Find Values & Copy All Occurences To Relative Worksheet
Dec 3, 2007
how to write a vb code to do the following actions with an excel sheet, which contains a dump from SAP. This dump usually consists of anywhere between 25 to 30 columns and about 20000 to 30000 rows…
1. Find all rows which contain “VN” and place it into the sheet Vendor Charges (which already exists). Which could be in any column
2.Find all rows which contain “MT” and place it into the sheet Material Charges (which already exists).
I have attached the excel sheet to better explain what I had in mind. ‘sheet1’ contains the raw data from SAP but, the number of columns varies every time so it cannot be directly sorted by selecting the column. I tried recording a macro but, as I don’t have a constant sheet to work with each time the macro obviously doesn’t work.
I have and interesting delimma and I have been spending way too much time trying to figure this out.
I have a value in column B "Agreement". I have data in column C which could be just about anything. I need to be able to find "Agreement" copy the value immediately above it and paste it next to the value in column C.
You see this gets difficult for me, because there are many spaces in the spreadsheet and there may or may not be a value in C.
Here is an Example: I need for the value above "Agreement" to bel placed in the same column where there is a value in C? Clear as mud. I need this for every occurence of "Agreement" in this column. There are many occurences of "Agreement"
The code is supposed to find HEQL in column G in BOOKED.XLS ( attached) and then do a series of copy pastes into two other workbooks. For some reason, it is only finding one instance of HEQL and there should be 255.
I'd like to be able to create a copy of a worksheet and maintain the relative hyperlinks within each worksheet. Currently, when I copy a worksheet, the hyperlink takes me back to the original worksheet.
On the worksheet, I need to find wherever the cell value begins '2 X 4 ...' in column L, and then replace the cell value in the same row, in column K, with '113010'. In my attempts, my code just changes the first occurrence, not all occurrences.
I want to use VBA to do this.
Here's my code so far:
Sub Update_Product_IDs()
Application. ScreenUpdating = False Dim i As Integer, iCount As Integer Dim numberOfPMDs As Integer Dim PMD_Name As Integer Dim worksheetName As String Dim worksheets_in_file As Integer worksheets_in_file = Worksheets.Count worksheetName = Worksheets(2).Name numberOfPMDs = worksheets_in_file - 1
I want to be able to search all of column A for the string "UNAUTH O/D FEE £20.00" and when it is found, add £20 to column B, and 01/01/00 into column D of the same row.
Sub feedate()
Set rd = Sheets("fees")
z = 20 x = 1 / 1 / 6
For i = 1 To rd. Range("A65536").End(xlUp).Row If UCase(Cells(i, 1)) = "UNAUTH O/D FEE £20.00" Then Cells(i, 2).Value = z Cells(i, 3).Value = x End If Next i End Sub
I am trying to get this code to loop through a dynamic range on one sheet and copy all occurences of a name (John Doe) to be copied into another sheet in a single column, but a new row for each occurence of the name.
I believe the problem is in looping the findnext statement,
Sub find_actor()
' Keyboard Shortcut: Ctrl+Shift+A
Application. ScreenUpdating = False
Dim random As Range Dim connector As Range Dim paste_connector As Range
Each Worksheet has a unique identifying label - "Requirement Number"
Within each worksheet is free form text data of the following categories:
Requirement: 10358 Title: Customer requirement 1 Text: This describes the requirements for a product for the customer[code].....
The text of the categories may begin in column A or B
What I need is a macro that will search each worksheet for a category, e.g., "Configuration:", copy the row where the keyword "Configuration" is found, and then have that row transposed and pasted to another WorkSheet (e.g., "Extracted Data") cell.
Data extracted from the next Worksheet would begin a new row in "Extracted Data"
Example: Requirement1 Title Text Verification Method-Level ... Requirement2 Title Text Verification Method-Level ... Requirement3 Title Text Verification Method-Level ...
The Requirement# is best extracted from the WorkSheet tab since some of the worksheets are missing this information. I can provide an example spreadsheet, however, I was not able to figure out how do that in this post.
I found a thread similar to this problem:
find and copy row
However, it only finds, copies and pastes for one keyword.
Starting with one worksheet with end date as one of the columns. I filtered the worksheet with end date > (certain date) and copied the results to a second work sheet.
The original worksheet has all courses with end dates from 1998 to 2009. The second worksheet has all courses with end dates > 2004.
How do I find out which courses have end < 2004. But do not also have an end date > 2004.
What I am trying to do is determine which courses are not longer being used since 2004.
i have a spreadsheet that contains a column for each day and i need to input the count from another tab for certain data...example as follows:
column A shows types of fruit - apples, bananas or oranges, row 1 contains the date (todays date, weekdays only) - the count of each fruit needs to be entered in rows 2 (apples), 3 (bananas) & 4 (oranges) for each fruit for each date
i copy and paste a daily report into a new tab in this workbook -Raw Data (the data is always in the same format and the info i need is in column J...."555" = apples, "666" = bananas & 777" = oranges)
i have used the below formula which works:
apples =COUNTIF('Raw Data'!$J$5:$J$65536,"555") etc
however the daily report that is pasted into the Raw Data tab only relates to the current day (date is present in this tab in A1)...how do i get each daily column to only display a count if the date in row 1 matches the date in Raw Data tab A1?
also how do i keep the previous days' data to keep what the count was for that day (instead of counting the current count of the new data only relevent for today)?
I have a base document that i can import another data document with a button (this is working).
I then have another WS ("search") in the base document with lots of identifiers which I want to use as my search range to look through the document that I just imported (column A).
I need a msg to ask the user what month they would like to find the $ value on (Ie, January) in the imported WS... this way it doesnt copy the entire line only cell in the selected month column.
Then I want to the user to be able to click a button that will check through the identifiers on the "search" WS and if the same identifier appears in the imported WS in column A, then for the $ value in the column selected to be copied to the search Range work sheet.
If the idenfifier is not matched then in place of the $ value copied can be the string "no in XXX WS" .
I have attached the document with dummy data in each work sheet with details more cleary what I have meantion above.
The following macro does what it is designed to do and needs to be run from a control sheet called "Guide". When I run it from this Guide sheet it stops at around row 53 (out of 1400 rows) on each of the specified sheets in the macro. I have struggled with this problem and have now discovered that the macro will run correctly when run from one of the worksheets specified in the array, e.g. sheet "200 and 100".
Sub Calculateclosingtrades1() Dim r As Long, c As Integer, LastRow As Long, rcheck As Long LastRow = Range("J65536").End(xlUp).Row Dim shtTemp As Worksheet Dim vntName As Variant
For Each vntName In Array("200 and 100", "100 and 50", "50 and 25", "40 and 20", "20 and 10", "15 and 10", "18 and 9", "200 only", "100 only", "50 only", "40 only", "25 only", "20 only", "15 only").............
I can't seem to get the findnext to work. I can find the first instance but none after that. Here's my code.
Dim B As Range Dim SheetNumb As Integer SheetNumb = 1 Do While SheetNumb <= Sheets.Count Sheets(SheetNumb).Select If ActiveSheet.Name = "Page1" Then Exit Do End If Set B = Sheets(SheetNumb).Cells.Find(" Mechanical", SearchOrder:=xlByColumns, LookIn:=xlValues) If Not B Is Nothing Then B.Activate FindAddress = B.Address Do B = Sheets(SheetNumb).Cells.FindNext(B) Loop While Not B Is Nothing And B.Address <> FindAddress End If SheetNumb = SheetNumb + 1 Loop
Attempting to find identical values in cells B3 & B4 located in another worksheet titled "Density Chart" and to return the value in cell/column D.
The Density Chart values are located in column A & B and the value I want returned, depending on the criteria entered would be found on the same row but in column D.
Example...
Changeable Value in B3 = A123 (can also be completely alpha value and will be different values each time the formula is used. Changeable Value in B4 = 2.00 (always numeric value)
I copy information from one worksheet to another. Now i specify the range to copy in the macro. What i need is for the macro to find the end (last row) of data and than copy everything from row 5 to last row.
The below is a macro i currently use:
Sub Import_FNGC() Const TARGET_FILENAME = "2008.xls" ' ' import_FNGC Macro ' Macro recorded 1/30/2008 by wwrobel '
' myMSG = "This will clear the data and import information. Do you want to continue?" Response = MsgBox(myMSG, vbExclamation + vbYesNo, myTitle) Select Case Response Case Is = vbYes Range("A5:BM100").Select............
I would simply like a Macro to 'find' or search keyword data in a spreadsheet and copy the chosen rows and past them into a new excel sheet. I want to be able to do that as many time as I need, currently I have the following code, it does not seem to work well for me, I can only use it to search one time, cause an error after that
Sub FindIt() Dim rngWB As Range, c As Range Dim strFind As String, firstAddress As String Dim wsCount As Integer, ws As Integer Dim rw As Long strFind = Application.InputBox("Type in the name you wish to find.", "FindIt", Type:=2) Application. ScreenUpdating = False Worksheets.Add(After:=Worksheets(Worksheets.Count)).Name = "Blank" Sheets(1).Select...................................
I am working with data that is to be used for a regression analysis, and I am having trouble being able to find and replace multiple observations.
For example, column A has the two-letter abbreviation for each country in the world. Column B has the name of the corresponding country. At various places throughout the worksheet, names of countries exist.
I would like to find all instances of say "Albania" and replace them with "AL" then Algeria, Angola, Andorra, etc. Since columns A & B are in alphabetical order and the abbreviation and name correspond with one another, I would like to use a macro that will find all occurrences of the country name in the selected cell and replace them with the abbreviation then repeat the operation.
So, I need to: 1) Find all occurrences of the content in "B1" 2) Replace them with the content in "A1" 3) Repeat operation beginning at "B2"
I'm looking for a "best of breed" technique to make charts automatically reference data selections on the current worksheet. While I can manually key in a substitute name to reference the new worksheet, this is tedious. The chart "Edit Series" dialogue window refuses to accept a reference that doesn't include the current sheet name.Does anyone know if there is a "relative cell reference" SYNTAX that works with "select data" ranges when defining chart series?Or can someone suggest a macro that can be used to modify multiple chart references to point to current sheet, since the standard " Find and Replace" doesn't seem to interrogate the contents of charts.
Additional problem description detail:
I'm creating numerous custom charts in a " boilerplate" worksheet, each chart references adjacent data. Is there some way to make these charts reference the "current sheet" automatically when my "TEMPLATE" worksheet is copied to a new worksheet? Whenever I copy the boilerplate worksheet, the series definitions continue to point to the abolute name of the original worksheet: =TEMPLATE!$GD$398 While I can modify references manually (e.g. edit to =NEWSHEET!$GD$398), this is time consuming.
I have three parameters that users on my spreadsheet will be using. They will be searching using the 'Brand', 'MPAN' and 'Tariff' fields.I would like to have drop down menu's for then to select the correct search option. I then have another sheet within the same workbook with all the data in it with columns headed of Brand', 'MPAN' and 'Tariff'. It has to be an excat match using those three parameters though. I would like the parameters the user selects on the first sheet to be searched and found on the second sheet, with the figures in the cells next to the search result getting fed back into a set cells back on the first page.
I have a workbook with 50 worksheets, each worksheet has an Alpha name (ie names of people). Rather than write some code to go through each worksheet to create a report, is it possible to write a formula in a "Reports" worksheet that reads something like
=worksheet10!f2
where worksheet10! is the number of the worksheet (as seen in the VBA project window) while the name is "Billy".
I am trying to locate specific values in column a of a spreadsheet and I want to be able to move (cut and paste, offset, ???) only those values to column c of the same row. The values I am looking for are text and they all begin <@29>, <@33>, etc. (pagemaker codes). I want to move the cells with the pagemaker codes to column c. and leave the other ones in column a. Does anybody know how to do this using vba? Below is a sample of my column a.
Here's what I need to do. I need to search 3 huge columns from multiple workbooks and copy all values > 0 onto 1 Worksheet in a completely new workbook.
I've done a search and this was the closest I've found to what I need: Find, copy, paste to diffrent sheet
But I couldn't get it to work.
Here's where I am:
For iteration = 1 To numFiles 'blah blah blah get filenames 'filename of new workbook = outputFileName 'worksheet name in new workbook = Cumulative Record Data 'filename of data workbook = dataFileName 'worksheet name in data workbook = Record
The error code I get is Run-time error '1004' - Application defined or object-defined error on line
I am building a Macro which can be found underneath. The red code is not working right now and I am looking for alternatives to solve this error but until now I haven't found none.
Basically, I am looking for a correct code to copy files from a sheet to another sheet with a find macro.
Sub vinden() Dim FindString As String Dim Rng As Range FindString = Range("A21") If Trim(FindString) <> "" Then With Sheets("Voorraadverloop").Range("A1:IV65536")
In column A I have a set of Ids that are not unique. In column B I have a set of latlong values for those Ids in column A. In column D I have the unique list of Ids from column A(Removed duplicates from column A & pasted them in column D). In column E, I need the latlong value which has highest frequency for each Id. I tried countif,Frequency and tried mixing them up with various other formulas but it is out of my reach.
I am currently working on a project where i am given a sheet that typically has several hundred rows of data and not seemingly organized in any manner. This document has 6 columns, and my main focus is a range of dates (in MMM-YYYY form) from around early 2000 to now that can have duplicates. The dates(Column C), have corresponding Usages (Column D), and Costs (Column F) and I need to add these values together and remove the duplicate months so I only have one Usage and one cost Per month.
My spreadsheet has 6 Columns of data, and varying number of rows. Currently, since I receive the numbers in an unorganized fashion, my macro organizes the data into a table and then sorts the table be date so I have the oldest dates first and the duplicates are adjacent. There may be varying numbers of duplicates, though typically 0 to 4.
I want to find the subtotal amount on one worksheet, which is two columns over from the text, "Sub Total:" on the same row. The subtotal line floats up and down each week. Once I can find the subtotal I want to populate another worksheet with the data.
I want to set range a entire column,the rows are dynamic and i want to do it on all the columns in the sheet, my problem is that after i set the range(i hope i did good) i want to do a average of the range and to put the result in a new sheet on a row. I'm sorry for the mess in the code its one of my first macros
Option Explicit Sub Average() Dim R As Integer Dim help As String Dim Range1 As Range Dim E As Integer Dim Avg As Integer R = 1 '/////CREATE NEW SHEET AND COPY THE FIRST TWO ROWS TO THE NEW ONE Sheets("UXP data").Select 'Sheets.Add Sheets("UXP data").Select......................
