If it doesn't to print a message that this specific files doesn't exist. Until now I got the following code:
[Code] .........
I guess I should somehow place the counter j inside the Dir path in order to check if everytime time the file[j] exists?
I have the below code that loop through a list and hides rows that doesn't contain a value of the Textbox, it works fine but becomes very show where number of records it passed through the loop is greater than 1000, is there more efficient way of writing this code?
Number of cells to loop through is 10000 Max
PHP Code:
Private Sub tboxSearch_Change() LastRow = Cells(rows.count,5).end(xlup).row For Each cell In Range(Cells(55, 5), Cells(LastRow,5)) If InStr(UCase(cell.Value), UCase(tboxSearch.Value)) = 0 Then Rows(cell.Row).EntireRow.Hidden = True End If Next cell End Sub
for each value in column "h" if value = "k" then check the respective value in column "b" = null loop should iterate for entire column then print its null
My code is meant to ensure a string in a cell begins with three letters and ends with 5 numbers. It seems to work, but how can I exit the loop and go to the message box once the boolean variable is set to true? I was hoping to avoid using labels. Also, I would appreciate any suggestions in compacting the code if possible, but without using CreateObjects".
Private Sub Worksheet_Change(ByVal Target As Range) If Intersect(Target, Range("h17")) Is Nothing Then Exit Sub
Dim Ls As String Dim i As Integer, z As Integer Dim MyString As String Dim MyClVal As String: MyClVal = Target.Value Dim MyBL As Boolean: MyBL = False
I am writing a very simple Do While loop where VBA searches for the first nonempty cell in a column starting from cell C3. The error I get is "Overflow". I suspect that when all cells are empty it goes down the column till the last cell, which is around 65,000. How can I put a restriction on this loop? I need the search to be restricted to range C3:C95, because my data ends in row 95. In other words, the code essentially should do this: go from cell C3 to cell C95 and search for the first nonempy cell in this range. When you find the first nonempty cell, assign name "x" to this first nonempty cell.
I have a piece of code that basically performs a calculation and prints one value to a worksheet at the end. This code is part of a larger simulation model and by the end of the model this piece of code is executed thousands of times and thousands of values are printed to the worksheet. However, at the start of that piece of code there is an if statement which influences the end result. My question is, how to identify which end values were calculated using each method in the for loop.
For example would it be possible to highlight the cell (in which the value is printed) in red if the
VB: num= 0
Part of the if statement was used and highlight the cell (in which the value is printed) in green if the
VB: num= 1
Part of the if statement was used?
This would identify which values were calculated using each method.
VB: 'Change in Model set prior value If ws1.Range("D" & Rows.count).End(xlUp).Row < 2 Then num = 1 counter1 = counter1 + 1 sh1.Range("g3").Value = counter1
i have a set of data as below and wish to delete ENTIRE ROW if cell is the same but keep the first entry when code comes to it..ie in the data set below excel would keep first row and delete 2nd,3rd,5th, 6,7,8 and then go to next unique identifier which would be AU0000LIFHB3 this would not be deleted as it is unique the would proceed to AU300GPTC011. this process would then stop when no data was available
I have a piece of code that put a check in all checkbox in column B from row 5 to row 50 but in column C, I have data from row 5 to 38. I want the macro to stop at row 38 in column B. When the cell in column C is empty stop putting checks in column B. How can I make this macro Check all checkbox down column B and stop when column C is empty. How do I add a loop to stop when the cell in column C is empty?
Private Sub CommandButton1_Click() Dim CB As Variant For Each CB In ActiveSheet.CheckBoxes CB.Value = False Next End Sub.......
Code below. I need it to NOT run if the sheet week2 doesn't exist. Currently it gives a runtime error '9' out of range. This is due tot he sheet not being present because sometimes it is not generated.
Code:
Sub RemoveColWeek2sheet() Dim ColNo As Integer Dim rng As Range Set rng = ThisWorkbook.Sheets("Week2").UsedRange
I am trying to perform a calculation in a cell that leaves the value 0 if before Feb 2014, changes to the value of another cell in Feb 2014 and leaves the value unchanged if after Feb 2014. I can get to the Feb 2014 value but after that month the value changes to 0.
The Cell formula that I am trying to use is as follows:
I would like to try and achive a conditional format that will require a lookup function. when the condition is met it places Yes or No into a cell and changes that row colour to red for the NO condition. and after 10 days from now the rowcolour is removed.
With Sheets("regrade pharm_standalone") For Each r In .Range("standaloneTerritory") If r.Value = "X101" Then r.EntireRow.Copy Sheets("X101").Range("A1").End(xlDown).Offset(1).PasteSpecial xlPasteValues End If Next r End With ------------------- I need to repeat this loop for values from X101 to X151. In all cases, the sheet name is equal to the value I'm looking up (eg: value = X102 goes to sheet X102).
I have a named range called 'territories' that contains the list of X101 -> X152.
I'm hoping to make the code perform the loop for each of the territories without my having to copy & paste and change the 'X101' 51 times as this would seem a rather silly thing to do!
So I have one sheet that needs to pull data through to another sheet (which is a stats summary)
I have a drop down list containing 4 options all of which have to be counted separately on the stats summary sheet. However I only need them counted when a value is input in another cell in that row.
For example: I select option 1 from down down menu, but I only want this to be counted on the stats page when I enter a date in the "date" cell.
Macro which loops through a number of files and calls the same macro in each of them. Unfortunately when I add "Application.Run..." to the code, it no longer loops through the process and instead stops after updating the first file in the loop. If I remove the "Application.Run..." code and add any other code, the loop works fine and it continues through the process repeating all the steps for each file found.
Why it stops after one file when using "Application.Run..." to call the macros?
NB I have a list of path and file names starting in row 8 of columns A and C. Each file in the list has a macro called UpdateS1 and promoupdate1.
Sub C_Run_Loop_Macro() Dim lastRow As Long Dim i As Long
I have working code that returns a row number within a for loop based on parameters I set.
Each time the for loop runs I would like to store this row number, then after the loop has finished, delete all stored rows.
Code: for rowNum = 1 to x (some variable end row number which I already have worked out using End(xlUp).Row) if x = y then *storedRow = rowNum end if next rowNum *
Lines with a * are the bits I can't work out. I've been trying to understand arrays by reading posts on what other people have done, but I can't fit (or fully understand) the reDims, or reDim preserves into my code. I've seen what appear to be quite complex ways involving uBounds and LBounds, but unfortunately I can't see how to use them.
All I want is to simply keep adding a row numbers to a variable, (i.e. row 2, 5, 20, 33, 120, etc) and then delete those specific rows.
I am looping through each cell in a range and I would like to loop in reverse order.
Dim CELL As range Dim TotalRows As Long TotalRows = Cells(Rows.Count, 1).End(xlUp).Row For Each CELL In Range("C1", "C" & TotalRows) CELL.Select 'Code here to delete a row based on criteria Next
I have tried:
For Each CELL In Range("C" & TotalRows, "C1")
and it does not make a difference. I need to loop in reverse order since what I am doing in the loop is deleting a row. I am looking at a cell and determining its value. If the value is so much, then the row gets deleted. The problem is that the next row "moves up" one row (taking the pervious cell's address) and therefore the For Each Next loop thinks it has already looked at that row.
I have some numbers in a column that I need to copy 12 times (each one) into another column. The problem is that I got like 200 records that will be converted in 15000 aprox. I've uploaded an example of what I need,
I'm looking to return the values in column A adjacent to the cells in Column B equal to "Y". The kicker has been returning only the cells where the condition is true. Column C displays the desired behavior.
The closest I've been able to get is with a simple IF statement but I'm pretty sure the answer is a far cry away from there and likely requires an array formula. I'd prefer not to use VLOOKUP or OFFSET but will if the alternative is very complex.
I have a workbook that contains, say, 50 worksheets: the first two worksheets summarise the data and are static in that they don't move position. However, the next four worksheets contain certain data for any given month. Each time a new month comes along, say, November, I insert four new worksheets after the two static ones as a result October's four worksheets are simply moved down the line in terms of worksheet order.
I need a macro to refer to the first six worksheets only (not the other tabs). I opted for index referencing for each worksheet, ie one - six. Now within these six worksheets in any given month, I need to sort the data by a certain column. The problem: in sheets 1,4,5 and 6 I need to rank by column E, but in sheets 2 and 3 I need to rank by column C. I have stepped through the code, which works for sheets 3-6, but doesn't seem to refer to sheets 1-2.
Sub WorksheetLoop() ' ' Loop through an indexed number of worksheets; _ ' & this ensures that the worksheet range is dynamic _ ' and is able to adjust when new sheets are added/removed, etc. ' 'Dim ws As Worksheet Dim i As Long Dim ws As Worksheet
I need cell (O4) to display days overdue or days remaining on an assigned task based on subtracting due date (M4) from todays date, but only perform days subtraction function if (M4) is not blank and only if task complete cell (N4) is less than 100.
Have the conditional blank cell figured out, but nesting another condition for the less than 100 complete cell. So in other words, I don't want cell (O4) to subtract days and display any error, irrelevant data if there is not any due date entered or the task is entered as complete...
I've worked on a solution for this thread (http://www.excelforum.com/excel-prog...-automate.html) but have been mentally challenged with how to avoid changing the loop counter in one of the loops I have used to resort an array of file names from the getopenfile dialog.
The aim of the shown code (see post 12 of the above link for attached file) is to check if the file containing the macro is included in the array returned by getopenfile while sorting the array of file names, and if so, moving it to the end of the array for "deletion" by redimming the array to exclude the last item. This problem of the open file being selected in the dialog may never arise, but... as the OP's request in the other thread was to allow two-way comparisons between numerous files, I've considered it likely enough to test for.
Here's the code I have settled for esp between the commented lines of hash symbols, which does change the counter (see the commented exclamation marks), but prevents an infinite loop (on my second try!) by using a second boolean flag of "HasCounterBeenChanged". Is there a better way of doing this? Or, alternatively (not in my thread title), is it possible to prevent the active file being selected through one of the arguments in the getopenfilename method?
I am working on some code that loops through a column of number values. Whenever it encounters a number value and a blank cell in an offset column, it places that number value into an offset cell (forming a separate column to be compared to another column in a separate sheet). I would like to take all the values in that new column and begin placing them in a new column in a separate sheet adjacent to another table. Most of the time, these values should match the adjacent values in the separate worksheet. However, if they don't match, I would like a new row to be created for that mismatched value.
For example. This is the first worksheet. So far, my macro loops through the column with rows 1-5. It looks in the offset cell(0,2) for Isempty value and then places that value into the offset cell(0,6)
For Each loop can be instructed to loop starting the bottom of the range. I know that a For To Loop can handle looping from the bottom up,
Sub Filterout() Dim c As Range Dim rng As Range Dim i As Long Dim lrow As Long Dim counter As Integer lrow = Cells(Rows.Count, 3).End(xlUp).Row Set rng = Range("c2:c36")
For Each c In rng If Left(c.Value, 1) "~~" Then c.EntireRow.Delete End If Next c
it seems like the first instance of the code is running the way i want it to run, but when it starts with the second instance, it does the first search and copy, but it seems like the nested loop is being ignored.
am i doing something wrong?
dan ========================================================== Thanks to Aaron Blood for the find_range function. i also poached the lastrow function from somewhere on ozgrid, but I cant remember the name of the poster. ==========================================================
Sub new2()
Dim Org_Area As Variant Dim Item As Variant Dim Copy_To1 As Variant Dim Cell_Ref As Variant
Cells C9, C10 & C11 contain variable values so the user can choose from Groups A, B, C, etc using a data validation list. For any one variable this works fine. What I'm struggling with is when the user selects "All" from the list. "All" doesn't appear in the data so the formula as written doesn't recognise it and fails. What I'd like it to do is recognise "All" as meaning all entries.
