I require a formula to extract minutes and seconds from the below cells and place them in the cells beneath the required data heading as shown.
Code:
ABCD1 REQUIREDREQUIREDREQUIRED2 DATA DATA DATA3DATAMINUTESSECONDS 1SECONDS 246m02.4s62453m58.s358061m11.98s1119870m58.54s05854812m58.04s1258491m12.56s11256105m08.s580115m.01s501121m00.17s1017
I need an automated way to extract the dollar amount from B and then from C and put them into separate columngs. So the dollar amount in column B is extracted out of the text and then put into a separate column. Then, the dollar amount in column C is extracted and put into a separate column.
I have several lines with text strings containting three numbers in each line. I need a code to extract all three numbers from each text string. The numbers can be placed on the following columns in each row.
I have a large number of text strings representing chemical formulas. They include letters for the element names and numbers for the number of atoms of each type. For example:
C18H35NO3 C4H7S C11H16O2Na
etc. The element name has either one or 2 letters (one capital, one small), if there is no number and no small letter after the capital letter that means that there is only one atom of this sort(like in C18H35NO3 - there is one N atom). If the element is not listed in the text string it means that it is not found in that particular formula (i.e. the numerical value is 0). Is there any function that could help converting such a vector (say A1:A3) into a matrix that will have the following form:
C H N O S Na 18 35 1 3 0 0 4 7 0 0 1 0 11 16 0 2 0 1
and totally working! but the problem is if the word "ink" in the left of the value --> 253.00 ink and the result is #NA, is there any way that i can get the value whether the word Ink is in the left side or right side of the value?
also bothered why is it if the word is not "ink" in the cell and return -> #value since i put ("") in the last part of If function(value if false)?
=IF(SUM('SL-001 - AT-001-001'!R[852]C:R[856]C)=0,SUMPRODUCT('SL-001 - AT-001-001'!R[826]C:R[830]C, 'SL-001 - AT-001-001'!R[840]C:R[844]C,'SL-001 - AT-001-001'!R[846]C:R[850]C), SUMPRODUCT('SL-001 - AT-001-001'!R[826]C:R[830]C,'SL-001 - AT-001-001'!R[840]C:R[844]C, 'SL-001 - AT-001-001'!R[846]C:R[850]C,'SL-001 - AT-001-001'!R[852]C:R[856]C)) *'SL-001 - AT-001-001'!R992C*R3C9 and I would like a macro that will extract the numbers between each instance of the letters R and C , i.e. 852, 856, 826 etc etc. in cells A2, A3, A4 respectively.
Need to write a Macro to only extract numbers from text, characters and numbers fields. I would like the numbers to be extracted in column B, C & D. I am only interested in numbers that begins with 200's, 800's and 4500's. see the attached file.
I have a listbox populated with a number followed by description. How do I write code to extract the number and description to different cells. Listbox example: "1234ES - Project Description". Now I want "1234ES" in one cell and "Project Description" in cell left of number.
I am trying to extract numbers after a specific text in a text string, for eg :abc SN 12345 xyzedf SN No. 456 mnoAs per above, i want to extract any numbers afters "SN". the numbers can be vary in digits i.e. it can be 3 digit numbers or 4 or 6. Also, at times there is some other text in between (like SN No.) numbers and search word (i.e. SN)Any formula to get result as "12345" and "456".
I have a text file with rows and columns of numbers ranging from 1-4 digits that I'd like to import/copy into Excel with each number being in its own cell. But whenever I copy/try to import, Excel splits all of the 3-4 digit numbers up into single digit numbers. The text file has 10,000+ columns (each number occupies two columns so I have half of that amount in numbers) and 300+ lines.
Is the file simply too large for Excel to handle or is there a way I can do this?
In the ID column of the attached excel file whenever I convert the numbers stored as text to numbers it results in a weird transformation.
e.g. an ID of 480610141001 becomes 4.8061E+11. When I do the same process in the name column, which has similar numbers, it will give the correct result following the same process.
I have been looking through the forums and found the below code, but I have both text and numbers in the same range. I have attached an example of what I need to have converted.
A B C D E F G 23445566894 Brwn pdc aft Cat1 45687930596 $5 45687930596 Gld wdget adi Cat2 23445566894 $6
In the example above, I would like to do a vlookup in column C that matches the digits in column A to those in column F, with the output being the corresponding value in column G. I believe it involves the left function but not sure how to really use it here.
I'm working on a spreadsheet with about 400 rows and 10 columns. All the numbers in the columns are formatted as text, which doesn't allow me to use AutoSum. I have selected the cells and formatted them as number with no decimals, but AutoSum still doesn't work because the formatting hasn't changed and they're still formatted as text. I know if I double click each cell, the cell changes the format from text to number, but that will take a lot of time to change 400 cells in each of the 10 columns. What can I do to quickly reformat the cells from text to number?
I am looking for a VBA to sort rows which include actual numbers and text representing decomposed CTQs (or procedures in IT development)
Code:
Col A Col B 1Billing Accuracy 2Billing Time 3Credit Check Accuracy 4Credit Check Time 2.1Bill preparation
[Code]....
This is the order in which the data is copied and saved from worksheets in which they are developed. Note that 3 rows (8.1.2.1 through 8.1.2.3) are below 8.1.3 (because the three come from Worksheet 8.1.2 which came after worksheet 8.1). The first four rows came from a Top Level Worksheet. I would like to see them intermixed but in proper order.
I need to compare two colums by number decription for example m344 in one column and fsh344-1 in another. All I want to match is 344. In column a I want to indcate the match by placing an X by each match. View my attachment for reference. I don't know if it makes a difference but the columns are centered in my original spreadsheet.
I'm looking for the VBA command for this function. I tried just recording a macro in where I perform the task but it didn't record anything. Tried it several times even.
See attached file. A colleague is downloading rows of data from a website which contains a number field Excel is currently treating as Text after being pasted in. My spreadsheet includes just a sample of the many rows of data however as you can see the VALUE function refuses to convert these text values to numbers. How these might be converted and why the VALUE function refuses to work in this case?
I am looking for a formula to grab only the numbers withing a cell that has text in it i.e (John Peters142 lp) or (Sally Jones54) or (Terry Cram310 jkb) sometimes there will be text after the number and sometimes not, the format is as shown with no space between name and number but a space after the number.
we work with both Lotus 123 and Excel 2003. Lotus will be gone next year, but for now, the official mean to publish our reports is Lotus. With my work, I copy/paste a Lotus page to Excel. I use the following macro to convert Lotus format numbers (which Excel considers as text) to real numbers:
Sub ForceToNumber() Dim wSheet As Worksheet For Each wSheet In Worksheets With wSheet . Range("IV65536") = vbNullString .Range("IV65536").Copy .UsedRange.PasteSpecial xlPasteValues, xlPasteSpecialOperationAdd End With Next wSheet End Sub
Source : http://www.ozgrid.com/forum/showthre...087#post184087. The problem is that I need to send back this data in Lotus. Excel considers decimal numbers with a coma as real numbers and numbers with a dot as a text. This previous macro fixes that. However, Lotus works the other way. Only numbers with a dot are considered real numbers. So I would need to find a way to code a macro that converts any numbers in the Excel sheet to a number with a dot. It's a bit like doing the opposite operation.
