I need to count the unique items in a range that don't contain the string "option". I would like not to use VBA for that but I can't make it work with a simple formula.
For now, I have :
[Code] ......
That doesn't count the cell with the content "option" and count correctly the other unique items. However I need to ignore any cell that contains the string "option" (with wildcards).
I have a worksheet. I would like to count unique number of "Trans" in column A only if value of cells in column B "Type" equals "Return". In example below, I would want to see the value "3" as total.
Trans Type
1 Return
2 Return
2 Return
3 Exch
4 Exch
5 Return
5 Return
I use the following formula to count unique values within a group for a pivot:
=IF(SUMPRODUCT(($CO$2:$CO55681=CO55681)*($E$2:$E55681=E55681))>1,0,1)
When I paste values over the formula it takes around 1 hours to do the 70k cells which is excessive. I want to know if there is a way to speed it up?
I tried doing an =cell and then paste special that and it works really fast but when I delete the actual formula's again the whole sheet locks up.
How can I FILTER a range and display the unique items, one below the other, WITHOUT blank cells - with only a FORMULA. What I came up with is shown in the attached WB. I would like to present the countries like in C11:C15.
View 5 Replies View RelatedData: four variables A,B,C and D from A2:D6000
I want a count of unique D values
when A=xxx
and B=yyy
and C=zzz
I have named the A,B,C,D ranges as RangeA, RangeB, RangeC, RangeD
I have used the function
=SUM((RangeA="xxx")*
(RangeB="yyy")*
(RangeC="zzz")*
But what do I use to count-unique values of variable D ?
=SUM(IF(FREQUENCY(RangeD,RangeD)>0,1)) doesn't work.
=SUM(1/COUNTIF(RangeD,RangeD&"")) doesn't work either
They don't work because D can occur during different combinations of A,B and C. In other words, the D value of 'Smith' can, and does, occur when A is 1,2 or 3 and additionally when B is Pass, Fail, Withdrawn.
They "don't work" because I can use filters on A, B, C and D to see what the correct answer should be .. and the function doesn't return the correct answer.
I hope I've explained this ok - I've been searching on several excel-help websites for 2 days now and one of the days my client is going to want some results.
If I have multiple entries with different but repeatable text values in one column - how do I count all unique ones ? Is there a function or does it have to be a pivot table of sth ?
View 14 Replies View RelatedI am trying to find a formula that will count the number of unique entries there. I have tried the solutions posted on various websites to no avail (most recently:
Code:
=SUM(IF(FREQUENCY(MATCH(A1:A10,A1:A10,0),MATCH(A1:A10,A1:A10,0))>0,1))
).
The answer should be 4,457.
Ticket Number
T20110819.0527
T20110830.0339
T20110901.0060
T20110901.0060
T20110907.0042
T20110907.0042
T20110908.0186
T20110908.0186
T20110908.0186
T20110908.0186
[code].....
I have a single cell comprising A|B|C| A. How do i get the unique values? Also, any chance to count the variables.
View 2 Replies View RelatedI'm using Excel 2003 and am trying to filter a list of values. The list has duplicate values in it. When I use Filter>Advanced Filter and select "Unique records only" the filter only eliminates some of the duplicates. If there are 4 values of 100, it may filter 2 of them or none at all. Ultimately I'm trying to end up with a list of values with no repeats.
[Excel 2007]. I'm trying to get the list of unique values from a Filter on a column in VBA.
I've given the column a Range Name
Code:
Dim rClient As Range
Set rClient = ws.Range("CLIENT_NAME")
Dim aClients() As Variant
aClients = rClient.???
There's nothing in the range method dropdown that obviously relates to the Filter on the range.
Is it something to do with the Table method?
In an excel i have 3 columns they it contains around 12000 records
Group FA Title
A S1 bbbb
A M1 xxxx
A M2 eeeee
A S1 ffffff
A S1 pppp
A M3 aaaaa
A M2 ooooo
A M2 qqqq
A M1 ttttt
Here i need to get the unique FA, so i filter the column FA, my question is, After filter with FA column ,is there any way to store these unique FA(ie S1,M1,M2,M3) into an array using vba?
I have a list of Window sizes and types in Range B4:B:43. The descriptions repeat because in Column K I am listing a location for each window in a house.
Example:
B K
3050 SH 1/1 Dining Room
3050 SH 1/1 Kitchen
2030 Fixed Foyer
2030 Fixed Living Room
In the Same sheet Starting on B:45 I want a list of only Unique Window Types:
B:45 and Down:
3050 SH 1/1
2030 Fixed
I'd like this to automatically appear after populating the first list. I used an advanced filter the first time and it worked, but it is not reliable and sometimes returns duplicate values or give me an error message. Plus once again having it happen automatically as the list will change each time I access the sheet would be great.
I need a Macro (not formula) which compares the comma separated values present in Column "I" with individual values present in Column "D" and generate the count of unique values in Column "J".
The sample sheet has been attached for reference.
I'm running into an issue trying to calculate unique values in a Data column based on a few variables in other columns.
My current formula in Summary tab D4:D19 is
{=SUM(IF(FREQUENCY(IF(Data!$I$3:$I$66<$E$1,IF(Data!$A$3:$A$66=$H$1,
IF(Data!$C$3:$C$66=A4,ROW(Data!$I$3:$I$66)))),ROW(Data!$I$3:$I$66)),1))
+
SUM(IF(FREQUENCY(IF(Data!$I$3:$I$66<$E$1,IF(Data!$A$3:$A$66=$I$1,
IF(Data!$C$3:$C$66=A4,ROW(Data!$I$3:$I$66)))),ROW(Data!$I$3:$I$66)),1))}
This is currently counting the number of times a date value (data column I) appears for that name (A4:A19) in the data when meeting all of the conditions. I need it to instead count the number of times a unique date appears for that name with the additional conditions met (which all appear to work fine).
The results in the pink highlighted cells (Summary column D) should be:
Names starting with A - 3
All others - 2
I've left some other columns in the data with X's so that I can easily convert this back to my working spreadsheet.
I'm working with a data set (attached) that tracks financials at both the job and item level (in my customer's data - a unique job can be made up of a single or multiple items).
I've successfully built a formula (in column C of the attached) that counts the total number of items and their associated $ values that were invoiced in a given month based on my customer's requested item-type categorizations (i.e. "Exact Match", "Similar", "Inferred", "Cost-Plus").
The problem I'm running into is building a formula that counts the first unique instance of the Job ID associated with those items. For example - in cell C33 on the attached - The total number of items invoiced in June that were "Exact Match" was 10. These items were spread across 9 unique jobs - and that's where I'm struggling - to build a formula that only counts the first unique instance of the corresponding Job ID in Column C.
The formula I'm having trouble with is located in Cell D12 on the "Dashboard" tab of the attached.
The formula as I have it is returning a result of 8 - because it's summing the "1"'s in Column I on my "Invoice Data" tab - however it should read 9 (Filter Column Q on the "Invoice Data" tab to "June", Filter Column AQ on the "Invoice Data" tab to "Exact Match", and then sum the unique job IDs in Column C).
Excel_Forum_Example_Dataset_7.24.14.xlsx
So here is my dilemma and I haven't been able to find anything to exacly help me out:
I have a large (100k+ records) sheet of sales invoice details.
I need to add a total item line per invoice number to each record ....
Card Number
XXXX5512
XXXX5512
XXXX4211
XXXX4510
XXXX6134
XXXX9035
XXXX6002
XXXX8653
XXXX7826
XXXX8819
XXXX8315
XXXX0274
I'm looking for a formula to generate the number of unique card numbers are in the column...I'm using this daily, simply pasting the new data in so if I want to keep it as automated as possible.
I want to count data that corresponds to 4 criteria for data located in Columns B, C, D and E. However, I only want to count only the unique values in Column A. How do I improve on this formula?
=SUMPRODUCT(($E$2:$E$5=J$2)*($D$2:$D$5=I$2)*($C$2:$C$5=H$2)*($B$2:$B$5=G$2))
See data below
Is there a formula that can be used to count all unique values in a specified column.
Example:
Col. A
123
123
Test
ABC
ABC
ABC
Result: 3 (since there are 3 unique values in col. a)
I have an array that I'm using - and it works perfectly: =SUM(If((FREQUENCY(If(LEN(B10:B100)>0,MATCH(B10:B100,B10:B100,0),""),If(LEN(B10:B100)>0,MATCH(B10:B100,B10:B100,0),""))>0),1))
Now, what I would like to do, is see how many of these unique numbers relate to another number in column D
See attachment.
I have a spreadsheet that holds customer information. What I want to do is find how many customers there were last month. I have a cell (C1) which has last month displayed as 2009/05. A1 holds the customer ID and B1 holds the date they used us. Each customer may has used us many times and I'm having a nightmare trying to solve this.
View 8 Replies View RelatedHaving a large spreadsheet with Columns A to F filled with data.
I'm trying to create a formula that's count the unique value "Order no." (Coloumn F) but only the ones between certain Departments Column(H) a certain "Error type" in Column(J).
I want to count the unique values between 2 dates. He only needs to count the values that match 2 criteria. I want to know how many unique orders were place between 01/10/2012 and 30/09/2013.
In my Data sheet:
Colomn X: Customer name
Colomn D: Status
Colomn AH: Date of order (Day/Month/Year)
I want to count the unique values in Colomn O: Ordernumbers
This is what I already have:
=SUM(--(FREQUENCY(IF(Data!$X:$X=$A4;IF(Data!$D:$D="BOOKED";Data!$O:$O));Data!$O:$O)>0))
This formula is working. He counts the unique values in colomn O that meet the 2 criteria (Status = "BOOKED"; Customer = A4).
But I don't know how the add the date range in this formula. I want him to take only the values that are between 01/10/2012 and 30/09/2013.
I have a large list of data and need to filter unique values of 1 column with a criteria.
For example:
A B
Car 1
Bike 1
Car 2
Car 2
Bike 3
Bike 3
Bike 4
Car 4
I want to filter out only the lines whereby the column A & B is the same comment/value.
Other words: both column A & B have to be unique values.
Based on the list above this means that the list should look like this:
A B
Car 1
Bike 1
Car 2
Bike 3
Bike 4
Car 4
Good Morning Peps (Oh thats for users in Western Europe, got to get this right!)
I have these 12 columns (Well there is 12 Columns but this forum's HTML is not showing the last two lol, would much easier if Office Web Components was able to run on Firefox): ...
Can DCOUNTA be used to only count unique values?
If the above is not possible how would I do the following:
Criteria
Column H = text1 AND Column B date is between date1 & date2
Count unique values in column C
formula that will return the number of "x"s or "o"s within the same cell.
The cell has values that are formatted in multiple ways for example: PXX--XXP, --XO, OXX--.
I want the formula to return 4 if the cells has PXX--XXP or 3 if the cells has --OXX etc.
I need to count the number of values entered into a single cell seperated by commas for record keepin purposes. I would prefer not to use a macro since I am not an expert, but will if i must. Here is an example of what i am talking about:
User A will enter "109,108,107,106" into a cell in Column A
At the bottom of column A the Total will read 4.
Now User B enters "110,111,112,113" into the next cell in Column A
At the bottom of column A the Total will read 8.
I am using Excel 2007, and I'm stuck with this problem.
View 4 Replies View RelatedI need to count the number of unique names from a column of filtered text. On the attached example D5 is where I need the value, the current array I have does not work when the filter is applied by changing the product in drop box. I need to have a count of the unique account names from column A.
View 3 Replies View Related
