I want to use one button with a macro attached to it to locate data on a different worksheet. So I highlight the "activecell" I want to find on the other spreadsheet then click on the button and it goes to the correct spreadsheet and filters for the data I want (relevant to the activecell).
View 6 Replies
I am using following command to check if a command button with 'Email This Page' written on it Exists in active worksheet or not. It always gives not present.
Dim s As String
On Error Resume Next
s = Application. CommandBars(1).Controls("Email This Page").Caption
If Err.Number = 0 Then
MsgBox "It exists"
Else
MsgBox "Not here"
End If
I have a spreadsheet that I'm using as a call log for a support desk. Sometimes, when the problem is outside of my scope, I have to call in a ticket to a helpdesk.
I want to keep the call log separate from the ticket list, but I want to be able to reference a ticket number for a specific call or vice versa using a command button.
On the attached example, i have a check-box with controls cell M4.
There is also a command button on here, which i want to be visible when the cell value of M4 is "TRUE" and not visible when the cell value is "FALSE".
I assume i need to write some code into the worksheet to do this but don't know what to do.
This is what i have but its not working.
Code:
Private Sub UserForm_Initialize()
CommandButton4.Enabled = Not (Sheets("0").Range("J8") = "Off")
End Sub
i have a workbook with two sheets. i have a command button on sheet 1 that inserts another worksheet from another workbook based on a cell value in sheet 1. i would like this specific command button on sheet 1 to be hidden or disabled until a value is entered into a certain cell on sheet 1 that matches a value in a named range on sheet 2.
View 7 Replies View RelatedI would like to be able to Click a Cell or Button to enable me to go from the 'VIN ENTRY' worksheet to the 'Date Completed' worksheet and then be able to enter the Date in the Correct cell cooresponding to the last 6 digits of the VIN. I have included the File
WorkSheet 'Date Completed
ENTER Last 6 Digits of VIN:K43070Click
Here to Enter Date Completed
WorkSheet 'Date Completed
Colum A Column B...................
I've been using the following code to bring in individual cell values from one closed workbook to an active one. I would like to modify this is possible to bring in multiple cells at once and also pull them into a different worksheet in the active workbook. Basically, my command button is on Sheet1 but I'd like the data to pull into a cell on Sheet2.
Private Sub CommandButton1_Click()
With Range("Q9")
.Formula = "='C:Users[Workbook Name.xlsm]Worksheet Name'! N27"
.Value = .Value
End With
I inserted a Command Button ("Button1") in a Worksheet ("Sheet5"). I want to disable this button while the vba is running. How do I refer to this form control from vba?
View 1 Replies View RelatedNot to sure if it can be done but i would like to have a button on my spread sheet that once pushed it automaticaly saves my worksheet as a PDF in a selected company folder in my documents.
I know if you go to file and save as PDF, then save in selected folder will work, just looking for a quicker way so my staff just needs to push one button on the worksheet and it does it all. (dummy proofing the form i guess)
I need to enable and disable command buttons in my code. These command buttons are located on sheets. I assume that I can simply set the Enable property, but I am having trouble referencing the command button. I thought I could simply reference it by name but that is not working.
View 3 Replies View RelatedI want to hide a command button when a worksheet is protected and unhide when the sheet is unprotected.
View 14 Replies View RelatedWhat command should I use if I want to activate sheet1 by clicking a coomandbutton1 on sheet2?
View 5 Replies View Relatedi have one workbook consist of many worksheets, i want to have command button in sheet 3 that if i click the button the sheet1 and sheet2 will copy to another new workbook.
View 9 Replies View RelatedI have a main worksheet that has two combo boxes. The first combo box has a list of machines. The second combo box brings up a list of models for the type of machine selected. I would like to insert a command button, that when pressed will open a different worksheet with the specs of the model selected in the second combo box. I am having trouble finding a starting point for the code to have the command button perform this.
View 6 Replies View RelatedI have a combobox that is referenced to a named list 'ListReels'. There are only 8 choices (Reels 1 -8), and each has an accompanying worksheet in the workbook. The user selects a reel, then inputs other information. When an 'Enter' command button is clicked, I had like the data to be entered onto the next available row of the worksheet with the same reel name (eg, if reel 2 is selected from the combobox, then the data should be added to the Reel 2 worksheet on the next blank row.
View 4 Replies View RelatedI have a workbook with two worksheets, "Main" and "Control".
Both of them are with hidden tabs (unchecked "show sheet tabs").
On worksheet "Main" I have command button which opens worksheet "Control".
The assigned makro is: Sheets("Control").Select
The problem is: when I open "Control" and close after that the workbook, the next time when I open the workbook "Control" pops-up instead of "Main" even though I do not save it.
1. I need macro on "Main" which will allow me to open "Control".
2. Regardless I "Save" or "Don't Save" "Control" when selected and workbook is closed, to open the workbook always displaying worksheet "Main".
I use Excel 2007 (at home) & 2010 (at office).
Is it possible that when you press a command button, that the first thing it does is to execute the code assigned to another command button (IE in another sub).
View 9 Replies View RelatedIs it possible to hide a command button if a cell value is 0, and unhide if the same cell value is 1.
View 9 Replies View RelatedI have a command button on a worksheet, not in a user form. I know the command button has a property called Visible that I can manually set to False.
I want to set this property to False if the value of the B3 cell is less than 2.000
How to hide command button based on another cell?’ [URL] .....
This works faultlessly but for only 1 Button. I tried adding in the code again for a second Button but it creates a conflict. I made a slight adjustment to your original code, to show the button when the cell is populated, which works well…
[Code] .....
Any way I can:-
1. Add additional buttons which reference their own cell?
CommandButton4 – H9
CommandButton6 – I9
CommandButton2 – Q9
CommandButton3 – S9
2. And add one button which activates based on one of 3 cells?
CommandButton1 – J9 &/or V9
I have sheet1 having two formulas. Ideally I can copy and paste the formula to the entire column, However this then populates , say 3000 cells unnecessarily which slows down excel performance or increases size of the file.
I am looking for a vba ( this is used to open userform) To include copy formula from filled cell above to next empty row ( cells will be in column K & L)
So every-time userform is opened, the formula is copied to next empty row.
[Code] .....
I have a command button on a worksheet, not in a user form. I know the command button has a property called Visible that I can manually set to False.
I want to set this property to False if the value of the B3 cell is less than 2.000
I've got a problem with the used spinbuttons. The code I used (see below)allows the user to choose a column (with the option button(A,B,C,D,E) in which changes would be made and than changes the value of the given cell according to the name of the spinbutton (which specifies the row). This forces me to use about 80 spinbuttons in a single sheet, and the whole workbook comprises of over 30 sheets pumping the whole file to a size of over 3 MB. To reduce the file size I need a code that would link a master spinbutton (one per sheet) to any active cell (the "just clicked one")
Private Sub sel(ByRef Column As String)
For Each obj In Application.ActiveSheet. OLEObjects
If obj.progID = "Forms.SpinButton.1" Then
obj.LinkedCell = Column & (Val(Mid$(obj.Name, 11)) + 3)
End If
Next obj
End Sub
Private Sub OptionButton1_Click()
sel "b"
End Sub
Private Sub OptionButton2_Click()
sel "c"
End Sub
Is it possible to create a command button to print the sheet, and, have a prompt come up and ask you to enter a date? Then that date is entered in a cell and the sheet prints? Just not sure where to start. I know how to make the command button and get to the view code for the button.
View 9 Replies View RelatedI have created a cover sheet with various command buttons linking into the available worksheets. I was wondering if it is possible to set the title of the command buttons by linking them to the text in a particular cell in each work sheet??
View 3 Replies View RelatedHow can I return name of a command button on click? I want to create some sort buttons on a sheet I will use regularly to speed things up. I thought if I could call each sort button by the column letter the button sits in I can use this in a single sub for all buttons
e.g the button sitting in column A is called "A". when i click the button, it returns it's name to a variable which I can then use to sort column A. I know I could create a seperate routine for each button but I was just trying to think of something neater.
I have a userform with a button on it named But1. Is it possible to store But1 into a variable then activate the But1_Click action using a variable?
Dim strButname As String
strButname ="But1"
Now, how would you activate the But1_Click method using strButname variable. With listboxes you can use the Control(strListboxName) methodology?
This doesn't work, but gives you an idea of what I am trying to do.
Controls(strButname)_click
I have a data validation list in cell D11 on sheet "Data Entry" and a command button "btnMultipleProperties" that I only want visible if "Multiple" is selected in "D11" I have the below code in "This Workbook" in VBE but it doesn't work. What did I miss?
Private Sub Worksheet_Change(ByVal Target As Range)
With Sheets("Data Entry")
If [D11].Value "Multiple" Then
btnMultipleProperties.Visible = False
Else: btnMultipleProperties.Visible = True
End If
End With
End Sub
I'm trying to make a command button copy the text from a text box on a multipage control to the active cell in the sheet. I have been able to make it paste the text once it is manually selected and copied to the clipboard but that is all. I've tried recording a macro but that doesn't seem to work in the userform. I need it to copy the text from the active multipage tab (from a textbox) and paste into the sheet's active cell.
