I have a table with job numbers in one column and sub tasks for each job in a seperate column. I want to control the filter in the jobs column with a data validation cell. The data validation cell has all the job numbers in it and when I select job number "XYZ" in the data validation cell all other jobs are filtered out of the table.
View 1 RepliesI found this code and am trying to use it to update the filter in my pivot table (sheet 6), based on the data validation selection in sheet 1, but when I make my selection on sheet 1, nothing happens.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim ws As Worksheet
Dim pt As PivotTable
Dim pi As PivotItem
Dim strField As String
strField = "Region"
[code]....
I'm trying to set up a macro to to run and control the AutoFilter in my Excel Spread Sheet. Essentially, all i want to be able to acheive is, instead of inputting the cryteria myself in the auto filter, i want the macro to select the cryteria from a specific cell.
Example...
Running the autofilter, normally you would select "equals or grater than" option and you would input a figure then click the "or" option then input "equals or less than" and a new figure and then click ok. This would sort the range; see the example macro...
Selection.AutoFilter Field:=10, Criteria1:=">=01/09/207", Operator:=xlOr _
, Criteria2:="<=31/09/2007"
ActiveCell.Offset(774, -1).Range("A1").Select
ActiveWindow.SmallScroll Down:=-15
End Sub
What i want to beable to do is to run a macro which will do the above but instead or requiring the user to input the range cryteria for the filter it would point to a cell to get the value from.
' test1 Macro
' Macro recorded 06/08/2007 by Nigel M Bailey
'
Selection.AutoFilter Field:=10, Criteria1:="> Cell A2", Operator:=xlOr _
, Criteria2:="< Cell A3"
ActiveCell.Offset(774, -1).Range("A1").Select
ActiveWindow.SmallScroll Down:=-15
End Sub
In doing this i can validate the selection field and just add a search button which then will be perfect!
For a = 11 To 14
b = 10
If Cells(a, b) = 3 Then
ActiveCell.Offset(0, 0).Range("A1").Select
ActiveCell.FormulaR1C1 = "=IF(RC[-2]>0,RC[-2],"""")"
ActiveCell.Offset(2, 0).Range("A1").Select
End If
Next a
question : if i want to start the looping from the cell i am standing at instead of the defined a=11 to 14 , how ?
or
question : if i want to start the looping controlled by the cell value of the present worksheet say the value of a1 is 19 , and b1 is 30 , then it becomes : for a= 19 to 30 ,how
I have two tabs in one spreadsheet and I want to have the results chosen in one tab to filter in the other tab. So based on my drop down box result chosen in the first tab, I want the data in the other tab automatically filter only the result that was chosen.
For example, if I have the word "apple" in the drop down then I want all my data in the second tab to filter by "apple" in column B.
Is this something that would be possible?
Ive got a cell on a worksheet, that is controlled by a Control combo box. Is there anyway to change the value of the cell, and therefore the combo box, by using a macro. I need the macro to activate when the workbook is exited.
View 3 Replies View RelatedI'm trying to figure a to enforce dual data validation on a single cell. That is, I need to restrict the user to entering only a decimal value, only if a particular other cell (say A2) is blank. To put it another way, if A2 is blank, the user can enter a decimal value, but if A2 is not blank, the user cannot enter anything. I can use Data Validation to enforce either the decimal restriction or the ISBLANK, but I'm not sure how to make them work together.
View 2 Replies View RelatedI'm building a workbook that has a tab for each department (sales, admin, tech, etc.) w/i a project. I also have an inputs and instructions tab where I have all of my lists and background info hidden.
Essentially, on each tab, the user will build a team for the project using drop down lists. The lists reference data on the inputs tab. This data includes a list of all of the titles in the company, as well as which department they belong to. I want the validation to be structured such that the sales tab drop downs only see sales titles, admin only sees admin titles, etc. I also need it to be dynamic in its drop down inclusions so that when I add/subtract titles, I don't have to reset the validation for new cell references. Below is an example of the what the reference data looks like.
Input Tab:
Col A --- Col B
Dept --- Title
Sales --- Rep
Sales --- Sr. Rep
Admin --- VP
Admin --- SVP
Sales --- Closer
Tech --- Analyst
Tech --- Developer
I have a cell with data validation that I would like to look at table and be dynamic rather than a manual selection. So when I add to the list the data validation will reconise there are more options.
View 7 Replies View RelatedI'm trying to create a table with drop down options for each cell (a different set of options for each column). Normally I'd use data validation, but I need to use Excel Services with this document, and that doesn't support data validation. I've seen mentions of using pivot tables to accomplish the same thing, but I can't find an example that works for my situation. I have eight or so column headers, and need a fairly large number of rows, all with the dropdown option. Is there a way to do this?
View 2 Replies View RelatedI have three lists and I want to summarize them in one table. I can do this by formula or using Data validation by position. Who is the best way? There is a difference between them?
View 3 Replies View RelatedSee the attached:
1/ Need to be able to populate a table with the following data (or as illustrated in ' Sheet 1'.
Company Name, Year, Manufacturing, Non-Manufacturing
This data will need to come from the lists for each of the variables as opposed to from the table, as this will be hidden from the user. Also, more company details will be added over time.
I have a list of S/N with Pass/Fail result next to it. A specific S/N can appear several times in the list:
SN...Result
-------------
111...FAIL
111...FAIL
111...FAIL
111...PASS
222...PASS
333...FAIL
333...FAIL
When creating a pivot table of SN vs. Result (count) I get:
****|FAIL...PASS
-------------------
111..|...3.....1
222..|..........1
333..|...2
I want to get the FAIL count of SN in which PASS > 0 (First two rows)
BUT I can not figure out how I can filter based on the values of the pivot table itself (rather than the values of the original list). When I try to use 'Result' field as report filter, I can not get it as a Column label (and vice-versa). In this case I get:
I get:
****|PASS
------------
111 | ...1
222 | ...1
Desired:
.......|..FAIL..PASS
-------------------
111 |...3...1
222 |........1
Desired (alternative):
......|..FAIL
-------------
111 |...3
222 |...0
Instead of Excel creating a new sheet when I double click on the results of a pivot table, is it possible to just filter the results of the original source data's sheet?
Here is my situation, I have source data that needs to be updated after someone double clicks on the pivot table data. They won't be able to update the source data if it just creates a new sheet (since it's a copy).
I'm running Excel 2003.
I am looking at a way to create a dsitributable excel spreadsheet (.xlsx), which contains non-sensitive, yet restrictied organisational information segmented by regional department for NCSA, EMEA for APAC respectively.
By design, all data has been collected in a datatable on a password protected "data" sheet - and - presented on an "executive summary" sheet. T
The "executive summary" sheet contains a privottable with select "multiple options" to allow for aggregated dataviews on executive level. However, on a regional department level, the users must only see their own regions, hence the filtering mechanims on the pivottable should be restricted.
Currently, the restrictions on the pivot tables are made in VBA, using the following script. However, it still allows people to change the "multiple options" filter in the pivot. How can I restrcit this option
Sub RestrictPivotTable()
Dim pf As PivotField
With ActiveSheet.PivotTables(1)
.EnableWizard = False
.EnableDrilldown = True
.EnableFieldList = True
.EnableFieldDialog = False
.PivotCache.EnableRefresh = False
For Each pf In .PageFields
[code].....
As a sidenote; the above design requires that a spreadsheet is compiled for each region each month. Ideally, the ability of filtering, could be password restricted - or - filteren. So only one selection would be presented for the NCSA, EMEA and APAC respectively, while Executives could view across one-or-many regions? However, as Pivot tables are used by design, I cannot see how this could efficiently be achieved?
I am building an Excel file that will be used to track information and at the core of it all is a list of people from different offices where the number of people per office can change and/or a person leaves the company and is replaced by another. I'll simply:
Column A Column B
Office Employee
Hamilton Emp 1
Hamilton Emp 2
Hamilton Emp 3
Toronto Emp 4
Toronto Emp 5
Toronto Emp 6
Toronto Emp 7
Toronto Emp 8
Waterloo Emp 9
Waterloo Emp 10
This will be all on Worksheet 'Info'. I have a Worksheet for each Office and named them accordingly. On each worksheet I want to use Data Validation on a column, we will call it 'ChosenOne', set it as 'List' and have the Source pull all the employee names that belong to that office and use them as a selection
ex: Hamilton Worksheet, 'ChosenOne' would show Emp 1, Emp 2, and Emp 3 in the list.
If Emp 3 changed offices to Waterloo 6 months from now I would like to change A4 from Hamilton to Waterloo and the formula would not have to be changed and the next time someone selects 'ChosenOne' it would only show Emp 1 and Emp 2.
Of course this means on the Waterloo Worksheet, 'ChosenOne' would show Emp 3, Emp 9, Emp 10 now.
So basically I am trying to not specify a specific named range for each office and am hoping there is a way to poll information from a Table (or any other tool that can simplify this).
I would be ok with something like:
Column A Column B
Office Employee
Hamilton Emp 1, Emp2, Emp 3
Toronto Emp 4, Emp 5, Emp 6, Emp 7, Emp 8
Waterloo Emp 9, Emp 10
and just move Emp 3 from B2 to B4 but I don't know if a list can be created from multiple items in a single cell seperated by a , or ; or :.
I have a table and I need it to filter on the basis of a value entered in a different cell - but i want it to show all rows greater than and equal to that specific value.
Sub Testmacro()
filtercriteria = Range("H3").Value
Sheets("Report 1").ListObjects("Table1").Range.AutoFilter _
Field:=4, Criteria1:=">=filtercriteria"
End Sub
My goal is for any of my team members to be able to use a macro to delete all of the unwanted text from a fairly large worksheet and only show their specific information. I created it for myself and posted a slimmed down version of it below. Instead of the macro deleting any rows that do not have BRANDON SCOTT in column D, I want a pop up box to enter your name, and then any rows that do not have your name in column D will be deleted. I’m sure it is something simple, but I have not been able to find another forum with this information.
Sub MyTeam2()
With Columns("D")
. AutoFilter field:=1, Criteria1:="<>BRANDON SCOTT*"
.Resize(Rows.Count - 1).Offset(1).EntireRow.Delete
.AutoFilter
End With
End Sub
i am attaching a sheet here.
i have put data validation list in three columns
from data lsts i select unit type , then hinge type then code.... the problem is that as soon as i select code all the values (H W D ) in the next three cells should automatically change.
the values against each cabinet code are also provided in the same sheet.
Sr No.
Unit Type
Unit Type
Code
H
W
D
Qty
1
Base Unit
Double Hinged Door
B60
720
600
580
2
2
Base Unit
Single Hinged Door
B30R
720
300
580
4
I have attached a sample data sheet which i am working on . ITs a comparitive matrix trable with Input validation between 0&2 . I also want the table to be dynamic .If i want to increase or reduce no. of rows and clumns i should do it some how . More details are mentioned in the attached file .
View 1 Replies View RelatedI have 3 sheets in my excel worksheet.
1. Org
2. DataSource
3. Pivots Table
My Pivot table will get the data from the DataSource sheet. I will like to have the filter of the Pivot Table from one of the cell in Org Sheet. How can I do that?
From what I understand there's no way to do this without using macros. I would perfer not to use macros, but I need my PivotTables to auto-refresh anyways and apparently that will require a macro, so oh well. I'm very new to macro coding so I can't seem to successful apply any of the previous threads about this to my sheet.
I just need my pivot table on sheet "Customer" to filter the customer field based on the value in cell C1. Also I need to make sure the sheet doesn't "freak out" if the value in C1 is either blank, or is a customer value which doesn't exist in the table. Preferably in this scenario it would display nothing on the pivot table, but I don't know if that's possible. I want the sheet/macro to allow an invalid filter value in C1 just so the sheet doesn't lock up until it is corrected.
I also need my workbook to auto-refresh all the pivot tables is that's easy to code in as well.
I try filter a pivot table based a cell.
[Code] .....
Attached File : FilterPT.xlsx
How can I filter a Pivot Table from a cell.
Ex : I have a pivot table with regions (MW ,SE,SW,NE) .How can I enter the region in a cell and change the pivot table based on my input
how to change this code to select the choice "NACID" from cell "D1" instead of being hardcoded?
Sub Pivot1()
ActiveSheet.PivotTables("PivotTable4").PivotFields("Group").CurrentPage = _
"NACID"
End Sub
I have attached a sheet that I am working on. I want cell G1 to be less than or equal to 165. That cell contains a formula. If the formula takes the number to over 165 the validation is allowing it.
View 2 Replies View RelatedOn a sheet called, "Details", I have a pivot table that has three fields in the column area, Calendar type, Description, and Dates. I want to filter the pivot table based on a label filter in the Dates column. The filter should be between two dates (in D4 and D5) that are entered on another sheet and passed to the Details sheet through formulas in cells D4 and D5.
I have attached the following code to a button on a different sheet.
The code successfully filters for the employee name (which is a report filter in the pivot table) which is in a named cell.
I am having trouble with passing the start and end dates to my pivot table filter. I do not get any errors, the filter is simply blank.
Private Sub CommandButton3_Click()
Sheets("Details").Select
Dim pt As PivotTable
Dim Employee As String
Dim SDate As String
Dim EDate As String
[Code]...
I have a spreadsheet where I am tracking several entries in a table that will keep growing. Three fields are Data Validation Drop Down Lists. The macro below works well to clear the two lists to the right when the first one is changed by the user.
[Code] .....
I want this to affect the rows below it in the table as they are added.
I have a worksheet ("VillageReport") that contains several pivot tables. All tables are from the same data source and all pivot tables have "Location" as the first column field. I would like for the tables on this sheet to automatically be filtered when I select a village name from a drop down menu in a cell on this worksheet (C1). So, for example, when I select "Tarzana" in C1, the location field of all pivot tables on this sheet will show only Tarzana (all others are deselected).
a Macro for this? (I have already set up the drop down menu in C1). I have found some examples online but can't seem to adjust the code to fit my workbook. I am not very familiar with VBA.
I am familiar how to perform the task of bringing in an access table into excel, then using a data validation filter to control the data set in Excel 2003.
How to replicate this procedure in Excel 2007?