I found this code and am trying to use it to update the filter in my pivot table (sheet 6), based on the data validation selection in sheet 1, but when I make my selection on sheet 1, nothing happens.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim ws As Worksheet
Dim pt As PivotTable
Dim pi As PivotItem
Dim strField As String
strField = "Region"
[code]....
From what I understand there's no way to do this without using macros. I would perfer not to use macros, but I need my PivotTables to auto-refresh anyways and apparently that will require a macro, so oh well. I'm very new to macro coding so I can't seem to successful apply any of the previous threads about this to my sheet.
I just need my pivot table on sheet "Customer" to filter the customer field based on the value in cell C1. Also I need to make sure the sheet doesn't "freak out" if the value in C1 is either blank, or is a customer value which doesn't exist in the table. Preferably in this scenario it would display nothing on the pivot table, but I don't know if that's possible. I want the sheet/macro to allow an invalid filter value in C1 just so the sheet doesn't lock up until it is corrected.
I also need my workbook to auto-refresh all the pivot tables is that's easy to code in as well.
I try filter a pivot table based a cell.
[Code] .....
Attached File : FilterPT.xlsx
Is it possible to set up the second level of a report filter based on the value of the first report filter. I have a pivot table that needs two report filters: first is the location and the second is the department. What I want to do is have the user be able to select the location and then only show valid departments for that location. I know that this is possible if I set up a form and have the second field be a query against the first. I can create a calculated field but I cannot put that in the report filter area.
View 2 Replies View RelatedI have a table with job numbers in one column and sub tasks for each job in a seperate column. I want to control the filter in the jobs column with a data validation cell. The data validation cell has all the job numbers in it and when I select job number "XYZ" in the data validation cell all other jobs are filtered out of the table.
View 1 Replies View RelatedI have a named range of values on Sheet2 (GPI). Sheet1 is an OLAP pivot table containing row label (GPI 14) and values (Net Rx Count) only.
Unfiltered this list is over 7,000 rows. I need VBA code to display only those rows where the GPI 14 value matches any value in the named GPI range on Sheet2.
In other words how can I display the select rows without manually selecting the items of interest AND without manually hard coding the values in the code as they will change.
Below is 1 of the many codes I tried. This appears to be the most intuitive but I get an 'invalid procedure" error at Set my PivotTable...
'Sub PivotAnalysis()
'
Dim myPivotTable As Excel.PivotTable
Dim myPivotField As Excel.PivotField
Dim myPivotItem As Excel.PivotItem
[Code]....
I have a perfectly working pivot table and I would like to make some graphs based on the report filter. My report filter has 4 categories, with each more than 10 sublevels.
When I make one pivot graph/chart, this goes fine, the data is ok, and I am happy. But one I make a second, and thus adjust the report filter, the first graphs changes according to the filter. I dont want that to happen
Ultimately I would like a powerpoint presentation with multiple charts, based on one table, with different report filter filters. Updated ONLY on the values, not the filter.
I'm trying to create a table with drop down options for each cell (a different set of options for each column). Normally I'd use data validation, but I need to use Excel Services with this document, and that doesn't support data validation. I've seen mentions of using pivot tables to accomplish the same thing, but I can't find an example that works for my situation. I have eight or so column headers, and need a fairly large number of rows, all with the dropdown option. Is there a way to do this?
View 2 Replies View RelatedAny way to create a calculated field in an Excel 2010 pivot table that will find all the Transaction Types (Report Filter) with "transportation" in them and make the field Quantity 0 and leave all other quantities the same? I do not want the quantity of transportation added in twice and may not have the flexibility of adding a column to the raw data.
I used the formula below in a calculated field and it does not match the values using the added column to the data file.
=IF(ISERROR(SEARCH("*transportation*",'Transaction Type')),Quantity, 0)
I am trying to get the sum of Quantity field to equal the AdjQuantity field using a calculated Pivot field and not add a new column to the data.
I have a list of S/N with Pass/Fail result next to it. A specific S/N can appear several times in the list:
SN...Result
-------------
111...FAIL
111...FAIL
111...FAIL
111...PASS
222...PASS
333...FAIL
333...FAIL
When creating a pivot table of SN vs. Result (count) I get:
****|FAIL...PASS
-------------------
111..|...3.....1
222..|..........1
333..|...2
I want to get the FAIL count of SN in which PASS > 0 (First two rows)
BUT I can not figure out how I can filter based on the values of the pivot table itself (rather than the values of the original list). When I try to use 'Result' field as report filter, I can not get it as a Column label (and vice-versa). In this case I get:
I get:
****|PASS
------------
111 | ...1
222 | ...1
Desired:
.......|..FAIL..PASS
-------------------
111 |...3...1
222 |........1
Desired (alternative):
......|..FAIL
-------------
111 |...3
222 |...0
Instead of Excel creating a new sheet when I double click on the results of a pivot table, is it possible to just filter the results of the original source data's sheet?
Here is my situation, I have source data that needs to be updated after someone double clicks on the pivot table data. They won't be able to update the source data if it just creates a new sheet (since it's a copy).
I'm running Excel 2003.
I am looking at a way to create a dsitributable excel spreadsheet (.xlsx), which contains non-sensitive, yet restrictied organisational information segmented by regional department for NCSA, EMEA for APAC respectively.
By design, all data has been collected in a datatable on a password protected "data" sheet - and - presented on an "executive summary" sheet. T
The "executive summary" sheet contains a privottable with select "multiple options" to allow for aggregated dataviews on executive level. However, on a regional department level, the users must only see their own regions, hence the filtering mechanims on the pivottable should be restricted.
Currently, the restrictions on the pivot tables are made in VBA, using the following script. However, it still allows people to change the "multiple options" filter in the pivot. How can I restrcit this option
Sub RestrictPivotTable()
Dim pf As PivotField
With ActiveSheet.PivotTables(1)
.EnableWizard = False
.EnableDrilldown = True
.EnableFieldList = True
.EnableFieldDialog = False
.PivotCache.EnableRefresh = False
For Each pf In .PageFields
[code].....
As a sidenote; the above design requires that a spreadsheet is compiled for each region each month. Ideally, the ability of filtering, could be password restricted - or - filteren. So only one selection would be presented for the NCSA, EMEA and APAC respectively, while Executives could view across one-or-many regions? However, as Pivot tables are used by design, I cannot see how this could efficiently be achieved?
On a sheet called, "Details", I have a pivot table that has three fields in the column area, Calendar type, Description, and Dates. I want to filter the pivot table based on a label filter in the Dates column. The filter should be between two dates (in D4 and D5) that are entered on another sheet and passed to the Details sheet through formulas in cells D4 and D5.
I have attached the following code to a button on a different sheet.
The code successfully filters for the employee name (which is a report filter in the pivot table) which is in a named cell.
I am having trouble with passing the start and end dates to my pivot table filter. I do not get any errors, the filter is simply blank.
Private Sub CommandButton3_Click()
Sheets("Details").Select
Dim pt As PivotTable
Dim Employee As String
Dim SDate As String
Dim EDate As String
[Code]...
I am building an Excel file that will be used to track information and at the core of it all is a list of people from different offices where the number of people per office can change and/or a person leaves the company and is replaced by another. I'll simply:
Column A Column B
Office Employee
Hamilton Emp 1
Hamilton Emp 2
Hamilton Emp 3
Toronto Emp 4
Toronto Emp 5
Toronto Emp 6
Toronto Emp 7
Toronto Emp 8
Waterloo Emp 9
Waterloo Emp 10
This will be all on Worksheet 'Info'. I have a Worksheet for each Office and named them accordingly. On each worksheet I want to use Data Validation on a column, we will call it 'ChosenOne', set it as 'List' and have the Source pull all the employee names that belong to that office and use them as a selection
ex: Hamilton Worksheet, 'ChosenOne' would show Emp 1, Emp 2, and Emp 3 in the list.
If Emp 3 changed offices to Waterloo 6 months from now I would like to change A4 from Hamilton to Waterloo and the formula would not have to be changed and the next time someone selects 'ChosenOne' it would only show Emp 1 and Emp 2.
Of course this means on the Waterloo Worksheet, 'ChosenOne' would show Emp 3, Emp 9, Emp 10 now.
So basically I am trying to not specify a specific named range for each office and am hoping there is a way to poll information from a Table (or any other tool that can simplify this).
I would be ok with something like:
Column A Column B
Office Employee
Hamilton Emp 1, Emp2, Emp 3
Toronto Emp 4, Emp 5, Emp 6, Emp 7, Emp 8
Waterloo Emp 9, Emp 10
and just move Emp 3 from B2 to B4 but I don't know if a list can be created from multiple items in a single cell seperated by a , or ; or :.
I have made a pivot table and I dlike to identify with a macro the documents with net value over 1000. Then extract these values next to the respective sales documents in an are near the pivot table somewhere. The fields are called Document and Sum of Net value. Of course the pivot is very variable one time it has 3000 records and another 5000.
View 9 Replies View Relatedi am attaching a sheet here.
i have put data validation list in three columns
from data lsts i select unit type , then hinge type then code.... the problem is that as soon as i select code all the values (H W D ) in the next three cells should automatically change.
the values against each cabinet code are also provided in the same sheet.
Sr No.
Unit Type
Unit Type
Code
H
W
D
Qty
1
Base Unit
Double Hinged Door
B60
720
600
580
2
2
Base Unit
Single Hinged Door
B30R
720
300
580
4
I have a data set that I constantly run a pivot table. I have the pivot table run on a separate sheet each time. Since I run it every time I was wondering if there is a way to set up a pivot table to run automatically and run it on a separate sheet.
Lastly, if that is possible, if the data set changes and the pivot table runs automatically will the pivot table recalculate based on the new data.
I am trying to link data from a pivot table we have in excel to a separate excel sheet.
The pivot table contains an up to date list of our inventory, however, we want to take that data and put it in a cleaner looking excel that we can e-mail to customers and publish on our website. Going individually, through every product takes too much time to have an up to date stock every day. Its even difficult to manage if we want to update just once a week.
When I link the cells of the pivot table to the new excel sheet they are constantly changing values as people are constantly editing the filters of the pivot table to look up various things.
I need to extract data from a spreadsheet given to me by my client, the best way to describe what I want to do is "a reverse of a pivot table"
The source sheet is arranged as follows:
Column A: Employee name every 3rd row
Column B: Normal Time on row 2, time and a half on row 3, double time on
row 4, normal time on row 5, time and a half on row 6 etc etc
Column C to I inclusive: Number of hours worked (on that day)
Column J: Subtotal of the 7 days (columns C to I)
Column K to Column DZ: Repeats of Column C to J
Row 1: dates in columns C to DY (except for the weekly subtotals)
I have many spreadsheets like this that I would prefer to have the information in a simple list format with the fields: Name, Date, Rate
Class (Normal Time, Time and a Half etc), Hours. Is there a simple/quick way to extract this information into the above mentioned fields? Am i being stupid and missing a simple solution?
I'm looking to update a pivot table based on some info in a cell but I keep getting an error message.
View 7 Replies View RelatedI am trying to filter onto Date field in my pivot table with a start date and an end date with VBA (please find code below).
However, my code single makes all pivot items invisible.
Bascially, in cell B1, I have my start date i.e. 05/04/2013 and end date in cell C1. I would like to filter out only items within these dates.
VB:
Sub PTFilterTest()
Dim ptPvt As PivotTable
Dim ptFld As PivotField
Dim i As Long
Dim dtBegin As Date
Dim dtEnd As Date
[Code] .....
I'm trying to have a command button clear all filters on a pivot table (PivotTable1) and apply a new filter equal to a cell value (C4). If the cell value can't be found I want the filter to equal "No Meeting". I'm trying to recycle the code from another workbook I built a long time ago, I just can't get it to convert to this application.
Code:
Dim County As IntegerDim pvtTable As PivotTable
Dim pvtField As PivotField
Dim pvtItem As PivotItem
[Code]....
I have a list of names and a count column, So it counts how many times the names have appeared from my raw data. Simple.
Using excel 2003 what i would like to do is filter the pivot table so it only shows people with a >1 count.
Now in excel 2007 this is really easy and i can just apply a >1 filter. I can't work out what to do in excel 2003.
On a worksheet, I created:
- a list of data
- a pivottable based on these data
When moving this worksheet this worksheet to another workbook, the pivot table can't refresh anymore. This throws an error message "Reference is not valid". To work around this problem I need to adapt the datasource. The same occurs if the list and the pivot table are on separate sheet, with the added strange behaviour that, when data an PT are split, it is not possible to move both sheet together.
This would not be a big issue if my problem had to be solved manually. The real problem is that I need to move the sheets from a C# program.
Is there any vba codes that can show tab/sheet that is based on the filter selection.
For example:
Cell A1 have a data validation of Apple, orange and Mango
I have 3 tabs named Apple, orange and Mango.
So every time I select Apple on the main in page filter. Apple tab will show. and if orange then orange tab will show.
I want to write a VBA code, so I can apply dates criterias to my pivot table. Say, I have 1-Dec-2007 in "C2" and 10-Dec-2007 in "C3". Now I want my pivot table to show me the dates between those two dates and the data that goes along with it. I have written this code, but it keep debugging:
Sub FilterDates()
Application. ScreenUpdating = False
Sheets("PnL").Select
Sheets("PnL").PivotTables("PivotTable3").PivotFields("Date") _
.PivotItems("01/01/1950").Visible = True 'to always have 1 populated
I have a user that uses pivot tables and charts every month to do a report. He wants to copy his charts every month and then just change the month in the data for the pivot table, but not matter what he tries its tied to the previous month and then chart data range in the select data source properties is grayed out. how to get this to work?
View 3 Replies View RelatedI have a huge excel file. This file contains Projects, Project Manager, departments and sales for different quarters. Each department has sales and the quarter the sale was done. Now I want to create a pivot table where I can see the sales for each quarter for each project or each project manager. Attached file may elaborate the problem. ShaA1.xlsx
View 9 Replies View RelatedI've created a PivotTable using VBA that contains hundreds of PivotItems, which would look bad when a PivotChart is made.
I'd like to set the PivotTable to make visible only the first X items (let's say 10). How would I do this in VBA?The macro recorder gives me the name of the PivotItem, but this varies so I'd like to use an index:
VB:
ActiveSheet.PivotTables("PivotTable4").PivotFields("UWI").PivotItems("Item1").Visible = False
ActiveSheet.PivotTables("PivotTable4").PivotFields("UWI").PivotItems("Item2").Visible = False
I want my report title is more dynamic which is based on the pivot table's <Status Date> filter. It mean if I select the <Status Date> filter option as 6-23-2014. Then the report title will automatic update as "Statistic Report 6-23-2014" instead of I have to change the date each time I run the report.
View 1 Replies View Related