Attempting to hide columns (of cities) via VBA generates an error when that same city is reselected (either individually, or as part of the group) in the list box, upon clicking the 'Hide' button.
The error happens at this point: ...
I need to find, then replace a particular value ("/0"), however, some cells may be hidden. And I just discovered that I can not replace the value of a hidden cell! Am I missing something, or do I have to unhide the row/column that the cell is in and then replace it? ...this does not replace the "/0" with "0" if the row the cell is in is hidden.
Sub test()
Dim rMatch
Set rMatch = ActiveSheet.Cells.Find(What:="/0", LookIn:=xlValues, LookAt:=xlWhole)
rMatch.Value = "0"
End Sub
i am trying to do a search and i came across this. In the excel file attached you will see 2 column. Now if you take copy and paste "sterling rd" which is standing alone into the crtl F search field. It wont find it.
I have played with the format (made both general), i have CLEAN, Proper the text and tried that didnt work either.
I dont know what else to try. I am working with access, with a much larger list, however the linking to excel wont work and i know there is some difference font or format that i am missing.
i am trying to write a macro to find the text "total" in the first row and first column. and this macro works fine for first row:
View 5 Replies View RelatedHow to find out which columns are hidden on a worksheet that has ~20 columns using VBA.
View 3 Replies View RelatedI want to find if a cell C1 is existing in columns A, B, D, or E. So I want to specify multiple discrete columns in a match function.
View 13 Replies View RelatedI have two columns of account numbers. Column A would be considered the master list. Column B is data that changes on a monthly basis. What I would like is for a macro to compare column B to Column A and if it finds any account numbers not listed in column A it will insert a row into column A and copy/paste the account number from column B to A. Both rows are sorted assending so if its possilbe I would like the macro to insert the account number where it belongs or maybe just resort column A once it has finished. My knowledge of macros/VBA is very limited at this point
View 2 Replies View RelatedI'm using the Find function in VBA on a column of data, but the range is being set to Nothing if the data item I'm looking for happens to be in a row that is hidden at the time. How do I set the find to look in all rows, hidden or not? Can this be done without unhiding all the rows first?
View 4 Replies View RelatedI have a macro that converts all my PDF Purchase Orders to a text file and inserts the data/text horizontally into another document. However because the PDF's or the text within the PDF can be fomatted differently (that is on different lines etc) it therefore imports the information and it looks mis-aligned.I have attached a simple spreadsheet showing some sample text as it is imported and then below this how it should look like, all in line.
The range where the highlighted text in red is, is variable (but say nothing more than a variant of 10 columns). The text can also be Uppercase or Lowercase.So, I was wondering if there is macro code to find the "text" on various rows/columns and align it all in another column?
I am trying to find some number which i have from a list of numbers available in various rows, for eg
11
7
11
13
17
i am tryng to find 11,13,14,15,16.... 38 from columns given i.e. 7,11,13,17....
I work at a club. I've got a spreadsheet sent to me from another club we do business with. On it are charges from their club to ours that list the charge and associated member number.
I'm trying to use the text to columns feature to separate the member number from the other data in the column so I can sort by member number making it easier for us to bill our members.
Here is a sample of the data:
"Beach Club Bar,b500"
"Beach Club Bar,s200"
"Beach Club Bar,a150"
When I try to use text to columns what happens using the comma as a deliminator, everything including and after the comma disappears.
Thinking that maybe I needed a space between the comma and the member number (in the first line b500 is the member number) I tried to use find and replace to replace , with , and a space after it. This also resulted in all of the data including and after the comma disappearing. I'm sure I'm missing something here.
I tried copying the data into a separate spreadsheet. Tried changing it to text or general.
I typed in the exact data as you see it and tried the text to column function and it worked perfectly. What could be hidden in the data in that column that's causing this?
how do you find the number of rows and columns of an array?
View 4 Replies View RelatedI'm trying to come up with a formula to find the last row without any data in columns E and F and delete the 10 rows below them. Is there a way to do this?
View 3 Replies View RelatedI have a workbook in which I have two sheets. One sheet is a report and the other is a data dump. The data dump has headers in in column A starting in cell A6 and headers in row 5 starting in cell B5. There is then data going from B6:J20.
In my report I then I have same setup with headers in column A and row 5. The difference is that the headers are not in the same order as the dump. What formula could I use that would look for the two headers in my report sheet and then match it with the value in the data dump that uses the same two headers?
I have a report that comes in a txt file. After importing into excel i am left with a bunch of garbage that i dont need. This report is anywhere from 5-15 pages depending on how much product was made that shift. I only need the information off of the 1st page. My question is how can i Find the first occurance of specific text (Site) (will be in column A) and have it select that row and all rows below and delete them.
My biggest issue is the first page can be anywhere from 40-60 rows so I need to find the text (Site) and delete everything below it, which could be anywhere from 500-1500 rows.
I have a list of new payments received (sheet 2) along with their agreement numbers which I want to match to the list I had last month (sheet 1) to see which agreements are still paying, which have stopped and if there are any new ones.
The problem is that the the list of new payments received shows the agreement numbers with random prefixes and suffixes so my lookup returns #N/A
Sheet 1 - 24020130
Sheet 2 = 24020130FLE
My basic thinking (and I mean basic) is to do an edit/replace on sheet 2 entries and replace the FLE's with with nothing thus removing them completely then running the lookup but that doesn't tell me which are new payments received.
Then I could make sheet 1 text blue, sheet 2 text red, combine them, re-sort and manually go through the list but I'm hoping there's a sexy formula just waiting to be unleashed.
I am having trouble getting my IF statement to test if the cell contains the text "sale" return "X" if not "Y". I need it to search through the text string in that cell and find a certain word, and if it finds that word, retrn a value. I am really having difficulty with is what symbol or function do I use for the logical test? (i.e. =, <>, MATCH, INDEX?)
View 4 Replies View RelatedI have 2 sheets. On one sheet, this column J2:J490 contains text that either says "TRUE" or "FALSE" and another column AJ2:AJ490, text that says "FEES". (many of the other cells in this column say something else). I need a formula that can find the matching text TRUE/FEE or FALSE/FEE in these columns, count them, and give me the product.
View 9 Replies View RelatedI have spreadsheet with data all over. I want a macro which identifies the first cell (in Column A) which has the text "BNY" and insert 6 blank rows above the text "BNY" (First text in the Column).
Once, it is done - the macro should also assign names to the last inserted row.
Column A - Should reflect "Bank", Column B should reflect "Field1", Column C should reflect "Field 2" and Column D should reflect "Field 3".
And after the names are assigned - It should also highlight the last inserted row in Yellow.
For Example:
Raw Data (Snap):
Bank
Field 1
Field 2
Field 3
JPM
123
456
789
[Code] .....
Output (After Macro):
Bank
Field 1
Field 2
Field 3
JPM
123
456
789
[Code] .......
I am trying to create a macro that will delete everything below a certain word.
The code I tried to use is the following. This produced an error:
If Range(Cells(1, 1), Cells(180, 1)). Find(" Interest Expense").Row = 0 Then
iStart = Range(Cells(1, 1), Cells(180, 1)).Find(" NET INCOME").Row + 1
Else
iStart = Range(Cells(1, 1), Cells(180, 1)).Find(" Interest Expense").Row + 1
End If
Rows(iStart & ":" & FinalRow).Delete shift:=xlUp
I am having trouble with the Find method in Excel VBA.
This is the piece of code that I have written:
Sub NCMVariables()
Dim x As Integer
Dim c As Object
Sheets("Data").Select
With Worksheets("Data"). Range("A1:A60000")
Set c = .Find("USD", LookIn:=xlValues)
If Not c Is Nothing Then
I have a worksheet with 20+ columns. For this macro, I only need to focus on 4 of them. However, none of these columns are ever in a fixed position so the macro would need to find them by name and NOT by column position. Here they are...
1. Vacation Type (will only have a text value of either "Cold" or "Warm")
2. Vacation Started (will always have a date *x/xx/xxxx)
3. Vacation Ended (sometimes it will have a date '*x/xx/xxxx' and sometimes it will NOT have a date and will be truly blank)
4. Number of Days (currently has ALL truly blank cells)
THIS WHOLE MACRO SHOULD NOT BE CASE SENSITIVE ANYWHERE
Here's what I would like the macro to do...
Scenario 1 - for "Cold" values
Find "Cold" text values in the "Vacation Type" column
"Cold" values WITH a date in the "Vacation Ended" columnIF there IS a date in the "Vacation Ended" column in the same row, put the number of days difference between the "Vacation Started" column and "Vacation Ended" column in the "Number of Days" column.
The amount of days in the "Number of Days" column will determine whether these cells should be highlighted GREY or RED.
A) IF the number of days difference is 7 days or less, highlight the cells in the "Vacation Ended" column and "Number of Days" column RED.
OR..............................
I have got an Excel sheet . When I opened the file the first time I saw a macro, but then I clicked on some other sheets in the VBA and before I got a chance to copy the macro, it disappeared and there is no way I can find it again. I tried to open the file in another computer, but the macro is nowhere to be found. The file has 50 worksheets and ThisWorkBook. On the "Properties" window for ThisWorkBook I can see that there is a password. How can I find again the macro?
View 6 Replies View RelatedExcel 2003. Windows XP Professional. Bank reconciliations. How is it possible in an unprotected worksheet to hide additional data input in formulas so that visible invalid numbers produce accurate results? Displaying hidden formulas in formula bar reveals nothing. Blank cells have been included in formula, but searches for hidden numbers and links in these cells produced nothing. I'm at my wit's end to correct this misuse of Excel in my office.
View 14 Replies View RelatedFor example
Name Address Phone # zip
Danielle 4561
Danielle 9852
Danielle 22
Danielle 69
Joe 895
Joe 28
John 9821
John 1114
John 698
Say I did a search for Joe. I want to report back all the addresses in which he resided but there's no way to tell how many rows of data each person has. Joe has 2 rows, Danielle has 4 rows and John has three. How do I report back all the relevant rows?
I am trying to find a macro that can search a sheet for any cell that contains the text "Not on AOI" selects a range that contains that cell, 81 rows below, and 2000 columns to the right, then cuts the selection and pastes it 162 rows below the original cell where the text was found. What's hard is that the number of columns between the "Not on AOI" cells is variable.
I'm very new to excel macros and the parts I think I've put together are:
Cells.Find("Not on AOI", After:=ActiveCell, LookIn:= _
xlFormulas, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:= _
xlNext, MatchCase:=True).Activate
[Code].....
I have a spreadsheet with various hidden rows and columns that I do not wish the user to have access too as it contains too much detail for their purposes.
Copy/paste and copy/paste special also copies across the hidden columns and rows so what I need to do is to copy it to a new workbook but then remove the hidden rows and columns and just delete the existing formulas in the cells which total the data and insert a new autosum.
I have a table in which the rows represent cities and the columns represent certain characteristics/ attributes a city can have. In the cells every city & attribute pair receives a "grade"
City EatingBeachSki
Barcelona 210
Chamonix 002
I would like to transform this so that every row represents a city & attribute pair and includes its corresponding grade.(I want to do this in order to be able to add more information about city- attribute pairs rather than about cities only)
City AttributeGrade
BarcelonaEating 2
BarcelonaBeach 1
BarcelonaSki 0
ChamonixEating 0
ChamonixBeach 0
ChamonixSki 2
I am aware that I can use a pivot table to sort out all the pairs with a specific grade. and then I could paste this into a new table. But my data base (number of cities x number of attributes) is huge and I was wondering if there is no automatic process to make this transformation.
I have the following macro which I use to transpose a number of columns in one sheet to rows in another sheet.
PHP
Sub task1()Dim i As Integer, n As LongFor i = 5 To Columns.Count Step 2 n = n + 1 With Sheets("Working_Checklist_1").Cells(10, i).Resize(16) Sheets("Summary_Intermediate").Cells(n + 2, "c").Resize(.Columns.Count, .Rows.Count) _ .FormulaArray = "=if(transpose(Working_Checklist_1!" & .Address & ")=0,"""",transpose(Working_Checklist_1!" & .Address & "))" End WithNextEnd Sub
I'd like to change this macro so to transpose from rows to columns. I've tried a couple of things, but can't quite get it to work.
I'd like to transpose every second cell starting from E7 to IV7 in Working_Checklist into column BU in Summary_Intermediate, starting from BU3.
I have mapped data from Sheet1 to Sheet2 and created graphs in Sheet2 using the data. but when I hide the rows in Sheet2 the Graph is being cleared off. Need a solution so as to display the Graph in Sheet2 while hiding the rows in the same sheet.
View 2 Replies View Related
