Rename Object (image) Based On Cell Values
Jul 9, 2014I'm looking for a way to rename an object (which is an image) based cell values. Not to sure where to start.
View 4 RepliesI'm looking for a way to rename an object (which is an image) based cell values. Not to sure where to start.
View 4 RepliesPosted this on another forum. [URL] .....
View 1 Replies View RelatedI am having trouble creating a macro that renames all excel sheets using cells on Sheet1.
See attached, I want to rename all excel sheets (renamed as "1", "2", "3"....."50") as "9999", "10000", "10001"..."10045", found in Sheet1, renamed as "Base". I will change the cell values everyday (range Base!A5 to Base!50) - and will rename all the sheets again.
Before: before.jpg
After: after.jpg
I'm looking for vba code to use that will incrementally rotate an image based on values entered within a cell of an Excel spreadsheet.
I have two graphics, one is the face of a dial and the other is the pointer very much like a speedometer. I can achieve the desired outcome using two excel charts, one overlaid on top of the other, but, this doesn't give me the visual effect I'm looking for.
I'm using the face of the semicircle dial as the background image and I have a separate image for the pointer. When a value between 1 and 100 is entered in cell O3 i would like the pointer to rotate to that position on the dial. The pointer is to have a fixed position and arc left to right where the value of 1 is left-most and horizontally aligned, and for the value 100 the pointer would point in the opposite direction.
Is there a way to have image box display an image with a name matching data from a cell? example: if I type "hello" in cell a1, Image box will load image named "hello". And display new images by changing the name in cell a1. Note: the images will be located in a permanent folder.
View 3 Replies View RelatedSay you have a userform with 10 TextBoxes, let’s call them TxtN1…TxtN10 and your workbook has 10 sheets, say “Sheet1”…”Sheet10”. Now if one wants to code a procedure to rename those worksheets when the user hits a command button it’s simple enough.
Sub Rename_click()
For i = 1 To 10
With Sheets(“Sheet” & i )
. name = TxtN & i
End With
Next i
End Sub
But now if the user then changes the textboxes TxtN1…TxtN10 to a set of new strings it’s obvious that the following coding segment will not work:
For i = 1 To 10
With Sheets(TxtN & i)
.name = TxtN & i
End With
Next i
It goes without saying that the program will try to select the worksheets with the new name (and they obviously don’t exist yet)…
I don't know if this is possible or not but I am looking for a way to hover over a cell and have an image appear. If this is not possible is there a way to add something like a comment on the cell but have it be an image not text? Currently I have the cell hyper-linked to the image but it would be nice if I did not need a whole other window to pop up.
View 3 Replies View RelatedI've added an word object to my excel sheet as an icon. The only problem is that it shows the word icon then under it says 'Microsoft Word Document'. This might be an obvious and silly question. But how do I Rename the 'Microsoft Word Document' to a title of my choice?
View 2 Replies View RelatedThe macro below renames the current sheet to the cell value of D4:
Sub Rename_Sheet()
With ActiveSheet
.Name = Range("D4")
End With
End Sub
What can i do to the code above so that it will rename the sheet based on 3 cell values instead on only 1 value?
I want the end result to look like this with x's between the values:
D4xD5xD6
Following code from net and applied.
But runtime error on the highlighted line: "object doesn't support this property or method
Code:
Private Sub cbAddImage_Click() With Application.FileDialog(msoFileDialogFilePicker)
.AllowMultiSelect = False
.ButtonName = "Submit"
.Title = "Select an image file"
.Filters.Add "Image", "*.gif; *.jpg; *.jpeg", 1
[Code] .......
I'm looking for a solution that will rename the sheet to whatever is enterd into particular cell.
Ie: cell A1 = "Joe Bloggs", then the sheet is renamed to Joe Bloggs
Also, on the same sheet, is it possible to change the sheet tab colour based a data in a different cell?
Ie: cell B1 = "Parts", then the sheet tab colour changes to pink.
I am looking for a macro to rename tabs based on information in A1 on each tab. The thing that is causing me issues is the cell A1 has a formula in it and it changes on a daily basis with days of the week but the tab only updates when i double click A1 and press enter.
I need it to update automatically.
Is it possible to write a macro that will rename a worksheet based on the value of the cell?
For instance, if cell a1 has the value Test, the worksheet should be named Test. If I change the value of the cell to say Test 1, the worksheet should automatically rename itself to Test 1.
I have two bitmap images, and I would like to show only one image at a time, based on the content of another cell's pull-down list. If the user selects "AIR", then display the AIR image. If the user selects "SERVO", then display the SERVO image.
View 2 Replies View RelatedRunning a macro that would insert product images in to a sheet based on a SKU that is in a different column. My sheet has an image in Cell A3 based on the SKU code that is inputted in to D3. All of my images are stored in F:Images I will have about 500 SKU's that all need images and will be named the same as the SKU I enter in to Column D.
Can this be done via a VBA script?
Step1: Type the picture name that is store somewhere in the computer (C:/MyDocument/Pics)
Step2: After typing the pic name into the cell, the pic that is the same name as the cell text will be display (Type "apple" and the other cell load out the apple pic that is stored)
How do I load an image based on the cellref value already in the sheet? I have pictures in a worksheet labelled picture 1,picture 2. If Cell A1 = 1 I want it have picture 1 loaded in that cell. if cell a2 = 2 load picture 2 in that cell. also if changes to =2 replace picture1 in a1 with picture2.
View 2 Replies View RelatedQuestion: I would like to have two pictures (one in cell B2, the other in cells D1-C10 to I10) display based on a data validation list that I have in A1. So, for example, if you click U.S.A., two pictures for U.S.A. show up; if you scroll down to Canada, two pictures show up. If you're interested, I have included the history of what I have tried in the past.
History of what I have tried:
I used this code before [url] , but that makes all pictures but 1 invisible and I need two.
So then I used this one,
Sub HelloWorld()
'Message box to say hello
MsgBox " Sub GetPicture()
Dim oPic As Picture, imgFlag As Range, imgMap As Range
' Loop Flag and Map images
'imgFlag = Worksheets("Image").Range("B1")
'imgMap = Worksheets("Image").Range("D1")
For Each oPic In Worksheets("Summary").Pictures
If (oPic.Name = Worksheets("Image").Range("B1").Text) Then
oPic.Visible = True
oPic.Top = Worksheets("Image").Range("B1").Top
oPic.Left = Worksheets("Image").Range("B1").Left
ElseIf (oPic.Name = Worksheets("Image").Range("D1").Text) Then
oPic.Visible = True
oPic.Top = Worksheets("Image").Range("D1").Top
oPic.Left = Worksheets("Image").Range("D1").Left
Else
oPic.Visible = False
End If
Next oPic
End Sub"
I receive a workbook each day with approx 500 tabs of call data and I would like to relabel all the tabs with the user names. The user names are in a merged range "A7:M7". I'm having difficulty getting the following script to rename the sheets. Currently the values in "A7:M7" look like "User: ADAM ENGEMANN-558".
I am trying to delete each occurrence of "User: " while naming the sheets as well as removing the merged range before doing so that the names are in A7 only. The sheet names should look like "ADAM ENGEMANN-558", or, ideally just "ADAM ENGEMANN". For some reason my code will not modify the cells. (See attached example)
This works if I manually unmerge the cells before running and remove the ":".
VB:
Sub RenameSheets2()
Dim ws As Worksheet
For Each ws In ThisWorkbook.Worksheets
If ws.Range("A7").Value <> "" Then
[Code] .....
This his how I modified it but it doesn't work on the supplied sheets. Please note that if I manually insert some blank sheets into my workbook and merge the cells etc it does work. There seems to be something odd going on with the sheets they are giving me. (they aren't protected)
VB:
Sub RenameSheets2()
Dim ws As Worksheet
For Each ws In ThisWorkbook.Worksheets
If ws.Range("A7").Value <> "" Then
I tried adding the following to remove the merged ranges and remove 'User: ' from the names
Range("A7:M7").Select
With Selection
.WrapText = False
.MergeCells = False
[Code] ......
CallSample2.xls
What I'm trying to do is from a template worksheet that I have in a workbook with other worksheets, I'm trying to come up with code that will create a new worksheet based on the template (copy), increment the invoice number, and rename the worksheet tab to be "Invoice # xxxx" (new invoice number from prev. step.).
I have figured out how to use a button on the template to execute, but as I said my VBA skills are lacking to say the least.
I have a macro attached with attached file; it will list the files then will re-name the files based on other cell
example;
Cell A2 = New.mp4
Cell B2 = ggffrr.mp4
so the file New.mp4 will be renamed to ggffrr.mp4.
it is working fine but the location will be always desktop or documents location
i need from the macro to rename the files and to keep them in the same location.
I have 5 sheets. In the first sheet I have set up 4 cells where I want the contents of them to automatically rename the other 4 corresponing sheets.
Eg.
In Sheet 1, Cell B6, I want the contents (which will be text) to be the name of sheet 2 automatically.
In Sheet 1, Cell B7, I want the contents (which will be text) to be the name of sheet 3 automatically.
I have a spreadsheet with two bitmap images inserted into it. In cell E2, I will enter a number, either a 1 or a 2. if I enter a 1, I want only the first image to be visible. If I enter a 2, I only want the second image to be visible. Is there a way to accomplish this (hopefully without the need for macros)? I've attached a spreadsheet as an example of what I'm trying to do. Also, note that I'd like the images to be stacked on top of each other so that they show up in the same place regardless of wether there's a 1 or a 2 in cell E5
View 13 Replies View RelatedI have found Displaying an image based on text contained within a cell. which appears to be a very similar question, but no steps to follow.
Basically I have a folder with around 300 images in it, each is called ProductId number.jpg
eg Z99S1234567.jpg
In my sheet I am using the same ProductId number and would like to display the product image on the sheet. I have A1:D19 as spare space Lookig at the info I have found the image will have to go into a cell, so can I break all the rules and merge cells to fit the image in, or do I need to make a single cell big enough or can I use VBA to import the image somehow to a specific place on the sheet.
There will only ever be one looked up image on the screen at a time.
I'm trying to display a different image based on the contents of a cell. For example if cell A1 = "Gerrard" I would then like to display a picture of Steven Gerarrd. Is this possible? If so can anyone give me a steer in how I might acheive this.
View 3 Replies View RelatedI am building a workbook. The data we are tracking is all in one xml file, which i have mapped to 3 different worksheets(customers, invoices, inventory). On the customers and inventory sheet I have an interface for creating a new customer/product/invoice. I used the macro recorder to make the macro's to do these three things, but could use help on a couple of other functions as I don't actually know VBA. I need to be able to automate editing of existing records by having a button to press on the each sheet that will open an input box that asks the user which invoice number, customer number or product number he would like to edit, then copy that record to the interface for editing, then another macro to replace the existing data with the newly edited data. It would also be wonderful if when creating or editing an invoice it could create a copy of the interface worksheet and rename it as the invoice number. The first row of each datasheet is blank, and each of the interfaces have formula's for importing the information copied to row 1 from the data tables. the second row of each datasheet contains formulas for importing data from the interface. Any help would be terrific...I know you guys are excel gods and I will forever be in your debt if you can help me out....thanks in advance, I'll be studying my butt off until I figure this out
I have a master sheet where users can change the name of 20 different sheets in the workbook by changing a cell value on the master sheet. Here is the code:
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rCell As Range
If Target.Cells.Count > 1 Then Exit Sub
[Code]....
The next step which I am having issues with is hiding the sheets. I want all sheets in the workbook to be hidden except for the master. I only want the other sheets to be visble if the user inputs a name on the master sheet.
So if the cell contents on the master sheet, say "B9", is blank, the sheet in the workbook that corresponds to that cell will remain hidden. If the user inputs anything, say "Sheet1", in cell "B9" on the master sheet, I want that sheet to become unhidden and to be named "Sheet1"
Can a macro rename Excel files based on a cell's contents? The problem maybe that I download these files en masse from a website and they all have 54-character long randomly generated filenames which I can rename by selecting all and then use the rename function to get a series of filenames like a, a(2), a(3), ... but I would rather have the files renamed based on the text that exists in cell B1 which is the title of the report. I also read somewhere that this kind of macro only works if the tabs have names like "Sheet 1"
View 1 Replies View RelatedI want to rotate an arrow image to exactly a value entered in a cell (dropdown of values between 0 and 180)
e.g. if the value is 0 it should point south, if East or West 90+ or - and if pointing North 180. Also all value between these e.g. 45 for South East or South West etc.
I need some VBA I guess to do this but I don't know how.
When the arrow has stopped, I need the macro to end cleanly so that the user can input other values.
Is this even possible?
I need to link an image to a cell value and display the selected image in a new sheet of the same excel. I am attaching samplefile for easy reference. The requirement is, from the workout sheet when I select from drop down list, then the corresponding cell value appears in Parameter sheet in C9 cell.
There are four images copied in Parameter excel. The given image has to be selected and linked to the C9 cell value. Based on the selection that particular image should be shown on Sample Picture sheet. Here based on the selection only the image should reflect here.