I have the following
1) directoryA
2) ColA - Contains oldFilename
3) ColB - Contains newFilename
I simply need to rename files from values in colA to colB working with directoryA with the extension of .jpg
I have an excel template that needs to be copied multiple times and each sheet needs be named according to a list in an excel spread sheet. I also have a formula in the template that needs the value copied instead of the formula.
I got this script from an site and tried it. It runs but I don't see any spread sheets.
strComputer = "."
Set objWMIService = GetObject ("winmgmts:\" & strComputer & "
ootcimv2")
How can I set the SAVE AS file name to equal A1's cell contents? (More specifically, when I need to rename an existing open file and place my cursor in A1 and hit Save As, I need to new file name to automatically populate A1's cell contents so I don't have to retype the contents of A1.)
View 1 Replies View Relateddata below is in sheet1. Upon pressing a button, it'll break into
can this be done? data means any number of columns with data.
sheeta:
row1: a---001-data
row2: a---002-data
sheetb:
row1: b---005-data
sheetc:
row1: 003-data
row2: 004-data
a----001-data
a----002-data
b----005-data
c----o03-data
c----004-data
I am looking for is a basic macro that will copy and paste cells down as per number of entries or rows in a particular column
As an example, lets say my static data runs in Column A, from A1 : A10.
Cells B1 through to E1 each contain a seperate formula
How would I get the range B1:E1 to be copied and pasted a number of times that corresponds to the last entry in column A (in this case A10) ?
ie VBA code that recognises that the entries end at A10 and that the range B"#":E"#" must be copied and pasted down until the last entry in Column A
I just copied and modify this code; What I want is to add sumting on the file name, without changing, file path, original file name and file extension
Say : I get the file
D: DocsMemo.docx
I can paste it to the fnpath with a changed filename
C: \_Temp Memo_BPMC-0001.docx
Heres the code
[Code] .....
I've written most of the code that I need... the problem is that I don't know how to properly select, move and rename the pdf from excel.
I have a popup to select the file, and I know what I want it to be called, what I need is the code to move and rename a non-excel file from inside a macro.
Here is what I have so far:
Sub AttachPDF()
Dim LastName As String
Dim Street As String
Dim callDate As String
Dim FilePath As String
Dim HouseNumber As String
Dim FullFileName As String
Dim FileName As String
Dim Scan As String
Range("D32").Select
'Ask user what file they want to attach.
Scan = Application. GetOpenFilename(FileFilter:="Follow Up Scan, *.pdf", Title:="Please Choose A PDF To Attach")
If Scan <> False Then
I am using this code for 2nd coping my file and rename it automatically......
[Code] .....
I want when i want another copy always my path should be "C: estabc.xlsm"
and
For new file in same path "C: estdef.xlsm" an input box ask for the name("def.xlsm") "what new name u want for this new file".
And I input the new name for my file and done.
I've found these functions to assist in renaming a file.
However, I'm not quite sure how to apply to code.
I have some code which will look for a specific file in a given location. Is it possible to use VBA to rename that file without opening/re-saving and killing the specific file?
View 8 Replies View RelatedI am trying to write a VBA that rename an Excel file by adding todays date at the end of the file name. For example rename the file
C:Documents est.xls to C:Documents est020221.xls 020221 is todays date
how to write a macro in excel to rename a file with a date in a cell (A1) from that file?
View 5 Replies View RelatedI am using the following code to rename a file that is being pumped out by another program.
Sub CopyAndDelete()
Name "C:Program FilesPATH1234567890_3.tvr" As "C:Program FilesPATHNEWNAME.tvr"
'
End Sub
The problem I have is the the file being pumped has a varible name. The nly constant is the _#.tvr. The first 10 digits are random numbers.
I have persued the "rhymn and reason" for the file name with the vendor and have been told it can not be changed and is random. The "_#.tvr" piece comes from the number of reports I have generated for the day. So I have 5 prefined reports that run each day and can recreate the _0.tvr through _4.tvr but the first 10 are random each time.
I would like for the rename to "ignore" the first 10 digits then looking at the file name.
I have the following code, which I use to open up a .xls file generated from Crystal Reports:
Application.ScreenUpdating = False
Application.DisplayAlerts = False
Dim fexport1 As String ' variables for the exported file
Dim fexport2 As String
Dim wb1 As String 'variables to change between the opened workbooks
Dim wb2 As String
strTemp = "Please Choose The Exported File"
MsgBox strTemp
fexport1 = Application.GetOpenFilename("Excel Files (*.xls), *.xls)")
If InStr(fexport1, "False") = 0 Then
Workbooks.Open fexport1
wb1 = ActiveWorkbook.Name
Else
strTemp = "Operation Canceled"
End If
The problem is that Crystal Reports generates the file with an invalid worksheet name (it contains a backslash) and I do not have access to modify the Crystal Report. Althought the file can be automatically repaired by Excel when manually opened, the macro chokes and the "Application.DisplayAlerts = False" does not fix it. The only solution I can think of is renaming the worksheet without opening the file.
I think my code is close but I keep getting an error "Run-time error '1004': Application-defined or object-defined error"
I am trying to rename the active workbook by appending yesterday's date onto the filename, using the Save As.
I might be going about this all wrong anyway. My user needs the macro to save, rename, and close the renamed copy of the workbook but to leave the original workbook open. I'm trying to do it in steps so I might be doing this the hard way. However, my code to Save As is below:
Sub SaveAsRename()
Dim CurrentPath As String
Dim CurrentFileName As String
Dim NewFileName As String
Dim Today As Date
Today = Int(Range("A3") - 1) 'Cell A3 contains the =Today() formula
CurrentPath = ThisWorkbook.Path
CurrentFileName = "QU Backhaul Dispatch "
NewFileName = CurrentFileName & Today & ".xlsm"
ActiveWorkbook.SaveAs Filename:=CurrentPath & "" & NewFileName
End Sub
My Locals window has all of the correct values right up to the ActiveWorkbook.SaveAs which is where it fails.
I am trying to move and rename an excel template file using a macro. My code works fine when it is moving the file locally on my C: drive. However, when I try to do it on a mapped network drive I get a Path/File access error. Here is the relevant code:
[Code] ......
I tried it both ways that are commented out - both give me the error. I have permissions to read/write in all relevant folders. What am I missing here?
I've added an word object to my excel sheet as an icon. The only problem is that it shows the word icon then under it says 'Microsoft Word Document'. This might be an obvious and silly question. But how do I Rename the 'Microsoft Word Document' to a title of my choice?
View 2 Replies View RelatedI want a macro. when i run this macro pop up a input box and ask for copy of master copy and asked for rename the file...
E.g. I have a master file in "z:42766decmasterfile.xlsm
When I click macro then macro do a copy of masterfile and rename it according to choice...
I am trying to copy a file, rename it, and save it to a new folder. I keep getting a "Compile Error ; Syntax Error" at line FileCopy (ImagePath & oldName, NewPath & newName). I am using Excel 2010.
FileCopy (ImagePath & oldName, NewPath & newName)Sub RenameFiles()
'Renames file based on "sheet 1" - Column 1 Old file name - Column 2 New file name
Dim oldName As String
Dim myfile As String
Dim newName As String
Dim ImagePath As String
Dim NewPath As String
[code]....
The macro below renames the current sheet to the cell value of D4:
Sub Rename_Sheet()
With ActiveSheet
.Name = Range("D4")
End With
End Sub
What can i do to the code above so that it will rename the sheet based on 3 cell values instead on only 1 value?
I want the end result to look like this with x's between the values:
D4xD5xD6
Say you have a userform with 10 TextBoxes, let’s call them TxtN1…TxtN10 and your workbook has 10 sheets, say “Sheet1”…”Sheet10”. Now if one wants to code a procedure to rename those worksheets when the user hits a command button it’s simple enough.
Sub Rename_click()
For i = 1 To 10
With Sheets(“Sheet” & i )
. name = TxtN & i
End With
Next i
End Sub
But now if the user then changes the textboxes TxtN1…TxtN10 to a set of new strings it’s obvious that the following coding segment will not work:
For i = 1 To 10
With Sheets(TxtN & i)
.name = TxtN & i
End With
Next i
It goes without saying that the program will try to select the worksheets with the new name (and they obviously don’t exist yet)…
I am having trouble creating a macro that renames all excel sheets using cells on Sheet1.
See attached, I want to rename all excel sheets (renamed as "1", "2", "3"....."50") as "9999", "10000", "10001"..."10045", found in Sheet1, renamed as "Base". I will change the cell values everyday (range Base!A5 to Base!50) - and will rename all the sheets again.
Before: before.jpg
After: after.jpg
Posted this on another forum. [URL] .....
View 1 Replies View RelatedI'm looking for a way to rename an object (which is an image) based cell values. Not to sure where to start.
View 4 Replies View Relatedi would like to copy a sheet to another sheet, rename, copy and paste special values. but after the sheet is copied to another, the macro stops working...?
Sheets("Proposal").Copy After:=Sheets("Proposal")
'rename...
ActiveSheet. Name = "ProposalEmail"
ActiveSheet.Copy
ActiveSheet.PasteSpecial Paste:=xlPasteValues, operation:=xlNone, skipblanks _
:=False, Transpose:=False
I need a macro to name a file using values from two cells, one is a supplier name that is in a drop down box, the other is a count. Both cells are named in the worksheet and the macro below works on the count, but not the supplier.
Sub Order_Number()
Dim count As Integer
Dim Supplier As String
Range("F13").Select 'where A1 is your cell you wish to store the count in
count = ActiveCell.Value 'picks up last count value on spreadsheet
[Code] .......
I am trying to summarise data from 50 different files (updated by 50 different users) into one file in one place. To do this I created a simple sumif function that links to those files. This sumif works correctly when those files are open. But when I open my output file after changes have been made to one or more of 50 input files, sumif function doesn't work when I hit update at the file opening pop up question and get #value error. If I start opening those files this error goes away and it works great again.
View 2 Replies View RelatedBasically, I have a column that contains a list of names of files without the extension, ie "A2=File1" What I want, is for excel to open the file associated with the name in the column, "(A2).xml", and extract a value from that.xml file and insert it into B2.
I have searched and all of the examples I find aren't quite what I am looking for. I have an add-in that works exactly the way I want it, but does not extract certain values that I need it to. This is a commercial add-in so I don't have the source code for it or else this would be a snap.
I am trying to create a macro that opens a .pdf with the name of the pdf equal to a cell value. For a simple example: Cell "A1" contains the text "distinct" and I want the file prexisting file "C:distinct.pdf" to open when the macro is ran.
View 3 Replies View RelatedI have a file which I am using at work to compile production shift reports. I have created a sheet called Live Report and created a macro called 'New Day' that copies the entire sheet and renames it as yesterdays date (using a separate sheet called Data with a =today()-1 and text formulas thus the sheet tab for 14/2/07 is called 14 Feb) it then clears certain cells on the Live Report sheet so that information can be entered again.
My problem is that I want to now create a table of values that compiles values from each sheet for the month. What I wanted to do was have the names of all possible sheet tabs listed in column A and then as we get to each date the links will become active for the 20 or so values on each sheet. So each row will have the sheet tab name in column A and then columns B to R will have links to that sheet. As I am lazy and the linked values will always be in the same location I just wanted to drag the first row of links down the table using the value in Column A as part of the filepath/link.
My problem is no matter how much I try I can't use cell values in filepaths. If this is impossible I would like help with a macro that can find the right row in the table based on todays date and copy certain information.