Function That Enable To Extract Text In The Middle Of Cell
Feb 25, 2014
I need to extract text from the middle of a cell. I know you can use the MID function but with the complete function as i need to extract text string from Name to the end of their full name (I have highlighted below in bold). Of course their full name will change in each row.
Example text in cell B2: ID: 197993043 Name: Ben Fred Company: ID: 197992821 Name: Hello World!
I want to write a macro that is able to copy the 5th position to the 10th position characters from one cell to another. For example, in Cells(B1) contains: Mon Jan 8 09:00:02 2007. Then I want to copy "Jan 8" to Cells(A1). How do I do that? Also, i am not supposed to hardcode the cells. The codes should look something like that
start = InputBox.... end = InputBox...
For i = start To End Cells(i,"A").Value = (whatever Function To copy 5th To 10th char of Cells(i,"B"))....... Next i
I have a several hundred rows of data that are telephone line type, number and user name all concatenated. This is the way the data arrives. I need to extract the number and user name into 2 separate columns - I do not need the phone type. Is there a formula that can identify numbers within text. I can't use Text to Columns as the leading telephone line type varies and I don't want to use VBA to do the work. There are at least 10 different line types, example of some:
SPECTRUM TIPT 0740357052 LUNCH ROOM SPECTRUM ANALOGUE 0744076642 J BROWN EXCHANGE LINE (PSTN/PSTN) 0742031346 HAYES SUB FAXSTREAM DUET 0742003232 NORTH SUBSTATION M/BANK (Spectrum) 0740318578 MB TO 4429 P PHONE (TELSTRA) 0744074159 B WILLIAMS WITHIN ANALOGUE 0784625967 I MAKIT
the following phones start witn an "N" PRIVATE LINE (PAPL) N7035896P ROTHMANS SUBSTATION PRIVATE LINE (VGDL) VOICE LINK N7563069P P BLACK PRIVATE LINE 2 WIRE PREMIUM (PAPL) N70079 FITZGIBBON G PRIVATE LINE 4 WIRE PREMIUM (PAPL) N70335 SUBS SSKLB
Can this be done or will I have to resort to code.
I have a text string with 3 data to be extracted and then split throu range, but only specific parts is needed.
string is like that: Name Surname - Number : ################ - Exp : YYMM - Centre etc etc....
Lets say its allways happens in cell A3, for example: Adrian Kukuwas - Number : 1235467890123456 - Exp: 1009 - Centre... I would like a macro:
*that runs only if string starts with a letter, then if so *takes Adrian Kukuwas to cell D3 *takes 1009 (the exp) to B3 and makes it look like 09 10 (or 09_10) *in A3 leaving only the number 1235467890123456 text formated (sometimes the copy source formats the cell for bad)
I'd like to extract just "blue.red.yellow.green" to the following spreadsheet column, keeping the intermediate dots, but getting rid of the first/last words and their succeeding or preceding dots.
I've tried using RIGHT, LEFT, MID formulas unsuccessfully
I'm trying to create a VB Script for an AS/400 app. It's all written but I'm trying to feed the data for part from an excel file. If B5 was 10 I need the final output in my cell to read:
autECLSession.autECLPS.SendKeys "10"
Here is my current formula ="autECLSession.autECLPS.SendKeys"""""&B5*100&"""""" It's reading as autECLSession.autECLPS.SendKeys""10"" which has two sets of quotes not just one and no space between sendkeys and "10"
I am trying to remove a middle initial from a text string however not all of the cells have middle initials. In column B I would like to return the first and last name. If needed I can have the first name in column B and the last in column C then combine them.
Example John A Smith John Smith John Smith John Smith
I am looking for a formula to delete information from the middle of a text string. I have ~ 1,000 lines of data. Each text string is composed of the same way. The data I am looking for is two parts of the string (1) all the text up to and including the first “%” character (2) the last six characters.
Raw Data CARDINAL HEALTH 5.5%13CARDINAL 5.513 CARDINAL HLTH 5.5 061513 UST BILL 0%09US TREAS BILL 0%09 UST BILL 0.0 092409 WORLD SAVINGS 4.125%09WORLD 4.125%09 WORLD SVGS 4.125 121509 JP MORGAN 5.375%12JP 5.375%12 JPMORGAN CHS5.375 100112
Desired Result CARDINAL HEALTH 5.5% 061513 UST BILL 0% 092409 WORLD SAVINGS 4.125% 121509 JP MORGAN 5.375% 100112
I have a set of macros that allows me to call up lotus notes and send emails. However, i am not able to call up the 'prevent copying' function of lotus notes.
I have a ton of text boxes on a userform that are in an initial state of being disabled. Is there a quick way of enabling by use of a mask for these Text Boxes ?
All the text boxes I want to enable are named "TB_fieldname" and by mask I mean a snippet of code using something like "TB_*"
Example tb_liqname, tb_casecost, tb_bottleprice etc etc..
I need a formulla which will extract the data from one cell into three different cells, I have three diffterent syntax added at the end of the text, for example I have below text in cell A2, I need to have Office installed on 69 PC s Below are the IP addresses 10.109.69.245 10.109.68.109 10.109.69.416 10.109.69.213 10.109.68.62 10.109.68.97 10.109.69.124 10.109.68.96 10.109.69.116 10.109.68.34 10.109.69.171 10.109.68.57 10.109.68.91 10.109.69.249 {MS Office Issue} ~Excel~ *Client Not Reachable*
{MS Office Issue} ~Excel~ *Client Not Reachable* are the three syntax that are there in the text, want need is, in cell B2 it should show "MS Office Issue", in cell C2 it should show "Excel" and in cell D2 it should show "Client Not Reachable" (without the quotes)
I paste new data into a sheet of a monthly report I prepare. For this sheet, the # of data rows change (and is unpredictable) every month. I need the value inside a specific cell that dynamcially moves up and down based on the # of rows for that month (because it's below the rows of data).
So I made a formula to identify the exact cell # every month.
Example:
This month the exact cell is F255 in the "Refi" sheet.
So my formula in the "Summary" sheet cell A1 first finds the cell row # only (255) and since it's always column F, in B1 I have
VB: ="F" & (A1)
This outputs "F255" in B1, successfully identifying the target cell.
Now how do I write a formula in C1 to grab the value from whatever cell is named in B1. (For this month, the value in cell F255 from the "Refi" sheet)
I am using a check box on a form i have created. If it is unchecked (default = checked) then it enables a text box (default enable = false). The problem is if the user changes their mind and recheckes the check box it will not disable the the textbox. The text box stays enabled no matter what the check box's status is. I am unsure how to approuch making the following happen:
This is very similar to my previous post, which was solved. Now that I've extract the numbers, I need to extract the text for the specific work activities, for example 13Z or 9GGG. I'm assuming some variation on this formula:
How can i extract text and number from a cell .For example I have a series of data like 453x, 45y in Column "A". I want text in column "B" and numbers in "C" column. The cell has variable data with diffrent length.
I have an extract from a call logging system; one of the columns is a description of the call (this column is extracted in Text format). Within some of the descriptions is a reference number which I need to extract (sadly this number isn't kept in its own field) - is there any way to determine whether a cell has numbers in it, and if so is there a way to pull them out into a seperate column? (preferably using a formula as I'm no good at VBA!)
A1: The War of Art by Steven Pressfield and Shawn Coyne (Nov 11, 2011) - Kindle eBook A2: Do the Work by Steven Pressfield (Apr 20, 2011) - Kindle eBook A3: How to Get the Raise You Want in 90 Days or Less: A Step-by-step Plan for Making It Happen by Kathy M. Barnes and Robyn Feldberg (Jan 30, 2009) - Kindle eBook (Note: This cell (A3) have "by" 2 times)
I want to extract text from RIGHT till the word "by"
So the result must be: B1: by Steven Pressfield and Shawn Coyne (Nov 11, 2011) - Kindle eBook B2: by Steven Pressfield (Apr 20, 2011) - Kindle eBook B3: by Kathy M. Barnes and Robyn Feldberg (Jan 30, 2009) - Kindle eBook
I have a worksheet with over 10,000 records. The column that lists where a person is willing to relocate can have up to 60 city/state entries in one cell.
Here is an example of what appears in one cell - this is exactly how it appears:
ASAI Los Angeles (XX , CA DFO Pacific (XX ONLY), CA DFO Pacific Area Analyst Laguna Niguel (XX ONLY), CA SAI Los Angeles (XX ONLY), CA Ldr Los Angeles El Segundo POD (XX ONLY), CA Ldr Los Angeles Long Beach POD (XX ONLY), CA Ldr Los Angeles POD (XX ONLY), CA Senior Ldr (XXXX) Washington (XX ONLY), DC
What I need to do is be able to sort on city and state, so I wanted to be able to extract and separate the city and state. I tried using a find/replace (CTRL J) to enter a semicolon between each entry and thought I could do text to columns to separate, but that doesn't work.
How I could extract this information? Notice that the first entry is missing ) - that is throughout the records.