Set A Range And Find All Numbers In That Range
Oct 9, 2006
I have the following columns and rows that I need to MOD by 15. Once they have been MOD, I need to set a range and find all numbers in that range of say, eg; all number between 9.6 and 9.8. Really hope someone can help, have been working on it day and night. I can do them one at a time, but is very time consuming. Is there a formula that will do the whole worksheet in record time?
2/18/1975, 156.7519, 175.8083, 235.4675, 253.765
4/11/1973, 237,7642, 346.5342, 113.3145, 321.435
5/12/1985, 342.7625, 123.4233, 253.4321, 357.234
etc.
etc.
etc.
View 14 Replies
ADVERTISEMENT
Oct 16, 2004
Sheet4 in my book looks like this:
.............A.......................B................................C..................
I......Invoice No…..…Starting Serial No……...……Ending Serial No
2…………ND12………..6011000000013652……. ..6011000000103652
3…………ND13………..6011000000116526……....6011000000246977
4…………RF4……….….6006000001255724……..…6006000011249564
5.........RF4...........6005000000023652.........6005000000095624
note that the last 4 numbers of the series are randomly generated for security reasons and are not part of the range of the the serial No’s
So Invoice ND = 10 consecutive numbers, Invoice ND13 = 14 and Invoice RF4 = 1000 and RF4(again) = 8
The list on this sheet is a mile long
What I need is a “search box” with two windows in it
In one box I will type a serial number and in the second box I will get the Invoice number
The challenge is that the serial number could be between Starting and Ending serial No’s thus if I were to type serial number
6006000001086598 in the first box the answer in the second box will be : RF4
View 9 Replies
View Related
Oct 15, 2009
I have a range of values in a1:f500 the values are all numbers between 1-25. I then have a value in cell h1. what i need to do is find all numbers that equal to 9 in the range a1:f500 and replace all these 9's with the formula =$h$1 so that i can simply change the values in the range a1:f500 by changing the value to say 12 in cell h1. could someone please text me the vba code that needs to be entered for sheet 1?
View 9 Replies
View Related
Nov 9, 2012
I'm looking for a formula to find the minimum value in a non successive range of numbers (excluding zero values).
My sheet contains four fields of numbers (#1, #2, #3 and #4) and than start over again with number #1, #2, #3 and #4 etc. This goes on for approx. 25 4-column blocks. A simple MIN-formula or SMALL-formula doesn't seem to do the trick as it takes all values into account, not just the #1 or #2 or #3 or #4 values.
Example (cells A1..A24):
999-999-999-999-110-120-130-140-111-121-131-141-112-122-132-142-0-0-0-0-113-123-133-143
The minimum value of #1 (excluding the zero's) would be 110, the minimum value of #2 would be 120, #3 would be 130 and #4 would be 140.
View 4 Replies
View Related
Apr 2, 2014
I have a range of cells containing a string of numbers separated by ';' e.g.
COLUMN A COLUMN B
IDENTIFIER_011122;1942;2011;1869;2642;2729;2731;2655;2678;2341;2347;2354;2332;2506;1809
IDENTIFIER_021122;1942;2011;1869;2642;2729;2731;2655;2678;2207;2209;2217;2220;1880;2506;1809
IDENTIFIER_031122;1942;2011;1869;2642;2729;2731;2732;2648;2255;2207;2217;2220;2387;1880;2506;1809
IDENTIFIER_041122;1942;2011;1869;2642;2729;2731;2732;2678;2207;2209;2217;2220;1880;2506;1809
IDENTIFIER_051122;1942;1971;2011;1869;2642;2729;2731;2648;2678;2342;2354;2355;2207;2209;2217;2220;2398;1880;2506;1809
IDENTIFIER_061122;1942;2011;2169;1869;2642;2729;2731;2732;2678;2341;2343;2347;2354;2207;2209;2217;2220;1880;2506;1809
IDENTIFIER_071122;1942;2095;1869;2573;2587;2648;2655;2673;2207;2209;2220;1880;1809
IDENTIFIER_081122;1942;2095;1870;2642;2648;2673;2678;2341;1880;2506;1809
I am looking to find the top 5 most common/repeated numbers within this range. I have found a formula to work out the largest number within the range:
=MAX(IFERROR(0+TRIM(MID(SUBSTITUTE(";"&B3,";",REPT(" ",LEN(B3))),(ROW(A$1:A$200)*LEN(B3))-1,LEN(B3))),0)) (REF http://www.excelforum.com/excel-gene...e-numbers.html)
How to modify it to work with e.g. the mode function.
I know I could separate all the numbers out using 'text to columns' but I will need to work this out regularly on large quantities of data ...
View 13 Replies
View Related
Aug 6, 2013
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
View 9 Replies
View Related
Oct 10, 2009
I'm trying to make a by month spreadsheet that has all twelve month ranges starting in for a3. in a3 it would have the start date and in a4 it would have the end date. I'm trying to locate all of the dates between those two dates and pull in the profit ammounts from another sheet, the results would be in row 5. I would also like to pull in the loss amounts and have them in row 6. All corresponding with the date range in rows 3 and 4.
View 9 Replies
View Related
Jan 14, 2009
make this formula more concise and shorter, it was design to check a numbers in a range to see if any of them falls into a particular range.
=IF(SUM((COUNTIF(Fund,">11999")-(COUNTIF(Fund,">12999"))),(COUNTIF(Fund,">21099")-(COUNTIF(Fund,">28729"))),(COUNTIF(Fund,">28730")-(COUNTIF(Fund,">33999"))),(COUNTIF(Fund,">58999")-(COUNTIF(Fund,">59999"))),(COUNTIF(Fund,">82000")-(COUNTIF(Fund,">84999"))),(COUNTIF(FUND1,">11999")-(COUNTIF(FUND1,">12999"))),(COUNTIF(FUND1,">21099")-(COUNTIF(FUND1,">28729"))),(COUNTIF(FUND1,">28730")-(COUNTIF(FUND1,">33999"))),(COUNTIF(FUND1,">58999")-(COUNTIF(FUND1,">59999"))),(COUNTIF(FUND1,">82000")-(COUNTIF(FUND1,">84999"))))>0,"ATTACHMENT E IS REQUIRED","")
and if the any of the number fall into the range it will print the message, "Attachment is Required"
View 4 Replies
View Related
Feb 12, 2010
I have a module that contains the lines below:
Dim myRng as Range
set myRng = Range("B1:B100").Find(what:= "Symbol")
I have run this module frequently and successfully over the past several months, during which time Column B has been hidden. When I tried to run it today I got a Run-time error 91: Object variable or with block variable not set. I checked to see that "Symbol" was present in the stated range (it was), and noted that when I went to debug the Run-time error, myRng was 'Nothing'.
Now I find that if I unhide the column before the set myRng statement, the code runs without a hitch.
My question is: Is there a known restriction on the Range.Find Method that prevents its use on a hidden range?
View 9 Replies
View Related
Mar 11, 2013
I have a range of values in column A, I wish to add all numbers by all other numbers, i.e for a specific value in the range, I want to add it to all the other values in the range, and output the values in a new range.
For example for values 1,2,3,4 in range A2:A5, I want to output a new range the values;
1+2 =3
1+3 =4
1+4 =5
2+1 =3
2+3 =5
2+4 =6
e.t.c, beginning in range B2. No number can be added to itself.
View 1 Replies
View Related
Oct 20, 2006
I'm trying this formula but it does not work properly in cell S5:
=IF(ISNUMBER(SEARCH(MID(R5,1,1),K5:O5)*SEARCH(MID(R5,2,1),K5:O5)*SEARCH(MID(R5,3,1),K5:O5)),"win","lose")
I tried excel help and the great OZ but nothing exactly to my problem.
This is what I would like the formula to do.
Cell S5 would search the solutions cells( K5:O7 ) and compare them to either cell ( R5 for all 3 matching digits) or all combinations cells ( D5:I5 ) if a match is there then it would produce a "Win" if no match it would produce a " Lose "
I will need to be able to expand my range because my data will extend in the solution cells
I have attached a sample file for your review.
View 9 Replies
View Related
Feb 27, 2014
I'm going to be using a spreadsheet to keep track of where different people are at. So if Person 1 is in Room 3, I will stick a 3 in the box next to their name and then can look at the spreadsheet whenever I need and see what room they are in. When I'm deciding what room to put a person in, though, I need to be able to quickly glance at a list of Room #'s and see what one's are still available. So I have a bank of Room #'s in the spreadsheet....1,2,3, etc.
What I'd like, is some way to set this up so that when I put, for example, "3" in the cell next to "Person 1" the spreadsheet automatically removes "3" from the bank of available Room #'s and when I delete the "3" because the person has left, it adds "3" back to the bank of available Rooms.
View 7 Replies
View Related
Mar 5, 2012
I have a mass of data which look something like this:
table removed
and I require the ranges of reference numbers to be listed in a column one above the other, which requires inserting new rows. I also need the date & description columns copied down into the newly inserted rows.
So basically for example I would want the top row to now read:
table removed
and then apply the same procedure to the other ranges below this.
View 4 Replies
View Related
Aug 20, 2014
following issue:
The following table is given:
flower
20
rose
flower
21
rose
[Code] ........
Which needs to be turned into:
flower
20
22
rose
flower
31
32
blossom
tree
1
3
apple
The last column is the one that dictates when a new range of numbers start. There should be one range of numbers for Rose, One range for Blossom etc.
View 4 Replies
View Related
Sep 23, 2007
i have spent 40 hours, and still didn't find a solution. Please help is need it!!
example:
i have to find all articles with same code (222). first one has Q =100 second one Q=250.
soled Q=150
(i am talking about 5000 rows, 400 different or same articles per month- 12 months)
columnA-----columnB---columnC
222 ----------100---------0
111-----------50
333-----------70
222----------200---------200
333---------- and so on
first i have to deduct from the first one it finds (max. till 0 ...it can not be negative) ....after finding another one it deducts the rest---it means 50
Is there any kind of formula with this possibility.
if it is poorly writen please let me know for more info.
i am not an expert in excell, but i have tried variations of sumif, vlookup functions, but i always get stuck deducting the whole Quantity from all of the same (222) articles .
View 9 Replies
View Related
Sep 22, 2011
Looking for a macro that takes a range of numbers lets say A1 to A20 and goes down the list adding up the values to the point the sum becomes equal to 6. If the sum is greater than 6 then it backs off one. The sum should be entered in the cell next to where the 6 appeared or where it backed off. Exmaple if A1+A2+A3= 5.3 then the answer 5.3 is entered into cell B3. The trick to this is that I want this formula to loop until A20 is hit.
View 5 Replies
View Related
May 28, 2014
I'm attempting to create a formula that'll sort a range of numbers and then return the corresponding values based on a specific place within the sorted range.
In this case, I'd like the following numbers sorted smallest to largest:
15, 9, 11, 19, 22, 17, 24, 19, 17, 24
The result would return something like:
9, 11, 15, 17, 17, 19, 19, 22, 24, 24
Then I'd like it to return the value based off of the formula in cell U13 & U14. In this case, it'd return the value in the 2nd and the 9th position (bolded above). I tried to use INDEX(), but it's returning the values in the unsorted list. I'd like it to return values from a sorted list. Also, I'm trying to solve this using a formula (not Sort & Filter) or VBA.
View 1 Replies
View Related
Mar 15, 2007
Is there an easy way to round a range of numbers up? I have a big list of prices and I would like to keep the two digits after the decimal point as .00, but round up the main number. And I would like to do that without writing a formula in every cell. Is this possible?
View 12 Replies
View Related
Dec 30, 2008
So I have multiple columns of numerical data,
I have to find the sum of all numbers between 10 and 40 within a column, NOT cell 10 to 40 but the actual number 10 and 40.
How do I do that?
Is it SUMIF? I cannt seem to grasp this.
View 11 Replies
View Related
Jun 8, 2009
I want to count all cells over 1000 and then I want to count all cells over 990, but less than 999.
These are the formulas I am using
=COUNTIF(CN3:CU65,">=1000")
=COUNTIF(CN3:CU65,">=990")
In this formula, the over 990 also counts the ones over 1000 and I only want them to count 990 to 999.
View 3 Replies
View Related
Aug 28, 2009
I have tried over and over to get a point value from the percentages posted below but my formula will not return consistent results. Am I doing something wrong.
94% - below 1 Point
95%-96% 2 Points
97% 3 points
98%-99% 4 Points
0% or 100% 5 Points
Reference Cell is AG2 and is .99 but for some reason I return a 5
=IF(AG2=0,5,IF(AND(AG2>0,AG2<=0.94),1,IF(AND(AG2>=0.95,AG2<=0.96),2,IF(AG2=0.97,3,IF(AND(AG2>=0.98,A G2<=0.99),4,5)))))
View 6 Replies
View Related
Sep 16, 2009
A cell that will count an entry in another cell, within a range of numbers. EX: cell g1 will count the entries that range from 1000 to 1999 and 5000 to 5999 and 7000 to 7999. cell h1 will count the entries that range from 2000 to 2999 and 6000 to 6999 and 8000 to 8999. So if i had 6 cells with the following entries:
cell a1 - 1010
cell b1 - 2230
cell c1 - 5699
cell d1 - 6521
cell e1 - 7001
cell f1 - 8035
cell g1 would show 3
cell h1 would show 3
View 2 Replies
View Related
Dec 1, 2009
HOW DO i WRITE A FORMULA FOR 0 TO 5000 = 2% 5001 TO 10000 = 1% and over 10000 = .5%
View 2 Replies
View Related
Jan 22, 2014
I am looking for a function that gives a range of numbers a score, here is what i need:
if A1 is between 6&15 B1=25 if A1 is between 16&35 B1=15 if A1 is between 36&65 B1=5 if A1 is 66 or more B1=0
View 5 Replies
View Related
Dec 15, 2005
I'm making an eligibility chart based on income. If 1 person (equals a
household) makes between $0 and $1000 (household income) they are in "x"
category. if that person makes between $1001 and $2000, they are in "y"
category. If that person exceeds $2000, they are in "z" category. So I have
3 categories they can be included in (x=Free, y=reduced, z=paid...it isn't
just a true and false statement). The tricky part is the number of people in
the household. 2 to infinite # of people making in the range of $0-$1000
need to be in "free" category. 2 cells are being drawn from. A1 is the
number of people, A2 is the income, A3 is the formula for figuring their
eligibility. I need A3 to say "Free", or "Reduced", or "Paid" as the end
result of the data.
View 9 Replies
View Related
Feb 27, 2012
i have a range of numbers, 800 000 from 2 600 000 but i need to get them into numerical order packs, so i might end up with 100's of packs due to the ranges of numbers.
View 4 Replies
View Related
May 2, 2012
Need all numbers in between the ranges set. So if I input for example 8765 then the cell still comes up with 18.
IF Cell E25 is 0-7200, then 12, If cell E25 is 7201-14400,
then 18, if cell E25 is 14401 - 21600, then 22,
if cell E25 is 21601-28800, then 28, if cell E25 is 28801 - 36000, then 34.
View 4 Replies
View Related
Sep 23, 2013
I have 50,000 to 150,000 rows of data. Row M has data from 0001 to 9999. I need to delete all rows except the rows with values 2500 to 4999. I had this working with a similar and smaller spreadsheet awhile back using an advanced filter. In this case I need to delete the unneeded rows. I would imagine I could also achieve it with a VLOOKUP array and a lot of finagling but with this many records to repetitively
View 8 Replies
View Related
Jul 18, 2014
The two boxes up top will be my start and stop numbers. I want to generate all the numbers between (and including) the 'start' and 'stop' numbers in the top two boxes above using VBA and list them in the larger text box below (I've changed the background of the textbox to appear as it was a label, fyi).
View 9 Replies
View Related
Aug 28, 2007
Looking up value with a condition and range of numbers ....
View 9 Replies
View Related
