Pivot Table In Place Of Data Validation?
Jun 5, 2014
I'm trying to create a table with drop down options for each cell (a different set of options for each column). Normally I'd use data validation, but I need to use Excel Services with this document, and that doesn't support data validation. I've seen mentions of using pivot tables to accomplish the same thing, but I can't find an example that works for my situation. I have eight or so column headers, and need a fairly large number of rows, all with the dropdown option. Is there a way to do this?
View 2 Replies
ADVERTISEMENT
Feb 14, 2013
I found this code and am trying to use it to update the filter in my pivot table (sheet 6), based on the data validation selection in sheet 1, but when I make my selection on sheet 1, nothing happens.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim ws As Worksheet
Dim pt As PivotTable
Dim pi As PivotItem
Dim strField As String
strField = "Region"
[code]....
View 3 Replies
View Related
Jul 20, 2012
I am trying to automate creation of pivot table, where the first three fields will go into the RowLabel field, and the rest of them will go into the values as "Sum of ____".
Is it possible? Because I could do it one by one; however, those fields are different every time (there are different number of those fields, and their values are also different).
View 1 Replies
View Related
Mar 19, 2013
On a worksheet, I created:
- a list of data
- a pivottable based on these data
When moving this worksheet this worksheet to another workbook, the pivot table can't refresh anymore. This throws an error message "Reference is not valid". To work around this problem I need to adapt the datasource. The same occurs if the list and the pivot table are on separate sheet, with the added strange behaviour that, when data an PT are split, it is not possible to move both sheet together.
This would not be a big issue if my problem had to be solved manually. The real problem is that I need to move the sheets from a C# program.
View 3 Replies
View Related
Jan 22, 2007
attached is a spreadsheet 6 people in my area use daily(ive copied and pasted the sheet in question to a new worksheet, as the file was too big). Ive been trying for about 3 days now to make a pivot table to summarise this data.
View 6 Replies
View Related
Mar 17, 2009
I have a RAW DATA work sheet that has data of electricity consumption for a given week but it is in a vrtical table.
I have many other work work sheets in the workbook that I require to look at the RAW data and the return the correct information in the specified cells
I need the store number that is in cell F1 of each sheet and the Date on each sheet that are on Row4 of each sheet to Look up and match the information in ROW1 for the store number and columnA for the dates.
then in columnB of RAW DATA I have time intervals of 30mins which need to match up with the time intervals on the sheets and display the readings from the RAW data on the sheets.
******** ******************** src="http://www.interq.or.jp/sun/puremis/...<CENTER><TABLE cellSpacing=0 cellPadding=0 align=center>Microsoft Excel - Energy Analysis WE15-03-09.xls___Running: 11.0 : OS = (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA2A3A4A5A6A7A8=ABCDEFGHIJKLMNO1Reading DateReading Time8912116617118519682296710191119125612571292209/03/200900:0012.5926.74929.69668.728.6487.526.5616.2312.6416.3818.08317.02719.569309/03/200900:3011.8467.211.49610.1245.8726.821.817.9811.3216.711.96214.65619.243409/03/200901:0010.7368.11211.19811.286.27.415.2330.3412.0416.269.5527.26429.02509/03/200901:3010.78767.612810.68510.40725.6966.814.888.936.8416.618.53448.72645.4432609/03/200902:0011.0727.235213.01310.3235.9288.814.757.875.9218.059.38247.09445.3136709/03/200902:3011.2996.819210.26210.1765.70410.414.758.135.0916.489.0566.88325.1984809/03/200903:0011.8116.18248.952411.3695.88.314.697.774.9916.87.20964.71046.2496RAW DATA [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
View 9 Replies
View Related
Oct 19, 2006
I have a macro that imputs data from an external database and puts it into a temporary worksheet. This data has 3 columns (ID, Date, Amount). I am then making another sheet which has X number of tables (one for each ID), with the years being the column headings, and months being the row headings. ie.
| ID X
| +------+------+------+--->
| | 1999 | 2000 | 2001 |
+------+------+------+------+--->
| Jan | $100 | $250 | $300 |
+------+------+------+------+--->
| Feb | $200 | $300 | $200 |
+------+------+------+------+--->
| Mar | $300 | $250 | $100 |
+------+------+------+------+--->
| Sum | $600 | $800 | $600 |
| +------+------+------+--->
| ID Y
| +------+------+------+--->
| | 1999 | 2000 | 2001 |
+------+------+------+------+--->
| Jan | $100 | $250 | $300 |
+------+------+------+------+--->
| Feb | $200 | $300 | $200 |
+------+------+------+------+--->
| Mar | $300 | $250 | $100 |
+------+------+------+------+--->
| Sum | $600 | $800 | $600 |
| +------+------+------+--->
Currently I have a few hidden fields for the DSUM Criteria. I start making the tables. And then filling in table based off of the month and year. Doing so I need 3 criteria:
>= First Day of the Month
<= Last Day of the Month
= ID #
The problem is it takes Excel too long to fill in the 3 criteria fields, calculate the result, copy the result, and place it into the correct place on the table. Is there another way to get this data into the correct tables faster? Instead of using DSUM?
View 8 Replies
View Related
Feb 22, 2007
I am after a macro to do the following, my visual basic skills are very limited (non existant):- Look at the date in cell A1 on Sheet 'Live Report' and err 'remember it' Copy a range of cells from A3 to A10 on 'Live Report' Go to sheet 'Monthly Summary' and find the date that had been remembered previously (this date will be in column A on 'Monthly Summary' which will probably be a mixture of values and formulas). After the date has been found paste special and transpose the 'values only' copied range from 'Live Report' (A3 to A10) in column B on 'Monthly Summary' next to the date that has been found in Column A.
View 2 Replies
View Related
Feb 1, 2010
I have enable Refresh on Open for my excel pivot table, but user need to click "Enable Automatic Refresh" , only solution i came across is to change the registry setting. Which i dont have access to edit registry(admin disable the access).
Alternate solution i try to use Access macro to automate the process and use Outputto save it as a excel file A. Then use excel file B to update pivot table from excel file A.(as excel A data is always latest)
The problem is i will get "....A file name already exist...do you want to overwrite.." prompt.
Which defeat the automate process.
Any other solution to enable the automatic refresh on open the excel workbook?
Or Access can overwrite the exist file or save it as another file name with timestamp ?
View 14 Replies
View Related
Mar 18, 2013
I manage a team that quote for business. They are targetted on number of quotes per month but then also wins per month, however a win may come a number of months after the original quote was generated.
They work off a spreadsheet where they log:
Quote date (And month)
Quote Value
... customer info etc
Win month (against orginal quote information)
Win value (against orginal quote information)
I started writing my pivot using the Quote month as the main reference point, IE Quote Month in the Row, and then put all the data in the central drop data section... However, there are two immediate problems with this:
They are targetted on quotes generated per month, some business won has come from last year, which they are lifting from the old spreadsheet and puttin in my new one... meaning that quotes they generated in Oct 2012 are now showing up as quotes for October this year.
If the wins span a number of months they are showing in January (if quoted in January) and not in March (when actually won)
Is there a better way of writing my pivot table??? There must be... ideally what I would like is half the table referencing the Quote date and half referencing the order date... but I don't know how to do this? I could probably do this with pages but I would like to show all on one sheet...
View 2 Replies
View Related
Jul 14, 2014
I was wondering if there is any way possible to link your pivot table filters to filter the data the same way in the table that it comes from? So if i had date as one of my headers and i filtered the date to a specfifc date, is there a way to also filter the date in the data source sheet?
View 2 Replies
View Related
Dec 14, 2006
i have a pivot table an extract of each data contained in this table.
[img]Count of NAMdate
SERVICENAM12-oct10-déc11-décGrand Total
Commercial-lauralaura11
Commercial-laura Totalgh11
custody-jonathanjonathan112
k11
custody-jonathan Totalgh1113
settlement-ludovicludovic11
settlement-ludovic Totalgh11
SPQC-elodieelodie112
SPQC-elodie Totalgh112
Grand Total1337
View 9 Replies
View Related
May 15, 2014
I got the attached dashboard example from a source online.
I was wondering how they linked their pivot chart with a drop down (data validation). This is the pivot chart on the bottom right that is labeled "Brick Styles".
Dashboard_Your_Scorecard_Complete_2010-1.xlsx‎
View 1 Replies
View Related
Aug 24, 2009
I'm building a workbook that has a tab for each department (sales, admin, tech, etc.) w/i a project. I also have an inputs and instructions tab where I have all of my lists and background info hidden.
Essentially, on each tab, the user will build a team for the project using drop down lists. The lists reference data on the inputs tab. This data includes a list of all of the titles in the company, as well as which department they belong to. I want the validation to be structured such that the sales tab drop downs only see sales titles, admin only sees admin titles, etc. I also need it to be dynamic in its drop down inclusions so that when I add/subtract titles, I don't have to reset the validation for new cell references. Below is an example of the what the reference data looks like.
Input Tab:
Col A --- Col B
Dept --- Title
Sales --- Rep
Sales --- Sr. Rep
Admin --- VP
Admin --- SVP
Sales --- Closer
Tech --- Analyst
Tech --- Developer
View 4 Replies
View Related
Jan 13, 2014
I have a cell with data validation that I would like to look at table and be dynamic rather than a manual selection. So when I add to the list the data validation will reconise there are more options.
View 7 Replies
View Related
Jan 4, 2010
I'm trying to write a macro that will create a pivot table, and am getting an Error code 1004: Cannot Open Pivot Table Source File "Sheetname". My code is below. I've tried to note what each section does, and it all seems to work well except for the Pivot Table creation.
View 14 Replies
View Related
Mar 14, 2013
I have a worksheet with two pivot tables, one of which is visible to the user. Ideally, the user should be able to change the "Row Label" field settings of the visible pivot table and then press an "update button" that then adds the same field to the second pivot table.
Ideally, the ordering of the fields should also be made similar between the two tables, though this is of less priority.
I imagine it would be something in the style of:
"If number of Pivot1 active row label fields = X then
Pivot 2.AddRowLabelField = Pivot1.RowLabelField(X)
end if"
View 1 Replies
View Related
Jan 4, 2014
I have three lists and I want to summarize them in one table. I can do this by formula or using Data validation by position. Who is the best way? There is a difference between them?
View 3 Replies
View Related
Nov 17, 2006
See the attached:
1/ Need to be able to populate a table with the following data (or as illustrated in ' Sheet 1'.
Company Name, Year, Manufacturing, Non-Manufacturing
This data will need to come from the lists for each of the variables as opposed to from the table, as this will be hidden from the user. Also, more company details will be added over time.
View 4 Replies
View Related
Jan 11, 2013
I am building an Excel file that will be used to track information and at the core of it all is a list of people from different offices where the number of people per office can change and/or a person leaves the company and is replaced by another. I'll simply:
Column A Column B
Office Employee
Hamilton Emp 1
Hamilton Emp 2
Hamilton Emp 3
Toronto Emp 4
Toronto Emp 5
Toronto Emp 6
Toronto Emp 7
Toronto Emp 8
Waterloo Emp 9
Waterloo Emp 10
This will be all on Worksheet 'Info'. I have a Worksheet for each Office and named them accordingly. On each worksheet I want to use Data Validation on a column, we will call it 'ChosenOne', set it as 'List' and have the Source pull all the employee names that belong to that office and use them as a selection
ex: Hamilton Worksheet, 'ChosenOne' would show Emp 1, Emp 2, and Emp 3 in the list.
If Emp 3 changed offices to Waterloo 6 months from now I would like to change A4 from Hamilton to Waterloo and the formula would not have to be changed and the next time someone selects 'ChosenOne' it would only show Emp 1 and Emp 2.
Of course this means on the Waterloo Worksheet, 'ChosenOne' would show Emp 3, Emp 9, Emp 10 now.
So basically I am trying to not specify a specific named range for each office and am hoping there is a way to poll information from a Table (or any other tool that can simplify this).
I would be ok with something like:
Column A Column B
Office Employee
Hamilton Emp 1, Emp2, Emp 3
Toronto Emp 4, Emp 5, Emp 6, Emp 7, Emp 8
Waterloo Emp 9, Emp 10
and just move Emp 3 from B2 to B4 but I don't know if a list can be created from multiple items in a single cell seperated by a , or ; or :.
View 4 Replies
View Related
Jan 26, 2012
I have a table with job numbers in one column and sub tasks for each job in a seperate column. I want to control the filter in the jobs column with a data validation cell. The data validation cell has all the job numbers in it and when I select job number "XYZ" in the data validation cell all other jobs are filtered out of the table.
View 1 Replies
View Related
Apr 29, 2006
I have data that develops 3 to 4 pivot table each day. I would like to know if there is a way to change the date on one of the pivot table and have the other pivot tables date change to match with the first pivot table. At this time I am going to all 3 or 4 pivot table to select the correct date. The date is in the page position of the pivot table. I have attached a small sample of the data and the pivot tables.
View 2 Replies
View Related
Jan 11, 2013
I have created a pivot table that is connected to an input sheet with data. The input sheet retrieves data automatically from a external source through an add-in to Excel. When updating data the fields expands, but only for the items which have been changed. I want the table to be updated automatically, but not the fields expand automatically. Is there any pivot options to prevent this problem?
It should be mentioned that the pivot table is not directly connected to the input sheet (which is updated from the external source), but from a "help-sheet" reflecting the input sheet with some additional columns. I use conditional formatting and name range in the pivot.
View 1 Replies
View Related
Apr 23, 2013
i am attaching a sheet here.
i have put data validation list in three columns
from data lsts i select unit type , then hinge type then code.... the problem is that as soon as i select code all the values (H W D ) in the next three cells should automatically change.
the values against each cabinet code are also provided in the same sheet.
Sr No.
Unit Type
Unit Type
Code
H
W
D
Qty
1
Base Unit
Double Hinged Door
B60
720
600
580
2
2
Base Unit
Single Hinged Door
B30R
720
300
580
4
View 2 Replies
View Related
Jul 8, 2013
I have attached a sample data sheet which i am working on . ITs a comparitive matrix trable with Input validation between 0&2 . I also want the table to be dynamic .If i want to increase or reduce no. of rows and clumns i should do it some how . More details are mentioned in the attached file .
View 1 Replies
View Related
Jun 18, 2014
vba in excel 2013 pivot table that updates from an online CRM rows are a to h and it can be any number of rows. What I am trying to do is track progress. In column f values indicate probability for success 10 25 45 90, which can go up or down. The pivot table is refreshed to get the latest values from CRM. the update is handled by a connection to the crm not in the vba.
So far I been researching methods to conditionally format values that went up, down or remained the same since the last refresh with up down and across arrows. I have managed to piece together what I think should work but alas it is not. So I have come to you internet.
My code first clears any formatting and goes down the column avoiding null or empty cells, comparing the values in column f to values in column j.
I have 3 conditions greater than, less than or equal to, and would like add an icon for each based on the result of the comparison.
Finally when it finishes the column the code copies the current values in the pivot table column f to column j outside the pivot table which i hope to be able to hide once the cf works. The code is below
[Code] .....
View 1 Replies
View Related
Aug 19, 2012
is there any way to NOT Displaying Items with No Data when filtering data in my pivot table?
For instance, I have 2 report filters: Category and Subcategory, when I select a category in the first filter I want to see only the options of subcategories with data in the second filter, I mean display only the subcategories of the Category previously filter.
Same scenario I have with a report with Directors and Organizations, when I filter one Director it would be nice to see only the organizations of this director and not all options on the data.
View 1 Replies
View Related
Oct 29, 2008
I have a excel sheet with following 4 columns
Division Name:
Location Name:
Transformer capacity:
Transformer earth resistance:
Now how can I get answer of following queries in Pivot table. (Excel 2007)
1. % of a particular capacity of transformers in a division say % of 400 capacity transformers in all divisions.
2. % number of transformers having Transformer earth resistance value above a particular value in all divisions. Say % of Transformers having Transformer earth resistance above 2.6 in each division.
View 9 Replies
View Related
May 27, 2007
I'm using Excel for bookkeeping and balancing a budget. I've created one sheet for all my raw data and the other is to summarize the data using a pivot table. On the raw data sheet I have labeled my columns for the pivot table. I was hoping that in the pivot table I can select a year and have all the months for that year and data of that year be available, but not other years. I was also trying to have only the month selected of a year selected and that data be available. I also wanted to show an accounting of money spent by item.
Instead, I have a pivot table that is confusing and very unattractive. The example of this will show my limited knowledge in pivot tables. I'm hoping some of you more affluent "guru" members may be able to help me get something usable and presentable.
I tried creating a dynamic named range for the pivot table "BookKeeping" and a dynamic named range for the money out and money in "Accounting", but I'm not sure if I did that right. I did this because more columns will be added over time. This is the reason I'm asking the above two paragraphs.
Should I be using filters some how?
The Summary Sheet also has the balance of available funds that I'm somehow looking to include in this pivot table. Can the pivot table keep a running balance?
View 9 Replies
View Related
Aug 1, 2014
I have a spreadsheet where I am tracking several entries in a table that will keep growing. Three fields are Data Validation Drop Down Lists. The macro below works well to clear the two lists to the right when the first one is changed by the user.
[Code] .....
I want this to affect the rows below it in the table as they are added.
View 2 Replies
View Related
