# Find Value And Return Row Number

Feb 25, 2008I'm trying to do in vba is search for a number and then return what the row number is for that number.

View 4 RepliesI'm trying to do in vba is search for a number and then return what the row number is for that number.

View 4 RepliesADVERTISEMENT

Items in Column A1 are calculated by (B2/4+5)*1.4 Items located under the columns 2000, 3000, 4000, etc... 10,000 are calculated by taking the top number, eg 2000/(A1 cell value)+the column B number. 2000/7+0 = 286 (rounded numbers)

I need to find an way to look up for x number (2000,3000,4000, etc...) find the smallest number in that column and then return the value in column A1.

Cell

A1 Number >2000300040005000600070008000900010000

70 2864295717148571000114312861429

84 24236148059971883795610751194

[Code].....

I'm using the LOOKUP function to find the largest number and then return the name from a different column, it looks like this:

=LOOKUP(LARGE(round1!$F$2:$F$65,1),round1!$A$2:$A$65)

but all I get is hashN/A?

I am working with data where I need to extract a 10-digit number from a string. Where the 10-digit number is in the string varies, so I can't use a simple left/len combination. Here's an example below:

Something and email@me.com 1234567890 stuff thingsThe formula I am using now is this:

=MID(F4,MIN(FIND({0,1,2,3,4,5,6,7,8,9},F4&"0123456789")),10)

This finds the first number in a string and returns that number and the next 9 digits for a total of a 10-digit string (so it would return 1234567890). However, I run into an issue when I have a string that has numbers in the email address.

So this:

number in email123@me.com 1234567890 exampleWould return this:

123@me.comIs there a way to modify the formula above so that it searches for 10 consecutive numbers and not just the first number in a string?

I have a worksheet with about 20 columns of info. First of which is a primary key. Call it "Job Number." I would like to create a macro that runs down the list of primary keys searching for a specific Job Number I ask for in the new worksheet, in A1. It then copies and pastes the entire row where it found that job number into the new worksheet starting at row 6.

View 7 Replies View Relatedi got worksheet which i store a list of all filing number in the same Col "R"

The combination of Filing Number Example

1) Invoice Filing Number = Inv2014070001 and continual

2) Purchase Order Filing Number = POD2014070001 and continual

3) Sublet Filing Number = SLT2014070001 and continual

Currently i am using a code which it can find the last filing number return to my userform textbox and increase the last number by 1. but this code can only return the very last filing number.

i need to find all the missing filing number in between all the filing number in Col R and return it to my userform listbox

VB:

If me.Remark.Value = "Sales" Then A = "Inv"

If me.Remark.Value = "Purchase" Then A = "POD"

If me.Remark.Value = "Sublet" Then A = "SLT"

Y = Me.TransYear.Value

myName = UCase(A & Y)

[Code]...

I'm writing a macro that will import data from one workbook to another, based on yesterdays date. I have the import functionality working, and I've been playing all afternoon, but I can't find a way to find yesterdays date in a range and use that row number as the row offset value in this line:

Rather than having a set row offset value (in this case, 14) I would like to use the find function to lookup yesterdays date in range "B50:B80" in the worksheet I've designated as "sh1" and return the row number of the cell that has yesterdays date and use this value as the row offset value, replacing the hard coded 14 that is in there currently. The date values in the range are formatted as per Date Format.jpg.

I have more than 1000000 coordinates with heights to sort through. The aim is to be able to give a specific radius and check all coordinates within this radius if the slope is more than a maximum slope. If this is the case it need to put the value (in this case) 100 in a new column. The reason for this is we have a reasonable flat terrain but the entire area is filled with Anthills. I need to sort the data. Normal ground points (No Anthills) should be labelled/coded as 200 and anthills as 100. This will allow my program to know the difference between the ground and anthills. In the tab "Input Sheet" I have a small portion of co-ordinates starting from row 8 to row 53 (this will have to extend all the way down to the last row in excel). I need to copy each row starting with row 8 (C8:E8) and paste it in row 2 (C2:E2). Column H indicates if the points are forming an anthill and the code needs to change. I have my final answer in the tab "Final Answer" that I require for my program. Is there any way I can write a VBA code that will check all the point instead of doing it manually.

View 4 Replies View RelatedI am trying to create a formula for a work report and I am afraid I am a bit of a novice with the more complex formulas. Here is what I am trying to do: Sheet 1 has Sales order numbers that duplicate based on the sales lines. Sheet 2 has single lines of sales order numbers and their assigned PO number. I would like to have Sheet 3 where it combines all data and duplicates and fills in the PO number to match all of the sales order numbers that repeat on the other sheet. I hope this makes sense. I can't seem to figure out if I need a VLookup or If or Match formula (or all of the above).

View 1 Replies View RelatedI have two spreadsheets.

spreadsheet 1:

Lookup from Order numbers listed from A5:A177.

requested formula in I5: I would like a lookup to sheet 2 based on the order number (F19:F191), to return the cell above the first non-blank value.

spreadsheet 2:

Lookup value:Order number listed from F19:F191.

Data search:AY19:CI191

return the (date) which is in the range above the data search from row AY18:CI18.

I've had a look at few forums but i'm getting mixed responses, having to use index / match / lookup / min / --.

I've created a userform that has one ComboBox (ComboBox1) and two text fields. I am trying to get the userform to return information to my worksheet in the same row as the name that is displayed in the ComboBox. This is my VBA code.

Private Sub Cmdpayment_Click()

Dim iRow As Long

Dim ws As Worksheet

Set ws = Sheet4

iRow = Cells. Find(What:=Me.ComboBox1.Value, After:=C5, LookIn:=xlFormulas, LookAt _

:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _

False, SearchFormat:=False).Activate

ws.Cells(iRow, 12).Value = Me.txtpdate.Value

ws.Cells(iRow, 13).Value = Me.txtpayment.Value

Me.txtpdate.Value = ""

Me.txtpayment.Value = ""

End Sub

I have the following text

BKG 4.0 CL G 3210x2550 LS 28 PKGL NE

BKG 6.0 CL G 3210x2250 LS 25 PKGL NE

FAB 6.0 AB G 3300x2440 LS 16

FOP 4.0 BZ G 3210x2250 LS 28

FWH10.0 WH L 3210x2550 LS 9

I need a formula which searches within the text to find "LS" and then to return the number after it, this would be either 1 or two digits.

I am thinking if there was a forma that searched for "LS " (Note the space) and then returned the next two digits from the left from the found search ("LS ". I have attached a spreadsheet.

Have problems using find and the Dictionary

What Im trying to do is find a certain word in a string then return the number associated with that word

Is there a way with the following formula to tell it that if value return is = to value of cell above then find return next value?

View 6 Replies View Relatedi have 2 sheets one called "IS" and the other called "AS" in cell a2 of "IS" is a number that i need to have excel look up in column a of "AS" once it find that number i need it to return the number thats in column e of that row to sheet "IS"column d. summary: a2 of "IS" looked up on sheet "AS" and returns the number in column e to cell d2 of "IS"

View 3 Replies View RelatedI am trying to write a formula, I have 6 sets of criteria with a lower and higher range, if the number falls within the criteria I would like it to return the Alpha number,

eg, 104, will return D

MinMaxReturn030A3160B6190C91150D151240E241360F

[Code] ......

How to create a formula in cell M2 that looks at the second row of numbers (0 and 500s) and tells me the rightmost value that is greater than zero. In this example it would return 12.

Second Question: Is there a way to return any counted value, for example the second-to-last number that is over 0?

I need this for a tracking sheet of scores. For example, 1 gets 100 points, 2 gets 90 points, 3 gets 80 points, etc. I need to set it up for 10 places. I have no idea and have fiddled with it for two hours now. I need to be able to put a 1 in the cell and 100 appears after I hit enter, etc.

View 5 Replies View RelatedI have a large amount of data and I'm trying to count how many unique values I have in one column. I also want to know how many times each duplicate appears. I tried using a pivot table but it's not working for me.

I also tried the following formula: =SUM(IF(FREQUENCY(H:H,H:H)>0,1)) but it's not quite working.

I have attached an example. If I have a set of numbers such as the one attached, is it possible to create a formula that will show me all the combinations of numbers that add up to 55.52? In the attached I have highlighted in different colours all the number combinations that add up to 55.52. The numbers highlighted in blue appear within more then one combination. Is there a formula that can do this for me, instead of randomly adding numbers hoping they add up to 55.52.

View 1 Replies View RelatedI have attached an example. If I have a set of numbers such as the one attached, is it possible to create a formula that will show me all the combinations of numbers that add up to 55.52? In the attached I have highlighted in different colours all the number combinations that add up to 55.52. The numbers highlighted in blue appear within more then one combination. Is there a formula that can do this for me, instead of randomly adding numbers hoping they add up to 55.52.

examples.xlsxâ€Ž

I need a VBA code to find the nearest biggest number and nearest lowest number between the data of D2 to H2. In the attached file, I have mentioned my required output (Column A and B - blue highlighted)

View 2 Replies View Relatedto update these values via a form in this sheet. I can find the correct row to be edited by entering a value from column A and B. The problem is if I want display the values of that row first and then change it. If I want to change row 10 data how can I bring back the value in ROW 3 AND THE COLUMN VALUE? The next step would be to do the actual update if I want to change ROW 10 to "Ooi" and a sales value of 200?

This is what I have done so far:

Dim myRows As Integer

With Sheets("Mrt")

'Retrieve history information for row

For myRows = 4 To 49

If comboxDay.Text = Range("A" & myRows).Value And textboxdescription.Text = Range("B" & myRows).Value Then

textboxbedrag.Text = Range("C" & myRows).Value

chkBTW_Ja.Value = Range("D" & myRows).Value

txtNota.Text = Range("S" & myRows).Value

End If

Next

End With

Picture attached to show how sheet looks like.

I need find the date 1/1/2014 in Row A and from the same colum get the average from row B:z.

View 1 Replies View RelatedI have a huge data base (daily temperatures dating back to 1872), but for simplicity I have limited the values to just a month for this question. What I want to do it list the ten warmest temperatures and then return the date in which it occurred. I am using the following LARGE function to get the ten warmest temperatures (Column B - high temperatures).

=LARGE($B$2:$B$31,$D2)

Column B = High Temp in Data Table

Column D = Rank in Results Table

This works great. However when I use the following Index function to get the date in which it occurred (Column A - Date), it keeps returning the first date in which it occurred when there are multiple occurrences of the same temperature.

=INDEX($A$2:$A$31,MATCH(LARGE($B$2:$B$31,$D2),$B$2:$B$31,0))

Column A = Date in Data Table

Column B = High Temp in Data Table

Column D = Rank in Results Table

In some cases, I have more than 2 occurrences of the same temperatures. For example, the high temperature of 23 degrees occurs 3 times during the month (1/4/2013, 1/11/2013, and 1/12/2013), but only the first one 1/4/2013 shows up in my results table. I would like the other dates to show up. These tables are listed below.

Data TableResults Table

DateHigh TempRankHigh TempDate

1/2/201311271/5/2013

[Code].....

I have a bunch of domain names (including subdomains) in column B

In column A i need just the raw domain name...

example

a1 [domain.com]

b1 [domain.com]

a2 [domain.com]

b2 [mail.domain.com]

a3 [domain.com]

b3 [subdomain.domain.com]

I need a formula to put into cell B19 to Find X in the corresponding row and to return the header value

******** ******************** ************************************************************************>Microsoft Excel - Book2___Running: 11.0 : OS = Windows .NET Server (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1=ABCDEF1Part NumberDescriptionSubframe BuildCut And ChopHopper BuildCabBuild2026319Assy Air Ram Auto Blanking X 3026321Assy Air Ram Rear Boom L/H X 4026320Assy Air Ram Rear Boom R/H X 5022587Assy Air Ram Side BrushX 6031159Assy Air Ram Side Brush Large DiameterX 7030501Assy Blanking Flap Valve Single Vm Minor 8034783Assy Brake Pedal Lh Vm Minor Fl X9034784Assy Brake Pedal Rh Vm Minor FlX 10036349Assy Brush Control D/S No Hp Opt Mer/Mag X 11024553Assy Brush Core 1300 Large Widesweep X 12024554Assy Brush Core 1300 Small Widesweep X 13023169Assy Brush Core Large 7000 X 14025662Assy Brush Core Large 80/85 X 15032482Assy Brush Core Magnum Poly/Wire Mix X 16 17 18 19034784Subframe Build 20023169Cut And Chop Sheet1 [HtmlMaker 2.41] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.

Need to convert price on transactions throughout the year to different currencies - using historic currency exchange rates.

Entered data in columns A-D:

Date1 | Value1 | Date2 | Value2 |

Required Formula to generate column E for each row individually (to 2dp using d/m/y format):

Value1xValue2whereDate1=Date2

Date1/Value1 will be prices on certain dates while Date2/Value2 will be historic exchange rates for every day of the year.

I have a 10x10 table. First row contains column titles (plain text, hardcoded). Each line below them has a 1 in *just one* cell. So, each line contains 9 zeros and one 1.

In the 11th column I want to check which column has the 1 in it and return the column's title. So, if the 5th row has a 1 in cell E5 I should get, in K5, the value of E1 (the title of the E column that is).

I am having trouble using teh find method. I'm using it to search for a string in a column, then give me the row number, which is fine when the string is found, but when it is not I get an error of "variable not set." I'm pretty certain it is returning void, but how to I capture that? Here's the

voucher_row = Worksheets("Table").Columns("D:D").Find(voucher, LookIn:=xlValues, LookAt:=xlWhole).Row

"voucher" is a string.

Copyrights 2005-15 www.BigResource.com, All rights reserved