Following on from Location Of First (Left-Most) Negative Value In Range
I'd like to construct a formula which gives me the position of the right-most negative value in range.
The values in the range could be positive, negative, zero, blank or text.
I am trying to write code that will locate either a 0 or the smallest negative number in a range, eg,
example 1,
8, 6, 2, 0, -0.5, -2
the result would be 0
example 2,
8, 6, 2, -0.5, -2
the result would be -0.5
I have data in range J2:J365 , H368:H401 & J403:J827. i want to check wether this range have negative values or not if yes load all negative values in the listbox1 by clicking checkbox.
View 3 Replies View RelatedI am trying to show how many years it will take for a retiree to run out of money.
row 1 is his available money (this in determined with other formulas such as income - expenses ect)
Row 2 is number of years (J2 would be 10 years)
Let's say available money turns negative on the 10th year (tenth column "J")
How can I write a condition statement that will say that says if the amount in row one is positive do nothing, but when it turns negative add row 2 of whatever column it turned negative in?
Example:
A B C D E F G H I J K L
5000442538503275270021251550975400-175-750-1325
123456789101112
I have a very large worksheet (row count maxed in 2007, and then some), for which I need to do the following: search column A for a string that will occur many times, and then check the 10 cells that follow in its row for negative values, dropping some sort of indicator in the 11th (shading it red or something would be fine). An additional bonus would be if the 10 cells that possibly contain a negative could be summed (the sum could serve as the indicator?). If no negative is found, nothing need be done, and the macro should chug along searching A for the next reference to this string.
My hope was to do a sort of "With Range("A:A"), .Find("MyString")", save position as StartPos, do the 10-cell row checking in a nested IF or For (though the For would take a long while, checking each cell individually), then doing a .FindNext after StartPos until = StartPos (does .FindNext loop back to the top?). The formatting of the indicator cell in the 12th cell in each relevant row doesn't really matter, it's more just for jumping to critical rows.
I have a series that comprises of two rows:
Row 1 is date
Row 2 are values
I am trying to find a formula where I can identify where in row two the value chages from positive to negative, and where it changes from positive to negative it should return the date the value changes from positive to negative ie:
ROW 1 08-Jan 09-Jan 10-Jan
ROW 2 1111 22222 -33333
The formula should identify that in row 2 the negative value occurs at -33333 and at the 10th of January.
I have a CountIFS formula for a cell range for a project for work
Code: =COUNTIFS($C$75:$C$1999,A71,$G$75:$G$1999,">=-1",$G$75:$G$1999,"
I am currently working on a project and encountering this problem with VLOOKUP.
I need to show the result into negative since it is negative on the table i made.
In my this scenario, it gives me this error "#N/A" even if the value is in the table.
Here are the details:
3 columns
RANGE Minutes
0.02
0.03
[Code].....
my actual table is upto minutes of +960 and -960 and still planning to go up until +1500/-1500
I have named the table as "TABLE" and the value is on "F3" I am using the command =VLOOKUP(F3,Table,3,TRUE) but if the cell is negative it return positive value how do i change the formula so it return the value to negative if it shoud be negative?
I also attached the file as your reference.
I need this to get the value in minutes if it is within the value in the range.
Each row contains a series of values which are not sequential.
For each row I want a formula which gives me the location (i.e. column 10) within that range of the first negative value, searching from left to right.
I have a large dataset (24000 rows) that requires me to multiply two different columns of integers. In some cases, the two integers are both negative and multiplying them results in a product that is positive. I actually need that product to be negative rather than positive. I can't quite seem to figure out the best way to accomplish this.
View 5 Replies View RelatedMy check register was exported to a excel spread sheet where the deposits and debits are all in one column E. The debits are entered as a negative number. I want to create two separate debit and deposit columns with the appropriate data entered. What the best way of moving the data accordingly?
View 3 Replies View RelatedI have data that comes from a subsytem that places the negative sign at the right of the number, so it is recognized as text. I can get around this using find and replace and then a second step to multiply that by -1, but is there a formula that can do this for me?
I was trying if(right(A1,1)="-",TBD,A1)
I have data starting in E7. I want it to go down the column and find the negative numbers. If it finds one then I want it to change the number in the row to the left of it to a negative. So if E67 is a negative number, make D67 a negative and so forth down the line Sounds "simple" but how do I do it?
View 7 Replies View RelatedI am creating a template in Excel 2010 and am having some issues due to a combination of positive and negative values. Specifically, I have a named range of values that can have either a positive or negative deviation from zero. I need to return the value that has the greatest deviation from zero (either + or -) based on criteria in another named range I have used the following array formula with success for the "Y" range:
{=IF(PRB=M1,INDEX(Y,MATCH(MAX(ABS(Y)),ABS(Y),0)),MAX(Y))}
However, if there are not any negative values, as in the "Z" range, it only returns MAX(Z) for the entire range, when I would like ti to return "0.00134" (the largest deviation from zero based on the PRB range criterai. Would this be better accomplished using VBA?
PRB
Y
Z
A90B90
A90B-90
[Code].....
i have spent 40 hours, and still didn't find a solution. Please help is need it!!
example:
i have to find all articles with same code (222). first one has Q =100 second one Q=250.
soled Q=150
(i am talking about 5000 rows, 400 different or same articles per month- 12 months)
columnA-----columnB---columnC
222 ----------100---------0
111-----------50
333-----------70
222----------200---------200
333---------- and so on
first i have to deduct from the first one it finds (max. till 0 ...it can not be negative) ....after finding another one it deducts the rest---it means 50
Is there any kind of formula with this possibility.
if it is poorly writen please let me know for more info.
i am not an expert in excell, but i have tried variations of sumif, vlookup functions, but i always get stuck deducting the whole Quantity from all of the same (222) articles .
i want to put a subject for a negative values, how should i do it?
For example:
lookup_value: -1000
table_array:
<0 - Poor
0-10000 - Good
> 10000 - excellent
is it possible to do this? ALternatively see the (new) attachment for clearer question.
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
I'm trying to make a by month spreadsheet that has all twelve month ranges starting in for a3. in a3 it would have the start date and in a4 it would have the end date. I'm trying to locate all of the dates between those two dates and pull in the profit ammounts from another sheet, the results would be in row 5. I would also like to pull in the loss amounts and have them in row 6. All corresponding with the date range in rows 3 and 4.
View 9 Replies View RelatedI have a module that contains the lines below:
Dim myRng as Range
set myRng = Range("B1:B100").Find(what:= "Symbol")
I have run this module frequently and successfully over the past several months, during which time Column B has been hidden. When I tried to run it today I got a Run-time error 91: Object variable or with block variable not set. I checked to see that "Symbol" was present in the stated range (it was), and noted that when I went to debug the Run-time error, myRng was 'Nothing'.
Now I find that if I unhide the column before the set myRng statement, the code runs without a hitch.
My question is: Is there a known restriction on the Range.Find Method that prevents its use on a hidden range?
I have the following columns and rows that I need to MOD by 15. Once they have been MOD, I need to set a range and find all numbers in that range of say, eg; all number between 9.6 and 9.8. Really hope someone can help, have been working on it day and night. I can do them one at a time, but is very time consuming. Is there a formula that will do the whole worksheet in record time?
2/18/1975, 156.7519, 175.8083, 235.4675, 253.765
4/11/1973, 237,7642, 346.5342, 113.3145, 321.435
5/12/1985, 342.7625, 123.4233, 253.4321, 357.234
etc.
etc.
etc.
I have a table of financial data based on individuals contributing to a non-profit by year over 6 years.
I am looking for assistance in determining the first year of contibution, the last year of contribution and also the gap year if any of giving.
I am trying to find a specific value if the cell falls in between a certain range. Currently I am using a nested if statement to find this value but would like something easier to work on. I am trying to find the MAV based on weight. Currently this a formula that I am using.
[Code] .....
Attached is part of the table it is drawn from.
mav.jpg
Is there an easier way to do this? I want to have a value in a cell of say 100 g and that would return an MAV of 7.2 g.
Please see attached : Excel Problem.xlsx‎
In the Worksheet sheet there are two columns:
Value - value to find in the Report sheet which identifies the table
Assigned Name - name to assign the table
Basically, I need a macro that will:
> Find the value in the Report sheet
> Select the current region except the 1st row
> Name the selection the assigned name
So for example, for Total Received and Shipped (cell A2 in Worksheet):
> Find the value "Total Received and Shipped" in Report (cell B2 in Report)
> Select the current region except the top row (A3:C9)
> Name the selected range as "Total_Received_and_Shipped"
And vice versa for the other values in the Value column.
In vba code, how can I restrict my "find" to a given range? I'm dynamically building the range (anywhere from 5 - 100 cells in column B on my spreadsheet) and need to see if two values are present anywhere in that range. There will be multiple "ranges" to search, all in a single column.
View 2 Replies View RelatedIn a range (a1:a10), how would I find the min and max? Then remove the min and max from the range. Then avg the remaining 8 calls.
View 6 Replies View RelatedWhy is this code not working? It don't return anyting else but 0.
Code:
Dim RowNo1 As Long Dim RowNo2 As Long
On Error Resume Next
With Application.WorksheetFunction
RowNo1 = Selection.Find(What:=.Max(ws3.Range("D3:D31").Value), LookIn:=xlFormulas, LookAt:= _
xlWhole, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False).Row
RowNo2 = Selection.Find(What:=.Max(ws3.Range("D3:D31").Value), LookIn:=xlFormulas, LookAt:= _
xlWhole, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False).Row
[code]....
Looking at the data below, Let's say that I have the number 12900. Can I have it look in column J and ignore all of the other numbers, then when it finds the right line, it copies (in this case) line name "A8346162"
Here is what my data looks like:
WDMS DSS ABCDEFGHIJ141LINEVOLUME FST_ORIG_TAPELST_ORIG_TAPEFIRSTRECLASTRECFIRSTSPLASTSPSEQUENCE_NUM142A8346481B08711B08712555190555194229424025688559412674143A8346321B08711B08712555195555197240324955593568812782144A8346161B08711B08712555198 249625175688566912875145A8346162B08711B08712555199555202252026215688559312897146A8346001B08711B08712555203555205262227175593568812999147A8345841B08711B08712555206555208271828135688559313095148A8345681B08713B0871455520955521228142913559356881149A8345521B08713B087145552135552152914300956885593101150A8345361B08713B087145552165552193010311055935688197151A8345201B08713B087145552205552223111320756885593298152A8345041B08713B087145552235552253208330355935688395153A8344881B08713B087145552265552303304340456885593491 Excel tables to the web >> Excel Jeanie HTML 4
I have a list of dates for a 10-year period in a range that is sorted in descending order and does not include weekends or holidays. The 10-year period is variable. Based on the date in Row 1, I want to return the row numbers for the date 5 years ago, 3 years ago, 1 year ago, 6 months ago, 1 month ago, and 1 week ago.
How can I do this using VBA? I tried calculating the date by subtracting a number of days from the date in row 1. For example, for 3 years ago, I'd use the date in Row 1 and subtract 1095, where 1095 comes from 365 days/year * 3 years. Using this method, the calculated date could be a Saturday, Sunday, or holiday. In that case, I want to return the row number that includes the date just before or just after where the calculated date would be. I tried using the Application.Match function, but ran into problems with it.
I have used the following match formula to find the position of the 1st non zero value in the range A1:A5;
=MATCH(0,A1:A5,1)
This formula works fine as long as there are not any zero values following the 1st non zero value. In the following case this formula doesn't work;
value 10value 20value 3100value 420value 50
The match formula above returns the incorrect answer of 5 instaed of 3.
I am trying to find the maximum value (MaxVal) in a range of cells and want to select this specific cell. I've found the GoToMax code to do this, which functions properly as long as I type in the cell values myself. However, the range from which I want the MaxVal come from a different worksheet by the Excel "Index"-formula. And somehow my code does not accept these values. Copy - Paste special. either.
Dim WorkRange As Range
Dim MaxVal As Double
Set WorkRange = Range("H11:H17")
MaxVal = Application.Max(WorkRange)
Range("H1").Value = MaxVal
WorkRange.Find(What:=MaxVal, _
After:=WorkRange.Range("A1"), _
LookIn:=xlValues, _
LookAt:=xlPart, _
SearchOrder:=xlByRows, _
SearchDirection:=xlNext, MatchCase:=False _
).Select