A few days ago I used the function from a good member here:
=TEXT(B43/B$42;"0,00%")&" ("&RANK(B43;B$43:B$68)&")"
Can I use a function that counts how many times the rank value (1) for example appears in a row.Different row underneath will be OK.
I need to count data from column A to column C
whereas:
Column A - has data but there are data which occur more than once then it will be counted to column C
Reason is I need to delete the data with several occurence at column A so when I see the count at column C then I can be aware how many times the data at Column A occurs so I can delete it by filtering the data.
I have a list and the list contains the same string multiple times. I am trying to take that list and print it in column D and then list in column E the number of times that string appears in column A. S for example I would like the list to output
Col A | Col B| ....| Col D | Col E |
String1__________String1 3
String1__________String2 1
String1__________String3 2
String2
String3
String3
I have been given a spreadsheet to calculate. I think the data is very badly laid out but I cant change it. I have attached a sample from it. The original has 1000 people (accross row 1 in multiple sheets) and has approx 200 rows. I only have to calculate sheets individually.
I need to count all occurences in the row for;
Current Level = 1 and Training Requirement = 1 ( Cell B4)
Current Level = 1 and Training Requirement = 2 (Cell C4)
etc for all Currant Level 1-4 and Training Requirement 1-3.
I have been looking over how to use Sumproduct but I don@t see how to use it here.
I have tried to compose a formula that looks at the value in cell A1 and compares it against the number of occurrences in the range of column D. I can do this:
View 8 Replies View Relatedi am trying to get totals from data and am using 2 different times to count from (eg. i am trying to find how many cells contain times in the 6:00 am to 2:30 pm range in the same column...I can't seem to be able to count these correct.
View 5 Replies View RelatedI have columns of data that can be filtered. My problem is that I'm unable to count the occurences of numbers once I apply a filter.
I know how to use Countif & Subtotal etc, but I don't know how to count occurences of numbers and see the results relating only to those visible numbers after applying the filter.
For example, say I have the following numbers in a column...
2, 0, 6, 1, 0, 3, 2, 4, 1, 5, 1, 0, 4
I then apply a custom filer selecting =4. My answer would be 2 (as there are TWO occurences of the number 4).
Does anyone know how, to count the same text, but on occasions?
So basically, I mean, if the letter 'S' was in 10 cells, but on 3 different occasions (meaning the cells aren't one after the other), how do I count the fist 'S' of each occasion it appears?
the attached spreadsheet is designed to record the number of days off workers have in a week. The drop down menu gives you choices to record the reason why a worker is absent but what I can’t do is total the number of days absent in a week as its words used to describe the absence and not numbers. If any one could assist me to total the days. I have attached an example which should explain the problem in a clearer manner.
View 3 Replies View RelatedI've been tying to get the vlookup function to not stop when it finds the 1st occurence and actually find all the occurences in that collumn and then sum them together, can this be done? Or by using a different function? Example......
So when vlookup looks for blue it should return 5 which is sum of 1 + 4 rather than stop when it finds 1.
I am after the formula to count the occurrence of, for instance the word 'the' in a sentence/paragraph that is contained in Cell A1. Cell B1 should return the quantity of times the word 'the' has been found in Cell A1.
View 6 Replies View RelatedI have provided an attachment. what I am trying to accomplish. I am trying to have a worksheet that if I input multiple 3 number combinations into the input cell range, after pressing the sort button, it would then sort, rank and count each 3 number combination for me. So as my attached file illustrates, the input cells would be A9:D14. In this sample the ranking consists of cells A19 - A31 as the ranking columns. Cells F19 - F31 show the counted and sorted results and are ranked accordingly. I need a sort button as illustrated in cell F10 to make the worksheet function after the 3number combinations are inputted in cells A9:D14. How do I get started to make this work? I do not know VBA codes or macros so I will need guidance along the way if this is what is needed. I do have some working knowledge of formulas (e.g. countif, rank, etc.)
View 8 Replies View RelatedI have a spreadsheet of raw data organised in columns and rows. one of my columns is called SERVERNAME, and each row contains the data about an incident which is related to that server.
What I need to be able to do is to firstly calculate via a formula (cannot be a pivot table) the number of instances of SERVER X, and then I need to be able to rank the top 10 servers for which records have been logged.
As an example here is some raw data:
INCIDENT
SERVERNAME
LOCATION
OS
OWNER
0001
Server 1
Japan
Windows 2008
KERLEJ
[Code] ........
Based on the above data I would like to have an Excel formula that searches through the records (Rows) and determined that there are the following number of instances of servers:
server 1 2
server 2 1
server 3 3
And then a further formula (again I cannot use pivot table) to calculate the ranking:
Server 3 3 - ranked first
server 1 2 - ranked second
server 2 1 -space ranked third
I know I can go about this using a pivot table, but I would rather not. However, if it really is the best solution, then I’ll go that route.
************************************************************************>Microsoft Excel - School Cases - Assigned.xls___Running: xl2002 XP : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1=ABCDEFGHIJ1Case NumberOpened DateClosed DateAccount NameCase ReasonStatusSpecific issueOpenClosedAge (Days)2243301/02/0801/02/08Vincennes UniversityDisbursingClosedDisbursing Agent Process Issue0103243801/02/0801/02/08The Culinary Institute of AmericaDisbursingClosed-0104244801/02/0801/02/08Southern Methodist UniversityCertificationClosed-0105245101/02/0801/04/08Regent UniversityProcessingClosed-0126246001/03/0801/03/08Vincennes UniversityDisbursingClosedReturned Funds0107246901/03/0801/04/08Pennsylvania State University (The)DisbursingClosed-0118247001/03/0801/14/08Vincennes UniversityCertificationClosedAccount Issue01119247701/03/0801/04/08Michigan State UniversityDisbursingClosedLoan Level-Change amount01110249701/04/0801/04/08Illinois Institute of Technology - Main CampusProcessingClosedRequest for loan status change01011249801/04/0801/04/08Southern Methodist UniversityCertificationClosedDidn't receive01012251101/04/0801/07/08Rutgers UniversityDisbursingClosedLoan-Level Change date01313251301/04/0801/04/08Capella UniversityDisbursingClosed-01014251401/04/0801/07/08Saint Johns UniversityDisbursingClosedLoan-Level Change date01315251501/04/0801/07/08Regent UniversityDisbursingClosedLoan-Level Change date01316253301/07/0801/07/08Purdue UniversityDisbursingClosedLoan Level Check Status01017254301/07/0801/15/08Saint Johns UniversityProcessingClosed-01818254701/07/0801/08/08Saint Johns UniversityProcessingClosedRequest for loan status change01119256401/07/0801/18/08Clark Atlanta UniversityProfileClosedReceived revision to profile011120258101/08/0801/08/08Saint Johns UniversityDisbursingClosedLoan Level-Change amount010Jan [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
What I basically need it to do is count the number of times a school is listed in column D then rank the top ten.
I have attached an excel 2010 spreadsheet to show the issue.
I was shown a formula to rank a series of numbers =RANK(A2,$A$2:$A$19775,0).
However, the ranking figure that get's generated, appears to be counting the cells or something like that.
Ranking Example.xlsx‎
I would like to have the duplicate numbers in position one ( cell D9:D18), position two (cell E9:E18) and position three (cell F9:18) all counted and then ranked based upon date range in column A.
The number order of precendence is 0-9 with zero being the lowest.
Column (I9:I18) counts the duplicates, draws and no draws of digits 0-9. Column (J9:J18) converts results from column I9:18 into a percent.
I need to add a sort button at the bottom of position 1 (columns H & I 22), position 2 (columns L & M 22) and position 3 (columns P & Q 22)
When the sort button is selected it will sort the data by # of repeats, draws, and no draws as illustrated in (columns I, M & Q) or sort data by Position number from 0-9 as illustrated in (columns H) which will then show data of repeats and percentages out of rank order, because it is in order of number precedence.
Last but not least a graphic bar chart that shows the results ranked highest to lowest from when the sort button is selected with the number at the top of the bar colored black. Bar graph colors to be: top 3 red, middle 4 yellow and bottom 3 blue. This should show a vertical cascade effect.
I'm trying to Rank a list and than re-rank the list while excluding certain (or by Criteria) items
Vendor Co
Cost Fee
Rank
Vertox
500
4
BV
1520
3
[code].....
In sheet 10 there is a list of hunderd of names with information. The information is download several times a week and is not sorted in any way
Column A - Name of sales agent
Column B - Property Name
Tabs 1-9 represent all the different sales reps
Here is what I want to do (I realize I can sort the data and copy paste but it is pain):
Tab 1
Cell A1 - "John Smith"
Cells A2-A50 I want to list the names of the properties in column B of sheet 10.
Cell A2 would find the first occurence of "John Smith" in column A of Sheet 10 and put in the data from column B.
Cell A3 would find the second occurence of John Smith in column A of Sheet 10 and put in the data from column B
Cell A4-A50 would find occurences 3-50
I'm putting together a database in Excel and there is a particular item that I am having trouble with. I need to count the frequency of occurences in between events over a series of cells.
This:
ABBBAABBAB
Needs to be tracked like this:
ABABAB132211
Basically I need to write it so that when A occurs it counts how many times B occurs immediately after, until the next A. Once that is figured out I should be ok counting double A occurences.
how to count unique Occurneces in Excel?
For example: -
What formula can I use to count the Unique Occurences non - zero values in Column 2 for the letters in Column 1?
Column 1 Column 2
A 1
A 1
A 1
B 0
C 2
C 2
D -1
I have a list with several stocks tickers and the respective quantities and prices on three columns: example below. I wanted a formula to list all different occurrences of each stock only once. Later on I would consolidate all trades.
stock / price / quant / expected list
A / 10 / 1000 / A
B / 20 / -2000 / B
C / 25 / 500 / C
D / 30 / 2000 / D
E / 15 / -2000 / E
B / 20.5 / 1500
A / 10.2 / 1200
D / 29 / -500
C / 25 / 800
E / 16 / 2000
how many dates appear in a column. I have a spreadsheet wherein when a name is encoded in column A, the date is automatically logged in column B. Now, i need to count how many of those dates occurred in column B.
For the month of May - how many 1 May 2007, 2 May 2007...an so on.
After that - i need to match those dates to the name of the encoder and a another encoded status. It's like - 1 May 2007+john+approved = 1 occurence. I need to count them separately and combined.
I am using a code to validate that a person enters only an email address in a certain cell. I would like to confirm that the address has only two occurences of ".", and of course one occurence of "@". What would be the easiet method to do this.
View 9 Replies View RelatedI'm trying to formulate something that will count how many times say 5 comes up in a =randbetween(1,20) function. Of course if I do =(IF(A1=5,1,"") it will count it, but once the randbetween recalculates it will reset. Is there any way to do this so it keeps a cumulative count?
View 9 Replies View RelatedI have and interesting delimma and I have been spending way too much time trying to figure this out.
I have a value in column B "Agreement". I have data in column C which could be just about anything. I need to be able to find "Agreement" copy the value immediately above it and paste it next to the value in column C.
You see this gets difficult for me, because there are many spaces in the spreadsheet and there may or may not be a value in C.
Here is an Example: I need for the value above "Agreement" to bel placed in the same column where there is a value in C? Clear as mud. I need this for every occurence of "Agreement" in this column. There are many occurences of "Agreement"
how to write a search and replace macro, but instead of writing:
Cells.Replace "OldText", "NewText"
how to independently read this "search" text into a string (hopefully a string that can handle 'more' than 255 characters per cell, even in Excel 2000) then replacing that search text("OldText") with ("NewText") step-by-step?
("OldText" can appear multiple times in one cell)
I'd like to evaluate a series of columns where a value greater than 1 would return all matches in another worksheet. I can't seem to use LOOKUP or Pivot Tables effectively to do this.
For example
Task Week1 Week2 Week3
task1 5 8
task2 6 10
task3 5
I'd like to create a view that would show Week1 having one task (task1) that will take 5 (hours). Week2 should show task1 and task2, Week3 should show task2 and task3
I am trying to get this code to loop through a dynamic range on one sheet and copy all occurences of a name (John Doe) to be copied into another sheet in a single column, but a new row for each occurence of the name.
I believe the problem is in looping the findnext statement,
Sub find_actor()
' Keyboard Shortcut: Ctrl+Shift+A
Application. ScreenUpdating = False
Dim random As Range
Dim connector As Range
Dim paste_connector As Range
Set random = Sheets("database").Range("C2")
I have a row containing:
Date entered
Name
Date of Birth (DOB)
Occurrences of Name + DOB this Month
Occurrences of Name + DOB within last 3 Months
Occurrences of Name + DOB within last 6 Months
I can manage the occurrences this month but haven't a clue how to calculate the 3 and 6 months ones. I have attached a sheet.
I need to know what driver led a given lap of a given race (Col. G). Attached is my attempt. Something to consider is I need a formula that can be pasted down Column G as from track to track, from race to race the # of laps will not be the same. The number of drivers that led a given race will not be the same.
I have an array formula in cells of Column G for the # of laps in a given race (i.e. if a race was 100 laps it would go from G3-G100). I ran it down to 500 just to cover myself.
Column G: { =INDEX($E$3:$E$500, MATCH($F3,VALUE(LEFT($D$3:$D$500,FIND(" ",$D$3:$D$500)-1)),1))}
…it kinda works, but for some reason when it comes to lap 251 it gives me a #N/A error. It gives me the correct driver for lap 250 & 252 and all other laps but not lap 251. Also, a minor inconvenience is that I have to put a space after the first number & if at all possible I don’t want to have to do that.
I would love a macro where all I need to do is paste Column A, press a command button, & the macro does everything for me but that’s probably asking a lot. I know how to record a macro but don’t know anything about VB.
Column D & F have to be formatted as text. It has to be text format or when I cut Column B to Column D it changes some numbers to date (i.e. 1-2 becomes January 2nd).
Column B:
=RIGHT(A3,LEN(A3)-FIND("*",SUBSTITUTE(A3," ","*",LEN(A3)-LEN(SUBSTITUTE(A3," ","")))))
Column C:
=LEFT(A3,(LEN(A3)-LEN((RIGHT(A3,LEN(A3)-FIND("*",SUBSTITUTE(A3," ","*",LEN(A3)-LEN(SUBSTITUTE(A3," ",""))))))))-1)[/size]