i have 20 different materials which have codes assigned to them
wh = white
ivory = ivory
db = duck egg blue
etc etc
when i create an order some of the codes will be called up
i want to be able to put them codes plus the description into the worksheet Ideally into the header. if not call a1
I am trying to write a formula which will extract information from a given set of cells. The information format is
XXXX-YYYYY-ZZZZ
What I need to do is pull out the information which precedes the second. so in the above the answer would be XXXX-YYYY. I was thinking of using a mid or left, right formula till I discovered that the # of characters for X, Y and Z can be any length ie they could be
X-YYYY-ZZZZ
XXXX-Y-
XX-YYYY-ZZZZZ
So the formula needs to find the second dash (-) and extract information prior to it.
I am trying to extract unique Data from the information in the output data in the file attached after i have extracted data based on criteria from the database sheet. i have noticed that because i extract data from the database sheet and from there i perform the extraction of the of the unique data , it is not able to extract unique isser name form the output sheet.
View 1 Replies View RelatedIn column A I have various part numbers with alph-numeric characters. In column B I have a similar list. In column C I have the quantities for the part numbers in column B.
What I need is for say a macro or forumla to look at each part in column A and match it with the part in column B and in column D insert the appropriate quantity from column C.
I'm not sure if this falls under say a filter, extraction or search type of function.
How do I Extract information before a sign "/" in a separate cell ?
View 2 Replies View RelatedAll of the information is provided in one cell, which I can not change. If possible I would like to pull the names from the middle only (example: cell d11 only give me Adam Diaz and so on). Once I have pulled out the name, I would to reverse the name (example: Diaz Adam).
d11=ADIAZ01 Adam Diaz (adam.diaz)
d12=AELIZO02 Alejos Elizondo (alejos.elizondo)
d13=BDELUN00 Bobby Deluna (bobby.deluna)
d14=BFOREM00 Bud Foreman (bud.foreman)
d15=BGREGG00 Billy Gregg (billy.gregg1)
d16=CGREEN06 Christopher Greenwood (christopher.greenwood)
d17=CGREEN08 Cheryl Green (cheryl.l.green)
d18=DDOWNS01 Dickie Downs (dickie.r.downs)
d19=DFLORE03 Daniel Flores (daniel.flores3)
d20=DMENDE01 Donald Mendez (donald.mendez)
d21=DMORAL01 David Morales (david.morales4)
d22=DRODRI07 Domingo Rodriguez (domingo.rodriguez)
d23=DWASHA00 Daniel Washa (daniel.washa)
d24=EBROOK02 Earl Brooks (earl.brooks1)
d25=ECARRE00 Edelmira Carreon (edelmira.carreon)
I'm having a problem with getting a result from another workbook. The purpose is to extract information from a closed workbook representing data from a country (ie US.xlsm, UK.xlsm) into the open one (summary). I want to count the number of results in a column which are above a certain amount (in this case 100).
So this is my coding for getting this result
=SUMPRODUCT(--(('C:address[US.xlsm]Worksheet name'!$E$2:$E$30000)>100))
Which works no problem for getting the number of results in the E column above 100. my issue is that I want to be able to change the name of the country in a cell, and then get the results automatically from the relevant workbook. I've been using CONCATENATE for these purposes and EVAL (from MOREFUNC)... and I get #REF!
So if I split up the above coding into two cells "=" and "SUMPRODUCT(--(('C:address[US.xlsm]Worksheet name'!$E$2:$E$30000)>100))" (just to keep it simple) and then use CONCATENATE to combine them in a cell. Using EVAL on that cell gives me #REF!
I've tested SUMPRODUCT with EVAL and CONCATENATE on formulae like the one above which do not link to other workbooks, and they seem fine. and SUMPRODUCT and linking to a workbook also works fine in the first example.
So the problem is somehow coming from the combination of SUMPRODUCT, EVAL and accessing an external sheet.
I would like to calculate the date but depends on how the information is scattered. In the first coloumn I have a set of dates, in the second coloumn I have a list of letters. I would like a macro that reads the the letters, and as they disappear calculate the time interval. For instance,
01/01/2002 B,C
02/01/2002 A,B,C
03/01/2002 C
So it firsts starts off and sees that the letters are B and C are there to begin with, then it moves on to the second row and then sees that the letter A has been added. Then to the third row and sees that there is only C so A lasted for 1 day (was there on 02/01/2002 and disappeared on 03/02/2002) and B lasted for 2 days (was there on 01/01/2002 and disappeared on 03/01/2002).
I have a graph which displays information from a vlookup.. The vlookup can bring either numbers which are in percentages format or ordinary number format.
The question I have is is it possible for the graph to automatically change format depending upon the information who is looked up..
If so how can this be done..
I am not sure how would I go about finding the last data entry in a table and using formula to extract information. Attached excel 2007 file to better understand. Need formulas for cell B20 and E20. You can use column A as a reference if it is easier as this column is counting the number of entries and the next value will simply be a +1 to the last value entered in column A(or 75 in our case).
For Cell B20: Need to calculate the days difference between todays date (Cell A20) and the last entry date(in this case B5, this will change as new data will be entered). A subtraction of two dates would suffice - my problem is that I do not know how to find the last entry on the table and use it. You have to remember that table gets updated and new entry will be added so then cell B20 should give the difference between A20 and the last date entered.
i have 2 sheets, one is a database sort. and the other sheet is a template tat i had design. i have inserted a filter to the database sheet that i wan to extract info from my template (diff catergory). but shows nothing,
My user has data in a comment in a cell that provides additional information about the data in the cell. He does not want to have to retype that information into another spreadsheet but wants it to automatically populate.
For example:
Column Headings: A1 = Tardy; B1 = Absent; C1 = Detention
Data in the following cells: A2 = 2; B2 = 1; C2 = 3
Comments are: A2 = Smith - 10 min, Jones - 5 min; B2 = Adams - Sick; C2 = Brown - Talking, Green - Talking, Gray - Sleeping
He wants another workbook that has a column for each name in three separate tables, 1 each for Tardy, Absent, and Detention. He wants the Tardy table to show 10 min under Smith, 5 min under Jones, etc.
Is this at all possible? I will say that I tried to get him to change his spreadsheet so that he inputs the data into the three separate tables then summarizes it in the sheet he presently has but he cannot change the original sheet. It is a shared sheet by many of our office locations and changing it is not an option.
Is there any way.. probably a macro which can extract the following information from a particular folder folder in outlook / PST into an excel sheet :
1. Sender
2. Recepient
3. Received date & time
4. Subject
Is there any way to create a specific template that will extract information from PDF file and make it to an Excel File ? The Template would know each PDF and will know which information to extract to excel ?
View 1 Replies View RelatedI am using the vlookup function accross two tabs. . . we'll call them TAB1 and TAB2. On TAB1 I have all my base information which I am referencing from, TAB2 is the sheet where i am using the vlookup formula to extract the information i need from TAB1.
Using cell B2 as an example from TAB2:
I used a vlookup formula in cell B2 and got the information from TAB1. The vlookup formula pulled, correctly, cell F17 from TAB1.
Instead of the formula reading "=vlookup(...)". I would like the cell to simply read =F17.
My company use a program called Bartender which is a barcode printing program. Bartender has the ability to extract information from an Excel sheet which is really useful and prevents repetetive keying in of information. We have found that if you simply print the Excel sheet when Bartender next uses the file it says it is corrupt and simply copying the data into a new spreadsheet and resaving it as the same name does not resolve this issue.
View 3 Replies View RelatedI need to do an if then statement that takes the date (which is in the form of "3/31/2009" and only use the "3/31" info. Only its slightly more complicated than that, its a formula that links to another program. Basically, the current quarter end date is "curdate()" so if i want a cell to show that, i enter "=curdate()" and i would like to build an if then statement using that date but only using the month/date combo (only possibly dates are 3/31, 6/30, 9/30, 12/31) so I guess I could even use just the month, the problem would be to extract that information in a formula and build the if then statement around it.
So:
if its 3/31, show 1
if its 6/30, show 2
if its 9/30, show 3
if its 12/31, show 4
i usually work with 3d and i export all my working in excel to summarise in a table.Now i came across an issue whereby i have a whole exported list for the whole project and i want to extract some of the info to make a new table.My master list is a dynamic one it keeps on updating from the project.
I have attached the sheet, there is one master sheet and 2 other sheets, PID10 & PID2...those sheets are break down table form the master sheet.
I want to add up items in column H, but only if Column J says "yes" in the same row.
I tried a few methods as I always try to do, but I came up short with this one.
I have created a userform that allows input of information and then deposits the information on a specific sheet. I am looking for a way to have that information not only deposited on the specific sheet it is already set to but also to another sheet based on a selection made from a combo box.
here is my current
If a certain email comes into a mailbox with certain parameters eg subject and from criteria is met. Then extract the data from the email attachment (daily order) and add it to a master sheet containing all orders.
View 1 Replies View RelatedHerewith I attached a sample excel file.
Structure file which i attached herewith include all the cost center details. normally it is a big file contain more than 1000 cost center details. Structure File.xlsx If i want a cost center name for some cost center code, i have to open this file and find a specific name.
What i plan is develop a macro function called "CC".
If I type =CC("D232") I need to print cost center name for D232.
But the problem is i don't want to open the structure file, without open that file, when i type this function i need a result.
I have a file consisting of two columns, called, "bom ref" and "material"
I need to show the data as indicated in the file, headed required format required.
In effect where I have a 0, that is the material I need to show for every row with a bom ref. of 1,2 or 3, down as far as the next 0 but not including the 0, when I reach the next 0, the material is a new letter, and that letter needs to repeat down as far as the next 0, but not including the 0 and so on.
I currently written the following formula, but always have issues when adding additional depending on selection.
D8 is the selection ( Validation ) on PERF EXP FORM Tab, Once you enter the selection... you then go to the Accounts per hour Worksheet
=IF('Perf Exp Form'!$D$8="Test1 14-18 station",IF(('10220DBHE'!B9=A6),IF('10220DBHE'!C9 > 11000,11000,'10220DBHE'!C9),"N/A"),"N/A")
Perf Exp Form
Perf Exp Form *ABCDEFGHIJKLMNOPQ4 *1. GENERAL INFORMATION****************5Customer***Date / Name(s)*6ApplicationSheet Size1UP/2UPOrientationSOG/EOGFold TypeFold Plate# CH***78 1/2 x 142 UPPortraitSOGLetter/ZHeavy1***8Machine / model**Enduro 4-6 station9ConfigurationCHANNEL 1CHANNEL 2CHANNEL 310590-4720-4910 Dual DeckNONENONE11Date / Name(s)*** Excel tables to the web >> Excel Jeanie HTML 4 ......
I used to use Excel many many years ago for all my basic business databases and pivot table reports (so was at a basic competency level) and want to use it again but it has been quite a while and I can't remember how to do the following.....
I want to build a database of sales and purchase info in say 'sheet 1' - let's say 30 different headed columns and then many lines of different information under each column.
In 'sheet 2' I want to create an invoice template of my own design (I can do easily) for printing.
This template will need to extract say 10 bits of information from a particular row and then put them in a certain place on this sheet.
How can I type in one piece of information in a cell on sheet 2 (say the invoice or line number of the database) and that will then trigger all the other needed information from that particular line in sheet one onto this template?
I know it can be done but for life of me can not remember the formulas to use for these other cells in sheet 2 based on the info put in that one 'trigger' cell
I have created a color coded calendar on a spreadsheet for work that shows when a book will be published depending on when it comes into our warehouse, this is on sheet one.
I would like on sheet two to have some kind of filter or statement that would eliminate the need to look at the calendar, I.E. the user would just have to type in the date or select the date from a list and excel would show you what day the book would publish on using the data from sheet one.
I can imagine that this is hard to picture so i have attached the file as well.
I have several blocks of data that I have defined under several names to make data processing much easier when writting formulas. They problem that I have right now is that depending on the value of one cell, I need to call up a given defined name block of data to be used on the calculations. These blocks are labeled as DATA400, DATA500, ... user will input information that will allow me to determined what block needs to be used, user will input data like 400, 500, ..., but to be able to call a block of data I need to reference the complete label DATA400. I have tried to concatenate "DATA" to whatever value is input by the user and use the concatenated value to call the specific blocks of information but it doesnt work.
View 8 Replies View RelatedI have 2 worksheets, 1 with a table sorted like this (in a row):
component | start date | end date | assigned to
Second worksheet with a table like a calendar with dates and people (dates in the columns and people in the rows), every component is assigned to each person by dates.
............ | 01/01 | 02/01 | 03/01
---------|----- --|-------|-------
person 1 | comp1 | comp1 | comp2
-------- |--------|-------|-------
person 2 | comp1 | comp1 | comp3
I want the assignment from worksheet 1 to worksheet 2 to be automatically. i will set the start and end date next to the component in the first table and assign it to a person/s and it will be automatically get filled in the second worksheet (the calendar) under the person/s and under the same dates as set in the first worksheet.
You can see a template here: [URL] ........
I think this is possible but cant find anything on it ........
View 9 Replies View RelatedI need a formula that displays the word "Day" or "Days" depending on cell entry i know the formlula =IF((B12)>0,"Day","") to show the word day but i want it to show "day" if a 1 is entered or "days" if any number over 1 is entered.
View 2 Replies View Related
