Is there a formula that will allow me to look for the existence of any number value in a row of one worksheet and then return a specific number value in a cell on another worksheet? For example, if the formula finds any number value it will always return the number 15 to a cell on another worksheet.
View 3 RepliesIt's a spreadsheet of about 300 rows, each row corresponding to a certain department. each row is filled with various data, both text and numerical, including various different scores and averages. the columns include daily scores and weekly averages. I want to be able to create a new column that will calculate the time (in days or weeks) since the last score/average was entered.
1. a formula that will return the address of the last numerical entry in a given row. (I've got a MATCH formula that will do this, although it doesn't let me specify different cells or ranges, only the entire row)
2. whichever cell is returned will give the date instead of the value. (for example, if the last value entered is in $F$63, and Column F is headed 23/11/09, then the formula will give the date)
3. then finally, calculate the time between that date and the present time
I've tried various different things, both in normal Excel and the VBA editor, and I'm beginning to think maybe this isn't even possible.
say sheet 1 has 2 collums A & B
collum A is Names Collum B is Dates
A B
Bob Fenton 05/04/08
Rob Smith 05/06/08
Al Feth 05/08/08
Al Feth 05/18/08
Al Thomas 04/23/08
Rob Smith 05/23/08
Bob Smith 04/22/08
Bob Fenton 05/15/08
Al Feth 05/10/08
sheet 2 has unlimited collums in collum A is the name of the person in collum B to Z (or more) i would like a fomula that will search sheet 1 and return the dates for each entry of that name.
so sheet 2 would be like ....
Trying to write a formula that looks for the first number in the same row, then returns the value in that column in a different row. In the example included, cell A-7 should contain the formula. Within row 7, determine the column where the first number is listed (column D in this case), then return the value listed in row 3 of that column ('C' in this case).
I've tried Lookup, Index, and Match functions, but can't seem to get the right combination.
I am trying to enter the following formula into cells on a worksheet change event but it errors out.
formula to input is: "=IF(H$10="",($H$8/12*K$8),($H$8/12*K$8)+H$10)"
I have used the following format to do this: ....
I have a percentage in R3.
If I make an entry in D13 then I want the R3 to be duplicated into C27 otherwise C27 should be 0.
I am having a sheet where I keep track of when online surveys have been sent to users. The users enail address (column K) may be on the list for several times, but I need to make sure that there is at least a 7 days pause between sending the first mail and the second, depending on the visit date (column G).If there are less than 7 days between two entries with the same email address, the user is not qualified for taking another survey.
I was thinking to write an IF formula which returns either 1 or 0 and then let conditional formatting highlight and HIDE the row via a VBA loop.
I used a form with textboxes for data input for one of my vb macros. Currently I have the private sub from the form transfer those entries to a remote cell on the spreadsheet, (like in column "HZ"), so that the macro that will actually utilize them can retrieve them. Is there a way to pass that data directly from what is entered in the form in the textboxes to the macro that will actually use them?
View 4 Replies View RelatedI am looking to create a macro that will create a new sheet when data is added on a summary sheet. Example.
1. Summary sheet called "Variations" contains columns that will contain the information needed for new sheet (Columns A to D)
2. When data is entered on "Variations" sheet: Column B, then macro automatically creates new sheet renamed to e.g. VO1 (Number used on "Variations" tab) and is a copy of "Master" tab.
3. Data entered in Column A to D on "Variations" tab is automatically entered onto new sheet created (e.g VO1). Shown is blue on attached file. Additional data is updated on "VO1" sheet and this then links back to "Variations" tab
I've got a spreadsheet with various amounts in cells A3:L5. I want to find the last non-blank entry in each row but only where the entry is in a column headed "Guaranteed PRB" (found in row 1). Then I want it to return the column header title found in row 2, which is a date.
I've attached a sample of the spreadsheet with the expected answer in column M.
I've got as far as formula:
=LOOKUP(2,1/(a3:l3<>""),$a$2:$l$2)
how to also make it look at row 1's headers too.
I'm currently using the formula
=IFERROR(INDEX(startmonthsp,MATCH(TRUE,INDEX(ISNUMBER(E2:AR2),0),0)),"").
The startmonthsp name refers to the months across the top of my pivot table. This formula works but I now need one small change. If the value in the columns are zero or less then I do not want the formula to return that column header (bypass it until it gets a positive value above zero).
Attached is a workbook that shows my formula in action.
Excel Forum Question.xlsx
I've a long list of value with indicator which I need to compare with an entry after which it need to return a text indicator. I'm using IF and MATCH function.
Following is the code I use:
=(IF(MATCH(C1,$D$5:$D$29,0)<=5,$E$9,IF(MATCH(C1,$D$5:$D$29,0)<=10,$E$14,IF(MATCH(C1,$D$5:$D$29,0)<=1 5,$E$19,IF(MATCH(C1,$D$5:$D$29,0)<=20,$E$24,IF(MATCH(C1,$D$5:$D$29,0)<=25,"Not Found"))))))
I've attached an excel file with an sample. Btw, Is there anyway I can omit the length of IF & MATCH function by using other function.
I have a set of data which is the total monthly sales whereby each customer has several entries.
I have created an automated invoice through a vlookup system, yet i encounter the problem that i need to return each entry for the same customer into the automated invoice. But my vlookup will only return one entry for each customer as it is looking up the customer code and just brings back the first one it encounters, is there any way to bring back all entries for each client?
I have an order form created in excel with a list of about 1600 products. I have a column set up for the customer to place the ordered amount of each product. What I need now is a way to transfer only the rows that have a value in the "ordered" column to a new sheet. I have seen it before , but don't know how it was accomplished.
View 1 Replies View RelatedBasically i have a list of 24 invoice #'s with cost/pounds/etc.
I need a macro that would look at a list from a sheet ( Temp Sheet ).
count the number of invoice
create a tab named the invoice numbers.
So basically, if there are 24 invoice #'s. I would have 24 tabs created that are named the invoice numbers.
I have tried to make a VBA that would allow me to type in:
10657 and have the VBA to automatically convert that into a timeformat -> 1:06:57.
It works ok as long as the typed number is 4 digits or shorter.
If i type 12345 I would expct to get 1:23:45 but I get 00:00:45
Private Sub Worksheet_Change(ByVal Target As Range)
Dim VaValue As Variant
TCol = Target.Column
If Not (TCol = 5 Or TCol = 6) Then Exit Sub '
Is it possible to make a textbox entry be a number.
I have a text box on a sheet and i have linked it to a cell on a different sheet.
The problem I am having is that when I enter a number in the text box say 2.8 it is stored in the linked cell as text. is it possible to have the entry be number as I need it to be a % and used in other formulars?
I have a worksheet with two dropdown menus. The first contains months from January to December, the second contains years from 2011 to 2025. Upon opening the worksheet, I would like the entries selected to match to the month and year of the current system date. I know this is relatively easy to implement but, unfortunately, the macro recorder is of no support here. How to refer to dropdown menus in an Excel worksheet and how to select a specific entry from the dropdown menu?
View 4 Replies View RelatedI have a worksheet that, unless a form for data entry is activated, should be read-only for columns 'A' thru 'M' and 'O' with column 'N' left editable.
The form is activated by a button with a macro assigned to enter the data in the above columns when the form is closed. This has been compiled and works nicely with the sheet unlocked, however, as i need certain columns to be read-only unless the form is activated, i'm stuck with leaving the whole sheet unlocked for editing with or without the form being activated.
Is there any way a VBA code could be used to unlock the worksheet columns that are read-only when the form is activated, and then lock them once the form data is entered to the worksheet and the form closed?
I have a entry form in which i want to register customers. the first field is the customer number (which is unique(created by me) for every customer). This is TextBox 1 in the document. I would like to search for duplicates in worksheet 2, collumn A, when pressing "enter" to move from TextBox 1 to TextBox 2. A search for duplicates should start and a message should appear " duplicate found" if found, otherwise continue to TextBox 2 for further entry of information.
Please see my attached document for clarification.
I know that there is a lot on locking cells but it is confusing to me. I am able to lock a worksheet but that is not what I need. I have an Excel document that has thirty to thiry-six names on it. I do not want anyone able to edit the names. But I do want them to be able to add a name.
Example:
There are 30 students in the classroom. A new student comes in. I want the teacher to be able to add that student to the roster but not able to edit the names above. What do I need to do?
I have multiple worksheets of computer equipment, each worksheet is a group/department. Column H is the serial number column and the entries have to be unique. I have managed to create the code below which does find duplicates across worksheets.
When error message pops up about which sheet the duplicate already exists on, the duplicate entry is deleted and the cell is blank but the error checks again and reports the blank existing on another worksheet and then it is stuck in a loop. How can I ignore the blank or null.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim I As Integer
I = Sheets.Count
If Not Intersect(Target, Range("H2:H200")) Is Nothing Then
Do Until I = 0
If Application.IsError(Application.Match(Target, Sheets(I).Range("H2:H200"), 0)) Then
Else
MsgBox "That entry already exists in the " + Sheets(I).Name + " sheet"
Target.ClearContents
End If
I = I - 1
Loop
End If
End Sub
I've been given a spreadsheet that is poorly constructed but I'm not allowed to alter.
The layout is:
Box Name Box Date ID1 ID2 ID3 ....
Where there is not a fixed number of IDs in each box
(There are five different sheets so I'll have some fun concatenating results)
Given a list of IDs I need to return the box name and box date that the ID's file sits in. The spreadsheet has blanks everywhere and the numbers contained in rows are non-consecutive and smaller values can appear later in a column than larger ones.
I think I need some combination of index, offset and maybe sumproduct? TBH, I avoid sumproducts like the plague, preferring to utilise sumifs and dynamic named ranges since this improves clarity so I'm basically a newb at them.
Any skeleton framework that you think would work to return the text values for the LHS where the number could be anywhere? Once I can see a rough example I should be able to get to grips with the logic and wrangle it into the necessary solution.
I am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize()
If Not Range("dDate").Value = "" Then
TextBox2.Value = Range("dDate").Value
TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM")
Else
TextBox2.Value = ""
TextBox2.SetFocus
End If
End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
So the title isn't really totally descriptive but it was all I could come up with. I have a work book that has 30 identical sets of 5 cells for users to enter in information. Some of my users will not need all 30 sets. I'm wondering if there is a way for the user to enter the number of cells they need and have excel then format so they have the desired number, instead of 30. Then have excel change all the instances of this number in formulas so that it matches the new number of cells. I hope I explained this well enough for someone to help.
View 9 Replies View Relatedway to set the format of an entry made in a txtbox (on a user form)
I have a txtBox that the user enters an amount, but when this is pasted in the excel workbook the number is stored as text and won't evaluate.
I've tried changing the formats... but the option to change teh valuse from txt to numberinc is not "codable"...
I want to find the Row Number, not necessarily the cell value, of the last non-blank entry in a Column.
If the address of this row is found, then that could also be useful. I believe there are some simple Excel functions to do this, maybe involving the X1Up feature. I've searched the threads and haven't found a clear answer this.
Below is code that I custom wrote, but its long and tiresome to use.
'The purpose of this sub is to find the last filled row in a column
'Knowing this last row is useful for telling later
' looping operations which row to stop on.
'The logic of this sub is that it will look down a column.........
I currently have a huge data sheet with multiple columns of information. It contains a list of projects organized by columns with information pertaining to each project. I've named this worksheet data.
On another sheet I've named Present, I'm trying to find a way to reference a single project at a time using a drop down list. The Present Sheet has a list of characteristics fields that need to be filled with information from "data" worksheet. I want the characteristics to change whenever I choose another project name from the drop down list.
hello. i'm new to excel and i'm really hoping for some serious help here. i have the basics down however i'm really stumped at this point. Let me try to explain my worksheet. the worksheet has a sheet for data which is used for drop list values in the new patient template sheet. the new patient template which is just that a blank entry sheet that the user duplicates and adds a new patient to the worksheet to track the visits made by medical staff. there could be over a hundred new patient sheets (each named by the patient) at any given time.
here is what i need help with: my sheet is setup on a monthly basis so each patient has a total of 4 - 5 weeks listed with entries for everytime a nurse visits that patient. what i need to know is how to search the cell entries for the first time a visit occurred and the date it occurred and this needs to be broken down by the 1st of the month - the 15th and then again for the 16th - the end of month for every patient sheet in the workbook. the ranges are not together that i need to search for example f14:f20, i14:i20, f35:f41 and so on for the first 15 days of the month. this all needs to happen like in a macro or somehow automatically.
content from form is captured via formulas to a CIMLoad format on another tab
Users keep entering four to six decimal places in weight value
I need to limit the cell to either whole numbers, or a maximum of 2 decimal places
The cell is formatted to two decimal places, but when you activate the cell it shows the full value they entered, and so does my CIMLoad
How to I limit the value in this cell to whole numbers or numbers with a maximum of two decimal places?