I have a worksheet with about 20 columns of info. First of which is a primary key. Call it "Job Number." I would like to create a macro that runs down the list of primary keys searching for a specific Job Number I ask for in the new worksheet, in A1. It then copies and pastes the entire row where it found that job number into the new worksheet starting at row 6.
View 7 Replies
I have an Excel WorkBook with 100 WorkSheets.
Each Worksheet has a unique identifying label - "Requirement Number"
Within each worksheet is free form text data of the following categories:
Requirement: 10358
Title: Customer requirement 1
Text: This describes the requirements for a product for the customer[code].....
The text of the categories may begin in column A or B
What I need is a macro that will search each worksheet for a category, e.g., "Configuration:", copy the row where the keyword "Configuration" is found, and then have that row transposed and pasted to another WorkSheet (e.g., "Extracted Data") cell.
Data extracted from the next Worksheet would begin a new row in "Extracted Data"
Example:
Requirement1 Title Text Verification Method-Level ...
Requirement2 Title Text Verification Method-Level ...
Requirement3 Title Text Verification Method-Level ...
The Requirement# is best extracted from the WorkSheet tab since some of the worksheets are missing this information.
I can provide an example spreadsheet, however, I was not able to figure out how do that in this post.
I found a thread similar to this problem:
find and copy row
However, it only finds, copies and pastes for one keyword.
I am looking for a solution to an otherwise very tedious problem.
I have an Excel WorkBook with 100 WorkSheets.
Each Worksheet has a unique identifying label - "Requirement Number"
Within each worksheet is free form text data of the following categories: ...
I have a table with subtotals that I need to find the largest value for the subtotal results and then return the cell contents for the corresponding row.
I have attempted to use the hlookup function, but keep getting a #ref error (probably because I am just not that familiar with the entire formula requirements).
I attempted to nest in the 'largest' function to the lookup function, but have so far been stymied....
I'm trying to develop code that will perform the function in the title. I want to use an if statement that looks at cells across the worksheet and where it finds certain text it should colour the entire row. I would also like to be able to input the text via a user box. I don't necessarily want the code
View 3 Replies View RelatedI do receive invoices from my vendors. They send me an invoice in PDF formate. I am using able2extract software to conver the PDF to excel. It is working great but most of the times my vendors enters the items/Case in the description field. Like the example below:
"Bajri Rotla 11 oz.(24)"
I would like to place a "," in between the last character and begining of the first number. In the above case it will be after "a" (in Rotla) and before "1" in (11). If I can do this then I can apply texttocolumn from excel and use "," as delimiter and separate item name from size and case/Pack. Then can use another "Texttocolumn" and separate size and case/pack. If there is a VBA code that can be written for this it would make my life a whole lot easier.
Following are 3 images that I have copied from actual data.
1. Original PDF invoice data that I receive from my Vendor
2. Image of the excel file before formating. This is the format from "Able2Extract" (3rd party software that I use to convert PDF to excel. Works great!!
3. Converted Excel data sheet. This is the way I want to format the data.
Items in Column A1 are calculated by (B2/4+5)*1.4 Items located under the columns 2000, 3000, 4000, etc... 10,000 are calculated by taking the top number, eg 2000/(A1 cell value)+the column B number. 2000/7+0 = 286 (rounded numbers)
I need to find an way to look up for x number (2000,3000,4000, etc...) find the smallest number in that column and then return the value in column A1.
Cell
A1 Number >2000300040005000600070008000900010000
70 2864295717148571000114312861429
84 24236148059971883795610751194
[Code].....
Attempting to find identical values in cells B3 & B4 located in another
worksheet titled "Density Chart" and to return the value in cell/column D.
The Density Chart values are located in column A & B and the value I want
returned, depending on the criteria entered would be found on the same row
but in column D.
Example...
Changeable Value in B3 = A123 (can also be completely alpha value and will
be different values each time the formula is used.
Changeable Value in B4 = 2.00 (always numeric value)
Density Chart information
ColumnA ColumnB ColumnC ColumnD
A123 2.00 55.555 65.555
A123 2.40 55.555 75.555
A123 2.70 55.555 70.555
B123 2.00 45.000 85.000
C123
D123
E123
etc
I have tried =if, I have tried =sum product ... at a loss
I'm trying to do in vba is search for a number and then return what the row number is for that number.
View 4 Replies View RelatedWorking with project information which is about 1,000 project. I have two worksheets one has the start date/finish dates for each phase of a project -Define, Measure, I, Analyze, Control. Depending on the date I need it to be read and insert a value in my summary worksheet. The summary sheet contains the 12 months. I need the formula to read two columns start/finish, if the month is the same as the header in the second report return a letter of D, M, I, A, C if not leave blank.
View 9 Replies View RelatedI'm using the LOOKUP function to find the largest number and then return the name from a different column, it looks like this:
=LOOKUP(LARGE(round1!$F$2:$F$65,1),round1!$A$2:$A$65)
but all I get is hashN/A?
I am working with data where I need to extract a 10-digit number from a string. Where the 10-digit number is in the string varies, so I can't use a simple left/len combination. Here's an example below:
Something and email@me.com 1234567890 stuff thingsThe formula I am using now is this:
=MID(F4,MIN(FIND({0,1,2,3,4,5,6,7,8,9},F4&"0123456789")),10)
This finds the first number in a string and returns that number and the next 9 digits for a total of a 10-digit string (so it would return 1234567890). However, I run into an issue when I have a string that has numbers in the email address.
So this:
number in email123@me.com 1234567890 exampleWould return this:
123@me.comIs there a way to modify the formula above so that it searches for 10 consecutive numbers and not just the first number in a string?
i got worksheet which i store a list of all filing number in the same Col "R"
The combination of Filing Number Example
1) Invoice Filing Number = Inv2014070001 and continual
2) Purchase Order Filing Number = POD2014070001 and continual
3) Sublet Filing Number = SLT2014070001 and continual
Currently i am using a code which it can find the last filing number return to my userform textbox and increase the last number by 1. but this code can only return the very last filing number.
i need to find all the missing filing number in between all the filing number in Col R and return it to my userform listbox
VB:
If me.Remark.Value = "Sales" Then A = "Inv"
If me.Remark.Value = "Purchase" Then A = "POD"
If me.Remark.Value = "Sublet" Then A = "SLT"
Y = Me.TransYear.Value
myName = UCase(A & Y)
[Code]...
I'm writing a macro that will import data from one workbook to another, based on yesterdays date. I have the import functionality working, and I've been playing all afternoon, but I can't find a way to find yesterdays date in a range and use that row number as the row offset value in this line:
Rather than having a set row offset value (in this case, 14) I would like to use the find function to lookup yesterdays date in range "B50:B80" in the worksheet I've designated as "sh1" and return the row number of the cell that has yesterdays date and use this value as the row offset value, replacing the hard coded 14 that is in there currently. The date values in the range are formatted as per Date Format.jpg.
I have more than 1000000 coordinates with heights to sort through. The aim is to be able to give a specific radius and check all coordinates within this radius if the slope is more than a maximum slope. If this is the case it need to put the value (in this case) 100 in a new column. The reason for this is we have a reasonable flat terrain but the entire area is filled with Anthills. I need to sort the data. Normal ground points (No Anthills) should be labelled/coded as 200 and anthills as 100. This will allow my program to know the difference between the ground and anthills. In the tab "Input Sheet" I have a small portion of co-ordinates starting from row 8 to row 53 (this will have to extend all the way down to the last row in excel). I need to copy each row starting with row 8 (C8:E8) and paste it in row 2 (C2:E2). Column H indicates if the points are forming an anthill and the code needs to change. I have my final answer in the tab "Final Answer" that I require for my program. Is there any way I can write a VBA code that will check all the point instead of doing it manually.
View 4 Replies View RelatedI am trying to create a formula for a work report and I am afraid I am a bit of a novice with the more complex formulas. Here is what I am trying to do: Sheet 1 has Sales order numbers that duplicate based on the sales lines. Sheet 2 has single lines of sales order numbers and their assigned PO number. I would like to have Sheet 3 where it combines all data and duplicates and fills in the PO number to match all of the sales order numbers that repeat on the other sheet. I hope this makes sense. I can't seem to figure out if I need a VLookup or If or Match formula (or all of the above).
View 1 Replies View RelatedI have two spreadsheets.
spreadsheet 1:
Lookup from Order numbers listed from A5:A177.
requested formula in I5: I would like a lookup to sheet 2 based on the order number (F19:F191), to return the cell above the first non-blank value.
spreadsheet 2:
Lookup value:Order number listed from F19:F191.
Data search:AY19:CI191
return the (date) which is in the range above the data search from row AY18:CI18.
I've had a look at few forums but i'm getting mixed responses, having to use index / match / lookup / min / --.
I've created a userform that has one ComboBox (ComboBox1) and two text fields. I am trying to get the userform to return information to my worksheet in the same row as the name that is displayed in the ComboBox. This is my VBA code.
Private Sub Cmdpayment_Click()
Dim iRow As Long
Dim ws As Worksheet
Set ws = Sheet4
iRow = Cells. Find(What:=Me.ComboBox1.Value, After:=C5, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
ws.Cells(iRow, 12).Value = Me.txtpdate.Value
ws.Cells(iRow, 13).Value = Me.txtpayment.Value
Me.txtpdate.Value = ""
Me.txtpayment.Value = ""
End Sub
Let's say I have a value (N) in Cell A1 of Sheet 2 in Workbook A.
What I want to do is to Find the row number of the first cell and last cell that contains the value (N) in Sheet 1 of WorkBook B.
I believe this rightmost column number information is available. I just could not find it!
View 3 Replies View RelatedI have the following text
BKG 4.0 CL G 3210x2550 LS 28 PKGL NE
BKG 6.0 CL G 3210x2250 LS 25 PKGL NE
FAB 6.0 AB G 3300x2440 LS 16
FOP 4.0 BZ G 3210x2250 LS 28
FWH10.0 WH L 3210x2550 LS 9
I need a formula which searches within the text to find "LS" and then to return the number after it, this would be either 1 or two digits.
I am thinking if there was a forma that searched for "LS " (Note the space) and then returned the next two digits from the left from the found search ("LS ". I have attached a spreadsheet.
how do I search the whole text of one cell in a particular column to another cell in a different column? I then want to return the full contents of the cell that contains the text I want to find. Ie. if I want to search the text "fidelity", cell A1 in column B which contains a cell with text "fidelity asset management". I want to return fielity asset management.
View 7 Replies View RelatedHave problems using find and the Dictionary
What Im trying to do is find a certain word in a string then return the number associated with that word
Is there a formula that will allow me to look for the existence of any number value in a row of one worksheet and then return a specific number value in a cell on another worksheet? For example, if the formula finds any number value it will always return the number 15 to a cell on another worksheet.
View 3 Replies View RelatedI have a sheet with Customer name in the first column and next 7 columns have unique serial numbers(alphanumeric) of the systems which that customer has purchased. In another sheet, i have the unique serial number in first column and I want to search this number in the 7 columns of other sheet and return the "Customer name" to this sheet. How do I do that ?
Vlookup searches only in 1 columns, so does match index. lookup didn't work as well.
in Excel 2010, whether using VBA or otherwise;
1) how can I return the oldest date in the entire workbook (or at least in the entire sheet if it's not possible to find that date in the entire workbook).
2) how about the most recent date ?
I need a macro that will search a value in column D (sheet2) that is noted in cell C7 on sheet3. After that it must copy enitre entire row where searched value was found to sheet3, last empty row.
an example:
entered value in cell C7 on sheet 3 is ABC
on Sheet2 column D, value ABC was found in cell 150 (D150) so it has to copy for 150 to sheet3, last empy row.
I need a macro that does a find from cell C7 to C954 that has a 0 in the "Find what:" and does it with the "Find entire cells only" checked off.
Is this possible. I have searched the forums and not found this yet.
I've a worksheet containing a list of items some of which need deleting. These are identified from a particular range where users input "y" to notifiy the record can be removed. The code below works just fine if all I do is Clear the cells containing "y". However using: Range(rCell.Address).EntireRow.Delete
the macro stops after deleting the first item. It suddenly believes there aren't any further items to delete and Ends. There are no error messages returned. Entire macros is below.
Sub unreg_report()
Dim rRange As Range, rCell As Range
Set rRange = Range("unreg_list").SpecialCells _
(xlCellTypeConstants, xlTextValues)
For Each rCell In rRange
If rCell = "y" Then
Range(rCell.Address).EntireRow.Delete
End If
Next rCell
End Sub
VBA for finding text through an Excel SS and deleting the entire row if the text is found.
For example if the string "STAD LLL" is present in any cell in any string position the entire row is then deleted.
