In Cell A1 Value is: 20070322_023047_002035_1112223333
above code is like Date(YYYYMMDD)_Time(HHMMSS)_Agent#_Phone#
I want result As per Following:
In Cell B1: 03/22/2007 Date(MM/DD/YYYY)
In Cell C1: 02:30:47 Time([HH]:MM:SS)
In cell D1: 002035
In cell E1: 111-222-3333
I need a formulla which will extract the data from one cell into three different cells, I have three diffterent syntax added at the end of the text, for example I have below text in cell A2, I need to have Office installed on 69 PC s Below are the IP addresses 10.109.69.245 10.109.68.109 10.109.69.416 10.109.69.213 10.109.68.62 10.109.68.97 10.109.69.124 10.109.68.96 10.109.69.116 10.109.68.34 10.109.69.171 10.109.68.57 10.109.68.91 10.109.69.249 {MS Office Issue} ~Excel~ *Client Not Reachable*
{MS Office Issue} ~Excel~ *Client Not Reachable* are the three syntax that are there in the text, want need is, in cell B2 it should show "MS Office Issue", in cell C2 it should show "Excel" and in cell D2 it should show "Client Not Reachable" (without the quotes)
I paste new data into a sheet of a monthly report I prepare. For this sheet, the # of data rows change (and is unpredictable) every month. I need the value inside a specific cell that dynamcially moves up and down based on the # of rows for that month (because it's below the rows of data).
So I made a formula to identify the exact cell # every month.
Example:
This month the exact cell is F255 in the "Refi" sheet.
So my formula in the "Summary" sheet cell A1 first finds the cell row # only (255) and since it's always column F, in B1 I have
VB:
="F" & (A1)
This outputs "F255" in B1, successfully identifying the target cell.
Now how do I write a formula in C1 to grab the value from whatever cell is named in B1. (For this month, the value in cell F255 from the "Refi" sheet)
I have a cell that I need to clean up. It contains text and numbers.
What I want to know is this, can I have a formula that will extract just the numbers and not the text?
For example if cell B2 = 'Ref No. 123456'. Could I just extract the '123456'?
This is very similar to my previous post, which was solved. Now that I've extract the numbers, I need to extract the text for the specific work activities, for example 13Z or 9GGG. I'm assuming some variation on this formula:
=LOOKUP(9.99E+307,--MID(C4,MIN(FIND({1,2,3,4,5,6,7,8,9,0},C4&1234567890)),ROW(INDIRECT("1:"&LEN(C4)))))
is the solution, but I'm struggling with making the correct alterations.
I've got a cell with codes, such as:
21ML,
43GKP,
etc.
I want these to look like :
ML21,
GKP43,
i.e. swap the numbers with the letters but keeping the order of the characters.
How I can extract text from cell using a formula, for below example? I haven't find a formula which work as non case sensitive.
I want to extract ABC from below text , I know I can use mid , left and find to do this.
Text
abc 12
12 3 Abc
12 ABC 133
I have several cells with text as such:
cell A1: john doe (johndoe@email.com)
cell A2: jane smith (jane smith@email.com)
How can I extract just the name? I want the formula results to be john doe and jane smith
I have a file of 2000 rows I would like to Extract from each Cell the size of the product.
Example
Chlorella Powder 100g Organic
Chlorella Powder Organic
100g
The first row shows how it is at the moment the second row shows how I would like it to be.
How can i extract text and number from a cell .For example I have a series of data like 453x, 45y in Column "A". I want text in column "B" and numbers in "C" column. The cell has variable data with diffrent length.
View 9 Replies View RelatedI have an extract from a call logging system; one of the columns is a description of the call (this column is extracted in Text format). Within some of the descriptions is a reference number which I need to extract (sadly this number isn't kept in its own field) - is there any way to determine whether a cell has numbers in it, and if so is there a way to pull them out into a seperate column? (preferably using a formula as I'm no good at VBA!)
Scenario:
A1: The War of Art by Steven Pressfield and Shawn Coyne (Nov 11, 2011) - Kindle eBook
A2: Do the Work by Steven Pressfield (Apr 20, 2011) - Kindle eBook
A3: How to Get the Raise You Want in 90 Days or Less: A Step-by-step Plan for Making It Happen by Kathy M. Barnes and Robyn Feldberg (Jan 30, 2009) - Kindle eBook (Note: This cell (A3) have "by" 2 times)
I want to extract text from RIGHT till the word "by"
So the result must be:
B1: by Steven Pressfield and Shawn Coyne (Nov 11, 2011) - Kindle eBook
B2: by Steven Pressfield (Apr 20, 2011) - Kindle eBook
B3: by Kathy M. Barnes and Robyn Feldberg (Jan 30, 2009) - Kindle eBook
I need a formula that will extract only the text between the 1st and 2nd dash in a cell. Example:
10466193-1909457-
10648145-3026718-t526363536m
This formula would return only the following:
1909457
3026718
I have a worksheet with over 10,000 records. The column that lists where a person is willing to relocate can have up to 60 city/state entries in one cell.
Here is an example of what appears in one cell - this is exactly how it appears:
ASAI Los Angeles (XX , CA
DFO Pacific (XX ONLY), CA
DFO Pacific Area Analyst Laguna Niguel (XX ONLY), CA
SAI Los Angeles (XX ONLY), CA
Ldr Los Angeles El Segundo POD (XX ONLY), CA
Ldr Los Angeles Long Beach POD (XX ONLY), CA
Ldr Los Angeles POD (XX ONLY), CA
Senior Ldr (XXXX) Washington (XX ONLY), DC
What I need to do is be able to sort on city and state, so I wanted to be able to extract and separate the city and state. I tried using a find/replace (CTRL J) to enter a semicolon between each entry and thought I could do text to columns to separate, but that doesn't work.
How I could extract this information? Notice that the first entry is missing ) - that is throughout the records.
In Cell A1 Value is: 20070322_023047_002035_1112223333
above code is like Date(YYYYMMDD)_Time(HHMMSS)_Agent#_Phone#
I want result As per Following:
In Cell B1: 03/22/2007 Date(MM/DD/YYYY)
In Cell C1: 02:30:47 Time([HH]:MM:SS)
In cell D1: 002035
In cell E1: 111-222-3333
I have a long list of process steps in a collumn e.g.
A
_Tank1_CIP
_Tank1_CIP
_Tank2_CIP
_Tank4_CIP
_Tank_9_CIP
and then i have a list of tanks: Tank1, Tank2 etc. The i want a forumla to extract and return the tank in a adjacent cell:
A B
_Tank1_CIP Tank1
_Tank1_CIP Tank1
_Tank2_CIP Tank2
_Tank4_CIP Tank4
_Tank_9_CIP Tank9
I have to sort list of thousands name (3000 names) and remove duplicates. My problem is majority of the names have their title (i.e) Prof. Dr. Ir. Sir. etc typed in, so I need to copy the title in different cell and have their name only. Here's what I expect:
Current List ----> Column A -->Column B
Drs. H. A. Andrew Boston, MRE. ----> Drs. H. --> Andrew Boston, MRE
Drs. H. Andrew Smith ----> Drs. H. --> Andrew Smith
H. Abd. Mohammed Junus ----> H. --> Abd. Mohammed Junus
Prof. DR. Jane Doe, MD ----> Prof. D --> Jane Doe, MD
Prof. DR. Ir. H. Randy Wong, MBA --->Prof. DR. Ir. H. -> Randy Wong, MBA
Dra. H. A. Karen Patel ----> Dra. H. --> Karen Patel
Drs. H. A. M. Kangkong ----> Drs. H. A. --> M. Kangkong
Prof. Drs. H. A. Kareem Saleh, Ph.D -> Prof. Drs. H. A. ->Kareem Saleh, Ph.D
Dra. Hj. Nina Schorder ----> Dra. Hj. --> Nina Schorder
Ir. Abdul Jabbar ----> Ir. --> Abdul Jabbar
I need to extract text from the middle of a cell. I know you can use the MID function but with the complete function as i need to extract text string from Name to the end of their full name (I have highlighted below in bold). Of course their full name will change in each row.
Example text in cell B2: ID: 197993043 Name: Ben Fred Company: ID: 197992821 Name: Hello World!
A2 cell: =MID(B2,15,??????
I am trying to categorize a list of words based on the first letter.
For example:
[Code] ......
I want to see if the letter 'D' in 'Data' occurs in a range from A-G, if so display "A-G" in cell B,
else if the first letter occurs from H-M, display H-N in cell B
else if the first letter occurs from N-R, display N-R in cell B
else display S-Z in cell B.
I have a cell that has a formula in it like PREM + PRDCMP + ACQ + DLR in a spreadsheet that looks like this:
PREM PRDCMP ACQ DLR VIP COMM TOTAL
2 1 3 4 6 5
PREM + PRDCMP + ACQ + DLR 2 1 3 4 10
where PREM + PRDCMP + ACQ are colored red and + DLR is colored blue. This formula is entered in that particular cell as a text string. I have a formula in the PREM column that says if the word PREM is located in the formula to the left (and it is), then put the value that is located right under the PREM column (2) in the blank cell next to the formula. So, in the above example, I have an IF statement that sees that PREM is in the formula to the left and so underneath the PREM column, next to the formula, it would place the number 2. Now, I need Excel to detect if any word in the formula text string is colored blue and if it is, to put a zero in that column. So, in the formula above, if + DLR is the only text that is blue, I want to have Excel add 2 + 1 + 3 only. I want to have Excel take any string out that might be colored blue, such as + DLR and return the value of zero for it. The purpose of the different colors in the formula is to distinguish which information is relevant and which information should be ignored. So, I'd like Excel to read the above formula and say put the PREM amount in the cell under PREM, put the PRDCMP amount in the cell underneath PRDCMP, put the ACQ amount in a cell under ACQ and put zero in the DLR column since it is colored blue. If any of them (PREM, PRDCMP, ACQ, DLR, VIP or COMM) are colored blue, I want Excel to put a zero in that column.
I have a built a catalogue of records for various of my companies assets. Each asset has its own sheet in a work book and I have used a vb macro to include an automatic Index sheet at the front of the book. This takes the names of the various tabs, in the order I have them in the workbook and creates a simple listing in column A as an Index List
What I want to do is to build a summary table to the right of the Index List, pulling in a few of the key data points about the assets into a single table.
To do that I need to be able to extract the text string from the Index List and use it to form part of a cell reference pointing to a specific cell in the relevant individual Asset sheets.
I am using Excel 2013. Anyway, the first issue is that I need to pull a date and a time period from text. So, for example, if I see something like Sunday Prime Time 7/6/14 8:37PM, I would want to pull ONLY the "7/6/14 8:37PM" out of it. Each text box could potentially be different, so it might not always be in the same format as "Sunday Prime Time 7/6/14 8:37PM" it might only show just the date and/or the time without all the extra text i.e. 7/6/14 8:37PM. Some of the cells will have text, others might only have just the time or even just the date and the time. The only thing that I am worrying about in each cell is extracting just the date and time. If this is too much to ask of excel, I would be ok with extracting ONLY the time - 8:37PM and not the date, but I would much rather be able to get both the time and date.
THEN, onto part two of my question. After I would pull the dates and times, I need to compare them with each other. So, when I have the same date with two separate times on that date, I need to write a formula to show if those times on that date are less than 30 minutes apart. So, if I have 6 times on 7/6/14, I need to know if any of them are less than 30 minutes apart.
I would need to have the formula say something like "Problem" if the times on 7/6/14 would be 5:30PM, 5:48PM, 7:00PM, 8:00PM, 8:15PM, and 9:00Pm for example. I would like to see the word "Problem" since 5:30PM and 5:48Pm is only 18 minutes apart, and "Problem" after 8:15PM since that is only 15 minutes past the 8:00PM which is obviously under 30 minutes. The times that are more than 30 minutes apart such as 7:00PM and 9:00PM for example are more than 30 minutes apart from any of the other times that were extracted.
I have a set of task descriptions that I am attempting to trend on. Some of these (Column B) have the customer's name added to the description; others do not. I need to be able to make a list of task names (ColumnA), removing the name from the text string.
The formula I am using is [=LEFT(B3,FIND("for",B3)-2)].
The problem I am having is when the description does not contain the "for" built into the formula, I get "VALUE" error. What adjustment can I make to the formula to pull over the Description if the "for" does not appear in the text string?
An original text string entry appearing in an Excel cell would be:
"N7C Neuroprotective J5Z Antiviral, other M2Z Antiarthritic, other J5A Antiviral, anti-HIV"
I need to extract N7C, J5Z, M2Z and J5A from this string and list these alphanumeric values in separate cells adjacent to the original text string. The challenge is that these alphanumeric references may appear in different positions within the original string with no fixed value e.g. a "," separating them. The alphanumeric references may also be 3 or 4 characters in length and there may be different numbers of alphanumeric references in the original string.
Another example would be (very different from the first):
"T2Z Recombinant, other K5B Radio-chemoprotective J3Z Antibacterial, other D3A Vulnerary A10C Symptomatic antidiabetic K6Z Anticancer, other R8A Antiasthma B6A Septic shock treatment I1Z Immunostimulant, other S1Z Ophthalmological R8B Antiallergic, non-asthma M1A1 Anti-inflammatory"
You can see that in this further example "A10C" & "M1A1" are 4 character alphanumeric strings wheras the others feature 3 characters.
I am trying to extract numbers after a specific text in a text string, for eg :abc SN 12345 xyzedf SN No. 456 mnoAs per above, i want to extract any numbers afters "SN". the numbers can be vary in digits i.e. it can be 3 digit numbers or 4 or 6. Also, at times there is some other text in between (like SN No.) numbers and search word (i.e. SN)Any formula to get result as "12345" and "456".
View 5 Replies View RelatedI had VBA run a third-party program ("HYD") using data listed in my spreadsheet. HYD produces a textfile and I want to extract a number from that log (line 58, columns 6-10 to be exact).
I started with
Open "C:TempHYDLOG.TXT" For Input As #1
but I don't know how to have it skip down to line 58 or which function to use to extract the number I want. I've read through tons of help files and forums but none of them treat anything as simple as scrolling down to specific lines.
The entire subroutine up to that point is as follows: ....
There has to be a smarter way to do the formula in A3?
Code:
-----------------------------------------------------A------------------------------------------------------
1 West @ Industry - 331.3421
2 =LEFT(A1,FIND("@",A1)-1)
3 =LEFT(MID(A1,LEN(LEFT(A1,FIND("@",A1)+2)),LEN(A1)),FIND("-",MID(A1,LEN(LEFT(A1,FIND("@",A1)+2)),LEN(A1)))-2)
4 =MID(A1,FIND("-",A1)+2,LEN(A1))
Results
Code:
------------A-------------
1 West @ Industry - 331.3421
2 West
3 Industry
4 331.3421
I trying to extract the group, sqd, office1 and office2 from a symbol. Each is seperated by "/".
I can get the Group pretty easy but after that its been giving me trouble.
I know there is a formula for the following but I cant remember which one. I have a text string with words seperated by a "". Which formula should I use to display the words from the string in a cell?
View 9 Replies View RelatedI have a cell in my worksheet with a fully qualified filename like 'D:abcDefGHIJklxyz123.app
I would like to extract only the xyz123.app. Obviously, the number of characters is going to vary based on the filename. The find and search functions appear to locate the cell but not the substring in the text. The right and left appear to work based on number of characters and in my case these are varying. Also, there does not appear to be any function that can do a search a string from right to left.
