I have recorded a macro in Excel that copies the contents of a cell in one worksheet, then goes to another, selects a column, runs the Find command and then pastes the clipboard contents into the "Find what" field.
Naturally when I read the code back in visual basic the macro is now programmed to always search for the data I copied from the original cell. The problem is the data in that cell changes all the time so I need it to always copy whats in there and paste it into the Find what field.
I am trying to paste data into cells that are offset from specific data in my excel sheet.
The code I've got so far is:
[Code] ....
What I am aiming for is to search my Columns G and H that contain the values 1 & 1. Then from the cells that contain those variables, move 2 row up and 7 columns to the left and then paste on that active cell.
I am completely new to VBA so im sure there plenty wrong with this VBA script but so far ive managed to paste the data but it just pastes across the whole row instead of just the cells ive copied.. now i just get errors on the script.
I got 2 columns A and B, I need to find if the cells in colume B are in cloumn A and do some copy pasting. But sometimes when it cant be find in column A, then VBA shows an error message. What I want is if it cant be find in column A, then skip it and go to the next cell of B and find it in A again. I think it can be done with On error resume next, On error goto 0, but i cant make it work.
I need to find the row number of the first instance of the string 'TIMEACT in column A. I know that it must exist at some point in column A, but I do not know where. Column A might have 100,000 entries... ie: a very large number, so I'd appreciate it if the code could be very general.
I am trying to provide a search string and then loop round searching for this search string until the beginning find cell is found again however I am having problems making my code work - here it is:
I have one sheet in my workbook called 'mapping' which has a list of codes on it, the length of which will vary on a periodic basis.
I have another fairly large sheet on the workbook called 'data' (around 2000 rows) that will also vary in size. I want to do a search on the data tab for each code that is contained on column 4 of the mapping tab and if the code is found, enters the corresponding value from column 1 of the mapping tab to the cell 6 columns to the left of where the code was found on the data tab (cols H and B in this case). Hopefully that makes sense!
The issue I have is the codes maybe contained more than once on the data tab so I need the find/replace command to search the whole of the data tab and perform the task each time.
I have a spreadsheet that I'm using as a call log for a support desk. Sometimes, when the problem is outside of my scope, I have to call in a ticket to a helpdesk.
I want to keep the call log separate from the ticket list, but I want to be able to reference a ticket number for a specific call or vice versa using a command button.
I want to use one button with a macro attached to it to locate data on a different worksheet. So I highlight the "activecell" I want to find on the other spreadsheet then click on the button and it goes to the correct spreadsheet and filters for the data I want (relevant to the activecell).
Is it possible that when you press a command button, that the first thing it does is to execute the code assigned to another command button (IE in another sub).
For simplicity sake if I wanted to paste the letter A in to a cell that already had the letter B in it to make the cell read AB how could I achieve this?
Is there any way to tell (from VBA) what GUI command is currently in progress or what the last command used was?
On a wish list perhaps: Application.LastCommand and/or Application.CurrentCommand
Let's say I'm in the "Sheet_Change" event and want to know what caused the change. Was the event triggered by "Delete", "Paste", "Keystrokes" ...
AutoCAD VBA has "Begin_Command (CommandName as String)" and "End_Command (CommandName as String)" events which I find very useful. Basically I'd like to emulate that to the greatest extent possible.
Application.Caller does not seem to work for the stated purpose. I've been searching for a workaround by means of reading the "Undo Stack". Numerous articles written by experts state that the undo stack is not accessible from VBA.
I've considered reading the text from the "Undo" button's caption but it just seems like such a hack ... not that this whole idea isn't a hack
How can I return name of a command button on click? I want to create some sort buttons on a sheet I will use regularly to speed things up. I thought if I could call each sort button by the column letter the button sits in I can use this in a single sub for all buttons
e.g the button sitting in column A is called "A". when i click the button, it returns it's name to a variable which I can then use to sort column A. I know I could create a seperate routine for each button but I was just trying to think of something neater.
I have a macro that is checking to see if a column meets my criteria. If it does I have it set up to copy the entire row and paste it to the next sheet. How can I write the code to tell it to paste to the next available row on that sheet?
If I want to "Insert Copied Cells" in place of Yellow on Row1 and shift the cells down, the rows would look like this:
[Code] .....
How can I make it so the rows would be the following during such a paste:
[Code] .....
This is because I have hundreds of cells that I need to insert as columns all the while pushing complete rows down. If you're trying to understand why, it will be for some online marketing purpose as demonstrated here in this sheet: [URL] ...
I have the following which works as it should. However I want to tweak it so that instead of the Environ Username getting pasted into the sheet under the last used row in Column U, it pastes the environ username in the first blank row it finds in Col U starting from row 1 and looking down.
I've got cells which change after I use Solver to do simulations, These cells after the calculation is run I'd lke to paste into a seperate sheet and row for example (in preparating of charting them for example)..
I would like to paste it as folllows for example... .. but problem is, let's say the below list are in column A of the new sheet, than column B would be the first output of the calculation in the other sheet, column C would be the second output from the calculation in the other sheet. and so on..
I don't know the first thing on scripting, but I'd like to click on button where the calculations are made which when clicked on ,will paste to the other sheet in this sort of manner below.
Each calculation will use another column.. so the script must recognise there is other columns to the left already filled, ie. B, C, D, E F, coresponding to the results of calculations already performed.
I have 2 excel sheets with Donor ID numbers on both sheets. What I need to do is match them up I need 3 rows Original # Assigned # Invoiced #
the original number and the invoiced number will be the same number, but I need to copy the invoiced number to the other sheet that has the original and assigned #'s on it and match it up.
I am trying to use the code below to select certain information from different areas of each sheet in the workbook and paste it onto the List sheet one after the other so I end up with a long list made up of short lists off each sheet. The macro runs through each sheet OK. each sheet has the correct area I want to copy highlighted, so I know it's selecting the right area for copying, but the 'List' sheet is blank, i.e. nothing has been copied to it.
This macro is one I'm trying to put together from other macros I already have, and they all work
Sub Generate_Repair_Kit_List() For Each ws In Sheets ws.Activate Const testColumn = "A" ' change for your data Dim lastRow As Long Dim topCell As Range Set topCell = Range(testColumn & 1) ' top of column lastRow = Range(testColumn & Rows.Count).End(xlUp).Row 'work up from the bottom until we hit 'a cell that has a border on the bottom edge. Do While lastRow > 1 lastRow = lastRow - 1.........
I want to either retain validation in a cell when I paste data into it - or
I want to apply a validation to a cell which already has data in it.
The validation only seems to work when you apply the rule to an empty cell then manually enter data into it. I ideally want to be able to paste multiple columns into validated columns to check for format compliance.
I need to paste Entire row in one sheet( Sheet1) to the previous row in other sheet(Sheet2) ex: If i copy 3rd row from one sheet(sheet1) than it must be copied to 2nd row in other sheet(sheet2)
Sub try() Sheets("Sheet1").Select Range("b2").EntireRow.Copy Sheets("Sheet2").Select Range("b2").EntireRow.Previous.Select ActiveSheet.Paste End Sub
