Extracing unique values based on two lists(2 sheets).
My scenario:
Sheet1 has 2 columns with one million lines. (Master sheet)Sheet1 ColumnA=serial numbersSheet2 has 200,000 lines with same format. columnA= serialsheet2 has some new serials and some existing serials
Serial is 18 digit number saved as text (dunno of that matters)
Solution:
how can I get vba to check serial agaisnt serial ( Sheet2 ColumnA against Sheet1 column A)extract all new serials (unique of sheet 2 only)unique lines to export to new sheet or replace sheet2
I am trying to extract unique values from a column but i can't, i am using excel 2010 and i have try the formula: =INDEX(List;MATCH(0;COUNTIF(C1:$C$1;List)+(COUNTIF(List;List)<>1);0)) but nothing.
Given a long column of values, how do I extract only unique values? Small example > Values of 1, 2, 2, 3, 4, 4, 4, 5 in column A. Would like to extract unique values ... 1, 2, 3, 4, 5 ... and put them in another column.
How can I extract the unique values from the original list but only those whose their SUMIFS is greater than zero? in my example "Blue" , "Yellow" & "Red" should not be extracted.
I have a very large table in Sheet 1, in the following range A10:1:3068.
Column C has the company name, and there are multiple instances of the same company name in this column.
(Columns E to I are part of a pivot table and I have various formulas in A thru D).
In column A I have a value indicating whether the company has 'exposure' (an internal meaning for our sales team). If the company has exposure, then the word exposure is indicated otherwise the cell is blank.
What I need to do is in Sheet 2, create a table that extracts a unique list of company names from column C only where it has the word 'Exposure' next to it in column A.
I would like this to be dynamic so if I change a value in the pivot table in sheet 1 the values in the table in sheet 2 will update accordingly.
I am figuring this is an index and match or perhaps a countifs.
I want to extract all those unique values in column A, if and only if, all their repeated values in A have zeros in B. I mean, if one value appears N times in column A, and for the N repetitions its respective value in B is zero, this value in A must be extracted from the list.
I was trying with count frequency of values, but I dont know how to extract unique value with the required condition.
Example: *ABCDEFGH1********2XYA-121******3XYA-120******4VVT_320******5VVT_320******6VVT_320******7RRT0******8UBN-550******9UBN-550******10PPT_431******11********12********13*Extracted values have all their repetitions with 0 in column B**14VVT_320Value extracted because appears 3 times, and those 3 times its value in B is 015RRT0Value extracted because appears 1 time, and that 1 time its value in B is 016UBN-550Value extracted because appears 2 times, and those 2 times its value in B is 0 Excel tables to the web >> Excel Jeanie HTML 4
I have 2 sheets in a workbook. Column A on sheet 1 has numbers such as 123456, 123457, 123458 ect ect. Column A on sheet 2 has same amount of numbers but mostly different. However there are a few duplicates. QUESTION: How can i write a code that will fit in a new sheet lets say sheet 3 that will pull out only the list of numbers from sheet 1 and sheet 2 that are NOT duplicates?
I have data of different accident year. Now I need to identify different Accident Year and use them in Macro to do certain things. For example in the file attached I am using them in Msgbox. Now to acheive that I first extracted unique values using advanced filter on Column C and later use the different value to POP up the Msgbox. (This is achieved). Now I want to skip this part of doing Advance filter to extract unique value. Is there a way I can know unique value of data through the code itself and use them in program. here is what I am doing currently: I have delted the most of the data cause I am concerned with coulumn containing acc_year only.
Sub test() Columns("A:A").AdvancedFilter Action:=xlFilterCopy, CopyToRange:= Range("C2" _ ), Unique:=True Range("C2").Select Range(Selection, Selection.End(xlDown)).Select Selection.Sort Key1:=Range("C3"), Order1:=xlAscending, Header:=xlGuess, _ OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _ DataOption1:=xlSortNormal Range("C3").Select Do While ActiveCell.Value <> "" MsgBox ("The Year is " & ActiveCell.Value) a = ActiveCell.Row Range("C" & a + 1).Select Loop End Sub
I've had a look at some examples of extracting unique values but it seems quite complex to me!
I have a list of customer names in column A, column B contains a material code (number format), column C contains the material information sheet (text & number format), column D contains the date that the material information sheet was sent (all column headers are in row 1).
Columns E, F & G follow the same format as above but for a different material code - this is repeated further in Columns H, I & J.
All of the material codes are different, but some material information sheets can be the same for some materials.
In column K I need to identify the unique material information sheet values for each customer, as some are duplicated.
Is this possible? There may be some blank values in the row i.e. a customer does not receive a certain material.
Perhaps just an easier way of organising the spreadsheet!
The External column contains data provided by an external vendor. The Internal column contains data compiled internally. The data in the Internal column will always contain data duplicate to the External column, but will also contain unique data not present in the External column. I would normally cut out the data contained in Internal column that is not duplicated in the External column, and paste it into the Differences column, and move the remaining cells in the Internal column up. The result would be the External column data and Internal column data would align by row, and the data unique to the Internal column is segregated to the Differences column, like so:
While not a difficult task for 8 rows of data, the actual daily report contains over 1000 rows, on average. I would like to set up a template workbook, where I can simply open the template workbook, paste the data into both the External and Internal columns, then have the values that are unique to the Internal column extracted from the Internal column and inserted into the Differences column.
The end product would be used daily, with differing amounts of data (from 100 rows to 10,000 rows).
This is a logic based macro that needs to compare values in 1 column above a specific cell and take action until the column has no more data. Here's what I'm trying to do (and I've also attached a sample of desired results):
1) I want user to input starting cell. So I need to create a button for that.
2) This is where the logic begins and I'm having difficulty. From cell defined in button, I move up one cell in that column and compare that value to the original cell.
If the value is greater than original cell then logic needs 2 outcomes:
a) move up 1 cell in column and if that value is less than original cell, then extract that value and copy that value one cell to the right or 1c. b) move up 1 cell in column and if that value is greater than original cell, then move up again, until find lesser value than original cell. Once we find value less than original cell, extract value and copy value one cell to the right or 1c.
I am trying to create a macro that will create a unique list of the values in the same column across 5 worksheets, "Question1", "Question2", etc, and place the list in a new worksheet, "Summary".
The values are in column A in all of the worksheets, and the number of rows in each worksheet will change each day. I need the unique list to be added to the sixth worksheet, "Summary".
Also, after the list is created on the Summary worksheet, I need a count of each field by worksheet and a total. This is how I currently have the Summary set up:
Part Type|Total|Question1|Question2|Question3|Question4|Question5 Name|=SUM(C2:F2)|=COUNTIF(Question1!$A:$A,A2)| =COUNTIF(Question2!$A:$A,A2)|=COUNTIF(Question3!$A:$A,A2)| =COUNTIF(Question4!$A:$A,A2)|=COUNTIF(Question5!$A:$A,A2)
I need to be able to pull information from 5 columns on 5 different pages, and pull all of the unique names out of it. From there, I need to create a list of all of these names. More often than not, this could only be three names, but I still would like this to be automatic because eventually it could be 50 or 60, and manually editing this list would get tedious. Lastly, is it possible to have a list create cells? For example: I have information on row 4, this one will start on row 6. My next group of information starts on row 14. That leaves 7 rows for information. I don't want to leave a large gap at the top of the page, so I'd like to be able to create cells if the list I'm trying to create has more information on it. Seems plausible in my mind, but I'm still new to excel.
There are three sheets in the workbook, Project, Tasks and Details and the expected resulting sheets are RESULT, In_Tasks_but_NOT_in_Projects and In_Details_but_NOT_in_Projects .
But now what I am looking for:
1. Copy the Projects data as is in the RESULT sheet.
2. Then in the Tasks sheet, if the ID matches paste the matching rows under the data from Projects (as in the result sheet with Orange colour)
3. If the ID is present in Tasks but NOT in Projects then copy it into the In_Tasks_but_NOT_in_Projects sheet.
4. Then If the ID and the Name in the Details tab matches with the data in the RESULT sheet then paste it under the ID and Name (as in the result sheet with Green colour)
5. If the ID does not match the ID in the results sheet then copy that row into the In_Details_but_NOT_in_Projects sheet.
The result of the current macro that RHCPgergo worked with are in the last sheet.
The formatting and colour of the rows doesn't matter, it is more of nice to have.
I'm trying to set up a macro that will capture all the unique values in a column, and then create a new sheet for each value. What I've got so far technically works, but it's also adding an extraneous sheet (with a generic sheet name, not the specified name I'm giving the sheets) and also giving me "Run-time error '1004': Application-defined or object-defined error" when it runs.
I have 6 worksheets in my file. In sheets 1-5, column A2:A26 list people's names. Some people's names appears on more than one sheet. Not all cells are populated with a value.
ex. SHEET1 COLUMNA Bill
[Code]....
My attempt was... =INDEX('Week1:Week5-!$A$2:$A$26,MATCH(0,COUNTIF($A$1:A1,"Week1:Week5"!$A$2:$A$26),0))
where the sheets were Week1-Week5 and the values on each sheet was A2:A26. But I think there's an issue with Excel being able to 3D reference for these types of functions.
I'm trying to compile a VBA that would allow me to compare 2 columns "A" in different worksheets (same Workbook) and output any unique values to 3rd worksheet together with the rest of the values in the corresponding row.
I have a list with many names, several of them appearing more than once. I would like to extract the unique entries an then make the list of them.
I can do that using the filter. But can I do it with formulas ? (In order to, whaterever change is made to the first list, get the extracted one immediately updated).
If I have multiple entries with different but repeatable text values in one column - how do I count all unique ones ? Is there a function or does it have to be a pivot table of sth ?
I am trying to populate a tab with all the unique values from a data table. For example, list all the SKUs, SKU Names, Buying Groups, etc. for "Owl Filled Candles" on the "COLLECTION - SKU" tab. For reference, the "VENDOR - SKU" tab works perfectly. I want the COLLECTION tab to do the same thing as the VENDOR tab. The only difference is the VENDOR-SKU tab is pulling data based on a Vendor's name in a drop-down list in B3 and the COLLECTION tab is pulling data based on the Collection name in a drop-down list in B3.
I tried to just copy the tab and reset the reference cells but that isn't working.
This is just a screenshot of my huge data of over 60,000 rows. Owing to the restriction of HTML Maker, I am just showing in less than 30 rows in this screenshot.
I need to extract only the UNIQUE ROWS depending upon the column called "Unique Code" to another worksheet. A particular row or a record is repeated as many as 90 times in this database. I need to extract the whole row which is unique depending upon the column C which is "Unique Code".
I have tried the Advanced Filter option a couple of times but it does not seem to work. Also, the Auto Filter option is not versatile for such amount of data.
I have a column which has about 600 Names, and some of them are repeated, so I want to extract the Unique of them into a separate column, How can I do that?
I need to extract only unique email addresses from all the workbooks saved in C:EDT and its sub-folders. The sub-folders will be yearmonth. So there would be several workbooks in each C:EDT2010JAN, C:EDT2010FEB, C:EDT2010MAR...etc, etc. Also, in the future they would be in C:EDT2011JAN, C:EDT2011FEB, C:EDT2011MAR...Same for 2012, 2013, etc, etc.
In each workbook, the email addresses will be located in Column K of a worksheet called ACCOUNT. There is some other info in the column (Phone, Title, Name), but I don't need that.
I would like the email addresses copied and then pasted into either a new MS Word doc or a new Excel workbook/sheet. All the workbooks that contained the email addresses should then be closed.
I have a single excel data sheet with 10 rows of header information and then multiple rows and columns of data
I need to extract the 10 rows of header data plus the rows for each unique record in Col A into its own separate worksheet, with the work sheet name being the unique record from Col A
To further add to the challenge, the data in col A may have "/" in so will not comply with excel sheet naming convention so would like an error message to remind me to manually change a sheet name.
I attach an dummy data sheet just to show what I mean!
