formula that will return the number of "x"s or "o"s within the same cell.
The cell has values that are formatted in multiple ways for example: PXX--XXP, --XO, OXX--.
I want the formula to return 4 if the cells has PXX--XXP or 3 if the cells has --OXX etc.
If I have, in one cell (call it D1):
EH,DR,HU
and in a lookup table on another sheet:
A B
1 ED T
2 EH F
3 DR G
4 HU H
5 SE E
6 YU E
I need to be able to lookup the values in D1 on the table and return the values in column B to a single cell (say E1), also comma separated...
eg...
F,G,H
I have a spreadsheet which has a column that contains route numbers (for collection of goods). Some addresses have 2 or 3 route numbers within the same cell i.e.
3
3 20
3 20 15
I would like to know the formula for counting the number of cells that contain each route number i.e. from above 3 = 3, 20 = 2, 15 = 1
I need to count the number of values entered into a single cell seperated by commas for record keepin purposes. I would prefer not to use a macro since I am not an expert, but will if i must. Here is an example of what i am talking about:
User A will enter "109,108,107,106" into a cell in Column A
At the bottom of column A the Total will read 4.
Now User B enters "110,111,112,113" into the next cell in Column A
At the bottom of column A the Total will read 8.
Is there any method to speed up a for each loop to count text in a cell with multiple criterias in a single column. This is on example:
Code:
For each rr in r
If rr = "a" And rr.Font.Strikethrough = False Or rr = "B" _
And rr.Font.Strikethrough = False Then
a = a + 1
end if
next
I am trying to read a value in cell A1 and make say cell B1 read the same. The data in cell A1 is a real time percentage value that gets updated every lets say 10 secs. Every time the data is updated the new value goes into the next cell A2, A3, A4..... and so on. Every time it gets updated (i.e into A1,A2,A3,A4.....and so on), I want to read the new value each time in B1.
View 9 Replies View RelatedI'm having a problem with a spreadsheet in Excel. I have in column terras, codti problem and several cells that are repeated. I'm stating that terra appear only once, the information in column each issue should appear in different columns with the sum of how often they appear and codti according to terra.
In excel is best illustrated what I mean!
In total, 5267 lines and need to do this with all. You can do this in excel?
I'm trying to validate the data entered into a series of cells each cell can contain a different set of data but the value N/A is also permitted. For example:
Cell A1 could contain a date from 2013-01-01 thru 2013-12-01 but the value N/A is also valid
Cell A2 could contain a decimal from 0.01 thru 302502.23 but the value N/A is also valid
Cell A3 could contain an integer from 3 thru to 9000 but the value N/A is also valid
When the acceptable values are entered then I want to be able to carry on otherwise I want to pop up with an error.
I have an assigned value of 10 to each checkbox that is checked. If the checkbox is selected I want to automatically sum the totals in a cell on my active sheet. Checkboxes are activeX placed directly on a worksheet. I currently have a work around but considering the number of checkboxes I have, coding is going to be a nightmare as I would have to code each one separately. Right now I am summing each box on another sheet and linking the summed total back to active sheet.
[Code] ....
I would like to do all check boxes with one code and sum the total in the active sheet in cell "I7". The set of checkboxes is 1 to 26.
I am looking to produce a formula that shows if a number is "found" or "not
found".
I have list of over 1000 numbers in one column (1 number per row) . I am
trying to identify if those values are present in a range of numbers from
another worksheet(also in a single column). My challenge is that the range of
numbers that I am looking in has multiple values, separated by commas in a
single cell. Looks like it was from an Access data dump.
I am building a marketing dashboard that shows the effectiveness of two campaigns based on where the campaign has been deployed (website, email, facebook, twitter, google+ etc.). In each campaign I have a checklist (using developer ribbon) with these different dimensions.
I want a formula that checks the checklist, identifies all the boxes that are unticked and returns them in a single cell. The cell would read:
To increase traffic to the Shampoo campaign (Campaign A), expose it to Google+ and Facebook as these channels generated 578 and 2009 visitors respectively for the Makeup campaign (Campaign B).
I already have it working for returning a single value with the following formula but need it to return multiple values.
=IFERROR("To increase traffic to the "&B4&" campaign, expose it to "&INDEX(L4:L10,MATCH(K5,M4:M10,FALSE))&" "&"as"&" "&"this channel generated "&VLOOKUP(INDEX(L4:L10,MATCH(K5,M4:M10,FALSE)),L26:N31,2,FALSE)&" visitors for the "&D4&" campaign","")
I am building a marketing dashboard that shows the effectiveness of two campaigns based on where the campaign has been deployed (website, email, facebook, twitter, google+ etc.). In each campaign I have a checklist (using developer ribbon) with these different dimensions.
I want a formula that checks the checklist, identifies all the boxes that are unticked and returns them in a single cell. The cell would read:
To increase traffic to the Shampoo campaign (Campaign A), expose it to Google+ and Facebook as these channels generated 578 and 2009 visitors respectively for the Makeup campaign (Campaign B).
I already have it working for returning a single value with the following formula but need it to return multiple values.
=IFERROR("To increase traffic to the "&B4&" campaign, expose it to "&INDEX(L4:L10,
MATCH(K5,M4:M10,FALSE))&" "&"as"&" "&"this channel generated "&VLOOKUP
(INDEX(L4:L10,MATCH(K5,M4:M10,FALSE)),L26:N31,2,FALSE)&" visitors for the "&D4&" campaign","")
i would like the code that allows me to copy enything I typing in column a sheet1 to column a in sheet2
View 8 Replies View RelatedI have the following data on a spreadsheet created by a formula:
A1: 1.1234
A2. 2.234
A3: 3.34
I have the data formatted to only have two decimal places so it looks like this:
A1: 1.12
A2: 2.23
A3: 3.34
I'm using the following formula in cell B1 to display the values of those cells in a single cell in order A1,A2,A3:
=A1 & "," & A2 & "," & A3
However when the values of A1, A2 and A3 appear in the in cell B1 they appear as: 1.1234,2.234,3.34
Is there a way I can edit the formula or format something so the values in B1 appear as with only two decimal places? i.e 1.12,2.23,3.34
I am trying to count the number of rows that have values greater than 10/01/2008 in either of two fields. I tried following formula but instead of giving total number of rows, it returns a random date.
View 2 Replies View RelatedI am trying to come up with the most efficient way to copy data to multiple sheets within the same Excel workbook. The original data exists within one column on a summary sheet (could have up to 500 individual entries). I want to copy each individual entry to a unique sheet (that already exists), but in the exact same cell location within each sheet. I would only want to copy the original data value and not any formatting. Is there an efficient way to do this?
In my example spreadsheet, the original data is on the SUMMARY sheet. Sheets A through J would be the target sheets, with cell B2 as the target location for each of those sheets. My example shows the result of a manual copy paste value process, but I am hoping to automate that.
I am trying to look & match key values from 2 areas of one table with two areas of another table; in turn, it'd return one value based on the lookup table...
Attached worksheet : Test booklet.xlsx
I am trying to count the number of commas in each line of my Excel file. So I first decided to count the total number of rows and then count the number of commas in each row. I wrote this code. But I keep getting an error saying Next without for.
Sub Give_The_Last_Row()
Selection.SpecialCells(xlCellTypeLastCell).Select
LastRow = ActiveCell.Row
[Code]....
Have numerous values in Col A. Col E extracts a list of unique values from that column.
In Col C, the Col A value has had characters added to it.
Need a formula to count the number of unique values from Col C which contain the same prefix from Col A, and place the result in Col F.
A sample workdook is attached with the desired result shown and highlighted in yellow.
I'm trying to figure out how to count by two criteria, only one of the criteria has a value among multiple values in a cell and the other is a range. I tried to use sum but it doesn't count the value and count doesn't recognize the range. I attached the file so you can see what we're trying to do.
View 4 Replies View RelatedIn what would be Cell E2 I want to post the Total posted set Assuming that the Order Numbers and the OP Numbers are the Same, but only if there is a value in the allowed set, So I'd expect E2 in the case below to read 1.83,
Order No OP Posted Set Allowed Set
30761157 00100.731.500
3076115700100.500.000
3076115700100.600.000
3076461000100.000.000
3076461000101.050.500
3076524400100.000.000
3076524400100.550.500
3076639600100.000.000
3076639600101.180.500
3076810900100.000.000
3076862900100.000.000
3076862900100.000.000
3076862900100.000.000
I need to count the unique items in a range that don't contain the string "option". I would like not to use VBA for that but I can't make it work with a simple formula.
For now, I have :
[Code] ......
That doesn't count the cell with the content "option" and count correctly the other unique items. However I need to ignore any cell that contains the string "option" (with wildcards).
I have a text file containing internet explorer browser history. The file has data in the following format (in Excel all data is in 1 column): ...
View 9 Replies View Relatedi am looking some formula to make sequence number with criteria;
1) if in cell B2 contains only single/one data ----the result is mark "-"
2) if in cell B2 contains several data (not single)----the result is auto numbering with adding mark "." (dot) and start from 1.,2.,3.,4,etc........
for the detail,
condition 1 (multiple data in col.B)
number
name
1.
john
2.
mike
3.
sisca
etc...
condition 2 (single data in col.B)
number
name
count occurence of name Vijay in single cell b4. excel formula.
Vijay is good, Vijay lives in Delhi. My another friend with same name Vijay….. Vijay joined exl in 2008. Vijay has one sister named Vijaya.
I know something very similar was posted before, but unfortunately, it wasn't what I was looking for. I have a Worksheet tracking several associates and the department they have done work in. (Our associates are contractors for other departments). I need to have a final worksheet that allows me to pull up a name, and display every dept they worked with in the past week.
View 9 Replies View RelatedI am trying to come up with a simple formula to count a single cell if it contains either a 2 or 3.
The cell can contain numbers ranging from 0-8.
Even better would be if I could some how evaluate single cells based on the contents and then count the number of cells where the criteria for contents is true. The problem is the criteria differs from cell to cell (i.e. D2 could = 2 or 3, but E2 needs to be counted only if it contains a 4 or 5).
I know COUNTIFS only evaluate a range but it would be perfect if I could somehow get it to work for single cells. COUNTIFS(D2,2,D2,3,E2,3,E2,4,F2,2)
Attached is a sample workbook, but essentially what I'm looking to do is automate the process of searching through a data set where the value of interest (in this case, names) often has multiple entries, with different values attached to each instance.
I would like to be able to get a list of all values in a given column that match a specific name in another column.
Currently I'm using a basic INDEX/MATCH search just to see whether the data exists at all, but that's only half of what I have to do here, and I'm totally stumped on how to get a comprehensive list of all matches.
For reference, if you look at the sample, what I need is a list of all values in the "CPT" column that match the name searched for in the first column.
The actual data set size is at most 3-400 entries, if that makes a difference in how to approach this.
CPT Sample Book.xlsx
I am trying to find a formula to count rows that meet multiple criteria, but one of the criteria can be multiple values. I have a list of people with a list of clients that they are responsible for. Each person is responsible for 10-20 clients. Every day I run a report that shows the project worksheets submitted for each client and if money has been awarded or not.
I'm wondering if there is a way to count, for each person, the number of project worksheets that show "awarded" in column K. That would mean that I would have to look for, for each person, any of their multiple clients in column B and "awarded" in column K.
I am trying to put the formula in D2:D9, as I use A2:D9 for a chart. O1:P79 contain the names of the people and the applicants that they are responsible for. A17:D158 contains the list of project worksheets (updated daily). I used =SUMPRODUCT(COUNTIF(B17:B999,P1:P14)) to count the actual number of project worksheets for each person, but I can't figure out a way to modify that to add in the "awarded" criteria also.
I have a worksheet entitled 'Data'. In this worksheet there is a table consisting of 4 columns plus relevant data:
TABLE 1:
Project
Benefit Type
Delivered or Enabled
Benefit
PJ1
Financial
Delivered
Saving of $4M over 24 months.
[code]....
I have been trying to create a formula that will enable me to pull data from the 'benefit' column(column D) so that the cell contents populate in a single cell in a table in a different worksheet.
TABLE 2:
Financial - Delivered
Financial - Enabled
Tech - Delivered
Tech - Enabled
Green - Delivered
Green - Enabled
[code]....
So, as an example, I am hoping that a formula can be created which pulls the text from relevant cells in column D when criteria from columns A, B and C are met e.g. Tech benefits that are Delivered in PJ2 would populate cell E3 ('Tech -Enabled') in Table 2 with:
Continued maintenance of hardware.
Increased capacity.
