I have a dilemma.
1.I want to be able to a have a cell be filled with a certain value when the user enter data in Column C.
2.I know that this can be accomplished by a formula, but my spreadsheet will work my efficiently with a macro.
3.I do not know much about VBA but I believe that I will need a macro for each sheet that fills in the word.
Is there a way of a user can add a number in a cell and this would hide a different amount of columns.
OR :
Ideally I would prefer a drop down with dates and the user could select a forward date and all the columns with dates up to that would appear. This would mean they could look as far our as required and all unwanted data would be hidden.
On sheet 1, I have dates in column A, then numbers under LabA through C. On sheet 2, I would like the contents of columns B, C, D to autofill when entered. However, I would like to display only the last entry. For example, Lab A (column B) is currently showing "7" in cell B6, if I enter a number in B7, I would like for sheet 2 to autoupdate cell B3 and display that new entry instead of the "7".
View 1 Replies View RelatedExcel 2003, I have a list of products with corresponding prices located on a hidden worksheet. I have a spot on another worksheet where users can select a certain product and next to that cell there is a column for price. What I want excel to do is auto-populate the price cell based on what product the user selects. For instance, if the user selects OD2000N, then I want the price to auto-populate with the corresponding price that is found on the hidden sheet. Like I said before, I know this has probably been answered, maybe even mulitple times but I can't seem to find the appropriate thread.
View 9 Replies View RelatedI have a percentage in R3.
If I make an entry in D13 then I want the R3 to be duplicated into C27 otherwise C27 should be 0.
I have a table that i use for a customer database. and the end user adds new customers to this table, what i would like is for a message box to pop up whenever cell B2 matches an entry in a column in the customers table. the table starts on row 25, and the column i would like to check for duplicates is column B. I would like the message box to give the user the message "A customer by this name already exists, Would you like to load this customers file?" If the answer is yes, then the row that the match was found on would be copied and pasted onto row 1. if the answer is no, then nothing else happens. I hope this makes sense, i am posting this sheet of my workbook for reference.
View 8 Replies View RelatedI have a worksheet in which i am asking a user to enter manually a number in cell E3. Suppose the user starts with 100, then the next time he is entering in E3 he shoudnt be able to enter 100 nor any number less than 100. I dont have a range for the numbers that the user is going to enter.Therefore countif function does not work. Is there any way that i an store the number taht the user enters first in cell E3 and then use that database to avoid the user from entering the same or a number lesser than that number.????
View 2 Replies View RelatedI am trying to display a message box for the user if there is "agency" in cell o8 but nothing in p8... I tried the following code but it doesnt work..
If Range("o8").Value = "Agency" And Range("p8").Value = "" Then
MsgBox "Please provide name of agency in cell p8"
Sheet9.Shapes("cross").Visible = True
Else
I have a file where I need the user to fill in a value in a single cell (A1) in order for the data validation I have set up in column B to work. Can I set up a second data validation in the cells in column B? Or is there a way to enter a data validation in cell B11 that would error the user if A1 is not filled in, and circle the cell (A1) that they need to fill in? B11 currently returns the sum of B3:B10.
A
B
1
Straight
2
Time
3
Sun
4
Mon
5
Tues
6
Wed
7
Thurs
8
Fri
9
Sat
10
Sun
11
Total Overtime
based on user date ranges entered on sheet1, I'm trying to write code that will write each month of the date range on other sheets across the 2nd row. at this point I'm getting "object required" error at "Set DateStart = Cells(2, 6)"
I also want the date format to be mmm-yy (Mar 14) on the sheets even if sheet1 has a different format. I tried using sourcerange instead of DateStart, but that didnt work either.
Code:
Dim projStartDate As Date
Dim projEndDate As Date
Dim DateStart As Date[code]....
dont know if this can be done using a formula rather than VBA...but is there a formula that would change the countif range based on another cell entry. so the formula below has a column range of 2...so the other cell entry would be '2'.
=COUNTIF(B1:C1,"=Y"). If i then changed the cell entry to '4' the formula would change to. =COUNTIF(B1:E1,"=Y")
I will try putting the Code Tags in correct this time, I think I figured out what I have been doing wrong.
This code will allow one cell to make a sound when a condition is met. I am trying to have each cell stand on its own. Example cell A1 would sound a Ding if the number >100 and cell A2 would sound a Tada if the word Cat would be returned ....
I'm trying to create a spreadsheet that will add a value to one column from one specific cell. For example: I want to enter a name in cell G10 and add that entry value enters in A1, then erase that name and enter a name in G10 again and that entry value enters in A2, and so on and so forth.
View 2 Replies View Related=IF(E14<=0,0,IF(N9="yes",MAX(E15*C15,30),30))
I am currently using the above formula and need to make an addition to it.
If D8 is greater than 9000 and less than 9999 then the entry will be 35 rather than 30. Any other entry in D8 would leave it at 30
If I have 3 fields: zip code, city and state; is there a way where I can have the user of my form enter their zip code and it will populate both city and state. I have the data, I just dont know exactly how to code it.
View 9 Replies View Relatedi'm trying to basically use VBA, so that when a list of work tab names are entered into a column in say Sheet 1..these tabs are then selected.
View 4 Replies View Relatedi'm sure this can be done but i cant get an angle on the method. i want to use VBA to put a formula into cell G3 based on the users entry in cell D3 so, for example the user enters M in cell D3 and the VBA code puts the formula "if D3="M",A3,0"into cell G3
i know i could use a formula in the cell but i want it to work with multiple entries so i figure VBA is the way to go.
I would like to write the code or create a macro that will execute when the value of a range of cells is greater than null. The macro or code that I would like to execute will UNHIDE a group of consecutive rows.
View 14 Replies View RelatedI have a workbook with 3 worksheets which contains a single spreadsheet where the user enters data and 2 worksheets containing all the named ranges and formulas(divided up by product model) used on the data entry worksheet. What I've been trying to accomplish is to choose one worksheet based on which product model I select on the data sheet.
View 1 Replies View RelatedI need to force our salespeople to enter information in a cell based on a condition. This is the condition: If I5=3, then I need to move the user to cell I3 with a message that says "Enter miles to site" -- I don't want them to be able to move from the cell until they enter the information. If I5 does not equal 3, then I don't need anything to occur. I need to apply this code to four separate worksheets in the same workbook. Also, they will be entering a number in cell I3, so is okay to leave I3 formatted for Number or General Number? Note: This question is also posted at the following link, but has not yet been answered by that group: http://database.ittoolbox.com/groups...dition-2270643.
View 2 Replies View RelatedI want to require that certain Text Boxes in a User Form have entries and I am coding the message box improperly.
View 7 Replies View RelatedWe need to have various users input data into a spreadsheet, so I have created a userform. Just need some code with the submit button to populate the central sheet, I think that I will need it to open the sheet, paste the data, save and close it.
This is my submit button as it stands, with the form and spreadsheet in the same workbook:
Private Sub btnSubmit_Click()
Dim RowCount As Long
Dim ctl As Control
RowCount = Worksheets("Sheet1").Range("B1").CurrentRegion.Rows.Count
With Worksheets("Sheet1").Range("B1")
.Offset(RowCount, 0).Value = Me.coboPropSalutation.Value
[code]....
I have a spreadsheet where for traceability purposes, I get some vba to enter elsewhere on the sheet, the date and time that data is entered into a cell. Is it possible to also somehow capture the name of the person entering the data. We are on a network, so the pc does "know" which user is logged in.
View 8 Replies View RelatedI want to change data through a user form and disable users from going around my form. I want users to see the underlying spreadsheet as the form manipulates data.
If I enable a form in Modal mode users can bypass the form. If I use it without modal form I can't change data from my form. I seem to be in a catch 22.
I have a sheet that I fill out with customer data then print and start over with the next customer. This requires me to tab and delete through the sheet before starting the next entry and I am wondering if there is some way to auto clear the unlocked cells based on a single entry IE when we entered new data in the 1st field this would clear the unlocked cells and make them ready for new data?
View 14 Replies View RelatedI am trying to do with data validation, trying to stay away from vba on this... and it is probably very simple:
Cell A1, they can select Rice, Cheese, or Rabbit
I want to use custom data validation on B1, so that if A1 = Rabbit, they can only enter 1. If it is blank or the other two choices, they can enter 1 through 10.
Can I do that with data validation? I can't get any if thens to work in it.
I have the following formula in cell H2:
=AND(EXACT(G2,UPPER(G2)),(LEFT(G2)>="A")*(LEFT(G2)<="Z")*(MID(G2,2,1)>="0")*(MID(G2,2,1)<="9")
*(MID(G2,3,1)>="A")*(MID(G2,3,1)<="Z")*(MID(G2,4,1)>="0")*(MID(G2,4,1)<="9")*(MID(G2,5,1)>="A")
*(MID(G2,5,1)<="Z")*(MID(G2,6,1)>="0")*(MID(G2,6,1)<="9")*(LEN(G2)=6))
I would like to prohibit data entry in G2 if H2 reads "false" and allow data entry in G2 if H2 reads "true" .
i am trying to find a way to automatically copy information from a worksheet on my computer([list.xls]-List of accounts) to a worksheet on a shared folder([summary.xls]- accounts that have paid)
example:[list.xls]Sheet1!A:A has account numbers, C:C has account balance and D:D has notes on account.
If D:D is "paid", copy acc# to [\foldersummary.xls]Summary!A1, balance to B1 and notes to D1.
If D:D is "payment pending" do same as above but in row 2 and so on.
Trying to write a formula that looks for the first number in the same row, then returns the value in that column in a different row. In the example included, cell A-7 should contain the formula. Within row 7, determine the column where the first number is listed (column D in this case), then return the value listed in row 3 of that column ('C' in this case).
I've tried Lookup, Index, and Match functions, but can't seem to get the right combination.
I'm learning 'on-the-job' to code VBA macros and about a week ago I asked a colleague to test (UK/Australian) date entry into a textbox on a userform. I wanted to ensure users can enter virtually any acceptable date format. About 10 minutes after sending the colleague the workbook, she advised that inputting 29 February and a year that is not a leap year had the effect of showing the textbox date in reverse and transferring that date to the workbook with the year indicated as "29" eg. 06-Feb-29.
Since then, I've spent a good deal of time seeking a correction to the code. I've tried scripts for 'If IsLeapYear' with the 'MonthLength = 29' etc, various other if statements and shuffling the original date order of my code. The unadulterated code is below. Does anyone have an answer (other than an Error Handler with a msgBox, informing the user that the date format is wrong)?
Private Sub txtMonth_BeforeUpdate(ByVal Cancel As MSForms.ReturnBoolean)
Dim dDate As Date
dDate = DateSerial(Year(Calendar1), Month(Calendar1), Day(Calendar1))
dDate = txtMonth.Value
txtMonth = Format(dDate, "dd-mmm-yy")
On Error Goto EndMacro
Exit Sub
EndMacro:
MsgBox "The date format you've entered is not a valid format!"
txtMonth.SetFocus
On Error Resume Next
End Sub
