I have 2 columns of data and want to be able to merge as follows
COL A COL B
4123567 123.45
4125467 900.56
4356456 456.32
need to get result of
COL a
4123567
123.45
4125467
900.56
4356456
456.32
I need a code or macro which, when applied to a selected column, will merge a range of cells in that column into one cell. The criteria is to merge all cells into one cell that fall directly under the cell which contains "Items - total..." and that lines are separated by a line break (alt+enter).
Here's an example of what the column contains:
Before code:
A1: Items - total: 2
A2: four-legged
A3: cat
A4: two-legged
A5: chicken
A6: Items - total: 1
A7: four-legged
A8: dog
A9: Items - total: 3
A10: four-legged
A11: pig
A12: two-legged
A13: eagle
A14: marine animal
A15: shark
After code:
A1: Items - total: 2
four-legged
cat
two-legged
chicken
[Code] .......
I have a list of values, some are like values, others are not. is there a way to have the column to the right automatically merge the cells which have like information to their left. Attached is a sample file. I want to be able to have the cells in column B automatically merge based on the values in column A. I'm not sure if this can be done, but figured I would ask before I spend hours merging cells.
View 2 Replies View Relatedexcel.JPG
Is there any way to Merge the cell and coloured automatically by Date range same like above picture. In the Image:
"MERIAN FROM 1/1/2014 12:01:00 AM TO 1/2/2014 10:15:00 AM" is Merged and Coloured according to Date January 1 and Time 00
Same also...
"SILVER FERN FROM 1/2/2014 1:20:00 PM TO 1/3/2014 11:20:00 AM"
Macro that will perform the following.
Search for the current date in a range of cells and then select the cell next to it.
I'd like to sum a range of cells if the date in the adjacent cell is last month, so... A2:A1000 holds the dates and B2:B1000 holds the values, i'm trying to figure out how to sum all of the values for the previous month (i.e. June).
View 7 Replies View RelatedTwo Sheets:
1) Top Sheet
2) IRA
- Cells A4:A10 of sheet "Top Sheet" contain dates. i want B4:B10 to show the IRA value as of the date in column A:
____A__________|_B______________________
4 | 09/22/2005 | $ Total as of date in A4
5 | 10/06/2005 | $Total as of date in A5
6 | 10/20/2005 | $Total as of date in A6
7 | 11/03/2005 | $Total as of date in A7
8 | 11/17/2005 | $Total as of date in A8
9 | 12/01/2005 | $Total as of date in A9
10| 12/15/2005 | $Total as of date in A10
- Cells A6:A12 of sheet 'IRA' also contain dates but not in the same sequence (some date ranges had several transactions), B6:B12 of sheet 'IRA' contains the transaction values during the date range:
____A__________|_B______________________
6 | 09/22/2005 | $100
7 | _ _ _ _ _ _| $200.................................
I want to count no of "yes" in Range Column B only if corresponding values in column A is less than 10/06/2008
Please see the attached file for refrence
I'm using the following code (found here: [URL]......) populate dates in row 13 for a dynamic Gantt Chart...
[Code] ....
It works perfectly to display daily dates in the mm/dd format. Now I want to have an overarching month/year displayed over the entire range for any particular month by merging and centering the cells above the month's dates the above code populates, and pull in the month/year formatted as mmm-yyyy. I've attached a mock up I did manually to convey the desired result.
MergePic.JPG‎
I want to make a sheet that will lock cells from rows that have passed the yesterday date. In A column i entred the days and the locked row must have the range from A to U. After i read the post from here Lock / Protect Rows Past Due Date any solution.
View 3 Replies View RelatedCode to enter the current date in column if the values are entered in the adjacent column's.
View 2 Replies View RelatedSheet1 is a report that expresses 90 days of information and Sheet2 has three columns of 365 day information. Sheet1 has a title, a today function for the date (cell B2), two columns (A5:A94 and B5:B94), and then some other info not relevant to the problem. Sheet2 has three columns (A1:A365, B1:B365, and C1:C365) with the date in column A starting at the first of the year and then two lists of information in columns B and C. I am wondering if there is any way excel would be able to recognize the Date (B2) on Sheet1 and be able to pull the information from Sheet2 starting on that date for the next 90 days.
For example:
My report always starts on the day I am accessing it. So... Say it is 1/15/13. My today function in Sheet1 (B2) would express 1/15/13. This date would be equal to A15 on Sheet2. So I would want A5 & B5 on Sheet1 to return B15 & C15 from Sheet2 respectively.
A5 Sheet1 = B15 Sheet2 & B5 Sheet1 = C15 Sheet2
A6 Sheet1 = B16 Sheet2 & B6 Sheet1 = C16 Sheet2
...
A93 Sheet1 = B103 Sheet2 & B93 Sheet1 = C103 Sheet2
A94 Sheet1 = B104 Sheet2 & B94 Sheet1 = C104 Sheet2
With that being said, the next time I open up my report, say a week from the 15th or 1/22/13 (expressed by my today function in B2), I would want A5:A94 & B5:B94 to reference the new set of information:
A5 Sheet1 = B22 Sheet2 & B5 Sheet1 = C22 Sheet2
A6 Sheet1 = B23 Sheet2 & B6 Sheet1 = C23 Sheet2
...
A93 Sheet1 = B110 Sheet2 & B93 Sheet1 = C110 Sheet2
A94 Sheet1 = B111 Sheet2 & B94 Sheet1 = C111 Sheet2
Is this at all possible?
I currently have a sheet that shows monthly tasks and their due dates. There is also a control that when clicked, resets the due date to the following month of the same day.
What I would like to do is setup some type of reminder such as either flash the due date cell if possible or change the fill color. It should do this when the system date is = to or 4 days before the due date.
The only way I can see doing this is using VBA, which I do not know very well.
I have a spreadsheet with 'due date' for returns in column L and 'received date' for returns, in the adjacent column M.
I would like to get the due date to turn red when it is overdue, ie. the date in the cell has arrived and no return was submitted. By trawlling the forum, I managed to accomplish this with the following in conditional formatting:
Cell value is less than or equal to =TODAY()
All's great.....but - I would like the date to turn back to black if I enter a date in the adjacent received column, column M.
In other words, I want to flag a problem if the due date has passed, but once I receive the return and enter the date I receive it, i would like the due date entry to revert back to the original formatting ie. black. So only the outstanding returns are highlighted.
I needed a code that would input the current date and time in the cells in column N whenever changes were made to any cells in the row from columns A to M. For example, if I change a name in cell 6D, then cell 6N would automatically change to the current date and time.
I found a useful code on a forum (maybe here, don't know for certain) and modified it to suit my needs (see below). I am however now getting a debugging error suggesting that the second line that reads "Private Sub Worksheet_Calculate()" is causing an error.
I keep track of values in a workbook. I accumulate them on a daily basis (business days) and keep track of the older values.
On the first sheet I have all current values automatically displayed.
All subsequent sheets contain the values for the different locations (>60) by one location per one sheet with multiple entries per location.
Most of the values do not change daily. So I copy the values from the previous day and paste them to the current day’s fields (the row below yesterday's values).
Today’s date (and prior dates as well as subsequent dates) are in column A, the values to be copied are in column B through AZ. With over 60 sheets this job becomes very tedious very quickly...
What I would like to be able to do, with a click of a button, is to go into each sheet (except the first one), go to the current date (in column A), select the field to the right of that date (in column B), go up one field, select both fields (today and last business day) and go from B to AZ (or A to AY in relative terms) copy all those entries, go down one field (to the same row as today’s date) and paste the content. Then repeat that for every following sheet…
As the date field that I am looking for goes down one field with each day I cannot use fixed points to copy and paste from, but have to use the date field as an anchor from whence to find the proper cells.
I do have some values in the following day's fields, that is why I need to copy two rows and not just the values from the previous day...
I have a workbook with 30 worksheets. Each sheet has 84 rows of data (start in 15 columns (A to O). I would like to create a summary sheet that only shows the most important data from each sheet.
The summary sheet would have 12 lines of headers and formatted crap at the top.
The Summary sheet header columns would be:
Site (A), Date (B) Health (C), Status (D), Critical (E), Task (F),
Dependencies (G), Owner (H), T-Date (I), Task Date (J), Mitigation Date (I)
The data in the sheets are not in that order, of course.
That
1. puts the name of the sheet I am copying from in column A
2. the deadline date in Column B (that date is always in C10 of each worksheet)
3. and copies Cells from Column A,B,G,H,I,O in any row in which the value in A is not "good" into columns C through H. I would like to paste those rows into the summary sheet. I have code that loops through the sheets and rows in each sheet to find the rows to copy. I can copy cell values directly from the active sheet to the summary sheet, but because I am copying a cell at a time, it takes 7 minutes. Yes I am impatient :)
Here is the code snippet where the copying is done:
Dim sh As Worksheet 'current worksheet
Dim DestSh As Worksheet 'worksheet in which to paste summary
Dim Last As Long
Dim CopyRow As Long 'row to copy
Dim LastCopyRow As Long
[Code] ........
ExitTheSub:
Application.Goto Sheets("KMARollup").Cells(1)
End Sub
I think there must be a way to use ranges to build an array of cell values and paste only once but I am lost here.
I have a couple of spreadsheets that has several columns each containing several hundred thousand rows of codes. To quickly analyze this data, I am trying to come up with a conditional formatting formula to highlight the respective cells when specific values occur next to each other. A particular code will show up in many cells, but the code that is the respective adjacent cell is always different. I need to know when row A contains, for example, '9928559' and row B contains '36415RT'.
View 3 Replies View RelatedI am trying to merge text, in four adjacent cells in the same row (say cells A1,A2,A3 and A4), into a single cell (say cell A5).
I would like a comma or full stop and then a space between each item merged (cell A5).
The text to be merged may appear in any one of the four cells (cells A1 to A4). Those cells without text are blank.
Only where all 4 cells are blank, will I need cell 'A5' to indicate this.
The formula needs to be relative as I will need to copy the formula down the spreadsheet so that it applies to additional rows.
I’m trying to make my life a bit easier, by adding a few macros and formulas to the spreadsheet (Everything was done completely manually before I got here!!!).
What I would like to do is take two columns, which contain a start and end time for work shifts, and colour them GREEN once I have entered a name in the Worker column (Along side the two with the time), and also to fill a cell with a Yes or a No. I’m aware of auto conditioning, and I’ve tried to have a play to get this to work, but I just can’t work it out.
I have posted a link to an image which shows what I want. I hope I've explained it well enough!
http://img530.imageshack.us/img530/6239/excelspfk0.jpg
I would like a macro that when run, finds empty cells in a column within the used range and fills them with the same formula in the other cells in the same column but relative to the row.
I have a basic understanding of VBA so if someone can set me on the right track i'll have a go myself as i appreciate this would take a while to write out from scratch.
I need to mine a huge spreadsheet of about 30,000 cells and make columns from specific words. As in.
I need to search for all words "table" even if the word is "My_table" or "aTable" and suck them into one column. I have to do this one several words.
Let me know if you have the solution. I am trying to write something but I am unsure of the syntax at this level.
This is a project plan with tasks and dates. Column A is the activity number. (Example 1, 2, 3" etc). Column B is the task (Ex. "Complete Report"). Column C is number of days required to complete the task. Column D is the dependency column. (Ex. Cell D2 =1 in other words Task 2 is dependent on task 1). Column E is the date.
I would like to have a seperate start date cell and a go live date cell.
The objective is to enter a start date, and have each column E date increase based on the number of days entered in Column C. If a task is dependent on another and I change the number of days in Column C I need the dependent task to change the same amount of days.
I have data written in Cells B5, C5, D5 etc that changes as you add more column data
I am trying to figure out how to merge cells starting from Cell B3 based on used cells in row B5 to end of column.
Code:.....
I am constantly editing this (we currently have over 100 accounts) and therefore the totals are changing.I have a formula for Total but I need formulas for the other two, based on when the cells in columns F and J are blank or have dates in them: For active, the total is the sum of all numbers in column M but only when there is a date in column F and a BLANK in column J. For yet to enter, the total is the sum of all the numbers in column M but only when both column F and column J are blank. At the moment, my accounts run from row 6 to row 142, with the first line of totals in row 145, however this is constantly expanding.
I have multiple sheets cataloging multiple vehicles' mileages in multiple areas (one sheet per month). I want to reorganize this data by Vehicle ID rather than month.
Here is an example spreadsheet to help explain
I have attempted this by writing this formula ...
I'd like to merge (and position in the center) all identical rows within column A without affecting the columns to the right of it. I have attached a small sample of what I'd like to accomplish.
View 5 Replies View RelatedI have 500+ rows of data in column A (Credit), with corresponding data in column B (Cash). I use "=SUM(LARGE(A:A,{1,2,3}))" in C1 to find and sum the three largest "Credit" entries, how do I sum the corresponding cash values associated with those three large credit entries?
View 9 Replies View RelatedI have two simple columns of data: one with names (Column A) and the other with numbers (Column B).
I am looking for the most efficient way of selecting cells in Column B of a certain value and also selecting the cells to the left of those selected cells in Column A.
I have the current code based on SpecialCells, it works most of the time but for some reason it's buggy and sometimes returns an error. Is there another way doing this without using Special Cells?
Code:
Sub SelectbyValue()
Dim Cell As Object
Dim FoundCells As Range 'Range that's found
Dim WorkRange As Range 'Range to search
Range("E1:F4").ClearContents
[code]....
I am trying to find a solution for highlighting cells in a column that are repeats, ie. >3. I also need these cells to only be highlighted if the adjacent cell in the next column contains specific text. I have tried using conditional formatting with a countifs formula to no avail.
View 2 Replies View Related