I have a calendar where the user inputs the day Jan 1st starts on. This will then input the date on the following days. I need a formula to find when the 31st of Jan is and input a 1 for the 1st of Feb against the relevant day it lands on. See file attached.
View 5 RepliesI have a userform with two pop up calendars (calendar1 and calendar2). Calendar1 is the "start date" and must be a Monday. I have this portion working fine. If they select a date other than a Monday an alert message will pop up notifying the user a Monday must be selected. I need to limit the user to a date selection in calendar2 to be a minimum of three years out from Calendar1. I would like an alert message to pop up in Calendar2 should the user select a date inside of my three year minimum. Am I even in the ballpark with the following:
If Trim(Calendar2.Value) < (Calendar1.Value + "not sure here") Then
Calendar2.SetFocus
MsgBox "Select End Date 3 Years Out From Start date", vbExclamation
say sheet 1 has 2 collums A & B
collum A is Names Collum B is Dates
A B
Bob Fenton 05/04/08
Rob Smith 05/06/08
Al Feth 05/08/08
Al Feth 05/18/08
Al Thomas 04/23/08
Rob Smith 05/23/08
Bob Smith 04/22/08
Bob Fenton 05/15/08
Al Feth 05/10/08
sheet 2 has unlimited collums in collum A is the name of the person in collum B to Z (or more) i would like a fomula that will search sheet 1 and return the dates for each entry of that name.
so sheet 2 would be like ....
I've attached a workbook which contains two sheets:
PAYM
DEVICE_PAYM
Data is updated on DEVICE_PAYM each day with the figures I need located in column "AN". I need to be able to copy the data from "AN" and paste it into a column on the PAYM sheet. The destination column on the PAYM sheet needs to be specified by inputting a specific date - ideally, I would like to use the calendar Add-In as part of this process. I've already input some code for the calendar but am unable to develop this further so that it finds the correct date column and pastes the data across from the other sheet.
I am having a problem where imported data from access will not be refreshing in a cell. It will not perform a calculation using the imported data. What the code does is import the data into a cell, then if the label of the row is not empty, perform a calculation. The weird thing is, if I open the VBA editor and go through my code line by line hitting F8, it works as I would expect. It is only when I run the macro either as a button or with the control toolbar that it will not work properly. I am not very experienced with VBA
Sub DrivesByAutomationByDonorGrp()
Worksheets("Mkt Penetration_DonorGrp").Range("C4:F2005").Clear
Worksheets("Mkt Penetration_DonorGrp").Columns("F").NumberFormat = "0.00%"
Worksheets("Mkt Penetration_DonorGrp").Columns.Hidden = False
'Columns("C:E").Select
'Selection.EntireColumn.Hidden = True
Dim qt As QueryTable
sqlstring = "select [Drives Without Automation], [Drives With Automation]" _
& " from qryDrivesByAutomationByDonorGrp"..................
Example. I have a range of information on sheet 2 in cells A1:A25 that contains values that are text. Another range in B1:B25 that has numerical values. I would like to link the last value entered from those ranges to cell A1 & B1 on Sheet 1. Is there a formula option to do this?
View 5 Replies View RelatedI have a program where I can update the calibration due date of an item. I have attached a cut down version of my program showing the relevant areas. There is usually password protection on the worksheet so it can only be edited via the form (the vba coding removes the password protection before editing, then re-enables the password protection after editing). The "Update Calibration" button is usually on a "Menu" sheet.
Once the form is opened a serial number is typed in the textbox. The calendar button is then clicked, which brings up another form with the calendar on. The due date is selected on the calendar. When "OK" is clicked, the date label caption is then changed to the selected calendar date. When "Submit" is clicked, the spreadsheet will search for the Serial Number, once found, the label caption (being the date selected) will be entered into the cell to the right of the serial.
If the day selected on the calendar is greater than 12 the date is entered correctly onto the sheet. example: calendar date selected = 15/01/2010. shown on sheet as 15/01/2010. However, if the day selected on the calendar is 12 or less, the date is for some reason entered incorrectly onto the sheet. example: calendar date selected = 08/12/2010. shown on sheet as 12/08/2010???? What is going on here? how come the day and month are swapped around if the day is less than 12????
Using Excel 2007 Calendar Control:
I want to select a date of choice from a calendar in a field within an Excel spreadsheet.
I do not know how to do userforms and so that is why I wonder if I can add this in just a spreadsheet.
This is how far I have gotten so far: After doing the following, I have a static calendar setting in my spreadsheet like a text box showing the current date.
Developer
Insert
More Controls
Calendar Control 12.0
i need to identify the first and last duplicat entrys and delete all rows in between.
eg keep row 275 and 277 and delete row 276 all duplicates only in column C ..
I've got a spreadsheet with various amounts in cells A3:L5. I want to find the last non-blank entry in each row but only where the entry is in a column headed "Guaranteed PRB" (found in row 1). Then I want it to return the column header title found in row 2, which is a date.
I've attached a sample of the spreadsheet with the expected answer in column M.
I've got as far as formula:
=LOOKUP(2,1/(a3:l3<>""),$a$2:$l$2)
how to also make it look at row 1's headers too.
I m trying it out I find in the Win, Loss, Draw columns when there is no entry the formula leaves a 1 when there should be a 0 in the Draw column.
View 4 Replies View RelatedA stab in the dark here, but is there any way to be able to 'jump' to a particular position within a filtered list. My list has around 20,000 items in it and I'm having to go through each one systematically to make edits on the relevant line and it is so laborious trying to find the correct place in the list every time.
Is there anyway to be able to may be key in the first letter or two letters to avoid all the continuous scrolling to find the relevant entry?
i had this formula at one time but lost it.
i am trying to figure out how to evaluate a column and get the cell address of the cell with the last entry
example
--A
1 e
2
3
4 g
5
6 h
all other cells under A6 are blank
the answer is A6
Dim lCount As Long
Dim rFoundCell As Range
Dim sfind As String
Dim cl As Range
Set rFoundCell = Range("A1")
For lCount = 1 To WorksheetFunction. CountIf(Columns(1), TextBox1.Value)
Set rFoundCell = Columns(1). Find(What:=TextBox1.Value, After:=rFoundCell, _
LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, _
SearchDirection:=xlNext, MatchCase:=False)
With rFoundCell
End With
Next lCount.........................
this macro looks up in column A (a list of names) the name entered in textbox1 (of userform2). if found - the value is "copied" to E13. (if not - showes message - " does not exist") for example: it found the value "Dainna" (which was typied in textbox1) and copied it to E13. i want the macro to keep on to the next cell (in the row where Dainna's in- B3) and copy the age to F14.
I want to find the Row Number, not necessarily the cell value, of the last non-blank entry in a Column.
If the address of this row is found, then that could also be useful. I believe there are some simple Excel functions to do this, maybe involving the X1Up feature. I've searched the threads and haven't found a clear answer this.
Below is code that I custom wrote, but its long and tiresome to use.
'The purpose of this sub is to find the last filled row in a column
'Knowing this last row is useful for telling later
' looping operations which row to stop on.
'The logic of this sub is that it will look down a column.........
I am using a great pop up calendar without ActiveX made by a guy called Phil Johnson. When you click a specified cell the calendar appears. The only problem is that the calendar doesn't default to today's date when it opens.
I have the original file Calendar source code if anyone needs it.
I'm trying to find a formula that will find an original entry using 4 criteria original entry is cases ordered.
columns A,B,C,D will have to match then give me a result in column E to find original entry if there is one otherwise I will have to enter new row and original entry for cases ordered.
Eg.
A = section
B = description
C = size
D = region
E = cases ordered
Row 2 = fruit, apples, medium, north, 25
Row 45 = fruit, apples, medium, north,
I have a percentage in R3.
If I make an entry in D13 then I want the R3 to be duplicated into C27 otherwise C27 should be 0.
I am having a sheet where I keep track of when online surveys have been sent to users. The users enail address (column K) may be on the list for several times, but I need to make sure that there is at least a 7 days pause between sending the first mail and the second, depending on the visit date (column G).If there are less than 7 days between two entries with the same email address, the user is not qualified for taking another survey.
I was thinking to write an IF formula which returns either 1 or 0 and then let conditional formatting highlight and HIDE the row via a VBA loop.
Is there a formula that will allow me to look for the existence of any number value in a row of one worksheet and then return a specific number value in a cell on another worksheet? For example, if the formula finds any number value it will always return the number 15 to a cell on another worksheet.
View 3 Replies View RelatedI currently have a worksheet that when a user clicks on the cell, a calendar form opens. From here they can select a date, click ok, and the date gets placed in the corresponding cell they clicked on.
Now if the user needs to change that date, i want them to be able to click on the cell again, and when the calendar opens, the date in the cell would be selected on the calendar. I was able to do this in a userform, but im not sure how to edit it to work on the worksheet. I am using the below to populate the calendar.
Code:
private sub worksheet_selectionchange(byval target as range)
if not intersect(target,range("aa16:aa24")) is nothing then .show calendar
When the user clicks the date, the below code places it in the cell.
Code:
private sub ok_click()
with active cell
.value=calendar1.value
end with
unload me
end sub
Now the below code was used when I was using a userform, but im not sure how to edit this to pull the date from the active cell.
Code:
privatesub userform_activate()
me.calendar1=date
if not tb is nothing then
if isdate(tb.value)then me.calendar1.value = tb.value
end if
end sub
I used a form with textboxes for data input for one of my vb macros. Currently I have the private sub from the form transfer those entries to a remote cell on the spreadsheet, (like in column "HZ"), so that the macro that will actually utilize them can retrieve them. Is there a way to pass that data directly from what is entered in the form in the textboxes to the macro that will actually use them?
View 4 Replies View RelatedI want the script to find if the value entered in the form is matching the values in column 'A' in the database and if it matches then it needs to select the cell as active cell - to populate the form details. And if there is no matching value found, the script needs to select the last empty cell of the column 'A' to populate the data entered in the form.
1) Form has 10 different fields that needs to be filled by the user.
2) Field 1 - is a text box for 'Request #' to be entered by the user.
3) After filling in all the fields - once clicked on OK, the form should search for the the 'request #' entered on the form in the database (Form and the database are in the same workbook).
4) If the 'Reqeust #' in the Column 'A' matches the the 'Request #' entered in the form, then the matching cell should be selected (Activecell -Were the data can be overwritten, with the new entry)
5)If there is no matching 'Request #' found in the database, the script should loop to select the next available blank cell in column 'A'. So that the form data can be entered.
I am looking to create a macro that will create a new sheet when data is added on a summary sheet. Example.
1. Summary sheet called "Variations" contains columns that will contain the information needed for new sheet (Columns A to D)
2. When data is entered on "Variations" sheet: Column B, then macro automatically creates new sheet renamed to e.g. VO1 (Number used on "Variations" tab) and is a copy of "Master" tab.
3. Data entered in Column A to D on "Variations" tab is automatically entered onto new sheet created (e.g VO1). Shown is blue on attached file. Additional data is updated on "VO1" sheet and this then links back to "Variations" tab
i have an address that is all in one cell displayed like
101 hampton Court, Hampton heath, Hampton Town, Hamptonshire, HA01 1AS
but i need to have it split in to individual cells so
Cell A1 would be 101 hampton court
B2 Hampton Heath
C2 Hampton Town
D3 Hamptonshire
E5 HA01 1AS
each part of the address is split by a comma, so i have tried to use that as a identifier as to where that part of the address is, but failed on that, i can separate out the first part and the post code with a find and replace but not the middle.
also i need it to work backwards ie
it finds the post code first,
then the county
then the town
as those 3 are always the last 3 parts, but the address could only have 1 line of addres beofre the town or 3, and it would get messed up as all the post codes, county ans town needs to be in their respective columns
I have a spread sheet that requires people to put dates in certain cells. I was wondering if it is possible to have a small calendar pop up when the cell that requires a date is clicked on. The calendar would need to show the current month, and future months for the calendar year. I’ve seen this feature in OneNote 2007, and wasn’t sure if this same feature could be created for excel. I’m not sure if this can be done by a macro or not.
View 9 Replies View RelatedI have a few excel calendars.
I was wondering can I take a calendar and then put hyperlinks or vba to make a sheet if clicked on.
So If I click on an icon on a date, it will copy a certain template sheet, then link it to that date and that icon.
See an excel calendar, I have a few others to play with aw well.
But this one gets updated on the same the page and not sure how the links/icon would follow the dates. I was hoping for maybe 3-4 different icons on a date.
Attached is the file wherein I am trying to make the scheduling gantt for UAE calendar where the weekends are Friday and Saturday. I am not able to format sundays as workdays some how through my conditions.
View 2 Replies View RelatedIs there any simple way to build a calendar in Excel? Ideally, all events will be listed on one sheet by date and the calendar will display the events on their respective dates. Is this possible?
View 2 Replies View RelatedGot this neat Calendar from another thread on this site,but it has problems. Played around with what little skills I have with no luck. When you open the calendar go to Jan, 1992 click on first four days and everything works. When you click on Thu 2 the problem begins.
View 14 Replies View Related