CSV Export Of All Sheets In Workbook
Feb 10, 2010
I've found several posts that talk about this but none are quite what I'm looking for and I don't understand them well enough to modify to my needs.
I have a workbook with several sheets. I wish to
1) save the workbook as is (you'll see why)
2) export each sheet as "worksheetname.csv: to the same folder as the original workbook
3) Close the workbook without saving it becasue I've discovered that if you then save it it overwrites the last CSV file I just created with the info reformatted in a goofy, unusable way (hence the save in the first step
View 9 Replies
ADVERTISEMENT
Apr 28, 2009
I use this code to export sheets to a new workbook.
View 5 Replies
View Related
Oct 20, 2011
I have seen many examples of trying to export sheets using VBA but cant seem to find a solution that works.
Essentially I have a sheet within a workbook which I wish to export and be offered to give it a file name. A pre-specified location is fine so I dont need anything fancy like an API etc....
View 3 Replies
View Related
Aug 4, 2014
I have a large workbook in which each sheet contains either a single table (large or small) or a chart (various types and sizes). Some of the sheets also contain imported icons and shapes. I wonder if it is possible to export each of these worksheets as separate images? The macro should be able to set the boundaries of a table or a chart to export (either itself or by using the coordinates which are given in two cells – eg. A30=A1, L1=F8). Actually all tables and charts will always start at A1.
Ideally it should just take the coordinates of a range to be exported from single cell (eg L1=F8) - the fist being always A1 - so as to minimize the probability of it getting the boundaries wrong. I have attached the sample worksheet with a few tabs.
And yes - each worksheet image would need to be saved with the name of the worksheet.
Dexport sheets as images.xlsx
View 8 Replies
View Related
Feb 7, 2009
I have found numerous entries for Saving Based on Time (which I'm using) and others for Exporting to CSV. But I'm not sure how to combine them or if it will do what I really want. I have a workbook with 6 tabs (each one with a name like "CODE_MEETINGS" or "CODE_CONTACTS"), I would like to export a COPY of each of them to their own CSV file and overwrite it each time. Basically, this will get me away from using the Save Based Ontime VBA in my master workbook, as David says, "it's not a good idea and can save errors." The problems I think I would have are:
1. I want one sheet per saved CSV file (using the name of the sheet/tab)
2. I need the top row (title fields) of each sheet removed (or I need to be able to set a selection per sheet)
3. I need it to be automatic without user intervention (when I save out manually, I get prompts about multiple sheets, features not supported and overwriting).
Right now my code for just autosaving is: workbook
Private Sub Workbook_BeforeClose(Cancel As Boolean)
On Error Resume Next
Application.OnTime dTime, "SaveMe", , False
End Sub
Private Sub Workbook_Open()
Application.OnTime Now + TimeValue("00:15:00"), "SaveMe"
End Sub..................
View 7 Replies
View Related
Mar 28, 2007
I borrowed the macro below from this forum. My formulas in the sheets I'm copying refer to other sheets that I'm not saving. can someone tell me how to change it so that it copies values only to the new workbook as I'm only saving it for records purposes and some cells are saved with #REF errors.
I'm guessing there's a spot where I should type .Value ? Copy.Value doesn't work.
View 9 Replies
View Related
Dec 30, 2012
I'm trying to export a table to a csv file
Check out this screenshot:
[URL]....
So I'm just trying to export B2 through the last Row in D (B2:Dlastrow)
Perhaps it's having a problem because the data is being populated with a vlookup from a different sheet?
Here is the workbook(pardon the size, I just wanted to include it in its entirety)
Track.xlsm
Take a look at sheet ""Deactivate"
Here is the code I'm using
Code:
Sub Images1()
Dim LR As Long
Application.ScreenUpdating = False
Application.DisplayAlerts = False
With Sheets("Deactivate")
[Code]...
[URL]...
Export Table to CSV (with code & workbook)
View 1 Replies
View Related
Dec 8, 2006
I have a rather large workbook with around 10 sheets. i want to setup a 'export' button on this workbook that will allow a user to save raw data from this workbook into another excel workbook and an ' import' button that will allow user to import raw data and use the existing formulas/links from this large workbook.
As in sample file, i want to be able to export/import all the cells that are orange in colour (in my actual file, all raw data cells are not actually orange, thought colour coding it would make my problem easier to understand)
I was thinking around these options:
1) Copy and then PasteValues from the large worksheet into another workbook for exporting and same idea for importing
2) For all raw data, copy out all the values and put their corresponding addresses in another excel sheet. e.g. column1: Sheet1!$A$1, column2: value
and import it in by reading the address n value.
View 9 Replies
View Related
Apr 21, 2007
I have found code by John Walkenback
I need to adapt it to allow several worksheets to be exported to a workbook .cvs .Then imported back into the original workbook including all blanks.
I have included the Walkenback workbook and a test workbook that I have been playing with.
Just about reached the brick wall with my abilities on this problem
View 4 Replies
View Related
May 24, 2014
I have a workbook that contains 3 sheets. What i am looking to do is:
1. Use the names in Sheet 1 (Column A) and find the names on Sheet 2(Column E).
2. If there is a match, put the whole row that contains the match on Sheet 3
View 14 Replies
View Related
Jan 2, 2012
I have a spread sheet called "Quote" I have 3 command buttons in this worksheet.
"CommandButton1_Click()" is "Create Quote"
"CommandButton2_Click()" is "Home"
"CommandButton3_Click()" is "Create Client Quotation
I would like to be able to add another command button to export the worksheet "Quote" to a new work book and then automatically print it to a PDF naming the file from the next available quotation number in directory I:Quote register.xls. is it possible to find the next available number by finding the next blank cell in column B in the above directory I:Quote register.xls?
I would like it to copy the Create Client Quotation Macro to the new workbook if possible. The other 2 command buttons are not relevant after the export.
View 7 Replies
View Related
Aug 18, 2008
Export ALL modules, forms, objects etc in one workbook to another and if that can't be done than at least all modules and/or objects. This is so I can change code but leave the formulas/values etc in the main excel sheets. Basically it would need to delete all VBA code and copy, I guess from a text file to insert the new code, at least for modules and objects. Forms, I don't know how that can be done?
View 9 Replies
View Related
Jun 7, 2008
I would like to know if their is a way to export about 100 Named Ranges from 1 workbook to another. I work with about 20 pricing templates and have just been tasked to start tracking about 100 of the fields out of each template. I named about 100 ranges on one of the templates and want to name those same fields on the other templates with the same names so I can build a macro to just pull all of those ranges from the different templates into a metric tracking workbook. My question is if there is a way to name those same ranges on the other workbooks w/o doing it manually. If I copy and paste or copy the worksheets from one book to another I will spend just as much time deleting links from the other workbook as well as updating the contract information.
All of the Ranges are Sheets that are named exactly the same and in the same exact cells on each sheet.
View 3 Replies
View Related
Oct 9, 2013
I've been investigating how to use a UserForm in Excel. While I've learned some, I can't quite figure out how to export the data from the UserForm. I want the form in one workbook and have it record a new row in a different, but constant workbook each time the action button is clicked. I have been able to create the form and included the action button, but I don't know what code to assign to the button.
I think I know the important pieces to the puzzle, but I don't know the syntax or how to put them together.
Form Details:
2 Text Boxes (TextBox1 & TextBox2) - TextBox1 is the Employee Name. TextBox2 is the Employee Number
10 List Boxes (ListBox1:ListBox10) - All ListBoxes will return a value of either "Yes" or "No".
1 Action Button (RecordCommand)
Export Details:
File Path Where the new workbook will be stored: E:HR Team Audit
File Name of Workbook where form data will be stored: "HR Audit Record Workbook.xlsx"
Column Headers will be in Cells A1:L1 of that workbook
Below is the code for the Text and List Boxes:
Code:
Private Sub UserForm_Initialize()
With TextBox1
End With
With TextBox2
End With
With ListBox1
.AddItem "Yes"
.AddItem "No"
End With
[Code] ........
View 6 Replies
View Related
Oct 11, 2007
I am trying to create a template which when filled out will automatically transfer multiple cell information to an excel database, and everytime the template is filled out - transfer the new information to a new row (sequentially) - I do not want the info to remain on the core template - it needs to be blank after every use.
I tried the template wizard - which worked to a degree but I was unable to move the database file to an alternate location and still have it work - I was also unable to alter the code created by the wizard due to password protection.
to sum up I need a template that updates numerous cells on a database in sequential rows that can be transfered to another computer / location.
View 4 Replies
View Related
Jan 5, 2008
(The attached workbook will provide a more obvious explanation.)
I am building a 'reporting' workbook. It has 3 tabs.
i. the first I will use for buttons to call macros (no help needed)
ii. the second tab is 'REPORT' - where data from the third tab ('DATA') will be collected/organized -based on a textual value in column D - before being exported into a seperate workbook (finalized report).
iii. third tab is 'DATA' - this sheet will contain all the data that will provide info for reports
Presently, the 'REPORT' tab has been manually filled in with data from 'DATA' tab - I did this thinking it would provide better explanation here; take note that values in column D will be gathered via vlookup to other worksheets not included her.
Here is what I want to do:
1. goto 'DATA' tab, find the first PLATFORM (column D) text value
2. goto 'REPORT' tab, put that text value in B2
3. go back to 'DATA' and in each row that the same PLATFORM is present, copy over the corresponding info to the appropriate cell in 'REPORT' tab
4. once I've collected all the rows for one PLATFORM - export and save the 'REPORT' worksheet to a seperate workbook in 'C:REPORTS' and close
5. clear the range where data is being written in 'REPORT' tab ("A5:H60000"), then go back to 'DATA' and get the next PLATFORM (column D) text value - enter it into B2.
6. fill the range ("A5:H60000") with the corresponding values from 'DATA' based on the new PLATFORM name...
View 3 Replies
View Related
Mar 3, 2008
I have built a simple little logger forlogging insurance policies set up without permission, at the moment it logs all data in sheet2 of the active workbook. What I want it to do is when submit is clicked is to export and save the data to a seperate (central) workbook to collate all entries and not to save it in the active workbook. I've inlcluded the file and the code is as follows;
Private Sub CommandButton1_Click()
Dim ws As Worksheet, lRow As Long, Str As String
Set ws = Sheets("Sheet2")
lRow = ws. Range("A" & Rows.Count).End(xlUp).Offset(1).Row
'____error handling______
If TextBox1.Value = "" Or NullString Then
MsgBox "Ooops, it seems you haven't entered a policy number!", vbCritical, "Error..."....................
View 2 Replies
View Related
Aug 18, 2006
I was handed a workbook that is password protected. The worksheets are not password protected. Because the workbook is protected, I cannot add or delete worksheets.
I figured that I could get around this by copying the worksheets to another workbook, but I can't even do that. Naturally, no one remembers what the password is.
View 3 Replies
View Related
Jun 5, 2014
I have set of user-form contains with Combox & 2 textbox and to generate report one cmd button
I have 3 different sheet contains report of daily activities ( Dispatch,Closed,Cancel)
If Dispatchcalls Select In Combobox1 ,Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from dispatchcalls Then Save Data Into Excel File As "Dispatchcalls".
If Closedcalls Select In Combobox1 Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from Closedcalls Save Data Into Excel File As "Closedcalls".
If Cancelcalls Select In Combobox1 Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from Cancelcalls Save Data Into Excel File As "Cancelcalls".
"C:UsersmaniDesktopNew folderLenvo_ReportsONSITE CasesVlokupuf" This is path i stored existing 3 file dispath,closed,cancel
View 3 Replies
View Related
Feb 18, 2014
I have a work sheet named "Main_List"...In column D starting with "D2" I would like to list worksheets that I would like to have printed via VBA.
The workbook has several hundred worksheets and I would like to list in column D only worksheets that I would like to print with VBA code.
View 3 Replies
View Related
May 30, 2014
Trying to create a new workbook from another open workbook, then copying all the sheets that aren't called "Summary" to that new open workbook and then saving it. I get a subscript error on this line:
[Code]....
View 3 Replies
View Related
Mar 24, 2012
I want to create a hyperlink to a sheet named "adsf"
I am currently in a worksheet named: "62b Arcus"
I want the hyperlink to be set by grabbing the name from another cell.
For example, In cell h7, I have the text: adsf
In cell g7, I want to place a formula such as: =HYPERLINK("adsf!")
Except, instead of this, I want: =HYPERLINK("h7!")
In this way, i want it to hyperlink to a sheet name based on the text that is in h7.
But neither of these formulas work. Both say the following: "Cannot Open the Specified File"
After reading up on this I have discovered that I must save the file and include the file name inside the formula.
My file name is: [Maintenance Color Codes of Houses - colour coded2.xlsm] =HYPERLINK("[Maintenance Color Codes of Houses - colour coded2.xlsm]adsf!A1","LINK")
This hyperlink actually works. Yet I have a problem. What if I rename the file. For this reason, I want it to grab the current file name using "filename". I have tried this by the following:
=MID(CELL("filename"),SEARCH("[",CELL("filename")),SUM(SEARCH("]",CELL("filename")),-SEARCH("[",CELL("filename")),1))
This grabs the current file name "Excluding the text outside of the [ and ]. I was able to create this formula myself.
How come I can't replace the part with [ and ] =HYPERLINK("[Maintenance Color Codes of Houses - colour coded2.xlsm]adsf!A1","LINK")
with:
=MID(CELL("filename"),SEARCH("[",CELL("filename")),SUM(SEARCH("]",CELL("filename")),-SEARCH("[",CELL("filename")),1))
These two formulas together would be:
=HYPERLINK("MID(CELL("filename"),SEARCH("[",CELL("filename")),SUM(SEARCH("]",CELL("filename")),-SEARCH("[",CELL("filename")),1))adsf!A1","LINK")
I also want to replace the "adsf" part with a cell number such as h7. So that it says h7!A1","LINK") or in full:
=HYPERLINK("MID(CELL("filename"),SEARCH("[",CELL("filename")),SUM(SEARCH("]",CELL("filename")),-SEARCH("[",CELL("filename")),1))h7!A1","LINK")
This doesn't work either
I know that I have probably created a ridiculous formula for what I am after. I'm almost there but not quite. You may know something far, far more simple.
View 5 Replies
View Related
Feb 7, 2014
I am looking for a code that would copy the data from each worksheet in a given workbook and then paste to just one worksheet within a different workbook. The Sheet names are auto generated when I run this canned report but the naming structure is always the same...the first worksheet is named Repair Details and then the next sheet is named Repair Details_1, the next sheet is named Repair Details_2 and so on for every sheet in workbook. So I would like to copy all of the data(Headers to last cell) and then paste in a worksheet(ex: Master Repair Report.xlsx and the worksheet could be titled Master Repair Details) on a different workbook, then the next sheet would copy from the one under the header to the last record and paste to the same workbook. This process would repeat for every worksheet in the Repair Details Workbook and paste to Master Repair Details worksheet in the Master Repair Report workbook.
View 4 Replies
View Related
Jun 2, 2014
I wrote a code in unshared workbook and it works fine. But when i make it shared i get Run-time error '1004' Delete method of worksheet class failed.
The Deleting of worksheet only occurs once (when the new wb is created) so is there i can unshare and share it back when the process is complete?
View 3 Replies
View Related
Jul 16, 2012
I have been tasked with creating a macro which creates a new workbook wherein each sheet contains the information for one site from the active sheet. The active sheet already has the values sorted by the site such that all information needing to be copied from the active sheet into the new workbook is together.
I.E.
ATL
ATL
ATL
ATL
CEN
CEN
JCK
JCK
etc.
There are 8 different sites on the active sheet: ATL, CEN, DAL, HAR, JAS, JCK, VIS, NOV
The macro needs to find the range for all of the data of each site and copy/paste that data into a new workbook such that ATL would have its own sheet, CEN would have its own sheet, and so on. The data ranges from A:R.
So, for example, the macro would find that the last row with ATL in the "B" column is 6095 and would then copy A2:R6095 and insert that data into the new workbook under Sheet 1.
I had some code that I had adapted to select the range for each of them, but the code loops through the entire sheet (which is 44,307 rows long) for each site making it a quite clunky and very slow step in an even longer macro. Since the data is already sorted, I know there must be a way to have the macro stop searching when it reaches data not equal to the data the row before, however, my experience with VBA is limited, and I have been unable to find a solution. Also, the data does not have to be conserved after being sent to the new workbook, if that would speed up the macro.
View 5 Replies
View Related
Mar 31, 2009
I have a spreadsheet which has all the names of trips from a warehouse, the day that they operate (1,2,3 etc) and the job line allocated to each trip. It looks something like that:
A B C
DAYTRIPCUST
I would like to create a macro that will be creating 7 new workbooks and then in those workbooks as many sheets as the trips. In these sheets, the customers should be displayed.
How do I write it? I could not find how to have a "dynamic choice" in the macro. I.e. not to have the criteria as "1", "trips1" but to choose from the range of inputs that are available.
View 9 Replies
View Related
Oct 17, 2007
I am unsure where to go from here. The sheets are named with numbers 1 thru 100.
With a cell reference "D1" that selects the corresponding page, 1 - 100, I want to select it along with the other sheets in the array and copy to a new workbook.
Dim i As Integer
i = Sheets("I-CF").Range("D1").Value
WB1.Sheets(Array("I-CF", Sheets(i).Name, "Util")).Select
Sheets(Array("I-CF", Sheets(i).Name, "Util")).copy
View 6 Replies
View Related
Dec 9, 2013
DataA.xlsx
I would like to combine sheets A B and C into one sheet so that it looks like the sheet I created manually. I have began the processes using formulas but I am unable to combine the final sheet of data as the rows no longer line up using the same formula.
View 3 Replies
View Related
Apr 22, 2009
I have another query now, similar to the one above. This relates to our Purchase invoice board.
All of our invoices are internally numbered, the info is entered onto the attached spreadsheet. A register, source of all Purchase information. (this sheet was not created by me by the way, its really old and my manager does not want to change it )
I would like to create a spreadsheet of the invoices that i have placed under query, i have set out a simple template at the moment which i use. But i have to input all the info from the invoice on this sheet, I can't help but wonder if the vlookup functon would work on for this.
I would like to enter our internal invoice no into my query spreadsheet and with the vlookup function i would like to retrieve the info from our purchase invoice spreadsheet
Only thing is, our invoice num are continously rolling throughout the year. New numbers are not created for the month, it continues from the last invoice number. However our invoices are filed on a monthly basis (hence the month tabs below).
Is there a way that a lookup function can be retrieve info from several worksheets at the same time in a different workbook?
View 11 Replies
View Related
Nov 18, 2009
I have been sent a workbook which contains a number of formulae that reference hidden worksheets (see attached JPEG).
I cannot work out how to display these sheets? The workbook does not seem to be protected, I can edit and save the visible sheet. Can anyone shed some light on how to view the referenced sheets?
View 4 Replies
View Related
