Find Current Date On Several Sheets & Convert Surrounding Cells To Values
Dec 2, 2009
I keep track of values in a workbook. I accumulate them on a daily basis (business days) and keep track of the older values.
On the first sheet I have all current values automatically displayed.
All subsequent sheets contain the values for the different locations (>60) by one location per one sheet with multiple entries per location.
Most of the values do not change daily. So I copy the values from the previous day and paste them to the current day’s fields (the row below yesterday's values).
Today’s date (and prior dates as well as subsequent dates) are in column A, the values to be copied are in column B through AZ. With over 60 sheets this job becomes very tedious very quickly...
What I would like to be able to do, with a click of a button, is to go into each sheet (except the first one), go to the current date (in column A), select the field to the right of that date (in column B), go up one field, select both fields (today and last business day) and go from B to AZ (or A to AY in relative terms) copy all those entries, go down one field (to the same row as today’s date) and paste the content. Then repeat that for every following sheet…
As the date field that I am looking for goes down one field with each day I cannot use fixed points to copy and paste from, but have to use the date field as an anchor from whence to find the proper cells.
I do have some values in the following day's fields, that is why I need to copy two rows and not just the values from the previous day...
View 4 Replies
ADVERTISEMENT
Aug 1, 2008
I'm trying to create a spreadsheet to update daily, whenever our market intelligence arrives by email. I'm not trying to write a macro which can select a range of cells (G:L) relative to the date in Column B, which represents the value in cell P6. In other words:Read the value of cell P6 Find that value in column B (e.g. B646)highlight the cells in columns G through to L on that row (e.g. select G646:L646) I am then aiming to paste the values in that range of cells, so that those stay in the spreadsheet and are not lost when the next lot of figures comes in the following day.
Range("G646:L646").Select
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
ActiveWindow.SmallScroll Down:=12
Application.CutCopyMode = False
ActiveWorkbook.Save
but that's obviously a static range, rather than looking up the date first.
View 2 Replies
View Related
Jan 24, 2007
I am pasting a large amount of data from a sql server query into excel. There is multiple tables output in each query. Some of the data is date/time and excel is formatting all of these cells to time. The date/time cells to not neatly line up in any row or column, so I cannot just format any give column or row. I need a macro that will find all of the cells that are formatted as time and change them to a date format.
View 7 Replies
View Related
Jan 9, 2011
I looking for a macro that will go through multiple sheets & change specific cells to values if the column header is = to value set in specific cell.
for example
I would like the macro to look at row 3 in each tab (page 1, page 2, page 3) and if the value you is equal to X (parameter input on different sheet) then change the formula to a value in row 6 & row 12 of that column.
I'm attaching an simple example that i looking for this on. The green cells are the one i would like to change to a value.
Book1.xlsx
View 8 Replies
View Related
May 27, 2009
i have a table with a row of dates along the top. beneath each date is a value.
the dates and values in these cells changes based on info in other sheets.
i need a way of finding the first date in the current month and returning the corresponding value.
View 9 Replies
View Related
Apr 23, 2008
If I write some VBA that selects a specific cell, for example the highest value in a coumn of data, how do I then copy a given (say 3) cells above and below (and including) this selected cell.
View 6 Replies
View Related
Jul 9, 2009
I have a spreadsheet of our Customers rankings with a column with the date that they sent their Report Cards in. I need to pull by Cust# the most current date. I tried using DMAX but I can not get the formula to work. The sheet is not sorted and can not be sorted by Cust#.
=DMAX(A$6:D$886,"Report dated",G$6:G7)
range field criteria
Title row starts at 6
A B C DCust #Marketing LocationCustomerReport dated1034ColmarScientific Systems11-Nov-021032ColmarRaymond4-Feb-031029ColmarPhiladelphia Gear6-Feb-031028ColmarPall4-Apr-031016ColmarGreene Tweed 22-Apr-031032ColmarRaymond6-May-031032ColmarRaymond15-Apr-041012ColmarATK Launch Systems, Inc.27-Apr-041032ColmarRaymond22-Oct-04
View 20 Replies
View Related
May 16, 2008
I have created a simple command button for tallying that will increase the count in the output cell by one every time it is clicked. It has basic code like this:
Private Sub ProductRegistration_Click()
[D4] = [D4] + 1
End Sub
On top of that, I want the output cell of this command button to switch every day. In this case, it would move to E4 tomorrow. The columns are dated but I can't figure out how to get the output cell to automatically change with the system date so I don't have to manually change it every day.
View 3 Replies
View Related
Apr 22, 2008
I have a workbook with multiple worksheets. First 4 tabs are the standard tabs and rest of the tabs are created based ona macro with the unique names. Now i want to create the separate workbook for each tab by its name and , date and time stamp in a C directory.
View 5 Replies
View Related
Jan 5, 2007
how can I create a formulae that
Highlight a Cell IF
Its surrounding cells are
+1 or +2
-1 or -2
away from that cell value.
Attached a file for example.
View 5 Replies
View Related
Aug 16, 2013
I'm trying to find a formula that will allow me to show a value based on whether certain dates have passed. This is for the purposes of calculating PTO hours and removing unpaid holiday hours from the equation.
I've got "slave" cells set up with the dates and amount of hours for each holiday, but I'm having some trouble.
I've been trying something to the effect of:
=IF(B4>B14,8 IF(B4>B15, 13))
Now, I can get it to show the "8" if I keep only the first IF function, but adding additional F functions like in the formula above only returns errors.
My goal is to get B7 to show the sum (through formula or manual entry) of C14-C21 based on whether B4 [=NOW()] is before or after the corresponding date in B14-B21.
I need to clarify any terminology or other cell values.
View 2 Replies
View Related
Nov 17, 2009
I have 2 columns of data and want to be able to merge as follows
COL A COL B
4123567 123.45
4125467 900.56
4356456 456.32
need to get result of
COL a
4123567
123.45
4125467
900.56
4356456
456.32
View 4 Replies
View Related
Feb 27, 2009
DATE function won't return TODAY()'s year in the "year" slot.
Is there a way convert, for example, 2/8/1963 to 2/8/2009 without using Concatenate?
View 9 Replies
View Related
Feb 22, 2013
Code to enter the current date in column if the values are entered in the adjacent column's.
View 2 Replies
View Related
Jul 13, 2014
Macro that will perform the following.
Search for the current date in a range of cells and then select the cell next to it.
View 6 Replies
View Related
Apr 22, 2008
I want to make a sheet that will lock cells from rows that have passed the yesterday date. In A column i entred the days and the locked row must have the range from A to U. After i read the post from here Lock / Protect Rows Past Due Date any solution.
View 3 Replies
View Related
Jul 25, 2013
Sheet1 is a report that expresses 90 days of information and Sheet2 has three columns of 365 day information. Sheet1 has a title, a today function for the date (cell B2), two columns (A5:A94 and B5:B94), and then some other info not relevant to the problem. Sheet2 has three columns (A1:A365, B1:B365, and C1:C365) with the date in column A starting at the first of the year and then two lists of information in columns B and C. I am wondering if there is any way excel would be able to recognize the Date (B2) on Sheet1 and be able to pull the information from Sheet2 starting on that date for the next 90 days.
For example:
My report always starts on the day I am accessing it. So... Say it is 1/15/13. My today function in Sheet1 (B2) would express 1/15/13. This date would be equal to A15 on Sheet2. So I would want A5 & B5 on Sheet1 to return B15 & C15 from Sheet2 respectively.
A5 Sheet1 = B15 Sheet2 & B5 Sheet1 = C15 Sheet2
A6 Sheet1 = B16 Sheet2 & B6 Sheet1 = C16 Sheet2
...
A93 Sheet1 = B103 Sheet2 & B93 Sheet1 = C103 Sheet2
A94 Sheet1 = B104 Sheet2 & B94 Sheet1 = C104 Sheet2
With that being said, the next time I open up my report, say a week from the 15th or 1/22/13 (expressed by my today function in B2), I would want A5:A94 & B5:B94 to reference the new set of information:
A5 Sheet1 = B22 Sheet2 & B5 Sheet1 = C22 Sheet2
A6 Sheet1 = B23 Sheet2 & B6 Sheet1 = C23 Sheet2
...
A93 Sheet1 = B110 Sheet2 & B93 Sheet1 = C110 Sheet2
A94 Sheet1 = B111 Sheet2 & B94 Sheet1 = C111 Sheet2
Is this at all possible?
View 8 Replies
View Related
Mar 2, 2008
I currently have a sheet that shows monthly tasks and their due dates. There is also a control that when clicked, resets the due date to the following month of the same day.
What I would like to do is setup some type of reminder such as either flash the due date cell if possible or change the fill color. It should do this when the system date is = to or 4 days before the due date.
The only way I can see doing this is using VBA, which I do not know very well.
View 3 Replies
View Related
Jun 5, 2014
I have set of user-form contains with Combox & 2 textbox and to generate report one cmd button
I have 3 different sheet contains report of daily activities ( Dispatch,Closed,Cancel)
If Dispatchcalls Select In Combobox1 ,Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from dispatchcalls Then Save Data Into Excel File As "Dispatchcalls".
If Closedcalls Select In Combobox1 Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from Closedcalls Save Data Into Excel File As "Closedcalls".
If Cancelcalls Select In Combobox1 Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from Cancelcalls Save Data Into Excel File As "Cancelcalls".
"C:UsersmaniDesktopNew folderLenvo_ReportsONSITE CasesVlokupuf" This is path i stored existing 3 file dispath,closed,cancel
View 3 Replies
View Related
Mar 11, 2014
I needed a code that would input the current date and time in the cells in column N whenever changes were made to any cells in the row from columns A to M. For example, if I change a name in cell 6D, then cell 6N would automatically change to the current date and time.
I found a useful code on a forum (maybe here, don't know for certain) and modified it to suit my needs (see below). I am however now getting a debugging error suggesting that the second line that reads "Private Sub Worksheet_Calculate()" is causing an error.
View 11 Replies
View Related
Mar 4, 2012
I have a Macro 'Timenow' to give current time in a Cell of MS Excel, but then it changes all Cell values of sheet where the macro was used.
Sub Timenow()
'
' Timenow Macro
' Keyboard Shortcut: Ctrl+b
ActiveCell.FormulaR1C1 = "=NOW()"
Selection.NumberFormat = "h:mm"
Range("F5").Select
End Sub
Even assigning value to variable does not work:
Sub Timenow()
' Timenow Macro
' Keyboard Shortcut: Ctrl+b
Dim TN As String
TN = Format("=now()", "h:mm")
ActiveCell.Value = TN
End Sub
how to restrict the macro to change the value of current/active cell only without effecting other cell values?
View 4 Replies
View Related
Mar 19, 2009
i attached a spreadsheet with the column that needs to be converted to date. When i try to format cells i get a return of ##############. I tried changing to number and text to columns and still get the same result. I need it to look like 08/16/2008 ect.
View 2 Replies
View Related
Aug 23, 2013
I have 2 sheets that i need to find what the same valued cells are.
1 sheet has names and i need to find the rows where those same names are on the 2nd sheet.
The formats are different (upper-lower case) and there is additional text as part of the cells in the 2nd sheet. (i.e prod123.web.corp.com) and i just need to find the prod123 parts.
View 9 Replies
View Related
Jan 14, 2014
I am currently working for data validation team. I have to validate tons of data every week so it would be great if i could remove dupicates.
I want to compare two worsheets, sheet 1 has the order number with description (which i have to find) for the current month and sheet two has got standard report from the past week giving all the order numbers with no description. I need a VBA based macro to find all matching order numbers which are in sheet 1 column A, in sheet2 column A and return the corresponding value in column B in sheet 2 and also return the description in Column C.
View 6 Replies
View Related
Aug 22, 2013
SM extract 8.21.2013 Cust-sample.xlsx
I want to highlight the cells under System Name (col 1) in sheet 1 that are found in Host (col 1) in sheet 2 "OCPtabvHost"
The text isnt in the same format in the 2nd sheet (it is lower case and has additional text). I need to find the duplicate roots
View 8 Replies
View Related
Oct 24, 2013
The old thread is here: [URL] ....
There are three sheets in the workbook, Project, Tasks and Details and the expected resulting sheets are RESULT, In_Tasks_but_NOT_in_Projects and In_Details_but_NOT_in_Projects .
But now what I am looking for:
1. Copy the Projects data as is in the RESULT sheet.
2. Then in the Tasks sheet, if the ID matches paste the matching rows under the data from Projects (as in the result sheet with Orange colour)
3. If the ID is present in Tasks but NOT in Projects then copy it into the In_Tasks_but_NOT_in_Projects sheet.
4. Then If the ID and the Name in the Details tab matches with the data in the RESULT sheet then paste it under the ID and Name (as in the result sheet with Green colour)
5. If the ID does not match the ID in the results sheet then copy that row into the In_Details_but_NOT_in_Projects sheet.
The result of the current macro that RHCPgergo worked with are in the last sheet.
The formatting and colour of the rows doesn't matter, it is more of nice to have.
View 14 Replies
View Related
May 27, 2014
I have an excel workbook with 60 sheets (each contain data in the same categories and in the same column locations, just different information on each sheet). What would the VBA code look like if I wanted to manually enter the find and replace values and perform the function (find and replace) across multiple sheets in the workbook?
View 5 Replies
View Related
Jan 29, 2010
I have the following VBA code, which works nicely -
PHP For Each C In Sheets("data").Range("A2", Range("A2").End(xlDown))
C.Offset(0, 5).FormulaR1C1 = "=IF((RIGHT(RC[-1],3)=""ago""),RC[-1],"""")"
Next C
What I want to do is Paste As Values to each of the cells in the above to convert the formula to a static value,. Is there a simple bit of code I can include in the above loop, instead of doing a Selection.Copy Selection.PasteValues etc over the range?
View 2 Replies
View Related
Dec 11, 2012
I have 5 sheets, each sheet has 1 column of data (column A). I want to find the values that exist in all sheets. I will gather all values in 6th sheet, and I want to write "YES" in column B next to value that exists in all 5 sheets. How can I do this? For example:
[Code] ......
View 3 Replies
View Related
Dec 12, 2011
way to search and display a date from a range of cells based on less than or greater than criteria. For example I have following dates in column A:
A1: 2011/01/04
A2: 2011/02/01
A3: 2011/03/01
A4: 2011/04/01
I want to search for the date which is less than 2011/02/01 from the A column and display that date in B1 cell for example. How do I do that?
I want to do this without using any macros.
View 9 Replies
View Related
