I can't seem to get the findnext to work. I can find the first instance but none after that. Here's my code.
Dim B As Range
Dim SheetNumb As Integer
SheetNumb = 1
Do While SheetNumb <= Sheets.Count
Sheets(SheetNumb).Select
If ActiveSheet.Name = "Page1" Then
Exit Do
End If
Set B = Sheets(SheetNumb).Cells.Find(" Mechanical", SearchOrder:=xlByColumns, LookIn:=xlValues)
If Not B Is Nothing Then
B.Activate
FindAddress = B.Address
Do
B = Sheets(SheetNumb).Cells.FindNext(B)
Loop While Not B Is Nothing And B.Address <> FindAddress
End If
SheetNumb = SheetNumb + 1
Loop
I have and interesting delimma and I have been spending way too much time trying to figure this out.
I have a value in column B "Agreement". I have data in column C which could be just about anything. I need to be able to find "Agreement" copy the value immediately above it and paste it next to the value in column C.
You see this gets difficult for me, because there are many spaces in the spreadsheet and there may or may not be a value in C.
Here is an Example: I need for the value above "Agreement" to bel placed in the same column where there is a value in C? Clear as mud. I need this for every occurence of "Agreement" in this column. There are many occurences of "Agreement"
On the worksheet, I need to find wherever the cell value begins '2 X 4 ...' in column L, and then replace the cell value in the same row, in column K, with '113010'. In my attempts, my code just changes the first occurrence, not all occurrences.
I want to use VBA to do this.
Here's my code so far:
Sub Update_Product_IDs()
Application. ScreenUpdating = False Dim i As Integer, iCount As Integer Dim numberOfPMDs As Integer Dim PMD_Name As Integer Dim worksheetName As String Dim worksheets_in_file As Integer worksheets_in_file = Worksheets.Count worksheetName = Worksheets(2).Name numberOfPMDs = worksheets_in_file - 1
I want to be able to search all of column A for the string "UNAUTH O/D FEE £20.00" and when it is found, add £20 to column B, and 01/01/00 into column D of the same row.
Sub feedate()
Set rd = Sheets("fees")
z = 20 x = 1 / 1 / 6
For i = 1 To rd. Range("A65536").End(xlUp).Row If UCase(Cells(i, 1)) = "UNAUTH O/D FEE £20.00" Then Cells(i, 2).Value = z Cells(i, 3).Value = x End If Next i End Sub
how to write a vb code to do the following actions with an excel sheet, which contains a dump from SAP. This dump usually consists of anywhere between 25 to 30 columns and about 20000 to 30000 rows…
1. Find all rows which contain “VN” and place it into the sheet Vendor Charges (which already exists). Which could be in any column
2.Find all rows which contain “MT” and place it into the sheet Material Charges (which already exists).
I have attached the excel sheet to better explain what I had in mind. ‘sheet1’ contains the raw data from SAP but, the number of columns varies every time so it cannot be directly sorted by selecting the column. I tried recording a macro but, as I don’t have a constant sheet to work with each time the macro obviously doesn’t work.
Range B3:B1000 is text strings. Column C2:C50 is a list of words that I would like to "Find" in Column B and replace with it's lowercase values unless they start off the string.
Example
Find all occurences of And or AND and replace with and Find all occurences of With or WITH and replace with with. Find all occurences of Or or OR and replace with or
I am having trouble getting my IF statement to test if the cell contains the text "sale" return "X" if not "Y". I need it to search through the text string in that cell and find a certain word, and if it finds that word, retrn a value. I am really having difficulty with is what symbol or function do I use for the logical test? (i.e. =, <>, MATCH, INDEX?)
Attempting to hide columns (of cities) via VBA generates an error when that same city is reselected (either individually, or as part of the group) in the list box, upon clicking the 'Hide' button.
I'm trying to use this Find Method and combine it with a countif or loop. Something that will count a number of occurences of a unique type of character. I'm looking to find all "F" characters in Bold, Italic and Size 16. Here's my find code that I'm trying to use. I can get it to work by itself but not along with a countif or loop.
Sub count_4() Dim r As Range Set r = Range("A1:A6") With Application.FindFormat.Font .Bold = True .Italic = True .Size = 16 End With r.Find(What:="F", LookIn:=xlValues, LookAt:=xlWhole, SearchOrder:=xlByRows, _ SearchDirection:=xlNext, searchformat:=True, MatchCase:=True).Activate End Sub
The current spreadsheets add up each persons totals by matching the name in each tab with the name of the person who won the job located in current orders tab.
BUT.....If two salesman pair up on up on a job then the formula doesn't recognise the joint name. eg Gary/paul in row 69 (current orders).
I need the totals to half the job and add it to the salesmans total accordingly. There is no 'Paul Tab' as he is our MD and doesnt have a target.
i have spent 40 hours, and still didn't find a solution. Please help is need it!! example: i have to find all articles with same code (222). first one has Q =100 second one Q=250. soled Q=150 (i am talking about 5000 rows, 400 different or same articles per month- 12 months)
columnA-----columnB---columnC 222 ----------100---------0 111-----------50 333-----------70 222----------200---------200 333---------- and so on first i have to deduct from the first one it finds (max. till 0 ...it can not be negative) ....after finding another one it deducts the rest---it means 50 Is there any kind of formula with this possibility. if it is poorly writen please let me know for more info. i am not an expert in excell, but i have tried variations of sumif, vlookup functions, but i always get stuck deducting the whole Quantity from all of the same (222) articles .
Dim c, DataRow With Data Set c = . Range("A5:A350"). Find(KPI, LookIn:=xlValues) If Not c Is Nothing Then DataRow = c.Row End If End With
Now,If KPI is for example = "Favourite Hotel" and if i have data that looks like :
Favourite Hotel - London Favourite Hotel - Cardiff Favourite Hotel Favourite Hotel - Birmingham
Then it seems to not look be looking for an exact match (e.g. Favourite Hotel) and rather is finding the first item in the list that contains the KPI string (E.g. Favourite Hotel - London).
These are some data that I have ( inputs and outputs). I was wondering if there is anyway to find this equation. I can get more data if that helps in finding the equation.
I have dates in column A (Source Dates) and Column C (Target Dates). All data is formatted as Dates. I want to find which dates in column A have a matching date in column C. When using the find statement within a For Each loop I can not find a date match unless I format the target dates as General. How can I use the Find Statement using dates without formating the target dates as General?
Option Explicit
Dim SourceDate As Range Dim TargetDate As Range
Sub FindTargetDate() Columns("C:C").Select Selection.NumberFormat = "General" For Each SourceDate In Range("A1:A32") 'MsgBox SourceDate Set TargetDate = Sheet1.Range("C1:C7").Find(SourceDate, LookIn:=xlValues)
Private Sub cmdShowdata_Click() Dim Tgt As Worksheet Dim Source As Range Dim wbSource As Workbook Dim cel As Range Dim rng As Range Dim c As Range Dim i As Long Application. ScreenUpdating = False Set Tgt = ActiveSheet Set wbSource = Workbooks.Open("C:Documents and SettingsDesktopStaff Recoed 2") Set Source = wbSource.Sheets(1).Columns(1) With Tgt .Activate 'clear old data Range(.Cells(3, 2), .Cells(200, 5)).ClearContents ' Loop through names in column A For Each cel In Range(.Cells(3, 1), .Cells(Rows.Count, 1).End(xlUp)) If Not cel = "" Then...................
The above vba command which is extract the data from the Other workbooks. It looks for the "Staff 001", "Staff 002"...these parameters to transfer the data to the worksheet. But, the "Staff 001" data must appear twice in each workbooks. If i use the above command, i only can extract the FIRST "Staff 001" average data. But SECOND "Staff 001" average data cannot extract. I know it may be use FindNext method to do this but i am not sure how to write it
i am trying to do a search and i came across this. In the excel file attached you will see 2 column. Now if you take copy and paste "sterling rd" which is standing alone into the crtl F search field. It wont find it.
I have played with the format (made both general), i have CLEAN, Proper the text and tried that didnt work either.
I dont know what else to try. I am working with access, with a much larger list, however the linking to excel wont work and i know there is some difference font or format that i am missing.
There are groups of similar ID numbers in Column J. For a group of similar ID numbers in consecutive rows there is only one row that has a number greater than 0 in its Column L cell and the rest of the cells of Column L for that set of similar IDs is filled with 0s.
First for that unique ID group I need to find out which row is it that has a value greater than zero in its Column L cell.
Then I need to use that value to fill the rest of the 0s in Column L corresponding to that set of Unique IDs.
The process continues with identifying similar IDs in Column J and this time doing the same thing for their Column M. I have attached a sample file that shows the data and how the results need to look like.
giving me a macro to find a word in a sentence by using the "FIND" method. For example I have a sentence say "I am happy" in which I have to search whether any of 2 words say "Happy" or "Sad" is there or not. If the sentence contains any of these words, then that row has to be highlighted.
I am trying to look up a numerical value in Sheet 1 Cell:F7 and find that value in Sheet 2 Column B, then offset 29 columns in the row where the value was found. The number will not have any duplicates within Sheet 2.
After doing a search, I need to ask an Excel 2003 question. I'm creating a tool to open three sparate workbooks. One is the driver and I need to use it to pull data from the second and then to place that data along with additional data into the third.
My driver data may consist of a single value or multiple values separated by semi-colons in a cell. A single value works fine. The first value in a multi-value condition works fine. the second find, however, gives me an object error. I'm using the " split" verb to separate the values. Here's my code. Have you any idea why the second find is throwing up this error when the first find works correctly?
varData = Split(strRef, ";", -1) For J = 0 To UBound(varData)
varSrchVlu = Trim(varData(J)) ' do the ARIS Exrtact matching Workbooks(strManualFile).Activate Workbooks(strARISExtract).Activate ' Activate ARIS Extract Sheets("Processes").Cells(2, 1).Activate Workbooks(strARISExtract).Sheets("Processes").Range("A2").Select Workbooks(strARISExtract).Sheets("Processes").Columns("A:A").Select
I'm putting together a database in Excel and there is a particular item that I am having trouble with. I need to count the frequency of occurences in between events over a series of cells.
This:
ABBBAABBAB
Needs to be tracked like this:
ABABAB132211
Basically I need to write it so that when A occurs it counts how many times B occurs immediately after, until the next A. Once that is figured out I should be ok counting double A occurences.
Column A - has data but there are data which occur more than once then it will be counted to column C
Reason is I need to delete the data with several occurence at column A so when I see the count at column C then I can be aware how many times the data at Column A occurs so I can delete it by filtering the data.
I have a list and the list contains the same string multiple times. I am trying to take that list and print it in column D and then list in column E the number of times that string appears in column A. S for example I would like the list to output
Col A | Col B| ....| Col D | Col E | String1__________String1 3 String1__________String2 1 String1__________String3 2 String2 String3 String3
I have a list with several stocks tickers and the respective quantities and prices on three columns: example below. I wanted a formula to list all different occurrences of each stock only once. Later on I would consolidate all trades.
stock / price / quant / expected list A / 10 / 1000 / A B / 20 / -2000 / B C / 25 / 500 / C D / 30 / 2000 / D E / 15 / -2000 / E B / 20.5 / 1500 A / 10.2 / 1200 D / 29 / -500 C / 25 / 800 E / 16 / 2000
how many dates appear in a column. I have a spreadsheet wherein when a name is encoded in column A, the date is automatically logged in column B. Now, i need to count how many of those dates occurred in column B.
For the month of May - how many 1 May 2007, 2 May 2007...an so on.
After that - i need to match those dates to the name of the encoder and a another encoded status. It's like - 1 May 2007+john+approved = 1 occurence. I need to count them separately and combined.
